VCS-C and Expressway co-residency

Hi,
is the co-residence of VCS-C and Expressaway supported in both BE6K models, or only on the High Density one?
Thanks
V

Hi,
Yes, this is possible for both server options provided that you follow and comply with the co-residency policy.
Don't forget, you will need to purchase the Virtualized Expressway application and licensing separately.
Regards,
Andy

Similar Messages

  • Installation VCS Control and Expressway vmware applications on one BE6000

    Hello Community,
    I want to buy one BE6000 and additional VCS Expressway vmware application. Then I'm going to deploy VCS Control vmware application and VCS Expressway vmware application on this BE6000. Also I plan to place this BE6000 in the DMZ.
    Please help me, may I do that kind of deployment - VCS Control and Expressway vmware applications on ONE BE6000 ?
    Thanks in advance.
    Regards, Maksim.

    The BE6000 supports VCS-c I belive you would need a seperate box for the VCS-e
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps11369/at_a_glance_c45-720492.pdf
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/BE6000/InstallationGuide/9_x/CUCM_BK_IA4BAD3A_00_installing-cisco-business-edition-6000.pdf
    Also I would check Cisco site for the new Co-residency Policy Requirements
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/BE6000/Coresidency/9_x/BE6K_coRes.html

  • Info required for VCS control and expressway upgradation

    Hi Folks
    We have a VCS control and VCS expressway in our enviornment.VCS control is in cluster with another VCS control and same is for VCS expressway.We are planning these to upgrade it on X8.1 version both control and expressway.Your experts view are required on the below points :-
    1) The VCS control is configured in cluster how we need to proceed with upgradation first with master or with slave VCS.
    2) Where we can take the backups of the VCS
    3)Whre we can download the software for both expressway and control
    4) Both VCS control and expressway are in communication with each other.Which one we need to upgrade first expressway or control.
    Regards
    Tarun

    Hi Tarun,
    If you are thinking to go on x8.1 then obviously i assume that you must be running TMS-PE for provisioning.
    Compared to legacy (opends) method, PE is more flexible and it is simple to upgrade.
    i will suggest you to go through the below document for upgrading the cluster.
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Cluster-Creation-and-Maintenance-Deployment-Guide-X8-1.pdf
    - i think you should first take the backup of VCS, atleast backup of master server. to do that go to maintenance and from there you would go to "backup and restore" and backup the VCS
    - you can go ahead with upgrading your  VCS slave first and then master, atleat i take that approach!! i never saw any issues with that may be some one else take a second approach.
    -  you would be able to download the software at the below page.
    http://software.cisco.com/download/release.html?mdfid=283733603&softwareid=280886992&release=X8.1&relind=AVAILABLE&rellifecycle=&reltype=latest
    - again you can first target VCS-E and then VCS-C (again no thumb rule for that), untill some else think of some other things.
    regards
    Alok

  • Certificate for VCS Control and Expressway

    Dear Team,
    We have generated the CSR request for VCS-C and E and customer has given three certificate against VCS-C and three against VCS-E.
    Certificate names are given below
    Hostnamevcsc1_ABC_com.crt
    DigiCertCA.crt
    TrustedRoot.crt
    Kindly advise how to combine them as we need only one .pem file to upload to the VCS.
    BR

    Hi I have spoken to CA there is a option to download certificate in pem format for Cisco.
    I have downloaded and its working now.

  • CUCM, VCS-Core and Edge, B2B Calling

    I have CUCM ver 9.1(2) and VCS 8.1.1 in my environment, the VCS-C and VCS-E are currently setup to do MRA which is working fine for the vpn-less Jabber.
    We also have a number of SX series Telepresence codecs dotted about which are registered to the CUCM and used for internal video conferencing, now the company is wanting the ability for outside video conferencing so need to setup the B2B capability (licencing has been sorted out already for Rich Media Sessions)
    I've been ploughing through a number of docs on this, I have not found one yet specifically for CUCM registered devices and VCS doing nothing but firewall traversal, so the guides I've been working from are for enabling CUCM registered devices to talk to VCS registered devices and just taking relevant bits such as Neighbour zones and SIP trunks from it.
    Does anyone know of a guide specifically for the direction Cisco appear to want us to go, which is Telepresence devices registered to CUCM and the VCS just doing firewall traversal.
    Or a guide on the firewall traversal part only and I can tack it on to my notes from the other adapted guides.
    My current notes have the following tasks I think I need to do to get this working
    - setup partition and CSS on the CUCM for Telepresence calls
    - setup SIP trunk on CUCM pointing to Expressway-C (have subnotes on requirments for SIP Trunk Security profile and the SIP Profile)
    - SIP route pattern(s) on the CUCM pointing to the SIP trunk
    - Enterprise parameters on the CUCM such as Cluster FQDN, Organization Top Level Domain and URI Lookup Policy
    - On the VCS-C a neighbour zone pointing to the CUCM
    - Search rule to route inbound calls to CUCM neighbour zone
    Is this looking correct so far?  If so then what else will I need to in relation to traversal zones and VCS-E call routing to get calls in and out the business?
    thanks in advance
    Tigre

    Was checking the logs on the SX10 itself, appears to be reporting the same thing about 503 Service Unavailable, I had the logging on it set to "Extended Logging"
    (NB - the address 10.1.99.198 in this case is not the SX10, it is my laptop as I was using the SX10's webgui to remotely control the device and make the call)
    Currently discussing this issue with Cisco TAC, will update as and when more info comes
    Line 1113: Sep 10 15:24:56.367 a9 appl[1529]: 6097.58 CuilApp   User admin(1001) about to execute command '/Phonebook/Search ContactType: any Limit: 100 Offset: 0 PhonebookType: local SearchString: [email protected]' from 10.1.99.198.
    Line 1114: Sep 10 15:24:56.375 a9 appl[1529]: 6097.58 CuilApp   User admin(1001) about to execute command '/CallHistory/Recents DetailLevel: Full Limit: 100 Offset: 0 SearchString: [email protected]' from 10.1.99.198.
    Line 1115: Sep 10 15:24:56.384 a9 appl[1529]: 6097.59 CuilApp   User admin(1001) about to execute command '/Phonebook/Search ContactType: any Limit: 100 Offset: 0 PhonebookType: corporate SearchString: [email protected]' from 10.1.99.198.
    Line 1117: Sep 10 15:24:58.634 a9 appl[1529]: 6099.84 CuilApp   User admin(1001) about to execute command '/Dial callType: Video number: [email protected]' from 10.1.99.198.
    Line 1125: Sep 10 15:24:59.154 a9 appl[1529]: 6100.36 MainEvents I: OutgoingCallInvoked(p=3) remoteURI='sip:[email protected]' localURI='sip:[email protected]' bookingID=''
    Line 1164: Sep 10 15:24:59.859 a9 appl[1529]: 6101.07 MC I: CallParticipant: calledUri: sip:[email protected]
    Line 1190: Sep 10 15:24:59.890 a9 appl[1529]: 6101.10 SipPacket   INVITE sip:[email protected] SIP/2.0
    Line 1196: Sep 10 15:24:59.892 a9 appl[1529]: 6101.10 SipPacket   To: <sip:[email protected]>
    Line 1295: Sep 10 15:24:59.960 a9 appl[1529]: 6101.17 SipPacket   To: <sip:[email protected]>
    Line 1306: Sep 10 15:24:59.967 a9 appl[1529]: 6101.18 SipPacket   To: <sip:[email protected]>;tag=1393374~8642d04e-70cd-49a5-b73c-5ca5fe21b218-48171693
    Line 1313: Sep 10 15:24:59.970 a9 appl[1529]: 6101.18 SipPacket   ACK sip:[email protected] SIP/2.0
    Line 1318: Sep 10 15:24:59.972 a9 appl[1529]: 6101.18 SipPacket   To: <sip:[email protected]>;tag=1393374~8642d04e-70cd-49a5-b73c-5ca5fe21b218-48171693
    Line 1328: Sep 10 15:24:59.979 a9 appl[1529]: 6101.19 MainEvents I: CallDisconnectRequested(p=3) remoteURI='sip:[email protected]' cause=[normal('') 'LocalDisconnect']
    Line 1333: Sep 10 15:24:59.986 a9 appl[1529]: 6101.19 MainEvents I: CallDisconnected(p=3) remoteURI='sip:[email protected]' causeToLocal=[disconnected('Service Unavailable') 'RemoteDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

  • Two EX90 devices can make video calls over Internet with No VCS-C and VCS-E

    Dear Experts;
    I  have just started TelePresence and VCS 2 weeks before by going through cisco docs and videos and I had taken a risk of implementing the infrastructure elements.
    We are now implementing Cisco Tele presence with VCS-C, VCS-E TMS,TCS,MCU and End points with  Jabber in One setup.
    and in another setup CUCM 10.5,UCCX 10.5 IM&P,Jabber with some 10 agents.
    Now the question is In our same building in 2nd floor we have one EX90 and in 5th Floor one EX90 and over LAN we can make video calls using IP address.
    In the same way is it possible to make  a video call between 2 EX90 devices present in different location in the same city over Internet without the involvement of VCS-C and VCS-E.
    Appreciate your valuable reply.
    Regards
    Debashis

    The simple answer to that is NO! Where is the EX90 registered to at the moment? Is it on the VCS? or CUCM

  • Supporting Multiple domains in IM&P with and Expressway deployment?

    Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated.
    My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and they are looking to enable Mobile Remote Access, B2B Video and XMPP Federation. One issue is that the Jabber domain that was selected 1 year ago for the pilot was a local domain. The reason for this is because the multidomain support was not available at the time. Internally there are 3 domains. example.ca, examplesales.ca, and examplebanannas.com. Their Jabber ID they use today is example.root.local. I am reading through the guides and it seems as though IM&P allows you to map a JABBER ID to an email address or a directory URI. This will allow multiple presence domains within one Presence cluster. The problem is that it appears as though federation will not work through expressway core / edge if you use this method. Can this be confirmed?
    I am providing you these URL's only for guidance, to show you how I arrived at my situation where I’m asking for help on a configuration change to my customers IM&P settings.
    note the section on page 41 of the following guide http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-5-1.pdf
    One would presume that Multi-domain support is now supported with expressway core & edge. The caveat I found on page 4 of the following guide in relation to xmpp federation.
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
    and page 10 of the following guide
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
    and this section
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01010.html#CUP0_RF_CAF8AEDD_00
    Expressway-E does not support XMPP address translation (of email addresses, for example). If you are using Expressway-E for XMPP federation, you must use native presence Jabber IDs from IM and Presence Service.
    This being said
    Based on my findings, I believe Cisco now supports multi-domain setup for IM&P with the "caveat" federation still doesn't work. My customer is not happy with this but still would like to proceed with the rest of the benefits that MRA brings to the table for their Jabber deployment. 
    To support the above scenario it is my understanding I need to make an adjustment to the configuration of IM&P. As I stated when I opened the case my customer’s current IM&P domain is “example.root.local” their JID is made up of [email protected]. It’s my understanding we cannot use this domain and activate MRA so we need to adjust everyone’s JID to be a Publicly routable DNS name. Since everyone that has a JABBER account also has an email account I was thinking we map the JID to the email. I’m trying to understand how to get from where we are to where we need to be. I found this guide but it doesn’t talk about the effects of doing this on a live system setup the way my customer is setup.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01100.html
    I am also not certain this is the setting I’m looking for. I believe what I need to change is actually on the Presence server under the domains section I found this
    Domains Configuration
    Use the controls on this window to view and edit domains managed by the IM and Presence Service. Previously, the IM and Presence Service supported a single domain. With this release, you can specify multiple domains.
    Before You Begin
    To take advantage of multiple IM and Presence Service domains, you must choose Directory URI as the IM address scheme on the Advanced Presence Settings window. If the IM address scheme is set to UserID@domain, the default domain is used for the IM and Presence Service. The status of the IM Address Scheme setting is displayed at the top of the window in the Status box. The Status box contains a link to the Advanced Presence Settings window.
    Is this what I need to do?

    Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated.
    My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and they are looking to enable Mobile Remote Access, B2B Video and XMPP Federation. One issue is that the Jabber domain that was selected 1 year ago for the pilot was a local domain. The reason for this is because the multidomain support was not available at the time. Internally there are 3 domains. example.ca, examplesales.ca, and examplebanannas.com. Their Jabber ID they use today is example.root.local. I am reading through the guides and it seems as though IM&P allows you to map a JABBER ID to an email address or a directory URI. This will allow multiple presence domains within one Presence cluster. The problem is that it appears as though federation will not work through expressway core / edge if you use this method. Can this be confirmed?
    I am providing you these URL's only for guidance, to show you how I arrived at my situation where I’m asking for help on a configuration change to my customers IM&P settings.
    note the section on page 41 of the following guide http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-5-1.pdf
    One would presume that Multi-domain support is now supported with expressway core & edge. The caveat I found on page 4 of the following guide in relation to xmpp federation.
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
    and page 10 of the following guide
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
    and this section
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01010.html#CUP0_RF_CAF8AEDD_00
    Expressway-E does not support XMPP address translation (of email addresses, for example). If you are using Expressway-E for XMPP federation, you must use native presence Jabber IDs from IM and Presence Service.
    This being said
    Based on my findings, I believe Cisco now supports multi-domain setup for IM&P with the "caveat" federation still doesn't work. My customer is not happy with this but still would like to proceed with the rest of the benefits that MRA brings to the table for their Jabber deployment. 
    To support the above scenario it is my understanding I need to make an adjustment to the configuration of IM&P. As I stated when I opened the case my customer’s current IM&P domain is “example.root.local” their JID is made up of [email protected]. It’s my understanding we cannot use this domain and activate MRA so we need to adjust everyone’s JID to be a Publicly routable DNS name. Since everyone that has a JABBER account also has an email account I was thinking we map the JID to the email. I’m trying to understand how to get from where we are to where we need to be. I found this guide but it doesn’t talk about the effects of doing this on a live system setup the way my customer is setup.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01100.html
    I am also not certain this is the setting I’m looking for. I believe what I need to change is actually on the Presence server under the domains section I found this
    Domains Configuration
    Use the controls on this window to view and edit domains managed by the IM and Presence Service. Previously, the IM and Presence Service supported a single domain. With this release, you can specify multiple domains.
    Before You Begin
    To take advantage of multiple IM and Presence Service domains, you must choose Directory URI as the IM address scheme on the Advanced Presence Settings window. If the IM address scheme is set to UserID@domain, the default domain is used for the IM and Presence Service. The status of the IM Address Scheme setting is displayed at the top of the window in the Status box. The Status box contains a link to the Advanced Presence Settings window.
    Is this what I need to do?

  • How to sync iPhone with MBP connected via ethernet to PowerBook where iTunes and iPhoto content resides

    I just got the iPhone 5, but I am still using a PowerBook G4 machine that will not sync with my new iPhone.  I was wondering if I could
    1) create a new user for myself on my brother's MBP
    2) connect that MBP with my PowerBook via ethernet
    3) have iTunes and iPhoto on my new MBP user to be mapped to my PowerBook iTunes and iPhoto Library folders respectively
    4) sync the iPhone with my new user on my brother's MBP and acquire all of the content from the iTunes and iPhoto libraries that reside on my PowerBook
    Will this work?  Does anyone recommend a different solution to get the content from my PowerBook G4 1.33 to my new iPhone 5

    Now I have made a search and you are right. A problem which seemed unique to me is, in fact, very common. It is unbelievable that on one hand the Apple programmers can create great software, but on the other hand they act like retards when they forget about some basic functionality. I really can't believe that I will lose my purchases simply because at Apple nobody thought that people do install a fresh system from time to time. What a shame.
    But what about consolidation of accounts? I am being asked to provide account ID which I don't even remember anymore. It seemed natural for me that I download some applications and simply go on with life, just as in about any other website on the internet. But suddenly Apple says that I will not be able to save or transfer my application because I need some funky ID. Hello Apple... My application is already on my phone so I should be able to copy it where I want without some ID. That's really odd.
    Anyway, I will try to search the forum and solve my problems. I simply didn't even think in my wildest dreams that Apple software could be sometimes so ********.

  • Can motion 4 and motion 5 reside on the same cpu?

    I have motion 4 and want to use 5 for a project, but don't want to corrupt projects that are still in the edit process in 4. Can these two versions reside on the same cpu or does 5 over-right 4?

    Yes, without overwriting. Take a look at this article. The second recommendation describes the steps to take if you don't want to partition.
    Russ

  • Can Movie and TV files reside on different (external) HD?

    My entire iTunes library currently resides on my internal HD. I would like to keep all files, except movie and TV files, on my internal drive so I'll have them when I travel.
    I don't need the movie and TV files with me and would like to move them to an external drive. Is there a way to do this and have iTunes know where to look for them?
    Thanks for any suggestions....
    Lew

    David, welcome to discussions! You may find this link from MacMuse helpful on how to move iTunes to a different drive, either internal or external. I used this information to move my music to an EHD on my old PC where it worked just fine. One trick, you must always boot up the EHD prior to opening iTunes or iTunes will revert the location of the iTunes music folder back to the main drive & you will have a bunch of dead links to your song files. Post back if you have any questions.
    Oops, forgot the link!
    http://discussions.apple.com/thread.jspa?threadID=121879
    Message was edited by: StarDeb55

  • How do I put some songs on the cloud and have others reside on my iPhone?

    Thanks

    Hi,
    If you have iTunes match, all matched, uploaded and purchased tracks will be available to stream. You can download tracks to your phone. When you play a track, it is automatically downloaded to a temporary cache.
    Jim

  • Can iTunes, song files, and library all reside on an external drive?

    I loaded iTunes and also all of my music and audiobook folders onto an external drive. There are no iTunes files or song files on my local drive. However, when I try to populate iTunes by importing the music and audio folders iTunes insists on creating a library, with copies of all audio files, on my local drive. There is not enough room on my local drive to accommodate my entire music collection but there is plenty of room on the external drive. How can I persuade iTunes to create my library on my external drive? I’ve tried importing the folders manually and also by using PodPlus but the result is always the same – I receive a message from iTunes stating that there is not enough room for all the files. Any help or alternative suggestions would be very greatly appreciated. Thanks.

    David, welcome to discussions! You may find this link from MacMuse helpful on how to move iTunes to a different drive, either internal or external. I used this information to move my music to an EHD on my old PC where it worked just fine. One trick, you must always boot up the EHD prior to opening iTunes or iTunes will revert the location of the iTunes music folder back to the main drive & you will have a bunch of dead links to your song files. Post back if you have any questions.
    Oops, forgot the link!
    http://discussions.apple.com/thread.jspa?threadID=121879
    Message was edited by: StarDeb55

  • How to ensure the link between iTunes Library itl file and Music Folder residing on a different drive?

    I'm planning to move my Music Library from a PC to Mac.  Both running iTunes 10.  
    On the PC (Win XP) the iTues folder did not move from My Music folder when music (and videos, books, etc) were moved to a different drive on the PC.  iTunes runs ok, but the itl, xml and itdb files remain in the My Music Folder.
    When I transfer the music (folder and all other contents) to the Mac, and then the itl, xml, itdb files into the new Music>iTunes folder will they still be "linked" or will I need to rebuild the itl from scratch?
    Is there a way to ensure that the itl and music files themselves transfer to the Mac and remain linked once iTunes is launched?
    thanks

    Making a split library portable
    Here are typical layouts for the iTunes folders:
    If the iTunes folder contains the iTunes Media folder as above then the iTunes folder can be moved to a new location/drive/computer without breaking the file references. Although it is possible to migrate a split library from one system to another, the media folder must end up at precisely the same drive letter & path on the target system. This is feasible when moving between Windows systems, possibly feasible moving between Macs, but definitely impossible when moving PC to Mac or vice versa.
    Assume the media folder on the external drive is called ..\<Parent>\<Media> and the library files are in the usual place of <Profile's Music>\iTunes.
    You need to copy the library files and Album Artwork folder into the <Parent> folder, then use the hold-down-shift-when-starting-iTunes method (hold down option for Macs) to open the copy of the database that you've made in the <Parent> folder.
    Once this library has been opened and tested there are a few changes you can make so that it conforms to the standard layout. When iTunes opens it uses the folder name where the database is located as the window name so if the <Parent> folder isn't called iTunes then neither will be the main iTunes window. Close iTunes, rename <Parent> as iTunes and use the hold-down-shift-when-starting-iTunes method to open iTunes again. If <Parent> is the root of the drive, make a new folder called iTunes and move the library files, Album Artwork & <Media> folders into the new iTunes folder instead. Start iTunes, then check under Edit > Preferences > Advanced that the media folder location has been correctly updated and edit if necessary.
    You may also want to correct the media folder name. Having applied the fix above, if it was necessary, close iTunes then rename the <Media> folder as iTunes Media. Start iTunes and again check under Edit > Preferences > Advanced that the media folder location has been correctly updated and edit if necessary.
    Congratulations, your library is now fully portable and you can connect your external drive to any computer running the same build of iTunes, Mac or PC, in order to work with it. Don't forget to deauthorise the old computer if you won't need to access protected content on it again.
    tt2

  • VSOM and VSMS Co-resident in One Server

    We have a two CPS-MSP-2RU-K9  Servers with VSOM + VSMS  in  both the Servers.
    That is  ( VSOM+VSMS) in Server-1  and again  (VSOM+VSMS) in Server-2   .
    Can i have Redundancy for VSMS and also for VSOM by this Method ?
    Does VSOM in one Server-1 can have Control over VSMS in Server-2 ? Is this a Recommended Design ?

    Beginning with VSM7, there are multiple styles of VSMS (media server) redundancy available, depending on the IP Camera matrix you intend to deploy.
    There is currently nothing for *native* VSOM redundancy, aside from using VMWare High Availability when deploying VSM OVAs on Cisco UCS platform only.
    There is much more that goes into a successful design and deployment than the information you have provided here.  My personal recommendation is to leverage your local Cisco ATP partner, or, at a minimum, engage the Cisco PDI Helpdesk (http://www.cisco.com/web/partners/tools/pdihd.html)
    Cheers, and best of luck,
    Scott Olsen
    Solutions Specialist
    Bulletproof Solutions Inc.
    http://www.bulletproofsi.com

  • IPad and other cloud resident purchased movies

    I have quite a few movies that I've purchased from Amazon - which are not downloaded to my Kindle Fire - I usually watch them streamed from Amazon's cloud. I do realize that they are not viewable directly through Safari since Apple bans Adobe Flash from its products. I also know that I can - and have viewed these films using a third party iPad Flash enabled player - but the quality is greatly reduced and the films frequently lose lip-synch. Is there a way to download these films to my PC and covert them to an Apple supported format - such as mov - and transfer them for viewing to my iPad 3 via iTunes?

    no.

Maybe you are looking for