VDI 3.2 All clones seem to be getting same IP address

OK, I'm probably going to embarrass myself once again, but I have to ask since it seems incorrect.
I notice in the cacao log that during the cloning process, all my clones seem to return the same IP address:
FINE: thr#5284 Got IP address '10.0.2.15' for desktop [254]winxp_dom1001 (f1568a0b-8945-4a3d-9332-0b843951f9f8)
FINE: thr#5491 Got IP address '10.0.2.15' for desktop [256]winxp_dom1002 (0b102a72-fbf5-4de0-ad20-255b5d966161)
FINE: thr#5492 Got IP address '10.0.2.15' for desktop [258]winxp_dom1003 (01a33908-5caa-4340-aa47-52306c16be75)
Is this normal or should I have set a range of addresses somewhere? Saw nothing on the wiki about it. I'm using the NAT'd network option.
Art

That's normal and expected. You don't have to be embarrassed, you are just confusing your experience with NAT on your home router or VMWare and all the machines behind it.
The VBox NAT is a router, or perhaps better stated, each NIC in a VM running under NAT has "it's own router", thus it's own internal DHCP server. Each router has unique public side (IP of Desktop Provider:port) that you connect to, and a private side with a DHCP Server that will always be on a 10.0.X.0 network, which is why all NAT'd VM's with one NIC get 10.0.2.15.
Since each NIC has it's own router, to avoid duplicate names on the network, any machine with second NIC, that will get a different public side address (IP of Desktop Provider:port) and a private side 10.0.3.15 address.
Learn more about Vbox networking in Chapter 6 and about the VBox DHCP in chapter 9 of the user guide.

Similar Messages

  • I'm in several linkedin groups, all which send mail using the same email address. How can I change the Name of the sender to reflect individual groups?

    The email address used to send emails is "[email protected]" But I'm in at least five different groups. How can I set up Thunderbird to differentiate between them?

    you can't really, but you might be able to filter them by message content into folders for each, or color them with tags

  • Can't connect to internet - but all settings seem correct!

    My G5 can't connect to the internet (but my Mac Pro can). I've just had an engineer out because I thought it was the cable connection (I connect via a cable modem). Yet I can ping a host via the Network Utility when I boot from the Tiger DVD - so there doesn't seem to be a hardware problem. But from my user account I can't access the internet.
    All the Network settings look fine - no firewall, nothing looks out of place. I'm getting an IP address served by the modem, and Diagnostics even says it can connect to the ISP server just no dialog with the internet!!! It's bizzare. Tried ping from Terminal too, no go. I've repaired permissions, still no go. Only thing I haven't done is zap the PRAM.
    This is a direct connection to the modem via ethernet (I usually use a router but it's out of the equation now)
    There's something blocking the connection but I can't find out what.
    This happened after I swapped the network round so that my new Mac Pro would be the main internet machine (sharing the connection with other machines on my network). Previously I could connect to the G5 via the Mac Pro but that's no longer working, or rather it's REALLLLLY slow, it will eventually connect.
    The only thing I've done out of the ordinary is put the drive from the G5 inside the Mac Pro to transfer some of my files. I had used BatChmod to change permissions on some User folders so I could copy them, but I've repaired the premissions since.
    please HELP!!!!!!

    I solved my problem by installing a fresh system on a different drive and starting from that. My Mac can now connect - but starting up into the other system causes the same no-internet problem so I can only assume it is some OS corruption that caused it.
    Hope that helps someone.

  • My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    Most likely, water damage.
    You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
    If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
    Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

  • HT1660 I lost my entire music library when my hard drive crashed 2 wks ago. It's all on my iPod, though. I just cannot figure out how to download my iPod music BACK into my iTunes library. All they seems to address is Library - iPod.  I'm not an iT geek..

    Hi, I lost my entire music library when my hard drive crashed 2 wks ago. It's all on my iPod, though..but the songlist appears gray.  I just cannot figure out how to download my iPod music list BACK into my iTunes library. All they seems to address is Library -> iPod transfers.  I'm not an iT geek.. Help meeee!

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a somethi

    I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a something

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I was trying to upgrade and all that seems to happen is I get a verification screen after I click on the "upgrade now" button?

    I was trying to upgrade and all that seems to happen is I get a verification screen after I click on the "upgrade now" button? I've tried it a couple of times but it seems to be in a constant loop.

    Hi John,
    I'm sorry that you're having trouble purchasing your upgrade. What are you trying to upgrade to? I've checked your account, and didn't see any stalled orders.
    Have you tried logging in to Adobe.com from a different web browser?
    Best,
    Sara

  • My Time Capsule has quit backing up - now spends all it's time "preparing".  I've tried the Apple suggestion of a reset which does not help.  All indicators seems to be OK.  Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe.  Any ideas?

    My Time Capsule has quit backing up - now spends all it's time "preparing".  I've tried the Apple suggestion of a reset which does not help.  All indicators seems to be OK.  Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe.  Any ideas?

    Hello,
    Thanks for your message, I have attempted to repait the permissions as tou suggested.  The first time this produced a long list of exceptions and took quite a while, however although it said "Permissions repair Complete" when I ran it again there were still about 20 exceptions, I have repeated the procedure and this is unchanged.  The Time Capsule now does not spend hours "Preparing", but the backup attempt fails after a few minutes with the error message "The backup volume could not be mounted."  Any further ideas would be appreciated.   When I use Disk Utility I can't see the Time Capsule volume, if I could I'd be tempted to re-format it and start from scratch. 

  • Why do only some photos appear in iCloud folder on my PC and not all taken on iPhone appear on iPad either? All settings seem correct and new photos now seem to be appearing on all devices, but not all older or recent photos

    Why do only some photos appear in iCloud folder on my PC and not all taken on iPhone appear on iPad either? All settings seem correct and new photos now seem to be appearing on all devices, but not all older or recent photos, even if taken at same time. All advice greatly appreciated.

    First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
    Matt

  • When i open my itunes store, it says secure link to itunes failed and it doesnt load up, what seems to be the problem here? appreciate all the help i can get, thanks! :)

    When i open my itunes store, it says secure link to itunes failed and it doesnt load up, what seems to be the problem here? appreciate all the help i can get, thanks!

    Yes, provided all the media is inside the iTunes Media folder, which is in turn inside the main iTunes folder (which is the standard arrangement) you should be able to move the iTunes folder from <User's Music> to any other path and shift-start-Tunes (option-start-iTunes on a Mac) to reconnect to it.
    If the media folder has split out to another drive in the past, or media is stored outside of the iTunes Media folder, then things get a bit more complicated. I can go into details should it be necessary.
    tt2

  • I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on.

    I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on. These are 20 frame dissolves.

    FCP User Manual, page 798.
    You can condense multiple clips that are stacked above each other into a nest. The nest appears as a single clip in the Timeline. If you need to modify the individual clips inside after you have created the nest, it can be expanded again by double clicking it.

  • What is the best iPhone 4/4s extended battery case? I've been reading reviews for a bunch of them, but they all seem to say the same thing.

    What is the best iPhone 4/4s extended battery case? I've been reading reviews for a bunch of them, but they all seem to say the same thing.

    Personally most of my co-workers are using the Mophie case. They are great quality but can be pretty pricey. All of my fellow co-workers have been using this case to help with the upsetting battery drain that comes with ios5. I have seen people drop the the iPhone with this case on and seems to be a good sturdy case with an extra 9 hour battery life. Anyway's here is their web site if you want to look into these cases further.
    http://www.mophie.com/battery-cases-s/51.htm

  • HT1689 I have 0.44$ in my account, and I was trying to change the apple store, but I have to use the credit... However, all applications seem to be 0.99$ (the least) how can I get rid of this 0.44$ so I can change the store?

    I have 0.44$ in my account, and I was trying to change the apple store, but I have to use the credit... However, all applications seem to be 0.99$ (the least) how can I get rid of this 0.44$ so I can change the store?

    Click here and request assistance.
    (90740)

  • InDesign data merge isn't pulling in all fields, seems to be confusing some fields

    Hi there - I'm trying to do a data merge in CS6 for about 450 address labels. The labels are 10-up so I made a .csv file with 10 equal sets of colums (named Firstname1, Firstname2, Firstname3, etc.) and merged those into my label document. I've done this before plenty of times with no problem, but for some reason this time the merge seems to be getting thrown off by something. I can see multiple places in which the merge will stop after a certain field - usually the address - then there will be a bunch of blank labels, then on the next page the address from the last label will start up again. I've attached a screen shot of what it looks like when the address breaks like this. In the top image, Troy Christian's merge breaks after the street again. Then a few blank labels follow, then Troy's city, state, and zip appear at the beginning of the next page. Then it continues on with the next address block (inserting commas along the way for some reason), then it breaks again.
    I've scoured both the merge fields and the Excel file - nothing seems out of the ordinary - resaved the Excel over and over as both .csv's and .txt's, and can't get it to fix. Any ideas here?? Please let me know if there's any further info I can provide.
    Thank you!

    We didn't end up even looking at it in a text editor, although that probably would have been easier - we just saw where the errors were occurring in the merge and looked carefully at those cells in the .csv file, and then deleted line breaks, commas, and weird characters. Worked like a dream.
    Thank you so much for your help on this!
    e

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

Maybe you are looking for

  • Getting ERROR in SDM while deploying

    Hi All, I have downloaded CRM Business Package for 4.0 file BPCRM40602_3-10002661.ZIP from SDN. I am trying to delpoy this using SDM. I rename the file to BPCRM40602_3-10002661.sca and deployed but i am getting ERROR saying Manifest attributes are mi

  • Trace file issue...

    Hi All, When I start the database it contineuos write the trace file without any reason.. These are more information on this -rw-r----- 1 oracle dba 95433 Oct 18 12:49 owsidev_reco_1273966.trc -rw-r--r-- 1 oracle dba 302216 Oct 18 12:49 alert_OWSIDEV

  • Memory Leak when downloading?

    I recently upgraded to Windows 7, and increased my RAM from 2 to 3gb, whilst attempting to download a movie i can start with anywhere from using only 600mb of memory and start the download, leave it running and have the task manager showing me the me

  • OEM 12c: How to delete a Weblogic deployment/domain/etc..?

    Hi all, I've been trying to remove an agent and all it's Weblogic related targets, but without success... I select the target, click on the option to remove it, confirm it clicking on the OK button, get back the message "Target deleted successfully",

  • Update wont complete

    I have tried Downloading the latest iTunes version many times. When I do, it runs for a few minutes and then this pops up "Errors occurred while installing the updates. If the problem persists, choose Tools>Download Only and try installing manually.