VCR with firewire

Hi,
   Has anyone tried to use a VCR with a FireWire to capture into Premiere Pro CS4 ???
   Thanks,
      Peter

I sometimes do this if I'm not at my machine with the analogue capture card.
- Attach "AV input/output" (often red/white/yellow composite RCA's to minijack) cable to your (firewire equipped) handycam or deck.
- Hit PLAY on the VCR
- Hit CAPTURE in PP
- Vision and sound should "pass through" the camera and be captured by PP as though the camera was rolling tape.
Naturally there are no "remote control" options in PP.
MP

Similar Messages

Unable to Capture HDTV with Firewire

I would like to use the Firewire out capability of my LG HDTV and record video into the computer.
I've connected the G5 and tried using iRecord 0.4 and VirtualDVHS. The TV recognizes the 1394 connection and will often tell me it is transfering data, but no application has received any video. The time counter will increment, but the destination file stays at zero size.
I've downloaded FireWireSDK21 and looked over the applications and some of the source code. Wow, there is a lot to learn to figure out what is going on here.
I've wondered if buying QuickTime Pro will help, I only hesitate to do this because in the past, as soon as I buy Pro, a new QuickTime comes out and I have to do it agian. I'll buy it if it will help. So, Will it help to have QuickTime Pro?
I am also looking at some of AVCVideo applications in the SDK and wonder of these might be closer to what I want to work with. So, With Firewire, how specific are devices, i.e. do I want the G5 to look like a DVR or something else?
Finally, iMovie seems to expect to see a camera and the video from the TV does not seem to look like a camera (iMovie tells me no camera is connected). Is there a plug in or tool to trick iMovie or add capability to it to act as a DVR? I've downloaded FireWireSDK21 and looked over the applications and some of the source code. Wow, there is a lot to learn to figure out what is going on here.
Thanks! This was posted in another forum for a few weeks with no repsonses, this is the last chance.

Vidi didn't work.
The TV Firewire and Vidi had no compatible modes.
I suspect that iRecord and VirtualDVHS offer the same capability. There is some setting on the Firewire stream that is compatible with none of these programs. Still looking for a solution.
Thanks.

I have a Canon Vixia HV30 and would like to know if I can transfer video from it to a new MacBook Pro? The camcorder has a HDV/DV output. Is that compatible with firewire?

I have a Canon Vixia HV30 and would like to know if I can transfer video from it to a new MacBook Pro? The camcorder has a HDV/DV output. Is that compatible with firewire?

Hi Codye24
I don't know if you saw this thread
Connecting a Canon HV30 camcorder vai a thunderbolt port to a new imac
Hope that this helps
Kevin

Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if I upgrade to Lion and then restore from the external drive?

I ordered the disk to update to Snow Leopard. Did that so I could get the App Store. Did that so I could download Lion. After I installed Lion my MacBook is super sluggish. Takes like 6 seconds just to open a drop-down menu in Finder.
I have been backing up. Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if wipe my drive using the USB Lion OS stick (which I think I'll have to buy even though I downloaded the new OS online)? I have been plugging my laptop into the Lacie drive set on "auto" and it's been working great.
One Genius said yes "you will get everything back" but my Mac buddy says "say goodbye to most of your apps". Then a guy at the university I asked "do you have a disk image". And I said "what the **** is a disk image?".
Is the problem that I installed an OS on top of new OS without wiping the drive? Or, is my MacBook Pro too old? Do I need to buy a new one?
15-inch, Late 2008
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Any help?

SA will indeed transfer accounts, files and apps at first start. Can do so even faster if you clone the internal HDD onto the external (just split into a partition large enough to contain it) and then use it as the source. Probably faster than Time Machine too. The safest and quickest way to do a disk image or clone is using CarbonCopyCloner (free), and it will preserve the Lion Recovery Partition too.
Since you'll have to re--download the Lion installer again, note that you can concoct your very own Lion Installer USB Stick with it prior to reinstalling and not have to pay for the Apple-branded version. See Kappy's tutorial: https://discussions.apple.com/thread/3786371?tstart=0
As for the sluggishness, I believe that a great part of the cause is that you only have 2GB RAM. Don't know if your Mac can take more but try at least to get to 4GB, if not 8GB. Should attempt this before messing with the reinstall, as this may get you what you want.

Time Machine backup problems with firewire 800 since Mavericks

Since I installed Mavericks about a week ago, I have had problems with TM not working with my LaCie external drive. At best, it would not back up when the mac was awakened from sleep mode and in use. When I would open time machine preferences, I would see the "preparing for back up" prompt that would last forever. Not only was it doing that, I have found that it would freeze my mac. I figured this out when I was not able to get my mac to respond from the login screen. It was basically frozen and couldn't log on. I noticed the back up drive light flickering but nothing would happen even with waiting a long time. I finally figured out that shutting off the TM EHD would unfreeze the mac and it would start functioning normal again. This was happening with my external HD daisy chained to another external drive that contains my iPhoto, iMovie and Itunes files. That drive was also connected to the mac using firewire 800. I tried many different configurations, switched the order the drives were daisy chained, tried different cables and even directly connected the TM drive with firewire 800 to the mac, but the problems still persisted. The strange thing is that when I connect the TM drive through USB, it works flawlesly and no hanging up of the computer. Thats what Ive been forced to do. I have my other EHD connected directly through firewire 800 and it works fine. I only have one firewire 800 port, and since it works fine with my other LaCie drive, it makes me think its not the port or macs hardware? I can only guess this is a Time Machine issue or something wrong with my TM drive? I have been in contact with LaCie and given them all these details but I have not heard back yet on what they feel the problem is. I thought I would post this to see if anyone else had some experience with this problem.

Forgot to mention I did that. Completely erased and reformatted HD and then reconnected to TM. Didn't help. I did have the mac hang up while installing Mavericks and had to eventually shut off the external drive. It did that to me the firs time I tried to install Mavericks and I lost all my data because it did a clean install after that. I had another back up on CCC so I just restored from there. This time the update to Mavericks transferred my data. I have had TM hang up my mac in the past on occasion, but I was always able to shut down the drive and then the mac would return to normal. Perhaps I should try to erase and reformat again?

Ipod with firewire cable

My son was given an older, 1st gen, I think, Ipod that seems to only work with firewire cable. Is there a way to charge this directly on a laptop with USB portsw only? Will a newer cable with USB work on the Ipod (so far using my cabling it doesn't seem to).
I wanted to try to buy a Firewire wall charger (the one he got seems not to be working very well), but I couldn't find any on the Apple website.

If it's a 1st or 2nd gen iPod, it does not have a dock connector; it has a FireWire port (like an external hard drive). So the FireWire cable used with it would have a FireWire connector at both ends.
Will a newer cable with USB work on the Ipod (so far using my cabling it doesn't seem to).
If you are able to try using your USB docking cable, the iPod is probably a 3rd gen. Does it have a touch wheel and four round touch button in a line between the wheel and display? It was the first iPod with the standard dock connector, but unfortunately, the 3rd gen iPod was designed to work with FireWire, so it will not charge over USB.
Apple does not sell the FireWire power adapter these days, but you can find them on eBay. Make sure it is the FireWire type.
If you want to use USB 2.0 to connect and sync the 3rd gen iPod, and you are able to get a FireWire power adapter, you can get this special cable that Apple still sells.
http://store.apple.com/us/product/M9688G/A
It has both a FireWire connector and a USB connector. You connect the USB connector to your laptop USB port. At the same time, you connect the FireWire connector to the FireWire power adapter to supply power for charging.

External hard-disk not working with firewire under Snow Leopard

Hi. I have a LaCie d2 external hard-disk that has Firewire 800, 400 and usb2. I previously used it on my old (angle-poise) iMac connecting using the Firewire 400 socket. I've just a got a new mac with Snow Leopard and I thought it would we best to connect to the LaCie with Firewire 800. However when I do this, the disc mounts ok, but browsing in the Finder is really slow and copying files from the disk to the imac seems to work at a really slow rate (less than USB1 speed) if at all ! However, I switched to using the USB2 connection instead and it works like a dream. What gives ? Is Firewire in Snow Leopard buggy ??

There's no problem with the drive.
Maybe true, and the drive would probably work fine with Leopard. One thing that's obvious is that Apple did make changes in the way that FireWire works in Snow Leopard. Many drives and drive manufacturers work well with SL, but there have also been reports of firmware issues by Western Digital and other companies.
Have you checked with your vendor to see if they are offering a firmware update for your drive?
BTW, I got a new FW case a few months ago while at a Fry's electronic store. The brand new USB2 and FW400 cables worked fine. The FW800 cable did not, but another cable came to the rescue. Just saying...

I have a Powerbook G4. I want to use an iMac desktop, the model that is shaped llike a lamp, as an external monitor. Can I do this with firewire or USB cable or do I have to have a different cable?

I have a Powerbook G4. I want to use an iMac desktop, the model that is shaped llike a lamp, as an external monitor. Can I do this with firewire or USB cable or do I have to have a different cable?

You need a network connection and a product such as ScreenRecycler. All such products require a bootable OS on the iMac.
(58362)

Connecting Canon HV30 to New Macbook pro with firewire 800

I just received new Macbook pro 2.8 that only has 9 pin firewire 800 connectivity. My previous IMac accepted my Canon HV30 HD video through 4-6 pin firewire 400 with ease, the new laptop will receive the video through 4-9 pin cable but the video color is severely distorted and unusable. Is there a problem with firewire 400 to 800 transfer compatibility?

Yeah, FW400 is compatible with FW800. Only need to find the conversion cable with the correct connectors.Try getting that first and connecting the two, to see if the Mac recognizes it and enables capture. Else visit the camera maker's site to check if they are providing Mac-specific software.

How to Run a SCSI Scanner with Firewire In OS X?

Does anyone know how to run a SCSI scanner with Firewire in Mavericks?
I have unsuccessfully tried the RATOC FR1SX SCSI-to-Firewire converter. The Ratoc is recognized as a Firewire device in the System Profiler (see pic below). However, the VueScan scanning software does not recognize the scanner. I know the scanner works because I have been using it in an old HP PC. As such I installled Windows 7 64 bit via Boot Camp to see if I could use the scanner, but had no luck.
I have an iMac 21.5-inch, Mid 2010.
ANY HELP?

The Mac scanner driver is not seeing it as a native SCSI device assuming VueScan supports the model of scanner you have. (You did not list the scanner model.)
Other than getting a modern non-SCSI scanner, a possible option would be to get a Thunderbolt PCI expansion chassis and a 'real' SCSI interface card. There is no guarantee this will work though as SCSI has been discontinued in the Mac world for years and years. If you then want to look at a SCSI card for use with the expansion chassis then look at the following.
Hmm, just looked the AttoTech SCSI cards have been discontinued as well, as I said SCSI is ancient history in the Mac world.

Kernel panics, graphic file corruption with Firewire

I've been having consistent problems with Firewire since I got my Mac Pro last year. I only recently narrowed it down to Firewire so I thought I'd write it up here for the record.
I never actually solved the problem, just started using USB-2 instead and the issues went away.
--I had been getting pretty consistent kernel panics while doing backups or large file transfers to an external FW drive. I tried a few different drives and cables and the panics were consistent.
--I also noticed a strange problem where graphic files I'd backed up (TIFF, JPEG, etc.) would have these single-pixel horizontal streaks running through them. This was a little disconcerting because it wasn't picked up during verification, it was just there when I opened the backup file.
I found lots of people with FW problems in these forums but none mentioned that strange file corruption I got.
I'll try FW again after a future system software upgrade but I'm giving up on it for now.

I've been having consistent problems with Firewire since I got my Mac Pro last year. I only recently narrowed it down to Firewire so I thought I'd write it up here for the record.
I never actually solved the problem, just started using USB-2 instead and the issues went away.
--I had been getting pretty consistent kernel panics while doing backups or large file transfers to an external FW drive. I tried a few different drives and cables and the panics were consistent.
--I also noticed a strange problem where graphic files I'd backed up (TIFF, JPEG, etc.) would have these single-pixel horizontal streaks running through them. This was a little disconcerting because it wasn't picked up during verification, it was just there when I opened the backup file.
I found lots of people with FW problems in these forums but none mentioned that strange file corruption I got.
I'll try FW again after a future system software upgrade but I'm giving up on it for now.

Install Leopard with Firewire on G4 imac

I bought a 1ghz G4 imac with 768mb memory. I am using firewire to install Leopard on it from a Macbook 2008. I create a new partition, I apply GUID. It installs fine. On the Macbook screen it shows up fine. When I disconnect the firewire, drag the hd image of the G4 to the trash on the Macbook screen and turn on the G4, all I get is the flashing folder/face. I hook it up again with firewire to the Macbook and the install shows up. What step did I miss???

Are you using a retail copy of Leopard? If it's the one that came with your MacBook, it's machine specific and won't install on your G4. GUID is an intel partition method, you need Mac OS Extended (journaled).

Lion very slow starting apps with Firewire 800 drive mounted. Any ideas?

Lion very slow starting apps with Firewire 800 drive mounted.
When my Firewire 800 drive is in sleep mode, when I start up an app like MS Excel or Addressbook. I get a spining wheel and a delay before the app launches. Any ideas? Never happened in 10.6.

Long shot: What format is the drive?
Regards
TD

Maxtor OneTouch III does not mount with Firewire

My Maxtor OneTouch III does not mount with Firewire.
I changed both cables, and ports on the drive to try with my 400 port on the MacBook Pro.
The drive will start up, the light will flash, remain steady, flash again. And then just as the Mac finishes booting, the light turns off and it does not mount.
It works just fine with a USB cable. But I bought it so it could be used as a firewire drive.
Other firewire drives work.

Hi Judy,
Has this external HDD ever worked while connected with FireWire? (In other words, did the drive just stop working via FireWire, or is this the first time you've tried to hook it up via FireWire?) Does it work over FireWire on another Mac?
If the answer to those questions is no, it's likely that the firewire ports on the external HDD are bad.

I am buying an audio interface with Firewire output, would I feed this into Firewire,USB or Thunderbolt for Garageband?

I am buying an audio interface with Firewire output, would I feed this into Firewire,USB or Thunderbolt for Garageband?

I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
Did you choose the H4 input channel in the track info?

VCR with firewire

Similar Messages

Maybe you are looking for