Vcenter fails to sign in after update to 5.5 due to adding 3rd esxi 5.5 host

Added new 5.5esxi host, and attemted to add 5.5 host using 5.1 vcenter. Asked for license or evaluation then dropped host.
Vcenter will not authenticate with two 5.1 esxi hosts after 5.5 upgrade. I then updated 5.1 vcenter to 5.5 then tried to sign in, and vcenter failed however when I sign in one host in vsphere client the dialog box states that my vcenter at xx.xx.xx address is in use.
Unable to login, to vcenter. Since the hosts are live production  servers, am unsure of the next step since I don't want to disconnect
The users "live production" from inventory.
I've updated to 5.5 due to a third esxi 5.5 installed over weekend.
There is no domain used and the domain controller is off.
Please offer assistance

hello David thank you for replying, I have to hosts that are running in production and they were previously connected to vCenter via 5. 1. the third host is not currently up and running yet and it is on soon to be vcenter 5.5. . The vCenter still loads as 5.5, and  I can sign into the first host and the second host independent of the vSphere sign on via its ip address. . when I sign into the other hosts the to host involved with a dialog box stating vcenter in use.  . Since it is a busy weekend for my client due to Memorial Day weekend.  cannot afford to have an error with respect to disconnection of the host from the center when I sign on to vCenter via the web client I get a error message that it cannot connect to port 443 even though the vCenter client is connected to 9443. if you're stating that I should remove the host from the client "will I lose any existing inventory that is currently residing on the host on the production machines.  please note, the domain controller, and ad seever are off currently due to client working in workgroups. Soon to move them on a domain..
. I have created another 2008 r2 server with I'm going to install the simple sign on installation of the center on that server and I'd like to ideally connect to you 5. 5 vCenter to the host number 1 and number 2. please advise on the appropriate procedure to allow me keep vms up and running
And restablish the connection to vcenter.
I a, unable to sign in vcenter web client without 443 error even though im using port 9443
I have not set up the web client side and I would like to not disrupt the production server over the weekend.
thank you for the help I appreciate it take care

Similar Messages

  • Sony A7 failed to turn on after updating firmware 2.00

    As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

    I bought the Sony A7II a few days ago.  It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer.  Neither one would get the charge light to illuminate.  Not feeling the love Sony.  I just purchased a Flash, wrist belt, filters, etc...  I'm definitely not happy.  It seems this is a problem!

  • Lync 2010 Polycom CX600 phones fail to sign-in after firmware update

    We're running the latest version of Lync2010 in our environment of approximately 1,500 Polycom CX600 phones across 5 Standard edition sites. After rolling out the latest firmware update 4.0.7577.4444 this weekend about 10% of the phones do not come back
    online as the user they were previously signed as.The firmware was approved on a Friday evening and Monday morning we were still experiencing the issue.
    The phone is stuck in the following error message:
    "Sign-in Error
    Cannot sign in. Please verify your sign-in address domain\username, and password and try again."
    The phone did update to the latest version of firmware but is stuck in "limbo". Doing a traffic dump on the port it's connected to did not reveal anything as the phone is not attempting to communicate with any servers. Only a power
    cycle (unplugging POE LAN port) makes the phone sign back in. Just to clarify, after the power cycle the phone signs back in on its own as it seems that it still stored the user's sign in information.
    We connect to the voice network via LLDP and we have Alcatel-Lucent 6250 switches that these phones connect to. We also have the DHCP options for the phones to find our voice network for areas that do not have LLDP capable switches.
    Just to recap, about 150 phones experienced this issue across all sites and we cannot narrow it down to anything specific about the environment. Performing a power cycle fixes this issue but it is extremely annoying.
    Any suggestions?

    Check the similar thread at
    http://social.technet.microsoft.com/Forums/en-US/771ab6d9-908f-4545-b94f-ef51ab0cca60/polycom-cx600-cant-sign-in-after-firmware-upgrade?forum=lyncvoice
    Try to move back to the previous version or you may need to reset each phone manually.
    Lisa Zheng
    TechNet Community Support

  • IBooks 3 fails to launch even after update

    On my ipad 2, iBooks version 3 still fails to launch after update. This is the first time I can recall Apple failing to fix a material bug. I hope it is working on the problem.

    iBooks is working fine on my iPad 2.
    Lets try first quitting the iBooks app then resetting the iPad.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
    Then reboot your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Skype in not signing in after update

    I updated new version skype. After update it was not signing in each time it was showing please check your details.why what happen to skype please solve my problem

    Indeed you first should make sure that you are running the latest Skype version from the Google Play Store. Some devices come with an outdated Skype application pre-installed which needs updating first.
    Should the problem persists try first if your Skype login works on the Skype web account page at www.skype.com/go/myaccount
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Problem signing in after updating Skype

    I have just updated Skype to its new version, entered my username and password as asked, and the signing in goes on forever. The same thing happened the last time I updated. Any suggestion? 

    Silver57 wrote:
    Today, I performed an update to Skype because I was prompted to. Now after the update is complete, I cannot long in!! Got on the Skype site and downloaded the version again and the same thing has happened. WTF!!!
    What happens when you are trying to login? Any error message?
    What Firewall and Antivirus applications are installed on your computer?

  • Signing in after update

    After every update in the past year, skype cannot sign me back in. I then need to turn off the computer and turn it back on. After which skype logs in as usual. Is there a fix?

    Lostsenderiste wrote:
    I have just updated skype to version 7.7.0.103 and skype no longer signs in but hangs with the signing in tail-chaser going indefinitely. Tried closing and reopening but comes up with the signing in tail-chaser running. The computer is a Sony VAIO running Windows 7 Professional and Norton Security. I have had no problems with Skype before with this set up. What is my best course of action?Hi Lostsenderiste,  Sorry for the trouble. May I know the name/version of Norton Security you have? Also, May I know if you have tried to disable Norton Firewall and check if Skype works? Let me know I could help you with that. Thanks! DineshNorton Support

  • Thunderbolt dock fails to initialize video after update

    Yosemite continues to be the buggiest OS X upgrade I've used in quite some time, if not ever.
    After this most recent update my 2560x1440 display does not come up when I get to the office and plug in my 2012 Macbook Pro Retina and Belkin's original Thunderbolt dock. I tried it with a newer dock (Elgato's Thunderbolt 2 dock) and experienced the same issue. Anytime I disconnect and reconnect I have to power cycle the entire dock to get my video back. I am using a mini displayport to display port cable plugged into the dock's free thunderbolt port.
    Anyone else experiencing the same issue?

    You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
    CleanMyMac - Uninstall
    CleanMyMac2 Un-install
    After un-installing, run this program to make sure you got all the pieces.
    EasyFind – Spotlight Replacement

  • ITunes will not let me sign-in after updating

    device: Mac Mini Intel core 2 duo
    operating system installed:  Mac OS X v10.6.8
    version of iTunes installed on my computer is:  iTunes 10.4
    Details:
    After I upgraded to latest Itunes, the sign-in function is grayed out after I enter my apple ID. not selectable.
    Therefore I haven't been able to sign-in to iTunes, anybody have an idea of how to fix this?
    thanks ahead of time

    Relax.  The world is not ending.
    Go here and "Manage your Apple ID."

  • MacBook Air will not let me sign in after update

    I just got a new MacBook Air and I did the most recent update this morning. The computer restarted and it takes my password but then it just goes back to the sign in screen. Help

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Encoding fails with RGB Curves after update.

    I'm trying to finish a project, but Premiere is gving me troubles..
    I'm uisng Creative Cloud and I saw that there was a update for Premiere and i thought: "Why not, it can't hurt..", but boy was I wrong!
    Before the update I could play and export my sequence without any problems (except laggy Playback), but after the update Premier wouldn't play the sequences (only audio) and when I tried to render previews I got an generic error.
    After some investigation I found that there could be a problem with RGB Curves, and sure enough, after disabling the RGB Curve-effects on the Clips it worked fine!
    I also found that it should work fine with GPU acceleration enabled, so I activated it. Now my project played fine in PP (with RGB Curves), and thanks to the GPU it didn't laily
    Happily I started the export and went for a walk, but when I got back the exports had stopped and there was an generic error!
    So, apparentely the exporter(/media encoder) doesn't use the GPU (*sadface*) and so is affected by this weird bug.
    What should I do now??
    I use RGB Curve for color correction and grading through the whole sequence, so I guess I need to find another effect that gives me the same result..
    Windows 8 64bit

    I generally try to be careful with updates, and I should have known better (especially than update in the middle of a project). But given it was a minor update and that minor updates is supposed to fix bugs (and not introduce new features/bugs..) I thought it would be safe.. But it's a weird bug (that couldn't have been fixed by replacing the RGB Curve effect file with an older version!?) and even weirder is that the text I read was for CS5.5..
    Luckily I had also installed PP on my laptop, so I just copied the program files from the laptop to my workstation and I could carry on and finnish the project.
    The thing about waiting with updates of this kind is that you don't get the bug fixes. It's one thing to wait before you jump on the next big update (like CS5.5 to CS6 etc) and another to install "bug fix updates".
    There is no real "infancy period" for minor updates, they do not mature, there is one update, if that update introduces a bug, then that's fixed by the next update etc etc.
    In the end, you don't gain that much by waiting to do minor updates (albeit you should avoid it during a project), since minor updates should fix the bugs that your software currently has and you could, theoritically, just end up with more problems when you do decide to do that update.
    One solution could be to never update, but then you're stuck with the original bugs..
    The best thing to do is to do a backup before updating (and I should've done that..).
    What would've happened if I decided to install Premiere Pro a week later?? Then I probably would've gotten the latest version with the update and so the bug!?

  • Apple ID keeps timing out while trying to sign in after updating to iOS5

    I updated my iPhone 4 to iOS5 and now while trying to sign in using my apple ID (on the phone) I keep getting an error message saying "Could Not Sign In : The request timed out."

    Same thing is happening here, I can't get past the startup wizard, I had to skip the step - I don't know whether that will screw up my setup or not.

  • Cannot sign in after updating Skype

    Today, I performed an update to Skype because I was prompted to. Now after the update is complete, I cannot long in!! Got on the Skype site and downloaded the version again and the same thing has happened. WTF!!!

    Silver57 wrote:
    Today, I performed an update to Skype because I was prompted to. Now after the update is complete, I cannot long in!! Got on the Skype site and downloaded the version again and the same thing has happened. WTF!!!
    What happens when you are trying to login? Any error message?
    What Firewall and Antivirus applications are installed on your computer?

  • Can't sign in after updating phone

    I'm trying to update my iPhone 4 to the iOS 6. When I get through signing into the Apple ID phase, my ID and password work, I agree to the terms and conditions, but I keep getting a message that says, "Could Not Sign In. This person is not active." Please help!!

    Yes, my telco is an approved carrier. If my phone was brand new, I think so, they opened it in front of me.. I really couldn't remember it was 1.4 years ago. It did seem new.
    Well it says, "_____" cannot be used to unlock this iphone. I've tried both my apple ids but it didn't work.

  • MBP Fails to Start Up after Update

    I recently applied an update to the iLife '11 Suite through the Mac App Store.  (iPhoto, iMovie, and Garageband) When I restarted the computer after the update, instead of starting up normally, there is now a progress bar that appears for a few seconds below the Apple logo on the white screen after the chime. After the progress bar disappears, there is just a spinning circle and the Apple logo on a white screen. Why is my computer not starting up properly after this update? Thanks.

    As to cost - it all depends on whether you want to do-it-yourself or have Apple do it or an AASP tackle it. It's very easy to replace yourself - there on hundreds of YouTube videos on how to replace hard drives. To get an idea of the cost, look at the internal drives at Crucial and OWC - you'll also need a Phillips #00 and Torx T6 screwdrivers. There are even videos on OWC that take you through the relatively easy step-by-step procedure.
    I would just stay away from Western Digital drives: personally, I like Seagate, as they've given me no problems over the decades.
    Good luck, call back if you need any more information...
    Clinton

Maybe you are looking for