VD 346: Period indicator 1

Hello all,
following problem needs to be solved.
We have added a new form with language Z2 (Serbia),
when we now print a PO in german or english everything is fine,
if we print it in Z2, the system brings error: VD 346: Period indicator 1
I have translated the text of period indicator 1 to Z2, but
the problem still exists.
Thanks for help,
Barbara

I solved the problem by myself. I used FM NAST_PROTOCOL_UPDATE.
LB.

Similar Messages

  • Document Number series doesn't allow to change period indicator

    Dear Experts,
    We are facing a problem while going to change period indicator of any document numbering series from previous year to current financial year.
    There is no problem creating new numbering series for new financial year. But while trying to change previous year period indicator series with current year It shows a error "Series in use" 3535-9.
    We are running SAP B1 Verison 9.02.002 PL 10 Hotfix1 
    Any help please suggest.
    SK
    Note: Last Financial Year while we didn't face this problem in SAP 8.82.070.07.

    I have the same problem. You could solve it?

  • Changing Period Indicator not allowed in numbering series setup

    Hi to all dear experts... and happy new yaer!!!
    I need a little help to solve thi s issue.
    Today i create a new posting period for year 2015 (sub peridos => months)
    After that, i try to change the period indicator in ADMINISTRATION => SYSTEM INIZIALIZATION => NUMBERING SERIES, but at the update, i receive an error message like:
    SERIES ALREADY IN USE  -Name of the series- [Message 3535-9]
    Before update to 9.0, every year i was able tio change the period indicator in Numbering series setup.
    Have some advice??
    Thank's in advance

    Hi.
    Attached you can find a screenshoot with error message.
    For the highlighted row n. 8, i try to change the period indicator from 2014 to 2015.
    Updating, i receive the error "NUMBERING SERIES ALREADY IN USE [Message 3535-9]"
    I'm sure this operation was possible until the 8.82.
    P.S. The language system is in italian.. sorry...

  • SLED period indicator in Material master

    Hi
    I have maintained material master with Period indicator for SLED field as 'D' in plant general data storgae data.
    I wanted to change this to W. I wanted to know is it possible to change this and if yes please provide T Code for this.
    SK

    Dear,
    Follow the Tcode O02k...Here select the first line for Int.Period ..Make it Active and select this line and click on left hand side (Text for period indicator).
    Here in front of your language EN:Enter W in Ext.Period I field.
    Save and come out.
    Now when ever you create Material master...By default it will pick "W".
    Now coming to your existing materials for which you have already maintained "D".
    What you have to do is go to Tcode MM02...Under Plant data storage 1 view change the indicator from D to W.
    If number of materials are large then do it by mass maintenance in tcode MM17 or create LSMW program for it.
    This will def solve your problem.
    Regards
    Utsav

  • Linking a Period Indicator to a Posting Period and Document Numbering

    Dear All,
    Could you please tell me that, what will be the consequences if I do not link a Period Indicator to a Posting Period and use the Period Indicator in any document numbering?

    Hi,
    The use of the period indicators depends on the accounting practice of the company.
    The consequence you will face when you are not using period indicators:
    1.Your document numbering series will be continued from year to year,for ex.if your last document numbering series for AP Invoice is 3489 for FY200809,then the starting series for the FY200910 will be 3490.
    2.You should perform period end closure before proceeding to the next financial year,which would not be possible(Atleast one month in the new financial yr) as we may need to use adjustment transaction for accounting/auditing purpose
    3.Unless you perform year end closure the new series can not be continued,if you continue there must be accepted/explained in the accounts auditing too .
    4.But you don't use period indicator,there will not be any necessity to create new document series for every new financial year.
    Also check this document on [Period indicators|https://websmp105.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000513532005E] for better understanding.
    Hope this is helpful!

  • Period indicator with Fiscal Year Variant in MRP3

    Hi  SAP Gurus,
    I donu2019t know the use of Period indicator with Fiscal Year Variant in MRP3 view.
    For some material  is maintain as
    1. Period indicator u201CMu201D & Fiscal Year Variant as blank.
    & for other materials it is maintain as
    2. Period indicator u201CPu201D & Fiscal Year Variant as V3
    What is the meaning of maintaining those different values ?
    as per my understanding I only know that as per those indicator consumption data is store in table MVER.
    Is there any other table /  data gets affected due to this indicator.
    Plz help.
    Best Regards,
    Parag Save.

    Hi,
    Nomally,  period of  12 months, for which the company produces financial statements or analyse inventory.Under certain circumstances, fiscal years containing fewer than 12 months are also permitted (short fiscal year
    When defining your fiscal year, you have the following options:
    Your fiscal year is the calendar year
    In this case, you must only select the Calendar year field.
    Your fiscal year is not the same as the calendar year and is not year-dependent
    Your fiscal year is not the same as the calendar year and is year-dependent.
    In customizing (spro), you make these setting in transaction OB29.
    Regards,
    SATYAJIT

  • Wrong period indicator linked to 2011 posting periods

    Hello,
    My customer has created new series for 2011 and linked them to 2011 period indicator.
    The problem is that the posting period was linked to 2010 period indicator. They've already created several transactions and therefore the period indicator in the posting period window cannot be updated.
    Any ideas on how to solve it (except for restoring a backup and retyping the transactions)?
    Thanks in advance.
    Best regards,
    Maya
    Problem solved..
    Edited by: Maya Alon on Jan 4, 2011 2:10 PM

    HI Dixit Patel      
    If any transaction has been post in Data base so can't change Posting Period . Do one think Restore ur database Backup before posting period Creation and again create ur posting period correctly.
    Thanks
    Khan Imran

  • Internal error 'Period Indicator' (-2024) OPID

    Dear All,
    Please help me in solving this problem. I am getting this internal Internal error 'Period Indicator' (-2024) OPID occurred on Client system while copying Sales Delivery to Outgoing Excise Invoice. When I am doing the same thing on Server System I am not getting any error it works fine I am able to copy Sales Delivery to Outgoing Excise Invoice. I am using B One 8.8 PL 10
    Regards,
    Noor Hussain

    Hi Noor Hussain,
    Please check your another posting and close this one.
    Thanks,
    Gordon

  • Table PBED - Change in Period indicator

    We have a few materials where the master data was wrongly maintained : the period indicator was set to M instead of P. Due to this setting, the data is stored in PBED using Date type 2 instead of 4.
    We have corrected the material master but we are not able to correct the planned independent requirement's date type 2 and the Period to planning tables.
    This is causing a lot of issues in our Customer service reporting and a numebr of other reports.
    Please help
    Thanks in advance.
    Cheers,
    KB

    KB,
    Why not try deleting the existing PIR and create a new PIR? Its only a suggestion, please try this is in a non-production system before doing in production system.
    Regards,
    Prasobh

  • TIMR6 :Time period indicator: Period

    Dear All,
    When i am uploading attendances in infotype 2002 for 103 employees through lsmw.
    I am getting one field " TIMR6 :Time period indicator: Period" in Display field mapping and conversion rules step.
    What is this called? why it will appear ? What is pupose of this indiacator? How to map it with source field?
    could you pls explain in detail?
    Because of this i am not getting the default value under subtype (Reg Attendance) while running the batch input
    Thanks and Regards,
    Prasad

    Hello,
    Male or female in 0002 is determined the field ANRED. (Mr. Ms.) based on this only the GESCH(Gender key is determined).
    So if a employee is a male fill ANRED with 1 else with 2.
    Thanks.
    Krishna

  • Period indicator in SLED of batch of material

    hello,
    I have question, where can i see if the plant is link when i change the Period indicator of SLED of my material, because when i make a Production Order, and indicate the batch where the material should came from in the General tab of PO there exist Specific data that show the shelf life exp. date of a material i want it to be populated by the shelf life of the batch of my material. currently the Period indicator of SLED is D (Daily-19.05.2009) i change it into M (monthly-05.2009) but in the Specific Data view in PO it still show format 19.05.2009, where should i make correction so that in my PO i will see 05.2009 in the shelf life date?
    Please advice on what should i do.
    Thanks and Regards,
    JJ

    Hi,
    The SLED is depens upon the Following things:
    1. Minimum remaining Shelf Life   
    "The minimum remaining shelf life is the minimum number of days for which the material must keep for the goods receipt to be accepted by the system".
    "Minimum amount of time for which the material must keep upon goods receipt for the goods receipt to be accepted by the system."
    2. Total Shelf Life
    "If you do not enter a total shelf life, enter the shelf life expiration date directly at the time of a goods movement."
    For Batch managed materials we need to set the calculation of the shelf life expiration date in the Transaction: OMJ5.
    For further details follow the below link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/a7/e58464dd9511d185170000e82013e8/content.htm
    Hope this helps..
    Regards,
    Siva

  • LSMW input method error-No Customizing entry defined for period indicator Y in logon language

    Hi,
    I am creating one material through direct input method and its showing error '
    No Customizing entry defined for period indicator Y in logon language'.
    I am passing PERKZ ( periodic indicator ) as blank from file.
    But when i am creating in foreground its automatically taking value 'M' and creating the material.
    And also when i hardcode the value 'M' in LSMW then also its showing same error.
    Can anyone please help urgently?
    BR
    Sumeet

    Check in O02K what is maintained.  As per your error message, External Period Indicator "Y" is missing for that logon language.
    G. Lakshmipathi

  • Adding Period Indicator to New Year after creating draft documents in New Y

    Hi,
    I want to restart the the numbering from 1 in the New Year and so want to attach a new Period Indicator to the New Year. But i am unable to Add Period Indicator to New Year. It was created with Default Period Indicator and is not allowing any change.
    I am in SBO 2005 PL38. Also pleas note, some drafts have been created in the New Year.
    What i tried:
    - I tried deleting the draft documents. No use.
    - I changed server date to March 31(previous Accounting Year). No use.
    Anybody can help?
    Regards
    Manish

    Hi Manish,
    Let me see if i understood your issue;
    You are unable to creat a new period indicator for the new numbering series, did you already creat a new posting period for the new year ?
    The drafts created in the new year are with the default period indicator ? if so can you change it and try to delet those drafts ?
    if you have opportunity please provide more information.
    Regards
    Emanuel

  • Period Indicator C is not defined (ME55)

    Hi,
    I am getting this error "Period Indicator C is not defined" when try to perform ME55 - Collective Release of PRs.
    Any idea what's the problem?
    Thanks a lot.
    Sue

    Hi,
    Please check the scope of list is F instead of C and also put date range
    BR
    Diwakar

  • Default value for period indicator in MM01

    Hello Gurus,
    I have created a transaction for maintaining default value for period indicator in MM01 transaction. User has to maintain the period indicator for Material Type(MTART) and Plant(WERKS) before creating a material master. If it is not maintained, then error message will be generated saying that 'Maintain Period indicator for the Plant and Material Type'.
    I have created an implementation for that in 'Y_BADI_MATERIAL_REF'. For Material type 'FERT' it is working fine.
    But when i try to create a material of type 'RAW1' , im getting a error that 'Mandatory field Profit center is missing' which is already entered in the material master and is not in the part of forecast view i have created.
    During my second testing, i got a different error MRP group 'Y0Y3' is not valid, though i entered it using F4 help.
    When i commented my piece of code in the implementation, error disappeared..
    Im very new to MM, please help me out gurus..
    Thanks in advance.

    Thanks for your reply.
    I know that it can be made as optional entry in OMS9 transaction. But when i deactivated my BADI, that error disappeared.
    Is there any relation between the period indicator and profit centre ?
    And also while creating a material, when i select the MRP group from the dropdown list(F4), whatever the group i select, im getting an error 'MRP group does not exists'. But when i deactivated my BADI, it disappeared.
    Im really confused why am I getting such errors because of this BADI.
    Please help me out...

Maybe you are looking for

  • Installing B1iSN on Windows 7

    Hello, I am in the process of  installing B1iSN (PL08) on windows 7 Pro OS. B1iSN installation doest any go furher after Databas server username/pwd screen. There is a log file created in C:\Temp.  But this 'setup_0.log' file doest have any useful in

  • Issues with creating transport request for cross client changes???

    Hi, In our ECC 6.0 dev system, functional team makes all their configurations in client 100.But ABAP team is using another client 120 to create /modify ABAP objects. So all workbench requests getting created in client 120. I would like to have all cu

  • Complete control via USB of webcam or digital camera

    Hi, After searching in the forum and over internet, I finally decide to post my question. I'm looking forward to control a webcam via usb with Labview 8.5. I want to be able to have a full control over the camera settings, particularly for acquisitio

  • Problems with Java Scripting API

    Hello Everyone! Guys, I need help with Java scripting API. A problem is that I cannot understand how can I operate Java Object's fields and methods from the script language. I have chosen embedded javascript to work with. And I can get the fields and

  • How can I learn to use my new Mac Air?

    How can I learn to use my new Mac (I am a long time user of Windows), without having to go to Apple Store. Ours is 50 mi. away. Is there such a remote service? (Apple's or otherwise)