VDBench failed to delete the control file

Seems like there were several file in the directory which did not belong to VDbench, but usually it fails when it tries to delete the directory it self, and not the control-file
Any ideas why this happened?
Thanks !
06:38:13.003 Starting RD=format_for_rd1
06:38:13.045 06:38:13.045 task_run_all(): 369 tasks
06:38:13.087 06:38:13.087 readDirsAndDelete(): Invalid file name found and not deleted: /mnt/sys--6/rickfs002 kuku
06:38:13.088 06:38:13.088 readDirsAndDelete(): Invalid file name found and not deleted: /mnt/sys--6/rickfs002 kuku
06:38:13.106 06:38:13.106 Message to master: anchor=/mnt/sys--2/clone001_snap001_rickfs003 deleted 12 directories; 631/sec
06:38:13.110 06:38:13.109 readDirsAndDelete(): Invalid file name found and not deleted: /mnt/sys--4/rickfs002 kuku
06:38:13.110 06:38:13.109 readDirsAndDelete(): Invalid file name found and not deleted: /mnt/sys--2/rickfs002 kuku
06:38:13.110 06:38:13.110 readDirsAndDelete(): Invalid file name found and not deleted: /mnt/sys--4/rickfs002 kuku
06:38:13.126 06:38:13.126 readDirsAndDelete(): Invalid file name found and not deleted: /mnt/sys--5/rickfs002 kuku
06:38:13.126 06:38:13.126
06:38:13.126 06:38:13.126 Unable to delete control file: /mnt/sys--4/clone001_snap001_rickfs004/vdb_control.file
06:38:13.127 06:38:13.126
06:38:13.127 java.lang.RuntimeException: Unable to delete control file: /mnt/sys--4/clone001_snap001_rickfs004/vdb_control.file
06:38:13.127 at Vdb.common.failure(common.java:308)
06:38:13.127 at Vdb.FileAnchor.deleteOldStuff(FileAnchor.java:805)
06:38:13.127 at Vdb.FileAnchor.cleanupOldFiles(FileAnchor.java:754)
06:38:13.128 at Vdb.FwgThread.run(FwgThread.java:137)

A few thoughts:
- you have an other Vdbench test running against the same FSD anchor, though if I am not mistaken, Unix allows you to delete a busy file.
- you created the control file with different user/authorization.
Henk.

Similar Messages

Delete the control file

Solaris 9 Oracle 9i
If one has got 2 sets of the control file eg control01, control02. can one delete one set if one needs space desperately and have a backup copy somewhere?
Thanx.

NPD wrote:
so this means it can be deleted if one wants toIf you could, it is highly not recommanded. You'd go to a not safely situation (imagine you lose the other one for some reason...). Furthermore, controflile are not Giga file size, I'm pretty sure you'll gain almost peanuts of space by removing a controlfile.
Nicolas.

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

Is it safe to delete the cache file folder from library

is it safe to delete the cache file folder from library ?

As I understand it Robo doesn't really 'do' third-party
source control. We use SourceGear Vault, but really only as a
repository for the files. We can't really work concurrently because
Robo needs exclusive access to the top level project files. But it
kind of works for us, because we're on opposite sides of the globe.
I see what you're saying on the 'local' versions of (say) the
cpd files conflicting. If anyone else has an informed view, I'm all
ears. We've set it up this way ourselves - I don't know of anyone
doing the same. If someone tells me this is a bad idea, I'm happy
to think again.
Cheers!

Need help in writing the control file for SQLLOADER

Is it possible to error out the Sqlloader in case the data fields in the data file for a row are more than the fields stated in the control file?
i.e. My data file is something like
aaa,bbb,cc
dd,eee
And my ctl file has just 2 columns in it. Is it possible to write a control file which will cause the Sqlloader to error out?
Thanks...

Nisha,
Again I posted test example in your other post but here is how can do that
CREATE TABLE mytest111 (
   col1 NUMBER,
   col2 NUMBER,
   col3 NUMBER
LOAD DATA
TRUNCATE INTO TABLE MYTEST111
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
col1 integer external,
col2 integer external
#mytest.dat
1,2,3
1,2
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Apr 10 11:40:39 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File:   mytest.ctl
Data File:      mytest.dat
Bad File:     mytest.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table USIUSER.MYTEST111, loaded from every logical record.
Insert option in effect for this table: TRUNCATE
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
COL1                                FIRST     *   , O(") CHARACTER
COL2                                 NEXT     *   , O(") CHARACTER
Table MYTEST111:
2 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array:                  33024 bytes(64 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:             2
Total logical records rejected:         0
Total logical records discarded:        0
Run began on Fri Apr 10 11:40:39 2009
Run ended on Fri Apr 10 11:40:40 2009
Elapsed time was:     00:00:00.99
CPU time was:         00:00:00.06
{code}
Regards

Restore from OSB. RMAN-06024: no backup or copy of the control file found

I backed up controlfile for standby on production server to OSB media:
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:15:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: EMGC (DBID=1838014073)
connected to recovery catalog database
RMAN>
RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
BACKUP CURRENT CONTROLFILE FOR STANDBY tag 'stb_ctl';
RELEASE CHANNEL ch1;
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: ch1
channel ch1: sid=1085 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 25-JAN-11
channel ch1: starting compressed full datafile backupset
channel ch1: specifying datafile(s) in backupset
including standby control file in backupset
channel ch1: starting piece 1 at 25-JAN-11
channel ch1: finished piece 1 at 25-JAN-11
piece handle=1em30ngu_1_1 tag=STB_CTL comment=API Version 2.0,MMS Version 10.3.0.2
channel ch1: backup set complete, elapsed time: 00:00:27
Finished backup at 25-JAN-11
released channel: ch1
RMAN> list backup of controlfile;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RMAN configuration parameters are successfully reset to default value
starting full resync of recovery catalog
full resync complete
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN>
On standby server I try to restore this control file but there is some trouble with restore... By the way I can delete that backup piece...
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:34:32 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: emgc (not mounted)
connected to recovery catalog database
RMAN> set DBID=1838014073;
executing command: SET DBID
database name is "EMGC" and DBID is 1838014073
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
crosscheck backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Crosschecked 1 objects
released channel: ch1
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
RESTORE CONTROLFILE FROM TAG 'STB_CTL';
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting restore at 25-JAN-11
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2011 15:35:20
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
delete noprompt backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1480 1479 1 1 AVAILABLE SBT_TAPE 1em30ngu_1_1
deleted backup piece
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Deleted 1 objects
released channel: ch1
RMAN>

You cannot specify a tag for a standby control file.
read here
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1002594
Edited by: Adigozalov Gurban on Jan 25, 2011 2:14 PM

Installation 11.5.10.2 failed with creation of control file.

The log information will be written to
"f:\oracle\alivisdb\9.2.0\appsutil\log\ALIVIS_dba\adcrdb_ALIVIS.txt"
ECHO is off.
ECHO is off.
Creating the control file for ALIVIS database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:14:25 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:15:08 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:15:19 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
adcrdb.cmd exiting with status 1
"Error returned while creating control files"
Dear All,
Tried installing 11.5.10.2 in winxp .. all the pre-requisties met and at the second stage ,Rapidwizard got stucked with the following error :
There was an error while running the command - f:\oracle\alivisdb\9.2.0\temp\ALIVIS_dba\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for ALIVIS instance
I've been assigned the user who has administrative privileges on the domain..
Help out guys..
Thanks
Yusuf

Please see Oracle Metalink Document Oracle Applications 11i Install Fails on Windows when Number of Processors is Greater than 12 Doc ID: Note:433203.1.
Some extracts of the metalink document,
To overcome this problem encountered on Windows, please execute the following steps:
1. Right click on "My Computer" > "Advanced" tab > Click on button "Environment variables".
2. Edit the value of NUMBER_OF_PROCESSORS from the value which is greater than 12(e.g. in this case 16) to 12. Apply the changes.
3. Reboot the machine to ensure that the environment variable NUMBER_OF_PROCESSORS is set to the corrected value i.e.12.
4. Clean the current install.
5. Check the value of NUMBER_OF_PROCESSORS on the command prompt before the rapidwiz is started :
echo %NUMBER_OF_PROCESSORS%
6. Run rapidwiz and finish database(of the Oracle Applications) installation.
7. Once the Oracle Applications is installed, the value of environment variable NUMBER_OF_PROCESSORS could be reset to its original value.
Hope it helps.
Adith

Database creation having a trace of the control file

Hi,
I want to move a database from one server let's say A to another server let's say B I have a copy of all the datafiles, redo logs, control files and init file of the database fron the server A. I have a trace of the control file.
I copied all these files on the server B in the location /dispecer_date/oradata, except init which is in ORACLE_HOME/dbs
I thought that the simplest method to recreate the database is from the backup of the control file writing in sql the command CREATE CONTROLFILE how is written in trace and replacing the word REUSE with the word SET in CREATE CONTROLFILE instruction.
I obtained an error:
ORA-01503: Create controlfile failed
ORA-01160: file is not a data file
ORA-01110: datafile: '/dispecer_date/oradata/system.dbf'
Why? The db_block_size parameter is 4096.
Thank you,
Mihaela

Here are the steps .....
sql > shutdown immediate ;
create identical dir structure on server b
copy all datafile,controlfile,redologfiles and pfile to target server ,And put them in same dir as of source.
now on taget server
sql > startup mountpfile = path of the pfile
sql > alter database opn
or
sql > alter database open resetlogs ;
this will do the trick, I don;t think recreating the controlfile is a good option hare , becuse you likly to loose some data if you stick on that one.
hare krishna
Alok

I can only backup the datafiles but not the control files and SPFiles

Hello, all,
I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
1. the ARCHIVELOG is on
2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
Accept the default of 31days
5. go to Schedul Backup
6. select customized from the backup Strategy drop-down menu. Select the Whole Database
7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
8. in the Setting page, select “Disk”
9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
10. just submit the job.
After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=268 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 11:20:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
What should I do? Any advice is highly appreciated!
Qian

the string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
I reset these values and tried to backup the whole database. The same error appeared. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=245 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 16:40:05
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
Any help is appreciated!
Qian
Message was edited by:
QianChen

Restore - filename for datafile is missing in the control file

I am practicing RMAN recovery procedures and I encountered a problem that I do not know how to solve.
1) I took a hot backup of my test database.
2) Create tablespace TS_DATA_TEMP
3) Deleted tablespace TS_DATA which had 2 datafiles
4) Created tablespace TS_DATA with 1 datafile
5) shutdown database
6) logged into RMAN in nomount
7) restore controlfile from autobackup;
8) alter database mount;
9) restore database;
RMAN> restore database;
Starting restore at 22-AUG-08
using channel ORA_DISK_1
the filename for datafile 5 is missing in the control file
skipping datafile 1; already restored to file /u02/oradata/EDM91/system01.dbf
skipping datafile 2; already restored to file /u02/oradata/EDM91/undotbs01.dbf
skipping datafile 6; already restored to file /u02/oradata/EDM91/index
skipping datafile 3; already restored to file /u02/oradata/EDM91/sysaux01.dbf
skipping datafile 7; already restored to file /u03/oradata/EDM91/TS_INDEX01.dbf
skipping datafile 9; already restored to file /u03/oradata/EDM91/TS_LOB01.dbf
skipping datafile 4; already restored to file /u02/oradata/EDM91/users01.dbf
restore not done; all files readonly, offline, or already restored
Finished restore at 22-AUG-08
10) tried to recover
Starting recover at 22-AUG-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/22/2008 15:04:22
RMAN-06094: datafile 5 must be restored
SQL> select name from v$datafile where file#=5;
NAME
/u04/oradata/EDM91/TS_DATA.dbf
12) alter database backup controlfile to trace
DATAFILE
'/u02/oradata/EDM91/system01.dbf',
'/u02/oradata/EDM91/undotbs01.dbf',
'/u02/oradata/EDM91/sysaux01.dbf',
'/u02/oradata/EDM91/users01.dbf',
'/u04/oradata/EDM91/TS_DATA.dbf',
'/u02/oradata/EDM91/index',
'/u03/oradata/EDM91/TS_INDEX01.dbf',
'/u04/oradata/EDM91/TS_DATA02.dbf',
'/u03/oradata/EDM91/TS_LOB01.dbf'
CHARACTER SET UTF8
So i'm not sure what the problem is. Datafile TS_DATA.dbf is located in the control file but i'm getting the error: the filename for datafile 5 is missing in the control file.
Suggestions on what's wrong with the control file?

I found my mistake; a newbie error.
I did not know I needed to include in my restore command the 'until' option when doing incomplete recovery. I only included the 'until' option in the recover command:
original command
restore database;
recover database until sequence =123;
should be
restore database until sequence = 123;
recover database until sequence =123;
I usually run the command using a RUN block with a SET UNTIL SEQUENCE but this case I used the single commands separately.
RUN
+{+
SET UNTIL sequence 123;
RESTORE DATABASE;
RECOVER DATABASE;
+}+

I have this following problem in Adobe Premiere Elements 11: Error of export: You don't have permissions to create or delete the output file.

Hey guys,
I have this following problem:
When i export my movie to my desktop from premiere elements 11 it fails and says "Error of export: You are not permitted to create or delete the output file."
This is the first time i had this problem.
I have no ideas to solve this problem ... I don't found it on this page neither in the whole web -.-
I look forward to get requests

S
QuickTime is a requirement for Premiere Elements (any version). Please download and install it so that we can continue this troubleshooting. Among other things, without QuickTime installed, you will not have QuickTime presets in Publish+Share and will not have available to you codecs supplied by that player.
Please right click the Premiere Elements 11 desktop icon and apply Run As Administrator. Please review computer permissions..
In the meanwhile, please reply to all the questions, including
What is the description for your export choice and does it make a difference if your Export Save In location is the desktop or to Video Folder in Documents?
What is a description of your computer resources?
Please consider and supply details need to help us help you.
We want you to succeed.
Thank you.
ATR

RMAN-06024: no backup or copy of the control file found to restore

I am cloning a new database using a full backup from previous nightly rman backup using a standby database utilizing catalog. When I run the duplicate command, I get
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/27/2011 15:04:05
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
But the backup of controlfile does exists in the right place. What am I missing?

958210 wrote:
i was trying to clone a database to a remote machine, but it is giving me the following error
'RMAN-06024: no backup or copy of the control file found to restore
ORA-19505: failed to identify file "/u01/app/oracle/product/11.2.0/dbs/c-1617115651-20120912-02"
even though i can list the backup of the control file in the source machine.
thank you
'How do I ask a question on the forums?
SQL and PL/SQL FAQ
Since we don't know what you did, so we can't know what you did wrong

Backup failed while copying the redo files due to previous errors

Backup failed while copying the redo files due to previous errors. DATA file backup is successfull. Please suggest what measures we can take to avoid this.. This is a daily online backup.
logs
BR0001I ******************************____________________
BR0202I Saving /oracle/ECQ/sapdata2/sr3700_7/sr3700.data7
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data7 ...
#FILE..... /oracle/ECQ/sapdata2/sr3700_7/sr3700.data7
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data7 #1/29
BR0280I BRBACKUP time stamp: 2010-11-03 20.01.36
BR0063I 29 of 45 files processed - 92344.227 MB of 147448.352 MB done
BR0204I Percentage done: 62.63%, estimated end time: 20:20
BR0001I *******************************___________________
BR0202I Saving /oracle/ECQ/sapdata2/sr3700_8/sr3700.data8
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data8 ...
#FILE..... /oracle/ECQ/sapdata2/sr3700_8/sr3700.data8
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data8 #1/30
BR0280I BRBACKUP time stamp: 2010-11-03 20.03.34
BR0063I 30 of 45 files processed - 98044.234 MB of 147448.352 MB done
BR0204I Percentage done: 66.49%, estimated end time: 20:20
BR0001I *********************************_________________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_10/sr3700.data10
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data10 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_10/sr3700.data10
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data10 #1/31
BR0280I BRBACKUP time stamp: 2010-11-03 20.04.51
BR0063I 31 of 45 files processed - 102064.242 MB of 147448.352 MB done
BR0204I Percentage done: 69.22%, estimated end time: 20:20
BR0001I ***********************************_______________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_11/sr3700.data11
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data11 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_11/sr3700.data11
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data11 #1/32
BR0280I BRBACKUP time stamp: 2010-11-03 20.06.09
BR0063I 32 of 45 files processed - 106024.250 MB of 147448.352 MB done
BR0204I Percentage done: 71.91%, estimated end time: 20:20
BR0001I ************************************______________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_12/sr3700.data12
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data12 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_12/sr3700.data12
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data12 #1/33
BR0280I BRBACKUP time stamp: 2010-11-03 20.07.27
BR0063I 33 of 45 files processed - 110024.258 MB of 147448.352 MB done
BR0204I Percentage done: 74.62%, estimated end time: 20:20
BR0001I *************************************_____________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_9/sr3700.data9
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data9 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_9/sr3700.data9
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data9 #1/34
BR0280I BRBACKUP time stamp: 2010-11-03 20.08.45
BR0063I 34 of 45 files processed - 114124.266 MB of 147448.352 MB done
BR0204I Percentage done: 77.40%, estimated end time: 20:20
BR0001I ***************************************___________
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_13/sr3700.data13
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data13 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_13/sr3700.data13
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data13 #1/35
BR0280I BRBACKUP time stamp: 2010-11-03 20.10.02
BR0063I 35 of 45 files processed - 118284.273 MB of 147448.352 MB done
BR0204I Percentage done: 80.22%, estimated end time: 20:19
BR0001I ****************************************__________
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_14/sr3700.data14
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data14 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_14/sr3700.data14
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data14 #1/36
BR0280I BRBACKUP time stamp: 2010-11-03 20.11.30
BR0063I 36 of 45 files processed - 122764.281 MB of 147448.352 MB done
BR0204I Percentage done: 83.26%, estimated end time: 20:19
BR0001I ******************************************________
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_15/sr3700.data15
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data15 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_15/sr3700.data15
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data15 #1/37
BR0280I BRBACKUP time stamp: 2010-11-03 20.12.58
BR0063I 37 of 45 files processed - 127124.289 MB of 147448.352 MB done
BR0204I Percentage done: 86.22%, estimated end time: 20:19
BR0001I *******************************************_______
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_16/sr3700.data16
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data16 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_16/sr3700.data16
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data16 #1/38
BR0280I BRBACKUP time stamp: 2010-11-03 20.14.15
BR0063I 38 of 45 files processed - 131284.297 MB of 147448.352 MB done
BR0204I Percentage done: 89.04%, estimated end time: 20:19
BR0001I *********************************************_____
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_17/sr3700.data17
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data17 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_17/sr3700.data17
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data17 #1/39
BR0280I BRBACKUP time stamp: 2010-11-03 20.15.23
BR0063I 39 of 45 files processed - 135380.305 MB of 147448.352 MB done
BR0204I Percentage done: 91.82%, estimated end time: 20:19
BR0001I **********************************************____
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_18/sr3700.data18
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data18 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_18/sr3700.data18
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data18 #1/40
BR0280I BRBACKUP time stamp: 2010-11-03 20.15.40
BR0063I 40 of 45 files processed - 136404.312 MB of 147448.352 MB done
BR0204I Percentage done: 92.51%, estimated end time: 20:19
BR0001I **********************************************____
BR0202I Saving /oracle/ECQ/sapdata1/sr3usr_1/sr3usr.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3usr.data1 ...
#FILE..... /oracle/ECQ/sapdata1/sr3usr_1/sr3usr.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3usr.data1 #1/41
BR0280I BRBACKUP time stamp: 2010-11-03 20.15.44
BR0063I 41 of 45 files processed - 136424.320 MB of 147448.352 MB done
BR0204I Percentage done: 92.52%, estimated end time: 20:19
BR0001I **********************************************____
BR0202I Saving /oracle/ECQ/sapdata3/undo_1/undo.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/undo.data1 ...
#FILE..... /oracle/ECQ/sapdata3/undo_1/undo.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/undo.data1 #1/42
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.02
BR0063I 42 of 45 files processed - 145284.328 MB of 147448.352 MB done
BR0204I Percentage done: 98.53%, estimated end time: 20:18
BR0001I *************************************************_
BR0202I Saving /oracle/ECQ/sapdata1/sysaux_1/sysaux.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sysaux.data1 ...
#FILE..... /oracle/ECQ/sapdata1/sysaux_1/sysaux.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sysaux.data1 #1/43
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.11
BR0063I 43 of 45 files processed - 145564.336 MB of 147448.352 MB done
BR0204I Percentage done: 98.72%, estimated end time: 20:18
BR0001I *************************************************_
BR0202I Saving /oracle/ECQ/sapdata1/system_1/system.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/system.data1 ...
#FILE..... /oracle/ECQ/sapdata1/system_1/system.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/system.data1 #1/44
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.39
BR0063I 44 of 45 files processed - 146424.344 MB of 147448.352 MB done
BR0204I Percentage done: 99.31%, estimated end time: 20:18
BR0001I **************************************************
BR0202I Saving /oracle/ECQ/sapdata1/system_2/system.data2
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/system.data2 ...
#FILE..... /oracle/ECQ/sapdata1/system_2/system.data2
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/system.data2 #1/45
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.56
BR0063I 45 of 45 files processed - 147448.352 MB of 147448.352 MB done
BR0204I Percentage done: 100.00%, estimated end time: 20:18
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.00
BR0340I Switching to next online redo log file for database instance ECQ ...
BR0321I Switch to next online redo log file for database instance ECQ successful
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0319I Control file copy created: /oracle/ECQ/sapbackup/cntrlECQ.dbf 12894208
BR0085I 1 offline redo log file found for backup, size 27.933 MB
BR0202I Saving /oracle/ECQ/sapbackup/cntrlECQ.dbf
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/cntrlECQ.dbf ...
#FILE..... /oracle/ECQ/sapbackup/cntrlECQ.dbf
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/cntrlECQ.dbf #1/46
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0063I 1 of 2 files processed - 12.297 MB of 40.230 MB done
BR0204I Percentage done: 30.57%, estimated end time: 20:19
BR0001I ***************___________________________________
BR0202I Saving /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf ...
BR0278E Command output of 'LANG=C cp /oracle/ECQ/oraarch/ECQarch1_9046_685558507 .dbf /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf':
cp: /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf: Invalid argument
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0279E Return code from 'LANG=C cp /oracle/ECQ/oraarch/ECQarch1_9046_685558507. dbf /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf': 1
BR0222E Copying /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf to/from /oracle/ ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf failed due to previous errors
BR0056I End of database backup: beemiuvh.and 2010-11-03 20.19.04
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0054I BRBACKUP terminated with errors
srva0004:oraecq 59>
Thanks
Preeti
Edited by: Preeti Sharma on Nov 4, 2010 1:54 PM

BR0202I Saving /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf ...
BR0278E Command output of 'LANG=C cp /oracle/ECQ/oraarch/ECQarch1_9046_685558507 .dbf /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf': cp: /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf: Invalid argument
see above error.
Whats your setting for disk copy command in your init<SID>.sap
I think you are using cp command
>disk_copy_cmd copy

I want to delete temporary internet files. Notice I did not say clear the cache. That does not work! How can I delete the temp files? Why did you take that feature away? VERY frustrating that you would do that!

I search for how to delete temp int files and keep coming up with the "clear cache" crap. That is not what I searched for. Clear cache does NOT delete the temp files. Why would you take that feature away??

The Windows temporary internet files folder isn't used directly by Firefox. Firefox uses its own cache folder and you can see its current usage on the about:cache page via the location bar.
If anything does show up in the temporary internet files folder then it is likely caused by using MS plugins like the Windows Media Player or Silverlight. You need to clear that folder via IE or the control panel (internet settings).

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

VDBench failed to delete the control file

Similar Messages

Maybe you are looking for