VDI - RemoteApp does not start in "Virtual machine-based desktop deployment" environment
Hello dear community,
I would like to familiarize myself to the subject of desktop virtualization and have built up a test environment for this purpose. Most went smoothly, but now I'm trying for days to figure out, why the deployed RemoteApp programs in my test environment not
start. Unfortunately posts here and in other blogs were not helpful. I hope you can point me to the right direction. :)
My environment
Server 1
Windows Server 2012 R2 Std with the roles
AD DS,
DNS,
DHCP
Server 2
Windows Server 2012 R2 Std with the roles
Hyper-V,
Remote Desktop Services (Connection Broker, Virtualization Host, Web Access),
IIS
VMs
Windows 8.1
RD Client 1
Laptop with Windows 7 and Internet Explorer 9, Firefox 28, RemoteApp and Desktop Connections
RD client 2
iPad with Microsoft Remote Desktop App
Setting up the environment
The installation of the environment I made as mentioned in the following blog post. http://blog.itvce.com/?p=1569 But with only two physical servers.
What does work?
Prepared with SysPrep and "cloned" Windows 8.1 VMs created in the collections of virtual desktops are accessible via WebAccess (RDWeb) using IE, FF, Windows Start menu and also from the iPad as a complete desktop for authorized users/groups. The VMs
wake up in Hyper- V from the saved state and roll back to it after the user logs off. So far so good.
What does not work?
Now to what does not work. One collection of virtual desktops I have reserved for the publication of RemoteApp programs. So this new collection - like the above - was created. The VMs were built and successfully registered in AD. Then I used "publish RemoteApp
Programs" wizard in the collection. The available programs were successfully read from the VM. WordPad, Calc and Paint I used for the test. The programs/apps will then appear in RDWeb.
In RDWeb I now click on the Calculator, the warning described in many blogs appears that resources are passed through and then that the certificate could not be verified. Although I have already added the certificate to the trusted root CA in the user and the
computer area, I acknowledge that I would like to connect despite the certificate error with "Yes".
After about 20 seconds the "Connect to ..." window disappears and that it was. In Hyper-V Manager the corresponding VM does not move even if it's running. If the VM was not running and in saved state, it is at least started. But the Calculator will
still not start.
Can anyone give me a proper hint what to do, which Bing, Google and Technet did not have?
Thank you in advance!
Kay
PS: Since I am from Germany, I have asked the question first in the German forum. Unfortunately, without success.
Hi Kay,
Thank you for contacting Microsoft.
From your description, I learnt that the issue you are experiencing is that you want to eliminate the certificate warning when launching the Remote App applications. Please let me know if I misunderstand your purpose.
Firstly, please let me know what certificate you are using. Then please export and import the certificate on the RDSH server. We need to manage the certificates. Please refer to
the steps below.
1. Open the Collections which you want to manage, click
Edit Deployment Properties.
2. On the Certificates page, select
Select existing certificate.
3. When the
Select Existing Certificate page appear, please select Choose a different certificate, locate to the right exported certificate path, and type the correct password, and
select Allow the certificate to be added to the Trusted Root Certification Authorities certificate store on the destination computers.
4. Repeat steps 2 and 3 to finish the certificate configuration, here we can use the same certificate.
If anything unclear, please feel free to let me know.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Similar Messages
-
I am importing alerts into a 3rd party application from SCOM 2012 R2 using the powershell code below. SCOM returns me MonitoringAlert objects, I need to map the alerts to the virtual machines in SCVMM. However, the MonitoringAlert.MonitoringObjectId value
does not match the ID (guid) of the virtual machines in SCVMM 2012 R2. Surely these IDs should correlate, any ideas anyone?
$mg = Get-SCOMManagementGroup -ComputerName "SCOMGR.manageiq.com"
$criteria = New-Object Microsoft.EnterpriseManagement.Monitoring.MonitoringAlertCriteria("Description LIKE '%Heartbeat%' AND ResolutionState == 0")
$alerts = $mg.OperationalData.GetMonitoringAlerts($criteria, (Get-Date).AddDays(-10))
many thanks in advance
BHi,
You could use this command get the MonitoringObjectId.
Get-SCOMalert | Select name,
MonitoringObjectId
For more information, please review the link below:
Get-SCOMAlert Cmdlet, the Criteria Parameter and the Non-Equal Operator
http://blogs.technet.com/b/stefan_stranger/archive/2012/11/02/get-scomalert-cmdlet-the-criteria-parameter-and-the-non-equal-operator.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Virtual Machine Base Desktop Deployment Publish RemoteApp Error
Hi, I got error while i am trying to Publish RemoteApp in VDI as below:
To populate the list of RemoteApp programs, the following requirement must be met on the virtual desktop:
1. The currently logged on user must be a member of the Administrators Group on the virtual desktop.
2 The virtual desktop must be available on the network
Exception: Unable to retrieve RemoteApp programs for the Start Menu
Could anyone help to advise on this issue?
Thanks
SpringHi Sir,
"Deploy Windows 7 and 8 Enterprise VMs as your masters "
http://blogs.msdn.com/b/rds/archive/2012/11/26/remotefx-features-for-windows-8-and-windows-server-2012.aspx
http://www.systemcentercentral.com/ws2012-vdi-issue-publishing-a-vm-hosted-remoteapps-fails-in-windows-server-2012/
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Could not create JVM Virtual machine(While starting soa managed server)?
Hi,
While starting managed server I am getting following errors:
Could not commit 1048576KB heap memory at 0x0000000004790000.
Could not create JVM Virtual machine.
After above error SOA managed server is to be down.
Please help me that how can i resolve this issue.
Thanks
DharmHi Dharm,
This is typically printed when we are short on memory.
What is OS version and JDK being using here ? 32bit or 64bit ?
Current Xms and Xmx values ?
Thanks,
Sharmela -
Hi all,
Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
it would seem
some people have had relates to editing the VMX configuration file and adding the line
hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
Any help would be greatly appreciated.
Many thanks in advance.
JamesThe hypervisor event log message is generated only at boot - so this would be expected. Also vmbus should not be running on the host (I was looking at a VM yesterday)... This error message is generated only when the vid is determined not to be
running or cannot communicate with the hypervisor.
I have seen this due to anti-virus software in the past or due to driver verifier being configured. Since it looks like you checked driver verifier already do you have anti-virus software installed? If so have you followed the best practices
and exempted the Hyper-v services?
http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
Custom virtual machine configuration directories
Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
Custom virtual hard disk drive directories
Custom replication data directories, if you are using Hyper-V Replica
Snapshot directories
Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
-Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb -
Time Machine does not start after external hard drive is connected
Time Machine does not start after external hard drive is connected
These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine. -
Blade server is start but virtual machine is not started
i have a oracle virtual machine on blade server if any outage or planned activity is done the blade server is started automatically but virtual machines is not started
manually start the virtual machines any suggestions kindly share me.Hi user,
As long as youhave access to the linux sever from your windows server, you're good to go. Open your admin tool, go to File --> Open --> Offline.
The Open window pops up. On the "File Name" field, enter the path of rpd file in the linux server (Ex: \\Server_Name\local\MyRpd.rpd). Select the file, and voilà!
I hope this helps.
J. -
Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?
Sounds a bit like the Power Supply, but...
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939 -
HT201250 Time Machine App does not start under OS X Lion
I tried to restore an item from my back-up, however the Time Machine App does not start.
I use the latest version of OS X Lion 10.7.5 (Build 11G63).
I used the work around by opening my back-up volume with the finder and copied the wanted item.
However, this is not the correct approach I think.
Does anybody have a solution to my problem?Just the last addition to my question.
The modifications of the access rights took very, very long. In the end I cancelled the process.
Nevertheless, time machine now works correctly. As far as I can see it.
If annybody runs into similar problems. The solution is I think just to modify the access rights on the back-up volume to read and write access for everyone.
Probably OS X Lion added an undocumented feature to the time machine. -
-Xmx greater than 180M does not start jvm on a 2gb machine, why?
Hi, we have developed a product demo shown as an applet that uses the java plug-in to startup.
The demo requires high amount of memory so we modified the java plug-in -xms and -xmx values in the control panel so more memory is available to the applet. What we can not see is why using values higher than -Xmx187M the applet does not start launching an error message either in Explorer of Firefox telling it has been unable to load the jvm. Using the value of -Xmx180M the applet starts but the out of memory message is displayed very soon as the demo requires at least 700M.
We are using:
� JRE1.6_u02
� IE7. FireFox 2.0.0.7
� Computer: 2GB Ram, CoreDuo2.
Does any of you why this limitation in the maximum java heap size?
Thanks for your time and help.
Best Regards.I don't understand the logic for when it will error out on the -Xmx setting.One obvious idea leaps to my mind - because windows doesn't do it.
And googling would seem to support that. Search for "currently implemented up to" in the following.
[http://support.microsoft.com/kb/294418] -
I converted a physical windows 2003 machine to a virtual hyperv machine.
The following error occurs in oradim.log when I try to start the Oracle Windows Service on the virtual server:
ORA-12640: Authentication adapter initialization failed
I recreated the service and the password file but with no luck.
I also tried to change sqlnet.ora with the following: (Replaced NTS to NONE)
SQLNET.AUTHENTICATION_SERVICES= (NONE)
In this case the service was started but when I tried to connect as sysdba using sqlplus "/ as sysdba" the "ORA-01031: insufficient privileges" error occurs. If you connect using the password then it connects fine. But I would like to be able to connect without a password because I have some scripts that I do not want to hardcode the sysdba password.
I also removed and readded the administrator password from ORA_DBA group but again with no luck.Have you seen this:
Oracle Database Service on Windows 2000 in AutoStart Mode with Logon as SYSTEM
(Bug 1397927) If you have installed an Oracle database service on Windows 2000, when logging in as SYSTEM user (Local System), with startup mode set to Automatic, it is possible that the Oracle database service starts but the database does not start automatically. The following error message is written to the ORADIM.LOG file in the ORACLE_BASE\ORACLE_HOME\DATABASE directory.
ORA-12640: Authentication adapter initialization failed
It has also been observed that the services like Oracle Enterprise Management Agent, Oracle Enterprise Manager Management Server and Oracle Internet Directory may also fail for the same reason because they cannot connect to the database.
The workarounds for this problem are:
Remove the line sqlnet.authentication_services=(NTS) from SQLNET.ORA or set sqlnet.authentication_services=(NONE) in SQLNET.ORA.
Start the database manually after the Oracle database service has started using SQL*Plus connecting as user name INTERNAL. Note that the INTERNAL user name will not be available after release 8.1.7.
Start the service as a specific user:
Choose Start > Settings > Control Panel > Services. The Services dialog box appears.
Select the service you want to start.
Click the Startup button. The Service dialog box appears.
Click This account and specify the user name and corresponding password. -
Hi at all.... I'm a newbie with database oracle.,
I have the follow problem:
I installed Oracle Database 11g R2 XE on my guest operating system CentOS 6.5.
I have changed the hostname in my SO CentOS (where is installed oracle 11g R2 XE) after installation was completed successfully.
-) Before and during installation the hostname was localhost.
-) After installation I changed the hostname in VMCentOS
From the moment I changed the hostname, nothing starts up automatically. In particular, the listener and the database instance does not starts up automatically.
When I starts up the listener manually and I try to connect to database instance with SQLPLUS i get this error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I think that the problem is due to the changed hostname because I, for testing and debugging purpose, re-installed a new OS CentOS virtual machine, re-installed oracle database 11g and I have not got that problem. The database instance and the listener starts up automatically!
Can any one tell me if maybe the problem is related to the hostname changed? ... and Why?
P.S.: After changed the hostname I have also modified the listener.ora and the tnsnames.ora by modifying the HOST with the correct hostname.-) Output of command chkconfig (there isn't any line oracle-xe 0:off 1:off 2:on 3:on 4:on 5:on 6:off):
[oracle@VMCentOS /]$ chkconfig
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
abrt-ccpp 0:off 1:off 2:off 3:on 4:off 5:on 6:off
abrtd 0:off 1:off 2:off 3:on 4:off 5:on 6:off
acpid 0:off 1:off 2:on 3:on 4:on 5:on 6:off
atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
auditd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
blk-availability 0:off 1:on 2:on 3:on 4:on 5:on 6:off
bluetooth 0:off 1:off 2:off 3:on 4:on 5:on 6:off
cpuspeed 0:off 1:on 2:on 3:on 4:on 5:on 6:off
crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off
cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off
dnsmasq 0:off 1:off 2:off 3:off 4:off 5:off 6:off
firstboot 0:off 1:off 2:off 3:on 4:off 5:on 6:off
haldaemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off
htcacheclean 0:off 1:off 2:off 3:off 4:off 5:off 6:off
httpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ip6tables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
irqbalance 0:off 1:off 2:off 3:on 4:on 5:on 6:off
jexec 0:off 1:on 2:on 3:on 4:on 5:on 6:off
kdump 0:off 1:off 2:off 3:on 4:on 5:on 6:off
lvm2-monitor 0:off 1:on 2:on 3:on 4:on 5:on 6:off
mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off
messagebus 0:off 1:off 2:on 3:on 4:on 5:on 6:off
netconsole 0:off 1:off 2:off 3:off 4:off 5:off 6:off
netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
ntpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ntpdate 0:off 1:off 2:off 3:off 4:off 5:off 6:off
portreserve 0:off 1:off 2:on 3:on 4:on 5:on 6:off
postfix 0:off 1:off 2:on 3:on 4:on 5:on 6:off
psacct 0:off 1:off 2:off 3:off 4:off 5:off 6:off
quota_nld 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rdisc 0:off 1:off 2:off 3:off 4:off 5:off 6:off
restorecond 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rngd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rsyslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off
saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
smartd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmptrapd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
spice-vdagentd 0:off 1:off 2:off 3:off 4:off 5:on 6:off
sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
sysstat 0:off 1:on 2:on 3:on 4:on 5:on 6:off
udev-post 0:off 1:on 2:on 3:on 4:on 5:on 6:off
vmware-tools 0:off 1:off 2:on 3:on 4:on 5:on 6:off
vmware-tools-thinprint 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wdaemon 0:off 1:off 2:off 3:off 4:off 5:off 6:off
winbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
[oracle@VMCentOS /]$
Moreover in /etc/sysconfig there isn't any file oracle-xe!!!
At this point, I suspect that something in the installation I mistook. -
CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start
Dear,
After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.
From what we see this error seems to be a problem in the license.
Following is the error:
ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.
I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up
Thanks for help!Hi,
From the attached screen shots, I can see the startup type are Incorrect for Many services ,kindly correct their status...
please see below the correct startup type
configuration for LMS Services. As you notice you see that only the
"CiscoWorks Daemon Manager" (except the RSH/Syslog/TFTP services) is set to
start automatically, the Daemon Manager is responsible for starting all the
other CiscoWorks LMS services in a specific order.
So by having the below configuration, LMS will start correctly by itself
after Windows successfully reboots. In fact having any other start up
configuration will cause LMS to not start, because if one of the LMS
services starts before it dependent services, it will not come up and all
subsequent services will fail to start as well.
CiscoWorks ANI database engine - Manual (if Campus Manager installed)
CiscoWorks Daemon Manager - Automatic
CiscoWorks RME NG database engine - Manual (if RME installed)
CiscoWorks Tomcat Servlet Engine - Manual
CiscoWorks VisiBroker Smart Agent - Manual
CiscoWorks Web Server - Manual
CWCS Cmf database engine - Manual
CWCS rsh/rcp service - Automatic
CWCS syslog service - Automatic
CWCS tftp server - Automatic
If DFM installed:
DFM dfmEpm database engine - Manual
DFM dfmFh database engine - Manual
DFM dfmInv database engine - Manual
If IPM installed:
IPM Aging Server - Automatic
IPM DB Server - Automatic
IPM Naming Server - Automatic
IPM PM Server - Automatic
IPM Stopper - Automatic
--Change the statup type Accordingly and then REBOOT the Sever and check the issue again..
Thanks
Afroj -
Minetest translation does not work on my machine.
Hey there.
After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
Since no-one seems to know what’s going on I decided to post my question here, too.
It sems like the translation feature in Minetest does not work on my machine for unknown reason.
The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
Here’s some relevant system information.
$ uname -rms
Linux 3.16.1-1-ARCH x86_64
$ minetest --version
Minetest 0.4.10
Using Irrlicht 1.8.1
Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
$ pacman -Ql minetest | grep locale/de
minetest /usr/share/locale/de/
minetest /usr/share/locale/de/LC_MESSAGES/
minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
$ locale
LANG=de_DE.utf8
LC_CTYPE="de_DE.utf8"
LC_NUMERIC="de_DE.utf8"
LC_TIME="de_DE.utf8"
LC_COLLATE="de_DE.utf8"
LC_MONETARY="de_DE.utf8"
LC_MESSAGES="de_DE.utf8"
LC_PAPER="de_DE.utf8"
LC_NAME="de_DE.utf8"
LC_ADDRESS="de_DE.utf8"
LC_TELEPHONE="de_DE.utf8"
LC_MEASUREMENT="de_DE.utf8"
LC_IDENTIFICATION="de_DE.utf8"
LC_ALL=de_DE.utf8
$ cat /etc/locale.gen
de_DE.UTF-8 UTF-8
en_DK.UTF-8 UTF-8
en_US.UTF-8 UTF-8
According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
16:47:01: INFO[main]: path_share = /usr/share/minetest
16:47:01: INFO[main]: path_user = /home/dirk/.minetest
16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
Irrlicht log: Irrlicht Engine version 1.8.1
Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
Irrlicht log: Using renderer: OpenGL 3.3.0
Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
Irrlicht log: OpenGL driver version is 1.2 or better.
Irrlicht log: GLSL version: 3.3
16:47:01: INFO[main]: text_height=22
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: INFO[main]: Waiting for other menus
16:47:01: INFO[main]: Waited for other menus
16:47:01: INFO[main]: Audio: Initializing...
16:47:01: INFO[main]: Audio: Vorbis extension NOT present
16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
16:47:01: INFO[main]: GUIEngine: Initializing Lua
16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
16:47:05: INFO[main]: Audio: Deinitializing...
16:47:05: INFO[main]: Audio: Deinitialized.
16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
16:47:05: INFO[main]: Searching worlds...
16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:05: INFO[main]: Spielwelt
16:47:05: INFO[main]: 1 found.
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
… or on nopaste.info for better readability.
Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
Hints are highly appreciated Thanks in advance!
Kind regards,
DirkHi there...
It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
It seems that it has not figured out that it needs to open iPhoto 6.
Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
I am using the latest and greatest 10.4.4, Safari is 2.0.3. -
Enterprise Manager Console does not start
Hi,
I'm running a Windows 2000 PC with Oracle 9i Server on it.
When I want to start the Enterprise Management Console
(Start => Program...) there is only a short reaction on
the Taskbar end when absolute nothing.
I know this problem was already mentioned once here (OEM Console does not start but
the answer there wasn't the right one for my problem.
I could not change the oracle home directory with the ORACLE-HOME-Selector, because I have only one home directory (D:\Programme\oracle\ora92)
My Path variable:
D:\Programme\oracle\ora92\bin;C:\Programme\Oracle\jre\1.3.1\bin;C:\Programme\Oracle\jre\1.1.8\bin;C:\WINNT\MS\SMS\CORE\BIN;D:\Programme\Clementine7.2\BIN;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;D:\PROGRA~1\IBM\SQLLIB\BIN;D:\PROGRA~1\IBM\SQLLIB\FUNCTION;D:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL;D:\Programme\IBM\DB2Extenders\bin;C:\Programme\Java\j2re1.4.2_02\bin
And here is my oemapp.bat(It is located in D:\Programme\oracle\ora92\bin. I have already startet it manually with "oemapp.bat console" but there was only the reply ""The input line is too long.
The syntax of the command is incorrect."
@echo off
REM #
REM # Copyright (c) 1998,1999,2000,2001, 2002 Oracle Corporation. All rights reserved.
REM #
REM # PRODUCT
REM # Oracle Enterprise Manager, Version 9.2.0.0.0 Production
REM #
REM # FILENAME
REM # oemapp.bat
REM #
REM # DESCRIPTION
REM # This script is used to launch Applications of Oracle
REM # Enterprise Manager, Version 9
REM #
REM #
if "%1%" == "recursive" goto startScript
if Windows_NT == %OS% goto :ntSetup
command.com /p /e:8196 /c oemapp recursive %1 %2 %3 %4 %5 %6 %7 %8 %9
goto :end
:ntSetup
setlocal
:startScript
IF "%1%" == "trace" GOTO trace
IF "%1%" == "TRACE" GOTO trace
IF "%1%" == "debug" GOTO trace
IF "%1%" == "DEBUG" GOTO trace
GOTO start2
:trace
SHIFT
SET ORACLE_OEM_CLIENTTRACE=TRUE
SET TRACE= -DTRACING.LEVEL=2 -DTRACING.ENABLED=true
:start2
REM Make sure that our JRE is used for this invocation.
if Windows_NT == %OS% SET PATH=C:\Programme\Oracle\jre\1.1.8\bin;%PATH%
if not Windows_NT == %OS% SET PATH="C:\Programme\Oracle\jre\1.1.8\bin;%PATH%"
SET CLASSROOT=D:\Programme\oracle\ora92/classes
SET JLIBROOT=D:\Programme\oracle\ora92/jlib
SET NETJLIBROOT=D:\Programme\oracle\ora92/network/jlib
SET OEMCLASSES=%JLIBROOT%/oembase-9_2_0.jar;%JLIBROOT%/oemtools-9_2_0.jar
SET BALICLASSES=%JLIBROOT%/swingall-1_1_1.jar;%JLIBROOT%/ewtcompat-3_3_15.jar;%JLIBROOT%/ewt3.jar;%JLIBROOT%/ewt3-nls.jar;%JLIBROOT%/share.jar;D:\Programme\oracle\ora92\sysman\jlib\master.jar;D:\Programme\oracle\ora92\sysman\jlib\master_de.jar
SET AURORACLASSES=D:\Programme\oracle\ora92/lib/aurora_client.jar
SET HELPCLASSES=%JLIBROOT%/help3.jar;%JLIBROOT%/help3-nls.jar;%JLIBROOT%/oracle_ice5.jar
SET DBUICLASSES=%JLIBROOT%/dbui2.jar;%JLIBROOT%/dbui2-nls.jar
SET KODIAKCLASSES=%JLIBROOT%/kodiak.jar
SET JDBCCLASSES=D:\Programme\oracle\ora92/jdbc/lib/classes111.zip;D:\Programme\oracle\ora92/jdbc/lib/nls_charset11.zip
SET NETCHARTSCLASS=D:\Programme\oracle\ora92/sysman/jlib/netchart360.jar
SET ORBCLASSES=D:\Programme\oracle\ora92/lib/vbjorb.jar;D:\Programme\oracle\ora92/lib/vbjapp.jar
SET SECURITYCLASSES=%JLIBROOT%/javax-ssl-1_1.jar;%JLIBROOT%/jssl-1_1.jar
SET OSDNETCLASSES=%JLIBROOT%/netcfg.jar;%JLIBROOT%/o3logon.jar;%JLIBROOT%/verifier.jar
SET OSDPKICLASSES=%JLIBROOT%/ewm-1_1.jar;%JLIBROOT%/ojpse_2_1_5.jar
SET NETMGRCLASSES=%NETJLIBROOT%/netmgrm.jar;%NETJLIBROOT%/netmgr.jar;D:\Programme\oracle\ora92/network/tools
SET XMLCLASSES=D:\Programme\oracle\ora92/lib/xmlparserv2.jar
SET OLAPCLASSES=%JLIBROOT%/cvd.zip;%JLIBROOT%/jndi.jar;%JLIBROOT%/jewt4.jar;%JLIBROOT%/jewt4-nls.jar
SET MISCCLASSES=D:\Programme\oracle\ora92/assistants/jlib/assistantsCommon.jar;D:\Programme\oracle\ora92/jlib/jle2.jar;D:\Programme\oracle\ora92/jle2-nls.jar
SET QSMACLASSES=D:\Programme\oracle\ora92/rdbms/jlib/qsma.jar
SET CLASSPATHADD=%CLASSROOT%;%OEMCLASSES%;%ORBCLASSES%;%BALICLASSES%;%HELPCLASSES%;%DBUICLASSES%;%JDBCCLASSES%;%KODIAKCLASSES%;%NETCHARTSCLASS%;%SECURITYCLASSES%;%OSDNETCLASSES%;%OSDPKICLASSES%;%NETMGRCLASSES%;%XMLCLASSES%;%AURORACLASSES%;%OLAPCLASSES%;%MISCCLASSES%;%QSMACLASSES%
REM hook for classpath additions
if not "%ORACLE_OEM_CLASSPATH%" == "" SET CLASSPATHADD=%ORACLE_OEM_CLASSPATH%;%CLASSPATHADD%
REM # Oracle change manager requires the following for ocmtclsh.exe
set GBP=
if not exist %CLASSROOT%\oracle\sysman\vtt\vttz\VttzCmDragDropObject.class set GBP=true
if "%ORACLE_OEM_JAVAMX%" == "" set ORACLE_OEM_JAVAMX=-mx128m
REM if "%ORACLE_OEM_JAVAMS%" == "" set ORACLE_OEM_JAVAMS=-ms16m
SET JRE=jrew -nojit %ORACLE_OEM_JAVAMX%
SET NT_START=START
if "%ORACLE_OEM_CLIENTTRACE%x" == "x" goto setup_cp
SET JRE=jre -nojit %ORACLE_OEM_JAVAMX% %TRACE%
SET NT_START=
:setup_cp
SET CLASSPATH_QUAL=cp
if "%ORACLE_OEM_JAVARUNTIME%x" == "x" goto jreSetup
SET JRE=%ORACLE_OEM_JAVARUNTIME%\bin\java %ORACLE_OEM_JAVAMX% %TRACE%
SET CLASSPATH_QUAL=classpath
SET CLASSPATHADD=%CLASSPATHADD%;%ORACLE_OEM_JAVARUNTIME%\lib\classes.zip
:jreSetup
SET ME=oemapp
SET USAGE="Usage: %ME% <application_name>"
if Windows_NT == %OS% goto ntCheckAppName
if not "%2%" == "" goto start95
@echo %USAGE%
goto end
:start95
if "%GBP%" == "true" goto gbp
%JRE% -DORACLE_HOME=D:\Programme\oracle\ora92 -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %2 %3 %4 %5 %6 %7 %8 %9
goto end
:gbp
%JRE% -DORACLE_HOME=D:\Programme\oracle\ora92 -DGENERAL_BUS_PACK="" -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %2 %3 %4 %5 %6 %7 %8 %9
goto end
:ntCheckAppName
if not "%1%" == "" goto startNT
@echo %USAGE%
goto end
:startNT
set ADMIN_WRL=D:\Programme\oracle\ora92\sysman\admin
set GBP_PROP=
if "%GBP%" == "true" set GBP_PROP=-DGENERAL_BUS_PACK=""
%NT_START% %JRE% -DADMIN_WRL=%ADMIN_WRL% -DORACLE_HOME=D:\Programme\oracle\ora92 %GBP_PROP% -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %1 %2 %3 %4 %5 %6 %7 %8 %9
endLocal
:end
Thnaks for any help.
Nice dayMarcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim
Maybe you are looking for
-
Acrobat 9 Pro will NOT install (CS4 Design Premium)
Acrobat 9 Pro will NOT install (CS4 Design Premium) Acrobat Pro 9 will not install (FAILED), although every other program on the CS4 DVDs did install properly. I have followed the instructions, and have tried with no programs running, not even virus
-
I cannot open a text message picture of larger than 30kb. I can open them in an email. Why won't the text download? I have a Samsung Illusion.
-
Deregistering node successful but it is still listed in deployment page
During an upgrade to 1.1.4, one of the Policy nodes didn't deregister successfully. The Primary shows it as now a standalone, but it seems to still be a part of the distributed deployment. I upgraded the Policy node and the rest of the nodes. I tried
-
I want to reduce my pixel size to 320x320 for web use
I have a small FCP project that i need to reduce in size to 320x320 pixels. How do I do this?
-
QOSMIO X505-Q887 - System Recovery
The disk drive on my Qosmio x505-q865 crashed. Orderd and receiived a new drive and recovery disks. Installation and recovery went smoothly, but some of the drivers are different than the equipment installed on my computer. There were severral er