VDA is not Shown in Basic pay and PC00_M40_DAB,

Dear Experts,
My Client for the first time providing Variable DA.The steps followed by them are as follows:
First step They updated date in Dearness Allowance Price Index code with 1.03.2011.
Second step PC00_M40_DAB have given payroll Area.But VDA is shown for 7 employees out of 311.
And from side checked all the configuration and tales like V_7INA9,7INA3 and T510 etc.Everything is configured properly.
So kindly let me know any other cofiguration to check.
regards,
Surekha

Your suggestions are Valuale to me.
So Please provide some help.
regards,
Edited by: Surekha_PWC on May 11, 2011 11:12 PM

Similar Messages

  • Ipod not shown in my computer and iTunes

    As I stated before it's not shown in my Computer and iTunes. I called apple supprt and they couldn't help me. At device manager it is shown under usb devices as iPod but with a (!) mark. When I dubble click it it says
    "Driver for this device not installed (Code 28). Click on reinstall driver to reinstall the drivers for this device."
    When I click that it searches and after a while I get a window wich says this:"
    There's a problem with the installation of this hardware:
    [USB LOGO] iPod
    An error occured while installing the device.
    The servicedatabase is locked.
    Click Finish if you want to close the wizard."
    But I did install all software (I got iTunes, Quicktime, iPod updater 2006-06-08)!
    NOTE: It does work on other computers, atleast Macintosch didn't try any pc 'cause I don't have any but this one.
    I did translate the messages, the were originally in Dutch.
    30GB iPod 5G   Windows XP Pro  

    please someone help me!

  • Since OES 11 SP2 computer members of groups are not shown in AD Users and Computers mmc snapin

    I have several groups of computers in my DSfW Domain, They are mainly
    used to apply different GPOs to different groups.
    If you look via iManager or C1 at the properties of the groups you see
    the computers, which are members of the groups on the membership and
    security self equivalancy pages.
    If you use the MS AD snapin the memberlist of the group shows not any
    computer - but the computer(user) template shows, that the computer is
    member of the groups in question. It seems as if the GPOs are applied
    correctly using the group membership.
    But the question remains, why are the computer members not shown in the
    group template. They did show up there before OES 11SP2, so it seems
    some attribute got lost or is not correctly interpreted on the AD side.
    W. Prindl

    Originally Posted by W_Prindl
    I have several groups of computers in my DSfW Domain, They are mainly
    used to apply different GPOs to different groups.
    If you look via iManager or C1 at the properties of the groups you see
    the computers, which are members of the groups on the membership and
    security self equivalancy pages.
    If you use the MS AD snapin the memberlist of the group shows not any
    computer - but the computer(user) template shows, that the computer is
    member of the groups in question. It seems as if the GPOs are applied
    correctly using the group membership.
    But the question remains, why are the computer members not shown in the
    group template. They did show up there before OES 11SP2, so it seems
    some attribute got lost or is not correctly interpreted on the AD side.
    W. Prindl
    This might be the side-effect of some bug fix we did in oes11sp2, and will require deeper debugging. Please raise the SR with appropriate priority so that we give greater attention.

  • App tabs not shown after browser closes and reopens

    Greetings.
    I tryed to use the new App Tabs future, i pinned some tabs, but after i close the browser and reopen it, the tabs not shown.
    I tryed it with only 1 tab and multiple, but it's the same.
    Anyone have an answer or it's allready a bug?
    Thank you.

    App tabs are only restored if you restore the session. [[Options window - General panel#w_startup]] 'Show my windows and tabs from last time' will always restore your tabs and app tabs.
    Using the history menu item and then 'Restore previous session' or set about:home as your home page and it will have a button to restore your previous session. Will also work.

  • Changes not seen in Basic pay infotype

    Hi Experts,
    I have faced the following issue:
    Dearness Allowance component that was set as Rs. 500 for a particular period (say Mar2008 to Apr 2010) was changed to Rs.750 in between the period (say Aug 2009).
    The set of employees need to be assigned to the updated amount. Running the program 'pc00_m40_dab' for the same says, "Has run successfully". But I don't see the updated result in IT008.
    Not sure if there are related settings in 0008. Pls provide your inputs.
    Regards,
    Ash

    DA CONCEPTS
    below steps may be useful to u
    Prerequesties for VDA Calculation
    1.Allowance grouping should exsist
    2.VDA component should be maintained for the vda applicable employee
    Major Table to touch the configuration (U can access table using sm30)
    1.V_T7IND1-ext descrption for index code
    2.V_T7IND3-Index code for various consumer price indices-Give the date (Current date) on
    every change in VDA you have to mention the data of effect here only.
    3.V_T7IND5-Basic slab id for Dearness allowance determination
    4.V_T7IND7-Pay scale grouping for allowances-Important step give ur allowance grouping and also
    Give the std wage type Fixed da -MD10 and Vda -MD20
    5.V_T7IND9-Reference code for various consumer price indices
    after all the above things in backend
    Give the T CODE :PC00_M40_DAB
    In the screen give the effective date given in the V_7IND3 TABLE and execute
    Those persons having md10 component in infotype 8 is being processed and u can see the o/p
    use sm35
    and run the batch input session which will upload in infotype 8
    BASIS SLAB BASIS is another techinic which u can update vda according to the basic salary
    of employee
    say for example those u are drawing <3000 500 vda
    3000 750 vda
    it can be given in squence number in v_t7ind5 table and the same can be linked to V_T7IND7
    table.
    Hope i reached u
    with regards
    partha
    keep sharing and learning

  • Why my tracks are not shown in Album view and Artist view, only Album Artworks are shown???

    Dear,
    I have not have this problem in the previous version of iTune. As soon as i upgraded it to iTunes 11, it happens.
    The problem in here is all my songs, tracks are still here, i can see all of them in "songs view". However, when i change the view to Album View, and click into the Album artwork, there is no track there. When i double click into the Album Artwork, the first song of the album will be played normally.
    Same story to the Artist View. Only the Album Artworks are shown and the rest is completely blank.
    I have absolutely no idea what is going on here and obviously i am not satisfy with this new version.
    Is there any way for me to fix this problem? Please help!
    Otherwise i will need to use other software for music playing.
    Regard,

    Refer this article
    The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
    http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • TS3972 How can I access the files(movies,music,etc) in my Apple Time Capsule(4th Gen) from my Apple TV(3rd Gen). This is very frustrating Apple has not provided a basic feature, and me buying the Time Capsule and Apple TV is an complete waste of bucks.

    I have an Apple TV (3rd Gen) and Apple Time Capsule (4th Gen). How can I access Movies and Music stored in the Time Capsule from Apple TV. This is very  n't give frustrating that Apple doesn't give their customers with an straight forward access to their customers in between their own products. Iam repenting that buying these products is completely waste of bucks. Appreciate your help...

    Welcome to Apple Support Communities
    The Time Capsule is clearly announced as a router with a hard drive to make backups, not to store anything and share it with your Apple TV.
    To access to movies and music from the Time Capsule, note that the Apple TV can only access to them if they are stored in your iTunes library, so you will have to put your movies and music into iTunes to access to them, and then, put your iTunes library on the Time Capsule in order to access to your data from there

  • Cisc ISE 1.1.3: PS not shown in Admin Node and no live authentications

    Dear folks,
    I have a distributed deployment of ISE. 4 Applicances, two are Admin and Monitoring while remaining two are Policy Server.
    Policy Nodes are showing down... But, actualy they are running and working fine. Clients are being authenticated.
    I checked the services "show application status ise", all are fine.
    Any thoughts...
    Thanks,
    Regards,
    Mubasher Sultan

    I believe that the following link would help you with your query.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html#wp1035890
    Moreover, I feel that there could be various reasons for this kind of issue, as in:
    1. Incorrect System time and NTP server settings
    2. The server certificate operations have not been performed directly on each individual node
    3. The switch is not transmitting RADIUS accounting packets (attributes) to the RADIUS server.
    The above three maybe a reason, please check and revert if they actually are the reason for PSN to be down.

  • An old 3.5 version is installed not shown in "add Reamove" and won't be updated. How do I

    When I start FF I get a warning it is out of date and not secure. I have tried many "updates" but they do not replace the "operating" version. Via "Help" it shows me running V7.
    I have been onto the forum and was told:
    First off, the browser you used to post here says it is Firefox 3.5, not Firefox 5.0, you need to fix that.
    Your UserAgent string in Firefox is messed up by a FBSMTWB add-on - probably related to Facebook-something
    http://en.wikipedia.org/wiki/User_Agent
    type about:config in the URL bar and hit Enter
    If you see the warning, you can confirm that you want to access that page.
    Filter = general.useragent.
    Right-click the preferences that are bold, one line at a time, and select Reset.
    Then restart Firefox
    I looked at this but there are literally many hundreds of lines. With my eyesight, trying to get it right is likely to cause more problems. I have spent hours trying to sort this. Please help, I HATE IE. Thanks Ian

    FBSMTWB: Fast Browser Search, Make the Web Better
    See these pages and threads about Fast Browser Search (FBSMTWB in the user agent, Help > About).
    * http://help.fastbrowsersearch.com/
    * http://www.pccybertek.com/2009/05/remove-fast-browser-search
    See also:
    *https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    *http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

  • ATV not shown in devices list and firewall port 3689

    Having a nightmare with ATV. I have searched and found some help for some of the ATV problems I have had in other threads but seems that a couple of issues remain unsolved for most people.
    I have just purchased an ATV updated it to latest software; at first had the Samsung TV HDMI problem which can be solved by telling the TV that the connection is a PC (seems to alter settings for that HDMI port on Samsung TVs).
    All was well for 30 mins (kids got stuck in and started watching a film that was on my itunes library) then ATV lost connection to itunes media (still had network and internet for movie trailers). Tried various things reset ATV and quit itunes etc and got the firewall port 3689 error message in itunes.
    Tried a variety of stuff to fix the 3689 issue including: fixing permissions on imac HD; re-installing itunes, adding port forwarding to my BT homehub, telling itunes to share my library, adding firewall rule in OSX for itunes. Then reset and tried again, this time it worked for several hours started to sync etc. Then paused ATV in middle of film and imac went into sleep mode....after this ATV stopped seeing itunes media and imac went into circle of death.
    Since reboot of imac and reset of ATV nothing works; can't see ATV in itunes at all, tried all the normal reboot type stuff.
    Starting to get frustrated ATV seems flakey expected this to be normal apple experience but so far I feel like I do at work in Microsoft **** where nothing makes sense and I'm rebooting all the time ...any ideas ...BT homehub is suspect but seems odd that it worked for hours then stopped !!

    OK - rebooted BThomehub and forced ATV off network and back on and now itunes can see ATV and is syncing again.
    The common failure on both previous occasions was pausing a film for few minutes and imac going into sleep mode on second time.
    Anyone seen this before ... ?

  • Regd Wagetype and basic pay from 0008 thru internal table in smartform..

    Hi,
    I have a requirement where i have to display in my smartform the values for basic pay and different wagetypes from infotype 0008. In my smartform for 1 employee, only those values of wagetype and basic pay should print which are maintained in 0008. If no value then it should not display in my smartform at all (No even like 0.00).
    For this i have made an internal table in my smartform. Plesae advice how can i pass these vales in my smartform.
    Note* -  There is a filed in my custom inftyope 9003 - "Salary details as on (P9003-ZZDATE1). The value for basic pay and wagetype should be less than or equal to this date.

    Hello Preethi,
    From your thread ,what i understood is that you have created a able in the smartform.right?You can loop this table and put a condition for checking whether there any records in the internal table.
    Hope this will help you !!!
    Reward points if it found useful!!
    Regards,
    Manoj.

  • Answer and Title for 'Other' field in a single choice field is not shown

    The answer for 'Other' in a single choice field is not shown in email answer and 'Other' title not shown in FormsCentral answer.
    I can send examples if that helps.

    Hi Cathy-1961,
    Thanks for using FormsCentral.
    We are looking into the issues that you reported.  I'll let you know when we address the issues.
    Kind Regards,
    Perry

  • Thread is not showing in the forum and in my activity

    Hi everybody,
    I've asked a question about TFS in TFS-General forum 20 minutes ago. This is not shown in my activity and not shown in the forum when I view the forum. Here is this thread
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/e99b89d3-fe7c-4d87-843d-af21b1f4e609/deleted-item-how-can-it-be-deleted-for-everyone?forum=tfsgeneral
    Do you know what is going on?
    Thanks in advance.
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

    This is similar problem, but was already discussed here separately. I also got that situation when my answer was not in my activity or points.
    This is the thread with the missing Points discussion
    https://social.microsoft.com/Forums/en-US/3a645416-f2cc-49bc-bd97-701f06377efb/not-getting-points-for-the-marked-answers?forum=reportabug
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

  • OSA Appraisal: custom substatus not shown in phap_catalog_pa

    Hi, gurus,
    why there is only one substatus shown on the status flow tab of a category and template? i defined sever custom substatus of main status 'in process', but they are not shown at all.
    thanks and best regards
    Jun

    Hi,
    I  recently worked the appraisal forms. Most of the appraisal templates are created and configured in the SPRO. Or OOAM or PHAP_BASIC transaction code.
    as per my understanding , the solution for your question is : you can restrict Lines Reserved for Note is input field (F4 field) there you can select numbers within 1 - 9.
    please let me know if you have any issues / concerns.
    Thanks,
    Ramana

  • OC4J not shown in enterprise manager... but in opmn yes !!!

    hello friends.
    info:
    Server: Sun Solaris SPARC 64
    application server: 10G 10.1.2.0.2
    I have a problem with OC4J on our production server, it is not shown on enterprise manager, and the applications inside it working well, but now we need to upgrade the version of the application, I cant find that OC4J in my enterprise manager.
    opmnctl status: show it and it is alive.
    I maybe able to undeploy/deploy via dcmctl, but really need this to work thriough enterprise manager
    Many thanx in advance for your advices
    A.Salloum

    Hello all,
    Many thanks for your replies,
    I found the solution finally,
    I opened the file $ORACLE_HOME/sysman/emd/targets.xml, all the OC4Js were there except the one I wanted, I added it to targets.xml, and every thing is good now
    Regards,
    A.Salloum

Maybe you are looking for

  • I've bought Lion USB Thumb Drive, how to make a backup of it?

    hi i've bought the Lion USB Thumb Drive because my internet connection is super super slow. now, the Lion USB Thumb Drirve arrived is super small and fragile because it's a Mini-B type USB connector, with all the metal exposed. So I try to make a bac

  • Where to buy in Berlin?

    I'm currently in Berlin for a couple of days and I'm trying to find out where I can buy here. Can anyone recommend a place to buy? Cheers

  • How to retrive one table records into another table by multiple records

    how to retrive table X records into another table Y by multiple records (means at once i want display 10 records) in form 6i . when i am written cursor it is ftching only one record.But i want to display all records at once. Declare Cursor cur_name i

  • Is there any known issue about mutex lock used in JNI on Solaris 10?

    Dear Oracle, I'm facing a strange behavior when running a JNI application that use the mutex lock. The application hanged after running for a while on one of our Solaris 10 machines. After investigating the stack trace of the application, it shows th

  • Lost all photos and apps on update

    I have a 3GS and have just done the ISO5 update and have now lost all my photos and applications.  Prior to doing the update I backed up but during the update the phone synched again to the new settings, extremely upset.  Any help would be appreciate