VCenter 6 fails to restart after IP change

I changed the vCenter 6 IP from within web client.
Since I had problems connecting to the new IP, I restarted the server via vSphere Client directly on the host using VMware Tools.
After the restart, I can't connect to vCenter any more. Trying to connect via https shows me the following error:
503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http20NamedPipeServiceSpecE:0x7f4158068bf0] _serverNamespace = / _isRedirect = false _pipeName =/var/run/vmware/vpxd-webserver-pipe)
Then I directly used the console, enabled ssh and bash and logged in there.
I tried to check the current IP settings via the script used in version 5.5 which still exists (/opt/vmware/share/vami/vami_config_net) but fails with multiple errors.
Then, I tried to reset the certificates via certificate manager (/usr/lib/vmware-vmca/bin/certificate-manager), but I could not login via SSO (seems that SSO service could also not be started).
Then, I had a look in the log files, and noticed a problem with vmware-vpxd:
VC SSL certificate does not exist, it will be generated by vpxd
This did not help either. I tried to manually start the service, with the same result.
How can I fix my vCenter?

I was able to start vmware-vxpd from the CLI but still no luck
emon:                                                                                                                                               unused
Checking for service rpcbind                                                                                                                                                       running
                                                                                                                                                                                   unknown
Checking for service sendmail:                                                                                                                                                     unused
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A                                                                                                                                         running
/usr/sbin/FOO not installed
/bin/snmpd is not running
                                                                                                                                                                                   unknown
                                                                                                                                                                                   unknown
Checking for service sshd                                                                                                                                                          running
Checking for stunnel (SSL tunnel):                                                                                                                                                 unused
Checking for service syslog:                                                                                                                                                       running
Checking for service uuidd                                                                                                                                                         unused
running (standalone: 5311)
running (standalone: 5367)
Warning: vmci status: unimplemented
running (standalone: 5417)
VMware CIS License Service is running: PID:10693, Wrapper:STARTED, Java:STARTED
VMware Component Manager is running: PID:10134, Wrapper:STARTED, Java:STARTED
VMware ESX Agent Manager is not running.
VMware Inventory Service is not running.
VMware Message Bus Config Service is not running.
VMware ESXi dump collector is not running
VMware Performance Charts Service is not running.
Checking for /usr/bin/rbd-watchdog-linux:                                                                                                                                          unused
VMware HTTP Reverse Proxy is running.
VMware Service Control Agent is running: PID:10937, Wrapper:STARTED, Java:STARTED
VMware vSphere Profile-Driven Storage Service is running: PID:18707, Wrapper:STARTED, Java:STARTED
ensure environment variables are set
Checking for VMware STS IDM Server ...                                                                                                                                             running
ensure environment variables are set
Checking for service vmware-stsd                                                                                                                                                   running
syslog is running, PID: 11999
VMware Common Logging Service is running: PID:11339, Wrapper:STARTED, Java:STARTED
vmtoolsd is running
VGAuth daemon .
vAPI Endpoint is running: PID:11563, Wrapper:STARTED, Java:STARTED
VMware Content Library Service is running: PID:19194, Wrapper:STARTED, Java:STARTED
Last login: Wed May 13 12:29:51 UTC 2015 on pts/0
pg_ctl: server is running (PID: 12178)
/opt/vmware/vpostgres/9.3/bin/postgres "-D" "/storage/db/vpostgres"
VMware vCenter workflow manager is not running.
vmware-vpxd is running
VMware vService Manager is running: PID:27602, Wrapper:STARTED, Java:STARTED
/usr/java/jre-vmware/bin/vmware-vws is running.
Warning: vsock status: unimplemented
VMware vSphere Web Client is running: PID:27919, Wrapper:STARTED, Java:STARTED
Checking for service xinetd:                                                                                                                                                       unused
Checking for ypbind:

Similar Messages

JWS Desktop shortcut fails to update after JNLP change in 1.6.0 update 18

Has anyone else noticed the desktop shortcut fail to update after a change to the JNLP with the latest Java 1.6.0 update 18 release?
Here are the steps we've found to replicate the issue on Windows XP, Vista, and Windows 7 using both IE and Firefox:
1) Download a JWS application and allow the desktop link to be created
2) Inspect the desktop shortcut and notice the path to the JNLP cache entry
3) Modify the JNLP at the server
4) Run the application via the desktop link - at this point the application will download updates and execute without issues.
5) Close the application - upon close, JWS will remove the old JNLP cache entry if the JNLP contained the security/all-permissions directive
6) Inspect the desktop shortcut again - notice that the path to the JNLP cache entry will remain unchanged
7) Launch the application again using the desktop link - JWS will fail with a cache exception if the JNLP contained the security/all-permissions element or will just run from the old JNLP
I've submitted a bug but just wanted to confirm that others are encountering the same issue.
Thanks,
Troy

Thanks for confirming.
This issue seems to continually creep into the Java releases. In the 1.6.0 releases, the issue is resolved in update 7 through update 11. Update 12, 13, and 14 all had various JNLP issues but I did find this specific issue with update 14. It was fixed again in update 15 and remained fixed through update 17.
I submitted two bugs and provided a simple sample application on our production site to use for testing with a url to update the last modified time. If bug is accepted, I'll post it here for others to vote for a fix.

My iphone 4 keeps restarting after i changed the battery

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

Iphone 4s fails to restart after installing ios 5.1 & then restoring from backup ?

I have restored My Iphone 4s to Os 5.1 Yesterday ... every thing went fine ..... at the time of restoring it from my previous backup ........ iphone fails to restart ..... it is in continous loop of apple logo and busy icon thereafter .. can anybody help ????

In that case, if everything else has failed, you can restore your iPhone by putting it in to DFU mode.
Follow the steps precisely.
1) Connect your phone to computer. Open iTunes (if it doesn't open automatically).
2) Turn your phone off. Turn off the device by holding down the sleep/power button in the top right corner and Home button at the same time. A red slider will appear. Slide it to the right to turn off the device. Alternatively, keep holding both buttons even after the slider appears and the device will turn off. Let go of the buttons when the device powers down.
3) Put iPhone into DFU mode. Hold down both the top (sleep/wake) and home buttons for exactly 10 seconds, then release the top (sleep/wake) button but keep holding the home button until iTunes displays a message stating that a phone in recovery mode has been discovered. Let go of the Home button.
4) Device screen is Black. If your device's screen is black, you are in DFU Mode. It may appear that the device is turned off, but it's not. If your phone displays anything, you are not in DFU mode.
5) Restore. Press the restore button and allow the phone to complete the restoration data. After it is done, select setup as a new phone. (Preferable)
Restore your backup (optional). Next, you can restore the phone again in the normal fashion (not DFU mode) using the most recent backup rather than setting up as a new phone. However, this may cause the original problem to return in some cases. If the problem returns, follow steps 1-5 again and setup as new. Do not restore from your backup afterwards.

Macbook pro failing to restart after new update

After trying to install the new update my MacBook pro fails to restart, its stuck on the Apple logo and then the screen goes black, it wont load in safe mode either. Apple support on the phone tells me that its a coincidence and that the display is shot?

On the bottom of your MBPis the serial number. Enter it here and post back the model and year information:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Ciao.

Secondary ACS 5.1 fails to Deregister, after IP change on Primary

IP address of Primary had to be changed, to respond to a hardware failure of TACACS server with IP in many device configs.
Now the Secondary fails to respond to repeated "Deregister from Primary" requests, even after reload -
   apparently because it cannot reach the Primary at its old IP address.
Requesting Deregister in GUI generates pop-up that says, "This operation will deregister this ACS Instance from the Primary Instance.
     Management applications on this ACS instance will be restarted and you will be required to login again. After performing this operation
     please wait five minutes for this restart to complete.
     Do you wish to contine?"      [ OK ]
But, checking back after 10 minutes -- or even the next day -- finds the Secondary's status unchanged.
Also tried Local Mode, Deregister from Primary; this also fails.
Does anyone have HOWTO URL on a total rebuild of ACS application?
Both ACS are CACS-1121-K9   running 5.1.0.44.4.
Thanks in advance for any help...
*** UPDATE: ***
Recommended command, "application reset-config acs",    was _exactly_ what was needed.
jrabinow -   many thanks!    :-)
    also, thank you for mentioning that the license would be required, so that I could locate it in advance and have it ready.
      Since there were no local certs on the server, we did not need to re-install those.

Since this is a secondary it should not have too much in terms of specific configuration
Therefore one possibility is to reset the configuration so it once again becomes just a standalone node and then regsiter back to the deployment as is done for any new node and as you previosuly registered it
reset configuration can be done using the following command at the CLI:
application reset-config acs
Note that after you reset the configuration you will need to reinstall the license so make sure you have this to hand
Also if you has installed a server certificate for the secondary server you would need that too

ALSA - Applications restart after output change

Hello!
I am trying to understand an issue I'm having with audio which I find quite annoying and would like, if possible, to implement a fix for this. However, I need help understanding.
The problem I see is that whenever I plug in my USB head set or unplug it, although my udev rules to change the output source work fine, I am forced to restart the application. Take for example Chrome, if I had my headset connected when I opened it and disconnect after to reproduce a video on YouTube, it won't play on the speakers unless I close Chromium and re open it.
Any clues on what could the problem be?

Have you tried to let pulseaudio control alsa ?
pulseaudio-alsa package

Windows failed to restart after auto update

Hi I have a dual boot machine with Windows 8.1 & Windows XP. The Windows 8.1 OS was itself an upgrade of Windows 8.0 . Everything was working well till last week.
Last weekend 14th Feb, Windows 8.1 wanted to install some updates while shutting down. It installed about 14 updates and shut down promising to restart soon. After restarting, Windows 8.1 never booted. I waited for around 20 minutes and them manually restarted
the machine. This time I selected Windows XP. Windows XP started, but in the process fixed something on the file structure by running chkdisk, while starting.
Later a friend told me that he'd similar issues of his computer not starting after the patch for a long time. But ultimately it did after about half an hour. I tried to boot Windows 8.1 again, leaving it no for an hour. But it was a vain effort.
I tried to repair my machine by booting with the Windows 8.0 setup disk. But this also failed saying some partitions are locked.
Can you please tell me what are the options available to me to revive my machine.

Here is the forum for you.
-- pa

AEBS fails to restart after having been configured

I want to use Airtunes and have successfully done for months. But my AEBS is now becoming highly erratic.
After hard reset, my AEBS can been seen by my MacBook. I can set it up fine using Airport Utility, apparently. Set it up by 'Joining another network', giving it a name etc, confirming the wish to play iTunes through it, etc. All goes fine. Once the set up is done, Airport Utility says something like 'AEBS set up is now complete. You can now close Airport Utility while the base stations restarts'; but the base station does not restart - "unknown error".
Having been able to see the base station, it suddenly then 'disappears' - neither Airport Utility nor iTunes can see it.
I have been through this loop so many times, each time hopeful because the computer can clearly see the base station, read its setting and apparently reconfigure them, but at the last step it fails.
Any ideas? Time for a new Base Station?
Tim

Same problem here. Was quite surprised that this has slipped through apple for so long.
Just picked up a macbook pro 17, had to do two things to make this work with 10.6.6...
1) Click on keychain_access -> System (keychain) -> IPSec Shared Secret
Click on "Access Control" tab button
select radio button: Allow all applications to access this item
2) sudo launchctl stop com.apple.racoon
sudo launchctl start com.apple.racoon
Reconnecting then worked.
IMPORTANT: I noticed that it is still flaky making connections.
It seems that doing a stop/start on racoon fixes the problem.
(I'm not convinced on the causality with this; would prefer apple folks to offer up a real solution.)
Yes.. I don't like the "allow all apps access" solution either.
Fwiw, I tried the "allow all apps access" first, which cleared out the blessed apps list. Ugh.
I suppose removing/adding the vpn again would get the list back, then configd (?) could be added.
jeff

My IPAD2 is failing to restart after 10 seconds

What happened : after full recharge following a full discharge, IPAD cannot restart, reboots after 10 seconds on and on and on
I have rebooted it once using advice taken here, and was able to restore on itumes , but then got worse with reboot after 10 seconds
I had noticed this a few days before where after full discharge, it had needed long time before stabilizing, with reboot period
I s it because of battery or because of OS?
I am desperate, one month since I bought it!
Thnks for help

If you have restored it - as a brand new device - and the problem continues - take to an Apple Store and let them look at it. Or call Apple. You get 90 days of free phone support as well and you are well within that time frame.
Let them sort it out for you.
http://www.apple.com/support/ipad/contact/

N96 fails to restart after software update

Hello,
If just hat my N96 software updated and now he resist to restart, he doesn't give any signal at all just "Phone start-up failed.Contact the retailer". What's wrong with it? My N96 has never worked properly, my N95 was better but also not that good as I asspected.

Hi troy1011
It might be worth looking at Paragraph 45 in FAQ for Nokia Software Updater here for using "Three finger reset" although it may be worth leaving battery out for 10 minutes first:http://europe.nokia.com/A4577229#faq45
Failing that it's a trip to a Nokia Care Point unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Appserver fails to restart after deploying ejb_basic_beanManaged example

I believe that I have faithfully followed the instructions in
file:///C|/weblogic/doc/examples/ejb/basic/beanManaged/index.html
describing how to build and run the example.
After editing the properties file and the appserver fails to start with
the following error:
Tue Jul 11 16:19:29 CDT 2000:<E> <EJB> Could not deploy:
'C:/weblogic/myserver/ejb_basic_beanManaged.jar': file is not a valid
jar file, or does not
contain a valid bean
weblogic.ejb.common.DeploymentException: DeploymentException opening JAR
file C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception
is:
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found]
weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boo
t.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:42)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:50)
at weblogic.ejb.internal.EJBJarLoader.<init>(EJBJarLoader.java:83)
at
weblogic.ejb.internal.EJBJarDeployment.setupJar(EJBJarDeployment.java,
Compiled Code)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:211)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:182)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:164)
at
weblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
at
weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:122)
at weblogic.ejb.internal.EJBJarDeployment
.<init>(EJBJarDeployment.java:112)
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:305)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
--------------- nested within: ------------------
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not foun
d]
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:313)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
Tue Jul 11 16:19:30 CDT 2000:<I> <EJB> 0 EJB jar files loaded,
containing 0 EJBs
Tue Jul 11 16:19:30 CDT 2000:<I> <EJB> 0 deployed, 0 failed to deploy.
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1392)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:516)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
I'm not seeing anything in the traceback that would suggest what I
screwed up. Suggestions?

Please post this to the .ejb newsgroups.
mbg
In article <[email protected]>,
[email protected] says...
I believe that I have faithfully followed the instructions in
file:///C|/weblogic/doc/examples/ejb/basic/beanManaged/index.html
describing how to build and run the example.
After editing the properties file and the appserver fails to start with
the following error:
Tue Jul 11 16:19:29 CDT 2000:<E> <EJB> Could not deploy:
'C:/weblogic/myserver/ejb_basic_beanManaged.jar': file is not a valid
jar file, or does not
contain a valid bean
weblogic.ejb.common.DeploymentException: DeploymentException opening JAR
file C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception
is:
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found]
weblogic.ejb.common.DeploymentException: Problem creating deployment
C:/weblogic/myserver/ejb_basic_beanManaged.jar from
C:\weblogic\myserver\ejb_basic_beanManaged.jar; nested exception is:
java.lang.NoSuchMethodError: weblogic.boo
t.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:42)
at weblogic.utils.jars.JarLoader.<init>(JarLoader.java:50)
at weblogic.ejb.internal.EJBJarLoader.<init>(EJBJarLoader.java:83)
at
weblogic.ejb.internal.EJBJarDeployment.setupJar(EJBJarDeployment.java,
Compiled Code)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:211)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:182)
at
weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:164)
at
weblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
at
weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:122)
at weblogic.ejb.internal.EJBJarDeployment--
==================================================
NewsGroup Rant
==================================================
Rant 1.
The less info you provide about your problem means
the less we can help you. Try to look at the
problem from an external perspective and provide
all the data necessary to put your problem in
perspective.

Dabase fail over problem after we change Concurrency Strategy:

Hi We had Concurrency Strategy:excusive . Now we change that to Database for performace
reasons. Since we change that now when we do oracle database fail over weblogic
6.1 does not detect database fail over and it need to be rebooted.
how we can resolve this ??

Hi,
It is just faining one of the application servers, developer wrote that when installing CI, Local hostname is written in Database and SDM. We will have to do a Homogeneous system copy to change the name.
The problem is that I used Virtual SAP group name in CI and DI application servers, in SCS and ASCS we used Virtual hostnames and it is OK according to SAP developer.
The Start and instance profiles were checked and everything was fine, just the dispatcher from CI is having problems when comming from Node B to Node A.
Regards

Mac Mini fails to restart after 10.4.5 update!

Hi,
Updated my Mac Mini to 10.4.5 this morning and restarted... now I'm getting the grey "panic" screen telling me I need to restart my computer. This can either happen virtually instantly or, as on a couple of occasions, when the OS X startup screen appears. Haven't tried anything else yet, but has anyone got any ideas before I start re-installing etc.?
Thanks in advance,
JF
Mac Mini 1.42 GHz Superdrive OS X 10.4.5 - nearly

OK... a bit further into the problem... booted to the DVD, the disk did need both a Repair and Permissions Repair.
At this point I re-verified everything, half way through the permissions verification, the same thing happened - now this is starting to point to a hardware issue.
So far I've had more luck, getting right into a full re-boot before the same thing happens.
At the moment I've started creating a disk image to an external firewire drive to make sure I can save everything, but I'm not even sure it'll finish that!!!
No problems whatsoever before the 10.4.5 update.
Any further ideas??
Is it possible that there's been a Bluetooth firmware update that may have snarled things up?
Thanks
JF

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
Have you thought about turning auto syncing off?
Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

VCenter 6 fails to restart after IP change

Similar Messages

Maybe you are looking for