VCenter Operations Manager vApp Update 5.8.3 to 6.0.1

Hello - What is best way to update to operations manager VApp from 5.8.3 to 6.0.1 inplace ? Can we update inplace with using .pak files ?
Thanks

You will need deploy the vROps and import data from previous version (vCOps), take a look: How to migrate VMware Operations Manager 5.8.x to vRealize Operations Manager 6.0? | Settlersoman - A settler in the SDD…

Similar Messages

Operations Manager not updating IP phone location changes

We have Cisco Unified Operations Manager and we noticed that for some time IP Phone location changes were not registered and updated.
There are couple of phones in All IP Phones/Lines list which are listed as still connected to old switches, while actually moved to completely new switch on different location .
Also - in Devices>Device Management>Inventory Collection>IP Phone IP Phone Collection Status is always : "Discovery in progress..." with Last Collection Start Time and Last Collection End Time from couple of months ago...
We have discovered two old bugs CSCsw26833 and CSCsv33965, but Restart PIFServer, pdterm PIFServer followed by pdexec SRSTServer and checking of netstat connection did not change anything...
What could be a problem, how can we start IP Phone collection?

Hey George, thanks for the reply!
Yes, you are absolutely correct. If I set Device Mobility Mode from Default to Off, the phone re-registers and the correct time for that time zone is displayed...!
Awesome, thanks again George. Much appreciated!
Thanks Again,
Matt

[Blog] Monitoring WebLogic J2EE on VMware with VMware vCenter Operations (vCOps)

Monitoring WebLogic J2EE on VMware with VMware vCenter Operations
The Blue Medora vC Ops Management Pack for Oracle OEM was updated in early May (2014) to include enhanced support for Oracle WebLogic J2EE integration. All of the Oracle EM target types for WebLogic related components including WebLogic Server, J2EE Application Deployments, Oracle HTTP Server, as well as WebLogic Cluster are now available to be ingested into VMware vC Ops Enterprise Edition.
With the data available within these new vC Ops 'Resource Kinds', you have the ability to create WebLogic on VMware relationship views, WebLogic on VMware mashup dashboards, as well as leverage vC Ops anomaly detection and predictive analytics on your WebLogic J2EE landscape. Below are a number of example dashboards that were easily created using the WebLogic data available within the Management Pack.
The first dashboard, the WebLogic on VMware Relationship View -- helps you visualize your WebLogic environment running on VMware all the way down to the VMware VM, ESX, and even Datastore level. This can useful for diagnosing critical J2EE applications running within the vSphere environment -- allowing you to quickly discern whether a problem exists in the Oracle WebLogic layer or one of the VMware virtualization layers.
vC Ops Management Pack for Oracle EM - WebLogic on VMware Relationship View
Continued here: Monitoring WebLogic J2EE on VMware with VMware vCenter Operations | Blue Medora

Can you point me to recommendations on installing Hyperic on VMware virtual appliances?
Is it as simple as treating the appliance as a Linux VM during installation? Can vSphere be used to deploy Hyperic to a VMware appliance like vRA (non-IAAS)?
Thanks,
-MattG

Please help: After removed a connector (nagios-connector) there is an error at the operations Manager Console

Hello,
after installing the nagios connecor and it doesn'work, i try to remove it; with the powershell command remove-SCOMConnector. After removing it, Get-SCOMConnector shows me, that it doesn't exist:
PS D:\> Get-SCOMConnector
Name : Network Monitoring Internal Connector
DisplayName : Connector for populating network devices.
Description :
Initialized : False
Name :
DisplayName :
Description :
Initialized : True
Name : SMASH Discovery Internal Connector
DisplayName : Connector for populating SMASH devices.
Description :
Initialized : False
Name : Operations Manager Internal Connector
DisplayName : A connector used by Operations Manager components to insert discovery data, please create your own connec
tor do not use this connector.
Description :
Initialized : False
But when i take a look to the connectors in Operations Manager Console, it hangs, after a while i have this error:
Date: 27.05.2014 10:04:43
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.EnterpriseManagement.ConnectorFramework.EnterpriseManagementConnector.Reconnect(EnterpriseManagementGroup managementGroup)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.GetUpdate(IndexTable indexTable, QueryUpdate`1 update, CacheCursor cursor, Range range, Int32 offset, Int32 groupLevel)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(IndexTable indexTable, QueryUpdate`1 update)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(CacheSession session, Boolean fullUpdate)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.FireUpdateEvent(CacheSession session, DateTime updateTime, Boolean dataChanged, Boolean fullUpdate, Boolean updatesOnly, IEnumerable queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.FireUpdateEvents(CacheSession session, Boolean dataChanged, Boolean fullUpdate, ICollection`1 queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.PostQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType, Boolean dataChanged, DateTime queryTime, ICollection`1 queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalSyncQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalQuery(CacheSession session, UpdateReason reason)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.TryDoQuery(UpdateReason reason, CacheSession session)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Can somebody help me fixing this error?
Strange.. the powerShell Command "get-SCOMConnector" works.. but the console hangs (on loading) when i want to show the connectors...
Kind regards
Wolfgang

Hi,
I agree, we may need to remove the connector from OpsDB. In addition, here is blog regarding to the similar issue, hope it helps:
Error: “Object reference not set to an Instance of an Object” System Center Operation Manager 2012 Connector.
http://blogs.technet.com/b/birojitn/archive/2012/07/07/error-object-reference-not-set-to-an-instance-of-an-object-system-center-operation-manager-2012-connector.aspx
Regards,
Yan Li
Regards, Yan Li

MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?

Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Operations Manager Installation Error - Return Value 3

Hello, I am having issues installing Operations Manager Reporting 2007 R2. The installation hangs with no status update a little more then midway through. I am receiving the following exception below. I am trying to install this on a named reporting instance.
013-12-16T16:00:00.0547063-08:00 Debug:
*** Trace Started ***
2013-12-16T16:00:00.0859563-08:00 Debug:
ConfigureOverridesForDWRules: Root Management Server is: CORP32-VS
2013-12-16T16:30:01.7422063-08:00 Error:
ConfigureOverridesForDWRules error: System.TimeoutException : The requested operation timed out.
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.WindowsInstaller.InvalidHandleException: The handle is invalid.
at Microsoft.WindowsInstaller.SessionProperties.set_Item(String name, String value)
at Microsoft.Reporting.Setup.ReportingManagedCAs.ConfigureOverridesForDWRules(Session session)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
at Microsoft.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint)
CustomAction _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (1C:FC) [16:30:01:804]: NOTE: custom action _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
Action ended 16:30:01: InstallFinalize. Return value 3.
MSI (s) (1C:80) [16:30:01:804]: User policy value 'DisableRollback' is 0
MSI (s) (1C:80) [16:30:01:804]: Machine policy value 'DisableRollback' is 0
MSI (s) (1C:80) [16:30:01:882]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1133543036,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (1C:80) [16:30:01:882]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (1C:80) [16:30:01:882]: Executing op: DialogInfo(Type=1,Argument=System Center Operations Manager 2007 R2 Reporting Server)
MSI (s) (1C:80) [16:30:01:882]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
Action 16:30:01: Rollback. Rolling back action:

Niki,
I verified the data warehouse SQL server authentication account is indeed blank. I just tried running the installation again and received the following errors in the SQL log.
12/18/2013 07:43:28,spid177,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is
added using sp_addmessage.
12/18/2013 07:43:28,spid177,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:28,spid88,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is added
using sp_addmessage.
12/18/2013 07:43:28,spid88,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:28,spid173,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is added
using sp_addmessage.
12/18/2013 07:43:28,spid173,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:18,spid173,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is added
using sp_addmessage.
12/18/2013 07:43:18,spid173,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:15,spid13s,Unknown,AppDomain 9702 (OperationsManager.dbo[ddl].9701) unloaded.
12/18/2013 07:43:14,spid21s,Unknown,AppDomain 9701 (OperationsManager.dbo[ddl].9700) unloaded.
Also, please see error in the MOMReporting log below:
2013-12-18T07:41:54.8239565-08:00 Debug: ConfigureOverridesForDWRules: Root Management Server is: COR32
2013-12-18T08:11:56.1874277-08:00 Error: ConfigureOverridesForDWRules error: System.TimeoutException : The requested operation timed out.
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.WindowsInstaller.InvalidHandleException: The handle is invalid.
   at Microsoft.WindowsInstaller.SessionProperties.set_Item(String name, String value)
   at Microsoft.Reporting.Setup.ReportingManagedCAs.ConfigureOverridesForDWRules(Session session)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
   at Microsoft.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint)
CustomAction _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:4C) [08:11:56:281]: NOTE: custom action _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
Action ended 8:11:56: InstallFinalize. Return value 3.
MSI (s) (38:6C) [08:11:56:359]: User policy value 'DisableRollback' is 0
MSI (s) (38:6C) [08:11:56:359]: Machine policy value 'DisableRollback' is 0
MSI (s) (38:6C) [08:11:56:624]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1133657144,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)

Upgrade System Center Operations Manager 2007 R2 CU6 -- 2012 RTM issues (Assembly related exception in log)

Hi guys
I am currently performing a distributed, complex upgrade with a customer:
4 management servers (1 being RMS), both databases (OM & DW) on a single SQL Server (2008 R2 SP2)
We moved over the RMS role to another server and decomissioned the old one due to it being a 2003 server.
Then we upgraded all non-RMS management servers.
We had some issues with them as well (same error in the log), but when we reinstalled the 2007 R2 binaries & patches and redid the upgrade it came through fine.
The RMS however keeps throwing the same error. Things I tried:
- Full clean of the server including momclean and msizap, then reinstall the RMS and retry the upgrade
- Reregister of the msiexec server
I am suspecting some issues with assemblies and / or GAC, but no clear proof on that, only that it crashes after performing assembly operations.
Below an extract from the RemoveMOMServer.log (the error occurs when uninstalling SCOM 2007 R2)
Can anyone help out or give me some pointers on possible causes?
Many thanks in advance!
MSI (s) (F4:CC) [15:43:55:259]: Executing op: UpdateEstimatedSize(EstimatedSize=0)
MSI (s) (F4:CC) [15:43:55:261]: Executing op: ProductCPDisplayInfoRegister()
MSI (s) (F4:CC) [15:43:55:263]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommit,,)
MSI (s) (F4:CC) [15:43:55:264]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommit,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (F4:CC) [15:43:55:266]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitUninstall,,)
MSI (s) (F4:CC) [15:43:55:266]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitUninstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,CustomActionData=C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe uninstall "Microsoft.EnterpriseManagement.OperationsManager,
Version=6.0.4900.00, Culture=neutral, PublicKeyToken=31BF3856AD364E35"€500€C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe uninstall "Microsoft.EnterpriseManagement.OperationsManager.Common, Version=6.0.4900.00, Culture=neutral, PublicKeyToken=31BF3856AD364E35"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe
uninstall "C:\Program Files\System Center Operations Manager 2007\Microsoft.EnterpriseManagement.UI.Foundation.dll"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe uninstall "C:\Program Files\System Center Operations Manager 2007\Microsoft.EnterpriseManagement.UI.ConsoleFramework.dll"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe
update /queue€500€C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe update /queue€500)
MSI (s) (F4:CC) [15:43:55:268]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitInstall,,)
MSI (s) (F4:CC) [15:43:55:268]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitInstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (F4:CC) [15:43:55:270]: Executing op: ActionStart(Name=PublishFeatures,Description=Publishing product features,Template=Feature: [1])
MSI (s) (F4:CC) [15:43:55:270]: Executing op: FeaturePublish(Feature=MOMServer,,Absent=3,Component=@+h863e0NAgaZ7OoE1)HM[lp(tNC_AUZ$SF(D`%aFTE9fFyfs=F=$JG3?U4%Jg+a[OgIJ9l,ltBUJ6}nEPr^ulwB]8CeSrDJOg^Dv6-5{b^j}@^?vz.j7,3M6C%7,*@eo93k8pr6&&N9$znhtI3,f=ds,sbkr{FsK5s,aat+W9Luq^c2T)%]NK-`Nh95Q?1j(Dg@M-ujVqmWklfnQ9{a+G7w.5xHY-FhkL+vZAB~5y'c@}'jr8WIsm`xe=5orHD{+mjmr3jr^W2UX?7PmxUa@v*Z]~U%@4u.j?-mBUeMsh74(}?767KRj@A72,VR{&Ndp=1kRf[ZQAWW2Vmir6O-EYNi`aVy0=sY*I`g=~^zgj-K41CWIAn3+(O4}ZvX8=hVDIvD^A&7iGA]RjL$JKo'QVT)b@Y@NcD-awAKEm,xN7,?,Ad7cW2b8}K?@`XVc]R`h8k*+PKa=CULr]CV`GY24=J**5wT+^.,Yw,vNCs'_A95dR?W8yIC[JXIm!nzq@5?Enk}PZewbi(r&t1H!94?5m0NzSd96@yq+0'^.?}G.RFEU^J@e`)a-_.e4@W?a@,yfmDTR]^+cbWf.=hV2Lk`!5yfUciqXO0JF?wIvuYFC{LBr*ENyKNMv9@3O~EdzJ!$jxy*dl]uq8{j_GLM1aC_g[-UdCQiC90o{ZS=lW(WUciqXme3eSKW@5fYZQ*R{[[yk0@XZAwJAUIK=yaPrb5j3zZII9*^7LD'L6,,V{p7-suLJ?`v(5R1a5&ko,1X$zkt~8Ic75fYZQ*RaE1v.2pOX8dqQ4PWI)'Vx5^d6cT~W@m1M]xA+z~*JWKX5swUG9JO-4h}&rH2H%obQfhOk?@2$kky4Qx]3yC3vPpLx@bP%U&2$(719F%lc[~}z8HzR.HDHZ)c]{SAz-boA9DSkLX$,eI5Tm1KmpVu+AzEhUp4Ka@(9k~3kSgQX@N@a@gaH@B-,TlvgYR`J9ET02Ay.r4F*v&OktBzm?8g^(@8)Udj
MSI (s) (F4:CC) [15:43:55:273]: Executing op: ActionStart(Name=PublishProduct,Description=Publishing product information,)
MSI (s) (F4:CC) [15:43:55:273]: Executing op: CleanupConfigData()
MSI (s) (F4:CC) [15:43:55:273]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=0,Remove=0)
MSI (s) (F4:CC) [15:43:55:276]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=1,Remove=0)
MSI (s) (F4:CC) [15:43:55:280]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=80035200)
MSI (s) (F4:CC) [15:43:55:280]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager,fileVersion="6.1.7221.99",version="6.0.4900.00",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",
AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:280]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:281]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:289]: Verifying accessibility of file: Microsoft.EnterpriseManagement.OperationsManager.dll
MSI (s) (F4:CC) [15:43:55:291]: Using source file security for destination.
MSI (s) (F4:CC) [15:43:55:304]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:304]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:305]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:306]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:306]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:307]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:308]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:308]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:310]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:310]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:310]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:312]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:59:483]: Internal Exception during install operation: 0xc00000fd at 0x0000000077C24EDC.
MSI (s) (F4:CC) [15:43:59:483]: WER report disabled for silent install.
MSI (s) (F4:CC) [15:43:59:483]: WER report disabled for non-console install.
MSI (s) (F4:CC) [15:43:59:483]: Internal MSI error. Installer terminated prematurely.

Thanks for you updating! For SQL related issue, please post on the following forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Regards,
Yan Li
Regards, Yan Li

Installation of Operations Manager 2012 R2 along with 2012

Hi,
I have an existing SCOM infra (Single SCOM server with version System Center Operations Manager 2012 (7.0.8560.0) )
Now I want to deploy SCOM 2012 R2 in 2 servers (Management server, operation console, web console ) on both the machines for high availability.
My question is - Is it possible to deploy the SCOM 2012 R2 in the existing infrastructure without installation SP1 or any cumulative update on the present server? Since I want to setup the SCOM 2012 R2 on 2 new machines, is it possible to go ahead without
in place upgrade or do I need to demote the existing SCOM 2012 and then freshly install SCOM 2012 R2?
Please suggest the best way to move from SCOM 2012 Single server to SCOM 2012 R2 on 2 new machines.
Thanks in Advance, Any quick help highly appreciated.
Best Regards
Krishnakumar B
Thanks & Regards Krishnakumar B

Hi,
If you want to upgrade Distributed Management Group, then each management server must be upgraded.
Please go through the below links for Distributed Deployment of Operations Manager:
http://technet.microsoft.com/en-us/library/hh298610.aspx
The below link is about how to Upgrade Distributed Management Group to Operations Manager 2012 SP1:
http://dynamicdatacenter.wordpress.com/2013/01/09/upgrade-distributed-management-group-to-operations-manager-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

Management pack version difference in System Center - Operations Manager 2012 R2 - Help us.

Hi,
I have SC Operation manager 2012 r2 in my environment. It has managed with multiple management servers.
I have import some unsealed MPs through Ops SDK code and by manually using Operation manager console.
Here with i tried to install higher version of MPs and upgrade its version from 1.1.0.0 to 6.0.0.0.
case 1:
After successful installation of some MPs and check Operation manager console, it showing newly upgraded version(6.0.0.0).
Then i have import that MP and checked its version inside it showing 1.1.0.0(older version).
Here the imported MP has 1.1.0.0 version and console showing its version as 6.0.0.0.
Why it showing different versions in imported MP(inside xml) and Operations manager console view?
case 2:
After that i tried to import other MPs using console. But it showing below error;
Verification failed with 1 errors:
Error 1:
Found error in 2|Monitoring.ActiveDirectory_server|6.0.0.0|Monitoring.ActiveDirectory_server|| with message:
Could not load management pack [ID=Monitoring.Base, KeyToken=9e875220a3987e0b, Version=6.0.0.0]. The management pack was not found in the store.
: Version mismatch. The management pack ([Monitoring.Base, 9e875220a3987e0b, 1.1.0.0]) requested from the database was version 6.0.0.0 but the actual version available is 1.1.0.0.
Its happened in multiple management servers scenario. So Is any possibility to happen because of multiple management servers scenario?. There is no issues in this same MPs while i tried in single management server. These same MPs are imported and working
fine in single management server scenario.
Help me to solve these 2 issues!!
Thanks,
satheesh

1) At first, you should make sure that the imported MP has correct version. I will open the XML of the imported MP and check its current version e.g.
When you open the xml file of imported MP, the version number is shown as
<Manifest>
    <Identity>
        <ID>Microsoft.SystemCenter.Visualization.Component.Library.Resources</ID>
        <Version>1.0.0.2</Version>
    <Identity>
    <Name>Resources library</Name>
    <References>
        <Reference Alias="System">
        <ID>System.Library</ID>
        <Version>1.0.0.1</Version>
From the above sample, the imported MP version number is 1.0.0.2.
2) I am using operation console to import the management pack and check the version number in operations console whether it is updated to new version 1.0.0.2
3) Using operations console to export the MP which has imported in step 1) and open it to check what is the version number of MP. Make sure that the version is 1.0.0.2
4) If the above procedure provide a prefer match of version number, re-import all problematic MP.
5) At last, you may use the following SQL to check whether the correct version number of MP is stored in DB successful
select version, friendlyname from managementpackview where friendlyname like 'Microsoft.SystemCenter.Visualizatio%'
Roger

After moving database, error on startup operations manager console

Hello,
may be someone can help me or give me a hint. I have moved the operational databas of SCOM 2012 to an other MSSQL-Server; from a SQL2008 Server to a SQL2012 Server.
I used this document:
http://technet.microsoft.com/en-us/library/hh278848.aspx
After restarting the services i open the operations manager console, but it fails:
Date: 28.08.2014 15:42:03
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'name.foo.fodomain.de'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://name.foo.fodomain.de:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0060373. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.177.9:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.177.9:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://name.foo.fodomain.de:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0060373. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.177.9:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.177.9:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.177.9:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
My databaseadmin told me, that all is ok, the operations management server queries the new sql server, then close the connection. So we started again the old database server, there are still queries to this server.
What i've done:
- Changing the database servers name in the registry, Microsoft Operations Manager, 3.0, Setup, DatabaseServerName
- changing the database entry at the file ConfigService.confg
After my databaseadmin told me, that there are queries at the old database server, i searched in the registry and found two entries:
- System Center
Common
  Database
   DatabaseServerName
- System Center Ooperations Manager
12
  Reporting
   DWDBInstance
.. i have still this error, no connection possible.
What testing i can do?
Kind regards
Wolfgang

You have to update the DB server names in the databases as well. Here are the instructions for SCOM07, I suspect it's similar in SCOM12
Update the OperationsManager database with the New Database Server Name, and ensure that the account that you are logged on with has sufficient privileges on the SQL Server instance.
Open SQL Server Management Studio.
Expand
Databases, OperationsManager, and Tables.
Right-click
dbo.MT_ManagementGroup, and then click Open Table if you are using SQL Server 2005 or click
Edit Top 200 Rows if you are using SQL Server 2008.
Change the value in the
SQLServerName_6B1D1BE8_EBB4_B425_08DC_2385C5930B04 column to reflect the name of the new SQL Server-based computer.
Save your change
Configure the Operations Manager database with the name of the new Data Warehouse server as follows:
On the server that hosts the Operations Manager database, open SQL Server
Management Studio and navigate to Databases, OperationsManager, and then to
Tables.
Right-click
dbo.MT_DataWarehouse, and then select Open Table if you are using SQL Server 2005 or select
Edit Top 200 Rows if you are using SQL Server 2008.
Change the value in the
MainDatabaseServerName_16781F33_F72D_033C_1DF4_65A2AFF32CA3 column to the name of the new Data Warehouse server.
Close SQL Server Management Studio to save your changes.
"Fear disturbs your concentration"

SCOM 2012 Operations Manager Failed to start a process

We have recently upgraded from SCOM 2007 to SCOM 2012. We are not getting a great deal of “Operations Manager Failed to start a process”. The process varies including:
DiscoverSQL2008ASDiscovery.vbs
DiscoverSQL2008DBEngineDiscovery.vbs
DiscoverSQL2008ASDiscovery.vbs
Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs
I have researched and researched. I know that you can try to run the scripts locally on the machine but it seems the scripts never make it to the machine. I go to the path in the error, no luck. I look in the other folders as I know that SCOM moves the scripts,
and I even search the entire C drive but the scripts are not getting to the server. The folder is not even making it. For example:
Command executed: "C:\Windows\system32\cscript.exe" /nologo "Microsoft.Windows.Server.NetwokAdapter.BandwidthUsed.ModuleType.vbs" SERVER true Working Directory: C:\Program Files\System Center Operations Manager\Agent\Health Service State\Monitoring
Host Temporary Files 11606\1759\
The script is not there and the folder \1759 is not there either.
I have removed and reinstalled the client.
Antivirus is fine, up to date and not blocking on any of the machines.
I have stopped the “System Center Management service” and renamed the “Health Service State” folder and it recreates fine but not long after I get the warning in SCOM about “Operations Manager Failed to start a process”.
I look in event viewer for Operations Manager on this particular one and I see a lot of:
Performance data from the Health Service could not be collected since required registry keys could not be read, the error was 2L (The system cannot find the file specified.). Event ID 6001.
I tried the fix of
"lodctr MOMConnectorCounters.ini" and "lodctr HealthServiceCounters.ini" but I get “error
encountered while updating text in registry. Status: 0”. Again I am using SCOM 2012.
Do I need to look at each failed script or is there a overall issue because the scripts are not making it to the machines. Any ideas?

I guess you might need to run "mofcomp sqlmgmproviderxpsp2up.mof".
Thanks, S K Agrawal

Operations Manager 2012 R2 UR3

When updating to UR3 the system wants to upgrade the agents. Does this require a reboot of the client servers? (http://support.microsoft.com/kb/2965445) Is this the last update applied to Operations
Manager 2012 R2? I have applied UR1 and UR2 to the system. Version is at 7.1.10226.0

am agreed with Alexey, I had install UR 3 two times in two different customer and have same old agent version, and there are no agent server restart required.
even I try to install agent in new server after UR3 give same agent version.
Regards, Ibrahim Hamdy

Event ID: 1418 Operations Manager SDK service threw an exception

Hi
Today we have received the below event in application event viewer. I have checked connector service working without any issues.
We are using SCOM R2 with CU2 and we are using universal connector
Event Type:   Error
Event Source:   OpsMgr Universal Connector
Event Category:   None
Event ID:   1418
Date:       6/14/2012
Time:       5:09:58 AM
User:       N/A
Computer:   INDRMS1
Description:
2012-06-14 05:09:58.283 [Microsoft.SystemCenter.Interop.Framework.Modules.OpsMgrModule] ERROR Error 1:\nFailure message: Request to update alert ignored due to invalid TimeModified\n0cc6a0f1-08cc-4a44-9c2f-7461c97c9fbd\nMicrosoft.EnterpriseManagement.Common.ConcurrentUpdateException:
Request to update alert ignored due to invalid TimeModified ---> Request to update alert ignored due to invalid TimeModified
   --- End of inner exception stack trace ---\n\n
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
Help us to understand/troubleshoot on this issue.
Donald D'souza (http://donald-scom.blogspot.com/)

Hi,
Please check if you have applied the following update:
Systems Center Operations Manager 2007 R2 Connectors Cumulative Update 2
http://support.microsoft.com/kb/2274165
If the issue persists, please also check the Event Log on the server and see if there are any related errors.
I also noticed you were using SCOM 2007 R2 Cu2, please try CU6:
OpsMgr 2007 R2 CU6 rollup hotfix ships – and my experience installing it
http://blogs.technet.com/b/kevinholman/archive/2012/05/18/opsmgr-2007-r2-cu6-rollup-hotfix-ships-and-my-experience-installing-it.aspx
Hope this helps.
Thanks.
Nicholas Li
TechNet Community Support

Operations Manager fails to communicate with DCR server

After a recent restart of the Operations Manager server we found it is no longer able to manage devices. When attempting to open a applet that depends on DCR connection I receive an error " Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and refresh the page." I have attached the DCR logs and pdshow from the server. Has anyone experienced this issue, and if so, how can I correct it. Any help would be appreciated.

I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
I have counted over 50 different server I manage with services such as domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
It is happening on metal, hyper-v and esx vmware servers.
It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
It is happening on servers with Intel and AMD chip-sets.
It is happening on machines that are a part of a domain or in a workgroup.
It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
Only a restart will fix it.
I have ran process monitor on several of the problem machines and I cannot find anything.
Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
Moses Hull of Alexant Systems

Can we deploy Antimalware Policy Operations Manager 2007 to Operations Manager 2012?

Can we deploy Antimalware Policy Operations Manager 2007 to Operations Manager 2012?

Hi,
Yes, you can check, you can update it to match the informaton here:
http://blogs.technet.com/b/manageabilityguys/archive/2013/11/26/system-center-2012-r2-operations-manager-anti-virus-exclusions.aspx
Reagrds,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

VCenter Operations Manager vApp Update 5.8.3 to 6.0.1

Similar Messages

Maybe you are looking for