VCleared Item also come under Open items list

Hi Exports
  In Vendor Account,after Clearing the transaction with F-43,When displays the balances in vendor account it is not shows as a cleared item but showing as open item with red mark but the account balance is  showing correct,only cleared item is not coming in green color what is the solution for this  ?
Edited by: G SUnil on Nov 17, 2011 5:57 PM

Sorry that is F-53
That Outgoing payment clearing F-53, And i saved that Document also but account balance is showing correct and cleared items is not coming is green Mark please give me suggestion to me ?
Edited by: G SUnil on Nov 18, 2011 6:20 AM

Similar Messages

  • Reset & reverse document with open item managed and none open item managed

    Dear forum,
    I would like to confirm the below.
    If i have a posted document where the double entry has open item managed account and none open item managed account and where the open item managed account is cleared, how can i reverse this document.
    The problem now is FBRA cannot reset and reverse (as the document partly has none open item managed account) and FB08 also cannot reverse (as part of the account is open item managed account and it is cleared).
    Besides manually reverse via FB01, any other method?
    Thanks
    Moderator: Please, avoid asking basic questions

    Which document are you trying to clear using FBRA?  You should reset the "clearing document" using FBRA; not the original document that has one open item and one non-open item.  Once you reset the clearing document using FBRA, you should then be able to reverse the original document (the one that has one open item and one non-open item) using FB08.

  • Cleared items still shows as open items in transaction FBL3N

    Dear All,
    We have an issue with respect to cleared items still shows as open items in transaction FBL3N.
    Few documents has been posted and cleared, but still those line items still shows as open items.  We had this problem only for few line items. 
    For other line items this clearing process is working properly without any issue.
    Issue:
    1. Documnet has been posted on 15.08.2209 and the same document has been cleared on 12.03.2010, but this document still shows as open item only....
    Looking forward your  response / suggestions to resolve this issue.
    Thanks in advance
    Regards,
    Prasad

    Hi Prasad,
    You have the following ways to find out the reason:-
    1. Check your selection criteria in FBL3N, if you are selecting open items as on 15.08.2009, then they will still show open items..
    2. Check in table BSIS and BSAS and check where the documents are appearing.If they are cleared, they all should be appearing in BSAS.
    This is standard SAP and most probably it has got to do with dates...
    Regards,
    SAPFICO

  • FBL3N - line item visible both as open item and as cleared item

    Hello,
    Please can you tell me possible reasons for which I see the same line item in FBL3N as an open item when I check "open items" and as cleared when I check for "cleared items".
    Thank you !
    Daniel N.

    There is a small correction:
    It is not partial it is residual.
    In case of partial your original document will be intact - Open items will show debit, credit and the balance.
    In case of residual, your original amount will be deducted and a new entry gets posted as if there is a new transaction. For example from 100 USD if 40 USD has been cleared, then two line items will be shown in 40 as cleared items and a new line 60 will be generated in open items 60. But, this 60 will have different document number.
    I think there is some issue the way in which selection criteria has been selected.
    Please do not see the open items at a key date. Because that date it might be open item, later at a stage it might have become a cleared item.
    Do not restrict any dates and see the total items (cleared items and open items) and let me know if the same document is showing as cleared as well as open. This is more unlikely and I have not seen.
    Regards,
    Ravi

  • GR amount/line item still showing in Open Item after run F.13

    Dear Exparts,
    We run the F.13 after MIGO and MIRO. The GR/IR line item should clear after run the F.13. But the scenario is that in FBL3N in GRIR G/L Balance, MIRO Line item showing clear but the GRN line item is still showing in Open item. How can it possible and what to do for it. As per my knowledge Both line item should clear after run f.13.
    And how can I get the credit amount in which respect the IR(MIRO) amount cleared.
    Thanks,
    Sourav

    Hello Sourav,
    In the Automatic clearing Program for the items to get cleared they
    should meet the fixed criterian and the user defined criteria (OB74).
    When we execute SAP124(F.13) with the flag "only documents which can
    be cleared" it will display in detailed list only those documents that
    can be cleared. If dont check this field it will generate a list even
    of documents that cannot be cleared.
    For example:
    in the OB74: ASSIGNMENT,FUND & BUSINESS AREA as the criteria.
    And the ASSIGNMENT is not matching and thus the system does not find
    the item suitable or rather eligible for clearing.
    The system groups items according to
    fixed system criteria:
    Company code
    Account type
    Account number
    Reconciliation account number
    Currency key
    BSID-WAERS for customers
    BSIK-WAERS for vendors
    BSIS-PSWSL for G/L accounts
    Special G/L indicator
    The program also groups items according to a maximum of five user
    criteria. Note that the trading partner number and the business area are
    no longer fixed system criteria (in comparison to the former clearing
    programs SAPF123 and SAPF123W). Therefore, if you want to group by
    business area or trading partner number, you have to enter these as user
    criteria.
    Thus initially items are grouped according to fixed criteria one of
    which is company code.
    I would like you to review note 10757 FAQ: MR11, clear GR/IR clearing
    account
    Please also review the documentation of the program SAPF124
    Please also review the help.sap.com documentation on GR/IR Account
    Maintenance.
    http://help.sap.com/saphelp_47x200/helpdata/en/30/1060387db94003e1000000
    9b38f8cf/frameset.htm
    hope this helps
    regards
    Ray
    Edited by: Raymond Moynihan on Oct 19, 2011 5:14 PM

  • How to clear customer open items by another  customer open item

    Hi Guru's
    I have a problem, we need to assign  and clear the open items of one customer with another customer from same company code. is it possible?
    for eg: I have a customer X whose Debit balance is USD1000 and Cusomer Y is having Credit balance is 1000. Customer Y is agreed to settle the amount to customer X.
    since customers are not related , we dont maintain any relationship in SAP. how do we post and clear the open items?
    please let me know the procedure.
    regs
    kumar

    Hi,
    When the moment you finish choose open item for 1st customer and then you have to press F7 (Charge off diff.) new screen comes then press F6 (Choose Open Items), then enter required data for 2nd customer (such as customer code, doc number, etc). You can post partially, and residually for this clearing posting.
    Good luck.
    -dwih-

  • FBL3N-cleared item visible in both open item and cleared item.

    Hi
    We have posted a line item to Bank clearing account-open item.
                            XXXX a/c
                                 To bank clearing account
    Then we posted another entry of reconciliation
                         Bank clearing account
                               To main bank
    The we went to f-03 and cleared the bank clearing account.
    However i could still see both the entries in open item in fbl3n and also in cleared items.How this be possible when the accounts are cleared i could see it in open item too.Please suggest.

    Hi,
    One more reason for this is that you have posted ur bank reconsilation entry in the future date.
    See by default SAP will always derives current date to your FBL3N selection screen in the open item key date field, so when you pass ur recon entry at a future date, system will show this line items as open items as on current date.
    check the open items by removing date in the key date field in FBL3N selection screen
    Where as cleared item selection there will not be any date derivation by the system, so system considers all the documents irrespective of their posting dates.
    Please ask for further issues.
    Thanks,
    Srinu.

  • Converting a GL account from Open Item Mgnt to Non-Open Item Mgnt

    Hi All,
    I have a GL account which needs to be switched from being an open item managed account to a non-open item managed account.  The account has already been posted to.  I have therefore posted a document to bring the balance of the account in local currency to zero and have also cleared the account so there are no open items showing (via transaction FBL3N).
    However, when I try to untick the 'open item management' box in the master record (via transaction FS00), I get an error message saying that the balance is zero but open items still exist.  I'm abit confused as the balance of the account is zero and there are no open items that I can see, even though the system is telling me there are!
    Am I missing any steps?  Could someone take me through exactly what I need to do to be able to untick the box and set the GL account correctly.
    I've already searched on the forum and found advice about changing the settings via OBA5, but when i look at that transaction there are no messages with class FH in there.
    Any help would be appreciated.
    Many thanks
    James

    Hello,
    In your case, though balance is ZERO, they are not cleared against each other. It is the reason you are still facing the problem.
    If ther is no open item management check box, then copy program RFSEPA02 to ZRFSEPA02 and append the initialization control.
    If there is already open item management but you want to remove then copy RFSEPA03 to ZRFSEPA03 and append the initialization control.
    Do the following steps:
    1. Block the account for postings (all check boxes) in FS00
    2. Run the customized Z program (Give the company code and account number)
    3. Unblock the account for postings (remove all check boxes) in FS00
    Take help from your ABAPer to stopping the initilization error check.
    Hope this solves your issue.
    Regards,
    Ravi

  • Migrate SAP AR open item to SAP AR Open Item

    What is the best method to migrate AR Open Items from one SAP system to another?
    cheers,
    RG

    Hi
    [Check this link|http://sap.ittoolbox.com/groups/technical-functional/sap-acct/how-do-you-migrate-ar-open-items-from-legacy-to-sap-2104255]
    Regards
    Pavan

  • Cleared item swowing as a Open item

    Hi All,
    I posted a document in f-02 for bank charges the entry was bank charges a/c debit and bank a/c is credit. and i posted the same data into ff67. and for reconsilation i upload the same data into FEBA for bank statement. now this document is cleared.
    but the problem is when i see this document in FBL3N this document numbe showing in Open items but i cleared allready.
    Please give me the solution for this.

    Hi....
    Those are items we cannot delete first we have to reverse those items using the FB08 for open items ..other wise use T.code FBRA for clearing items
    once done the all activites after that you have dleted the statment number number useing program Goto SE38 and execute the following report: RFEBKA96.
    On application put 0001. Here you will find all the statements. Mark the ones you want to delete... and press Delete Statements. This will permanently delete the load from your system.
    HINT: to search the statement you want to delete (Short Key), query it using table FEBKO.
    After delete the Bank Statement, the following steps can be solved. Please try:
    T.Code: FEBP
    The following parameters to be entered:
    Statement date: The same statement date
    Statement number: The same statement number
    Select u201CPost immed.u201D Select
    Execute
    Note:
    Please note that statement date is very important and same to be entered to process all the data for posting.
    Finally check the statement file debit and credit balance it must be Zero
    Than try to post once again ..it will allows you post
    I hope it will helps you
    Regards
    vamsi

  • Change GL Account from Open Item Managed into non-Open Item Managed

    In the former R3 environments, release 4.6 there was the program RFSEPA03 to turn off open item management.
    However, in ECC 6.0 this program is blocked and there seems to be no possibility to change a GL account back to non-open item mgt.
    Please comment,
    Kind Regards WR

    Yes .. I Agree with you ...
    Actually I accidently, did not check the GL first, but run the ZRFSEPA02 first .... because of that, my GL is check as an open item and as a recon account too ...
    any solutions ?

  • F-32 modify selected open items in the Process Open Items sheet

    Hi all,
    I have to design a solution in order to modify the selected open items showed in the Process Open Items sheet. I mean, I want to clear 2 concert items (I know every feature for each one) but the selection criterion match some items else, so I need to deselect the extra open items. This change is in order to create a BI to automate the clearing process.
    I know you are thinking, ok man you just need to use the Automatic Clearing transaction (F.13) but it doesnu2019t solve the prerequisites given (the same problem with the selection criterion).
    Could you help me?
    Thanks in advance.

    Hello Rob,
    In fact the transaction provide me the correct criterions, but the internal logic use them like OR's in a select but I need  AND's. Let me explain it better with an example:
    The standard program does something like this:
    Select *
    From ...
    into ...
    where criterion1 OR
                criterion2 OR
                ...             OR
                criterionN.
    But I need to modify this selection like follows:
    Select *
    From ...
    into ...
    where criterion1 AND
                criterion2 AND
                ...             AND
                criterionN.
    I don't how to attack this problem by User Exit, BADI... I have tried with every resouce i know but  nothing. The last resort is a Z program whith the propper BAPI but this option is not wellcome at the moment.
    Thanks again.

  • Item master - change inventory item also as a purchase item

    hi all,
    How to change inventory item for which BOM is created already also as a purchase item ?

    You will need to delete the Components of the BOM / delete the BOM itself.  Change the Item type and re-define the BOM.
    Suda

  • Open items (F110 payment proposal)

    Hi All,
    Can someone clarify what are open items
    1: invoices that are not cleared
    2: credit memos
    3:credit memos applied  to an invoice
    4:residuals
    (When i run FBl5N credit memos are also shown as open items)
    Also when i run F110 payment proposal  it selects open items. Does it also select credit memo's?
    Any help appreciated
    Thanks,
    Prashanth

    1: invoices that are not cleared -  YES
    2: credit memos - YES, if not cleared against any invoice
    3:credit memos applied to an invoice - YES
    4:residuals - once you do the payment system create new invoice for balance , that will open item
    When i run FBl5N credit memos are also shown as open items - if not cleared against any invoice that will come under open item list.
    Also when i run F110 payment proposal it selects open items. Does it also select credit memo's?  - YES, which are in red , are called as open items...all the items in open will come in F110 proposal run
    VVR

  • Open item manement

    hi all
       while creating gl account i am not given option for open item mangement after some postings i came to know tht is open item mangent how to make it now this as open item
    regard s
    raman

    HI Raman,
    Go for Tcode FS00> Select that GL account>Go in change mode button.
    In second tab (control data) there is check box for Open Item Management.You can select check box for activaitng open item management.
    Only those transactions will come under open items which have posted after activating open item management. Old transactions wont be affected.
    Regards,
    Nilesh Joshi

Maybe you are looking for