VCB/VADP, ESX 4.1 and NetWare vm snapshot backup issue

Hi!
If you are running Netware as a guest in VMware ESX 4.1 and are using backup
software that uses the snapshot feature to backup the guests vmdk then you
may run into an issue that causes the snapshot to fail. This was just
documented by VMware on Feb 23 (two days ago) so you may have not seen this
yet. Here is the url to the VMware kb:
http://kb.vmware.com/kb/1029749
The fix is to install the older v4.0 vmware tools into the NetWare guest.
Cheers,
Ron

Ron,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

VMWARE ESX 3.5 and Netware 6.5

I want to Install a Netware 6.5 server in VMWARE ESX 3.5 in a
IBM x3650 with 2 CPU quad core.
But the guest SO wizard don't allow me to install more than
1 CPU.
Why is that?

Generally, Netware doesn't benefit from a second CPU. Of course
there are occasions where adding another CPU improves performance,
but Netware is IO bound, not CPU bound.
Under VMware, Netware will definitely perform better with a single CPU.
Netware does not idle the CPU, so when running under VMware, the
VMware tools idle the first CPU. If there are 2 CPUs, the second CPU
will always run at 100 percent utilization.
Charles
"10789" <[email protected]> wrote in message
news:[email protected]..
>
> Thanks Marcel by respuesta.But I not sure that Netware perform better
> with a single CPU . Is that true ?
>
>
> --
> 10789
> ------------------------------------------------------------------------
> 10789's Profile: http://forums.novell.com/member.php?userid=8229
> View this thread: http://forums.novell.com/showthread.php?t=314249
>

ZFS shrink and Storage Array snapshot GUID issues - RFE status

Anyone know where the ZFS team is on the RFE's for:
zpool shrink (vdev evacuate)
Allowing zpool guid changes so that you can import a zpool that has been Cloned/snapshot (ShadowImage, Snapmirror, etc) on the same host
Edited by: 892985 on Oct 24, 2011 11:44 AM

Thanks, I am running this Areca 1320 in two other machines and this is the first I am encountering the issue. (hopefully its not the adapter). Nothing seems to want to just die anymore.
Anyhow I noticed these three errors:
errors: Permanent errors have been detected in the following files:
        <metadata>:<0x14f5d>
        <metadata>:<0x14f5e>
        <metadata>:<0x14f5f>Any way for me to correct these? This says metadata, so I am guessing it has something to do with the attributes on the file, like compression etc. So how would I identify which zfs attributes are at issue here? If I can get rid of the three errors I can at least get the array out of the degraded state.

ZFD401 and Netware 6.5.5?

Anyone had any problems with Zenworks 4.01 remote management after
applying service pack 5 to Netware 6.5? I am at a customer who said that
after patching the server they are having trouble with their windows xp
stations and remote control. They can remote into the machine once and if
they try to go back to it they get an error that the machine is already
being remoted.
I can't understand how a service pack on netware would
touch zen remote unless it had to do with an update to the ds version on
the server.
Thanks

Rob,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

NCF and Netware Remote Manager

Hi there.
Is there any issues with Novell client Firewall and Netware Remote
Manager inside my LAN?
When I try to access NRM on ports 8008/8009, for some servers I can
connect but for others I can't.
If I unload NCF, everything comes back to normal with NRM.
I have already created rules to allow these ports, but nothing.
Any ideas?

Brad Averbeck wrote:
> Are the servers on the same subnet as you? Do you have that subnet
> trusted? This is my situation and maybe that's why I don't have a
> problem with it. You could try trusting the server IP. You get
> there by clicking on the options button/system tab/settings button
> for Lan settings. Click on add and type in the IP address.
>
> Brad
>
>
> Carlos Almeida Jr. wrote:
> > Brad Averbeck wrote:
> >
> >
> > > I use NRM all the time and have had no problems. When you look at
> > > the activity, does it show a block for ports 8008/8009 and a
> > > reason?
> > >
> > > Brad
> > >
> > > Carlos Almeida Jr. wrote:
> > >
> > > > Hi there.
> > > >
> > > > Is there any issues with Novell client Firewall and Netware
> > > > Remote Manager inside my LAN?
> > > >
> > > > When I try to access NRM on ports 8008/8009, for some servers I
> > > > can connect but for others I can't.
> > > >
> > > > If I unload NCF, everything comes back to normal with NRM.
> > > >
> > > > I have already created rules to allow these ports, but nothing.
> > > >
> > > > Any ideas?
> >
> >
> > Brad,
> >
> > There is no block at all, at least I can't find any.
> >
> > I've looked at Firewall Log Viewer and there is nothing blocked. As
> > I said, I can connect to some servers, not to some of them.
> >
> > I have created a rule for ports 8008/8009 but it didn't work too.
Yes, the servers are on the same subnet.
I have the subnet trusted and I have added the IP of the server
especifically as trusted, and it is not working yet.

Arcserve r15 and Netware

I have a client that has a Windows 2000 server and Netware 6.5 sp8 server running Arcserve 12 for Windows as their backup software. They need to replace the Windows 2000. I am going to suggest that they run Windows 2008 Foundation Server. The latest version of Arcserve is r15. From what CA tells me they don't support Netware any more. My client still has an active maintanence agreement with CA. So I would just like to upgrade the Arcserve for Windows to r15. CA won't tell me if my current agent will work with r15 for Windows. Has anyone tried this?
This configuration is NetWare agent 11.1 sp3, Arcserve r15 for Windows and Windows Server 2008 Foundation.

On 31/08/2011 23:36, susantci wrote:
> I have a client that has a Windows 2000 server and Netware 6.5 sp8
> server running Arcserve 12 for Windows as their backup software. They
> need to replace the Windows 2000. I am going to suggest that they run
> Windows 2008 Foundation Server. The latest version of Arcserve is r15.
> From what CA tells me they don't support Netware any more. My client
> still has an active maintanence agreement with CA. So I would just like
> to upgrade the Arcserve for Windows to r15. CA won't tell me if my
> current agent will work with r15 for Windows. Has anyone tried this?
>
> This configuration is NetWare agent 11.1 sp3, Arcserve r15 for Windows
> and Windows Server 2008 Foundation.
According to
http://www.arcserve.com/us/products/...ns-agents.aspx there is
no Client Agent for NetWare (or OES2 Linux though there is one for
Linux) which fits in with what CA have told you.
However in checking Product Documentation for r15 @
https://support.ca.com/irj/portal/an...entationSearch (use
Find Other Product Documentation - CA ARCserve Backup - 15.0 - US
English) I came across a Client Agents Guide (Windows) @
https://support.ca.com/cadocs/0/c013181e.pdf. This is clearly labelled
Client Agents Guide r15 and references a Client Agent for NetWare.
The above would appear to suggest that there is either an agent for
NetWare available for r15 (which CA appear to have told you is not the
case) or an older agent will work.
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Samsung ML1651N printers and Netware 6.5

Using Samsung ML1651N printers with my 6.5 server, works great until a
support pack comes out, after installing and rebooting the Server the
ML1651 refuses to print from the Server based queue. I can print from the
Samsung software a test page no problem, i can ping the IP of the printer
but the printer and its in built print server seem to stop communicating
with the Novell Server. I have other network printers Brother HL1670N,
they are not affected. I contacted Samsung UK and they havent got a clue.
I remember a while ago a forum mentioning a possible problem with
iManager which after i uninstalled last time cured the problem, not this
time.

Simon,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses: http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

WA and netware upgrade

Currently running all my Groupwise on nw6sp5 servers, including
webaccess. Webaccess is setup on a server that hosts my web page too,
and is running apache 2.0.53 and tomcat 4.1.
Going to be upgrading this to nw65sp8 (hopefully) in the not too
distant future.
Any gotchas I need to watch out for? As my WA setup is not a
'standard' install, wondering if the NW upgrade will wreck everything
w/ apache & tomcat.
Any tips, suggestions, etc will be *greatly* appreciated.
TIA
Stevo

Stevo,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

TS1398 I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc.

I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
Thanks

Noooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!

HT1386 My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop and those are the songs I purchased via iTunes. How do I get the rest of the songs from iPhon

My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my iPhone back onto my HD.
The songs I'm not able to import casme from CD's. Nothing from napster etc.
I've tried and tried to import them rom iTunes vis "Library" " Import"

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I upgraded my 3rd generation ipad to ios 6.0.1 and now am experiencing various issues. Neither Pages or Numbers will open. I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone.

I upgraded my "new ipad" (the 3rd generation I think) to ios 6.0.1 and now am experiencing various issues.
1- Neither Pages or Numbers will open. I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone. The icon that allows me to create a new document also does not appear. I went to icloud.com to see whether my documents still existed, which brings me to the 2nd problem.
2- It appears that all of my Pages documents are still on icloud, but all of my Numbers documents are gone. There were only about 10, but I access 2 of them nearly every day, so this is a big issue for me.
I went into Settings and all of the icloud information is correct and it "Documents & Data" is on. When I look at the storage, I see the Pages documents but not the Numbers ones. The next thing I did was turn my ipad off and back on, but this didn't fix anything. Since my Pages documents are still on icloud, I then tried to delete the Pages app from the ipad so that I could reinstall it, which resulted in the 3rd problem.
3- I cannot delete any apps. I can get all of the icons to shake and the small x IS available, but everything freezes when I click it. I can't do anything at that point except reset the ipad or wait until it eventually restarts itself. I've tried this with Pages as well as multiple other apps, all with the same result. I've also tried downloading a new app (which worked fine) and then deleting that one, but I got the same result.
3a- A small related issue to this that I am far less concerned about is that when the ipad restarts itself, it comes back on and the screen is really dark and I can barely make out what appears on the screen. If I enter my password right away, it stays that way until I go into Settings - Brightness & Wallpaper and touch the brightness setting (although I'm not actually changing the setting because it already shows that the brightness is turned up a little over halfway). If I don't enter my password right away and let it go completely dark, then click the home button, the brightness is fine.
So now I'm stuck. My guess is that I will need to restore it, but wanted to check before I take that step. Unfortunately, my laptop is on its deathbed so I haven't been synching my ipad to it and I fear my Numbers documents are gone forever. I'd like to try everything I can to fix these issues before doing the restore in hopes that I can get the Numbers documents back.
Any suggestions for any or all of these problems?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

HT4847 I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accoun

I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.

Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

I am trying to restore a backup onto my iphone from itunes but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup?

I am trying to restore a backup onto my iphone from itunes on a pc windows 8 but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup? Any help is very appreciated

Try entering the password on your iPhone

Delivery Notes and CofAs we are having issues.

Hi , one of our users has the following problem:
==================================
I have recently had a printer put on the network that is compatible with SAP. When we generate CofAs or Delivery Notes from SAP, the printout font is now in courier and the letters/numbers are overlapping in some sections.
We need to have this fixed so the CofAs/DNs are legible.
Also, the DNs should be printing two-sided. They are not now. The printer is capable of printing two-sided.
==================================
Summary:
I printed out a Quality Notification and it prints fine. Only the Delivery Notes and CofAs we are having issues.
what could be the problem?
how could it be fixed?
please let us know.
Regards.

          I tried this option, but did not help. We have two weblogic servers on different
          machines. One works fine in downloading pdf file over https, but not the other.
          The error we are getting after selecting it to save it to a file:
          IE cannot download xx.pdf from www.xxx.com
          From the link, when we say "save target as", we get different error as:
          This file could not be written to cache.
          Someone suggested to pass "pragma: public" or "pragama: no-cache" in the header.
          But we are just simply serving it as a file, neither from servlet nor from jsp.
          So I suspect it something to do with our weblogic proxy or security configuration.
          Any ideas/help is much appreciated.
          Thanks
          Jayashree Raghavan <[email protected]> wrote:
          >If you ever have a similar problem it might help to check in browser
          >settings.
          >In IE goto tools/internet options/
          >Goto advanced Tab
          >go down to Security.
          >Uncheck the "donot save encrypted pages to disk".
          >This will make downloading a pdf work in ssl.
          >
          >
          >Jayashree Raghavan wrote:
          >
          >> We resolved this problem thanks to Maxim, by commenting out the code
          >that sends to the browser not to cache these pdf files. response.setHeader("Pragma",
          >"no-cache");
          >

VCB/VADP, ESX 4.1 and NetWare vm snapshot backup issue

Similar Messages

Maybe you are looking for