Vdimm Max at 3.0 for Neo Fisr?

Hi guys,
Can any of you verify that your board has the maximum vdimm for this board up to 3.0V.... I thought it is suppose to be max at 3.2v... Is there any hidden functions??

Yeah I was pretty stuck at 3.2 with my old processor. But I have already change another processor and hoping it will take me further... Hopefully up to 250FSB
Currently I am using 230FSB and prime stable for few hours... So hopefully things will go well with this new board of mine...
So somebody kind enough to tell me what is the max voltage dimm for this 875 Neo Fisr  (PCB2.0).. I think the latest bios must have done something...coz the bios itself say can go up to 3.3v but it is up to 3.0v...
I don't want to flash the old bios back again:-P)

Similar Messages

  • Max VDIMM for neo-fisr?

    What is the max ddr voltage for the 875p neo-fisr (the one with the orange
    pci slot)?
    Thanks!

    a gb of bh-5 aye! mint! no wonder u want to crank to vDimm! i would too  
    i think the 2nd rev only goes to 3... whereas i know the first goes up to 3.2

  • Noob question #2: best neo-fisr bios for overclocking?

    neo-fisr:
    Best bios for high fsb overclocking and high vdimm?
    Thanks!

    the latest one... if you get the old one, it won't work with the latest CPU and fastest... so what for  

  • For 875P Neo-FISR Sandra reports DIMM 1 "Empty" -- 512 chip not showing up

    About 2 months ago, I assembled an 875P Neo-FISR with an Intel P4 3.20E GHz 1MB L2cache and 800 MHz FSB.  I installed 2 Kingston KVR400X64C3A 512MB PC3200 CL3 184 pin DIMMS, one in slot 1 and the other in slot 3 so as to get dual channel mode.  The system reported that I only had 512MB memory.  I tried reseating the DIMMS several times with the same result.  I then moved the two DIMMS to slots 2 and 4, after which the system reported 1GB RAM, and the dual channel mode appeared to be in effect.
    Today, I purchased two more identical DIMMS (PC3200 512MB, same mfctr and model #) and inserted them into slots 1 and 3 for a total of 4 512MB DIMMS.  The system reports that I have 1.5MB RAM, and Sandra reports that slot 1 is "empty."
    I'm not happy.
    I'm running a new copy of XP Pro, which came with Service Pack 2 installed.  I have a variety of peripherals, WD IDE drives, ATI video card, etc. -- none of which should have anything to do with this.  The original problem appeared at the most basic level of installation.

    If the slot was dead two months ago it wouldn't get any better with time.
    If you use only slot one does it work?

  • 875P Neo-FISR vs. 865PE Neo2-V

    Hi, I appreciate any help with this question. I own 2 different MIS motherboards currently and would like to know which would be the better one to use for my system build.
    875P Neo-FISR
    or
    865PE Neo2-V
    Specs:
    Pentium4 3.2ghz socket 478
    2 sticks of PC3200 512mb DDR memory ( kingston Hyperx)
    MSI geforce 6600 agp
    500watt psu ( XG )
    Does it matter what board I use?
    Thanks!

    875P chipset supports ECC RAM and 865PE/P chipset doesn't.
    875P FISR is the 2nd Rev from the predecessor 875P FIS2R and has better support for Prescott CPUs. 865PE Neo2-V is a cutdown version of the predecessor 865PE Neo2 S/LS/FIS2R/PLS/P and has only 2 RAM slots.
    To put the 2 for comparsion, I would choose the 875P Neo FISR but if you are not comparing the cutdown version of the 865PE chipset, I would still favour the 865PE chipset.

  • Really weird Problem with NEO-FISR mobo.

    I'm new to this site, but I am not a noob.  However this is a first for me, and haven't gotten any answers from any of my co workers.  I'm hoping someone else with my board (875P NEO-FISR) will have an answer.
       Anywho, PC was working fine.  Put it in standby mode to watch TV for awhile and come back to check e-mail a few hours later.  I hit the power button and everything lights up, fans start spinning, but no POST.  THen it shuts down after like 3 seconds.  Then another 2 seconds and it pops on, pops on and off continually after that until I hit the switch on the power supply.  
          This happened twice today, and has happened maybe 3 times prior.  However, every other time was a long time ago when I first set everthing up.  Its been like 2 months now and here we go again.  
        Ididn't change anything this morning when I left the PC so I don't know what is causing it.  
      Its a real pain in the ass though cuz I have to clear the CMOS jumper in order too get back up and running.  Then I have to reconfigure all my BIOS settings.  
      SO, has anyone else heard of this happening??  Happened to you???  Any suggestions or solutions would be appreciated!  Thanks

    I have the version 1 875P-FIS2R board and it does the same thing.
    Originally, I just stopped using S3 suspend mode but I have since started using it again and bumped my performance mode down to "fast" to make this work as per a suggestion from another user on the forum(Mitch66).
    You can read more on this from This Thread.
    Never did ever hear of a fix for this.  

  • MSI NEO-FISR Will not Boot

    Specs
    NEO-FISR Bios 3.60
    Pentium 4 3.0 Ghz
    1 gig (2 X 512)  Kingston Valueram
    Radeon 9600
    Soundblaster Live! Value
    CNET Nic (For reasons explained below).
    I HAVE:
    Unplugged everything except for boot HDD, Video, Sound, NIC,  Mouse, Keyboard.
    Reset CMOS Jumper
    Held Ctrl Home
    About a  week ago, the NIC on the board went bad. I didn't want to RMA it since a PCI NIC is only 5 -10 bucks, and shipping is at least as much with no mobo for a month. So, I installed a PCI NIC.
     No problems, been running fine until today. I was fiddling with my power strip, unplugging something and accidentily unplugged the PC, but I don't think this has anything to do with it because it booted once before then. When I plugged it in, it booted to Windows login and froze. Now it won't start at all. Not a power problem, because everything starts and spins up. Just no picture, nothing. The lights on the box thingy (forget what it's called, but you know what i mean, the thing with the USBS and the 4 lights), anyway, it'll light up the top Left one in green, then every once and a while, it'll light up all four in a flash, then go back to just top left. Keeps running, just no picture.
    It's probaly not the graphics card, because the lights don't light up as they should.
    It's not the monitor, I tried my secondary one.
    It's not the CMOS, I used the jumper and reset it.
    It's not the bios, because I havn't updated it recently (because MSI hasn't released one in ages).
    Another odd quirk, the pc will usually turn off immediatly when the power is hit if it's still booting, but it does as if it's in windows. I have to hold it down for it to power off.
    If It's broke i'm not really sure I want to RMA or just buy a new mobo/processor. It's a little out of date, plus I assume RMAing takes quite some time and I can't live without my fast machine for too long.

    It worked! Wow that's wierd. I've never had something as minor as a NIC cause a complete blackout before.
    Chalk that one down as the wierdest computer problem i've ever had.
    Guess I shouldn't of used that old thing that was lying in my parts box! rofl, guess I'd better cough up 5 bucks for a new one!
    Edit:
    Holy crap now the onboard NIC works. Lol, thats quirky. One problem fixed another. I suppose my clearing the CMOS repaired something. Couple days ago i'd stick the cable in and it'd be black. Now it lights up like a firecracker and connects again. Sometimes these things just wanna make me do this:  .

  • MSI 875P NEO FISR ( pcb 2.0) OVERCLOCKING database

    TO ALL MSI 875P NEO FISR ( pcb 2.0):
    POST YOUR OVERCLOCKS HERE

    What I can achieve............ does not mean you can achieve.
    I can do stable:- 3Ghz on 2.4Ghz 533 Northwood - 3.4 on 2.6 Celery Northwood 400  - But only 3.3 on a 2.8 800 Northwood.(That's on 875 Ver 2)
    Depends on CPU, 865 is better for OC work on 478 and PRESCOTTs never used (Stupid dynamic core)

  • 875P Neo FiSR (PCB 2.0)

    Hi, I have this mobo with a prescott installed on it. Unfortunately this mobo doen'st support any vcore changes trough the bios. I allready flashed it to the latest bios (3.6) with no effect. The only way i'm able to adjust the vcore settings is through corecenter, but I rather do it through the bios.
    I read this old topic over at ocforums where some guy named Dcasole claimed to have solved the problem:
    MSI 875p NEO FISR no vcore adjustment for prescott?
    In his post he refers to an older topic from this forum:
    Workaround to unlock Vcore
    Unfortunately this topic he refers to is allready off this forum. So if theres anyone that could give me the solution pls share it! (or Dcasole if youre reading this pls let me know how to fix this.)
    All help appreciated.

    Nick, download " Core Center " and use it to adjust your Vcore but use the bios for other adjustments( FSB)  as it will be much more stable ( Core Center is to buggy for me to use for overclocking)
    As Del states becareful when changing this value as the prescott employs what is known as Dynamic VID which means that the chip will vary the vcore according to the load that is placed upon it in an effort to control the heat
    Also before changing it  make sure you have a cooling solution as raising my VID .4 raised my temps 10 degrees C 
    But be forewarned !If you were to set your vcore at the high limit of what your chip can handle , Dymanic VID could push it over the edge
    Read about why MSI chose to lock the VCore down in our boards here
    Prescott Dangerous Tweeks
    And some more on Dynamic VID
     Dynamic VID
    Hope this helps
    Dave
    PS - I am running at 3.59 stable ( 2.8E) with the stock VCore of 1.36 , Don't be quick to raise it till you see what you have at the stock level

  • 875 P Neo FISR PCB2.0 What ramm works on yours, pls list bios ,Want best dual DDR400 config.

    List  all pls. would be appreciated...
    Thanks...

    I have the same board (NEO 875P FISR PCB 2.0 BIOS ver 3.2) and am using Kingmax PC 3200 mem in dual channel. Not OCing and it runs fine...but if you ae looking to OC, you might be better off trying OCZ, Mushkin, Corsair, Kingston...(too expensive for me).
    P IV 2.8c with HTT Enabled (SP-94 With Vantec Tornado)
    MSI 875P Neo-FISR (BIOS ver 3.2)
    512Mb x 2 Kingmax (MPXC22D-383) PC-3200 CL2.5184 pin DDR DIMMs Running in DUAL CHANNEL
    ATI 9500 Pro 128 Mb DDR (AGP 8x / Fast Writes Enabled / Apprature size 128 Mb)
    Sound Blaster Audigy Platinum
    Pioneer 16x DVD ROM / Sony 52x CD-RW
    80 Gb Seagate HDD 7200 RPM
    Enermax EG475P-VE SFMA 470 Watts

  • Max Number of items for an FI document (999) has been exceded

    Dear Guru's
    I hav production Bom For A ( Truck) , and now when i declare the production it gives me an ERROR :-
    Max Number of items for an FI document (999) has been exceded.
    How i can overcome this error!!
    Please help
    Regards
    Rahul Bhardwaj

    Hi
    You cant post more than 999 line items in FI document and you need to split the document if line items crosses 999.  It looks your production BOM itself contains some errors.  Check it.  Becoz no production BOM contains such a huge materials.  Splitting the BOM into sub BOM may be another option.
    Srinivas

  • Ipad mini ,midi and maxi ! (A4 format) for musicsheets

    I need a ipad maxi ! (A4 format) for musicsheets
    Maybe in the future?

    After trying various different things and resetting my Mini to factory default several times I was able to figure out how to open the mobi files I have on Skydrive and Dropbox in my Kindle app.
    I had to delete both my Skydrive and Dropbox apps and do it through the web browser.  I was able to download the mobi file with Safari and open the file in the Kindle app.
    Firest I reset my Mini setup and installed only the Kindle, Skydrive and Dropbox apps.  I could not open a mobi file into the Kindle app with either The Skydrive or Dropbox app.  I even reset my Mini and installed the Kindle app with just Skydrive and then reset it again and tried with just Kindle and Dropbox installed I could not get it work.
    Finally, I reset again and installed only the Kindle app and used Skydrive through Safari and it worked just fine.  I tested it with Dropbox and Safari and it also worked. 
    So basically, for whatever reason, my iPad Mini just can not open mobi files into the kindle app using either the Skydrive or Dropbox app.  However, my iPad3 running the same IOS and app versions can do it just fine.  Go figure...

  • Max Expansion card size for treo palm 700wx

    I can't seem to find the max expansion card size for a treo palm 700wx. I purchased a 4gb Scan Disk which should be compatible with most ever device so expect that the hardware dosen't support up to 4gb. If anyone has futher information on this I would appriciate it.
    Post relates to: Treo 700wx (Verizon)

    that I have used with no problem is a Transcend 150X Secure Digital Card 4GB.  My pictures and tunes along with backups reside on it.  Had it for a year. In use 2200.03MB with 1718.30MB free currently.
    Post relates to: Treo 700wx (Verizon)

  • MOVED: Cant load networking driver for neo 2 plat

    This topic has been moved to AMD64 nVidia Based board.
    Cant load networking driver for neo 2 plat

    1. Put your Windows CD in the drive.
    2. Select Install Windows.
    3. Let install continue.
    4. After the first restart, you will see something about Recovery Console.  Do NOT select this option.  Just let setup continue.
    5. You will soon see a message "searching for existing Windows installation".
    6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
    7. Select REPAIR.
    8. Just keep going.
    That's it.  Hopefully things will be just fine after the repair is done.

  • Neo-fisr and ddr500

    Well, I've got a good one. I recently purchaced a combo from Monarch Computer, as a matter of fact I haven't even received it yet, but I screwed up and picked the wrong memory and didn't notice it until it had shipped. So I've got a K8T Neo-FISR with Corsair CMX512-4000PT coming. I had them pre-test the combo so I'm hoping its all good but reading all these memory issues here I bet I'll have a problem. Anyone want to give me the good news?

    Kingston HyperX ddr500  pc4000 works.
    Not all memory that works is on the approved list.  You'll just have to try it and see.

Maybe you are looking for