VDK8726 USB 2.0 docking station software download

Where can I download the software for the VDK8726 USB 2.0 docking station? I have looked all over the site and internet but can not seem to find it.
Thanks,
Dan

hey M374llic4,
the software is located here : http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-77129
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

  • HP FQ834UT USB Universal Docking Station software won't work on my HP laptop with Windows 7 64 bit

    I am using Windows 7 and when i went to load software for my docking station, HP FQ834UT USB Universal Docking Station, it said it couldn't use the driver.   Is there a software upgrade to allow this driver to work on a HP laptop with Windows 7 64 bit operating system?   

    I have the same issue - I have it installed on my Windows 7 64-bit machine and although it is running, it doesn't work.  I am sitting here in Starbucks, which has a Verizon Wifi hotspot (actually Boingo - which is what Verizon Wi-Fi uses) and the "Connect" box does not appear.  I had the same issue at an airport recently.  It's one of the worse pieces of software I have had the misfortune to use.  When it fails to connect, it causes the Wifi connection to drop (incompatibility with Lenovo Access Connections, maybe).  I don't think that Verizon understands the meaning of "QA" and "Software Testing".

  • Blue screen from USB adapter on Docking Station

    My T430s will invariably BS within 5 secs ~ 5 mins of plugging in a certain wifi network USB adapter into the docking station, whereas plugged directly into the T430s, it's fine.
    It's a trusty Rosewill RNX-G1W that I carried over from a T61p, and is compatible with Linux on VMWare.  I've used it on XP, Vista, and now Win 7 64-bit.  I have the latest driver, specific to Win 7; although the default one Win 7 self-installs when it recognizes new USB hardware works just fine, except with docking station.
    Any idea why it crashes when in the docking station but not in laptop ports?  Even when laptop is attached to station?  I've tried both the USB 2.0 and 3.0 ports thinking it was power related, but that changes nothing.
    Particulars:  Win 7 64-bit, 16GB RAM, 14" screen w/ NVIDIA Optimus chip.  Event log only show loss of Kernel-power causing crash.

    Hi, No. The product says: Expand what you can do with a suite of accessories designed specifically for the HP ElitePad and turn a true business tablet into a total business solution.Simply connect one end of the adapter to the HP ElitePad, and connect to your USB device on the other end. Then pack and go when you’re ready to disconnect.Get the peace of mind of a one-year limited warranty. Additional support is available (North America only) seven days a week, 24 hours a day by phone as well as through online support forums. and your machine:     http://support.hp.com/us-en/product/HP-Split-13-x2-PC/5401170/model/5442928/document/c03944512/ Regards.

  • I am trying to format a new external hard drive. It is attached via a USB 2.0 docking station. It does not show up in Disk Utility or Terminal, but does show up in System Profiler. How can I get my MacBook Pro to recognise it?

    I need help trying to format an external hard drive. My Mac won't recognise it anywhere other than System Profiler.

    The problem is that it is a Western Digital 3.5 inch internal hard drive housed inside a hard drive caddy. So the only way to connect it to my computer is through a dock.

  • Dynadock Universal USB 3.0 Docking Station: no autoconnect of USB-HDD after Win8 power-up

    Hello,
    I've recently obtained a Dell XPS-12 which only has a SSD-HDD.
    In order to overcome the limitations in terms of available connections I bought a Dynadock which works fine so far.
    I want to use the Dynadock in a configuration where it is the only device connected to the laptop and all peripherals are connected to the dynadock.
    If I connect a USB-HDD to the dynadock I so far did not manage to have the HDD reliably connected to the laptop after power-up, sometimes it works, sometimes I need to unplug the HDD.
    I did not find a sequence of powering up laptop/dynadock that does the job.
    Any ideas?
    Best regards
    Tim Tom

    Did you ever resolve this issue, because I am having exactly the same issue!  Thanks!

  • Toshiba Dynadock Universal USB 3.0 Docking Station (PA3927U-1PRP)

    On every desktop and laptop system I have ever owned, when you plug in a set of headphones into the headphone jack, the speakers are silenced. On my Dynadock, when I plug in my headphones into the front side headphone jack, the speakers can still be heard? What do I need to do to silence the speakers?
    Always looking for help,
    FrankT

    only if you have the USB 3.0 port on your X220.
    Lenovo USB 3.0 port replicator.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Problem with USB port on X6 docking station and X60 laptop

    Hello all,
       One of my users is having a problem that when she undocks the X60 laptop from the X6 docking station and then re-docks it later, the devices connected to the USB ports on the X6 docking station are no longer recognized.  Even after repeated re-boots I can't get the USB ports to work.  The USB ports on the laptop still work, but not on the docking station.  Anyone know what I need to do to fix this?
    T

    BIOS 2.19 is for X61 series not X60(s).
    Here're my solutions.
    Solution 1. Unplug all USB devices from docking station. Reset BIOS to defaults, save settings, reboot, plug all devices back. All of them should work now.
    Solution 2. Power off your system. Un-dock your laptop. Unplug all USB devices from docking. Re-dock your laptop back again. Power on your system. Plug all devices back again after system booting. All of devices should work now.
    I tested both on my X60s working even if it seems rediculous.
    Lenovo promised to send me a new docking; however, I don't think it will help unless new BIOS is released to solve this issue.
    Note: the kep point is you have to wait to plug all devices back to docking after system boots.
    Good luck.

  • T42 non-communication with docking station type 74P6733

    When I fit my T42 laptop on to the docking station, the symbol at lower right of screen shows the battery symbol.  Presumably something is wrong with the connection between the two.  How can I find out if it's the laptop or the docking station, and is their a solution?  Please help.

    I wonder if anyone reading this lives in Somerset UK, so that I could try this out!  It's so irritating - I'm sure it's just the link between the two units.  When I was first given it, the link would break periodically until I discovered that setting the docking station on a thin paperback book did the trick.  I guess something has just bent, or similar.
    I was able to link my Passap knitting machine to DesignaKnit software on the laptop through the docking station for downloading stitch patterns and interactive knitting to the machine.  However, the laptop doesn't have a matching connection, so my husband bought a cable with USB connection.  The designers of the knitting software say this should work, but the screen is saying that the cable isn't plugged into COM1.  Anyone able to help with this please?

  • USB 3.0 Dock doesn't recognize dvi-d

    I have a ThinkPad T540P and a USB 3.0 Docking station.  I can get a VGA monitor to work with the adapter going into the DVI-I port, but I can not get a monitor to work with the DVI-D cable.  Can anyone help?
    Thanks.

    hey RagingPigeon,
    try uninstalling all USB control drivers from your unit and then install this :
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015025
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Issues external LCD: S430 + Lenovo USB 3.0 Dock

    Hello,
    ThinkPad Edge S430 with Intel HD 4000 and Optimus (GT620M)
    I am not able to extend my desktop to the external LCD connected to Lenovo USB 3.0 Dock station
    I am using drivers DisplayLink_7.0M3.exe from DisplayLink (http://www.displaylink.com/support/downloads.php)
    [Display]
    Operating System: Windows 8 Pro, 64-bit
    DirectX version: 11.0
    GPU processor: GeForce GT 620M
    Driver version: 306.97
    DirectX support: 11.1
    CUDA Cores: 96
    Core clock: 475 MHz
    Shader clock: 950 MHz
    Memory data rate: 1800 MHz
    Memory interface: 128-bit
    Total available graphics memory: 4096 MB
    Dedicated video memory: 2048 MB DDR3
    System video memory: 0 MB
    Shared system memory: 2048 MB
    Video BIOS version: 70.08.A8.00.66
    IRQ: 16
    Bus: PCI Express x16 Gen2
    Does anyone have similar issues? How to get this to work?
    I wonder are these two devices even compatible?

    bumping post, still not solved
    may be related to http://www.displaylink.org/forum/showthread.php?t=2070
    Does anyone from Lenovo support have an insight?

  • ThinkPad USB 3.0 Dock Driver Availability Win 8.1

    Driver for ThinkPad USB 3.0 Dock station cannot run under Win 8.1.  Support Center stated: Driver being developed.  Does anyone have an expected completion date?
    Moderator Note; subject edited.

    Hi,
    Which USB 3.0 dock are you refering to?
    If it is this one:
    http://shop.lenovo.com/us/en/itemdetails/0A33970/460/EB6CE8241B8A47E18EBAF06F8726DA3E
    Then the latest driver which supports Windows 8.1 can be found here:
    http://www.displaylink.com/support/sla.php?fileid=100
    Thnaks,
    James

  • Docking station question

    My current port needs replacing.  What are the advantages of a docking station vs a hub?

    The advantage of a docking station over a USB hub is the other connectors. While a hub only has USB ports, a docking station will typically have a VGA port, a LAN port, a sound jack and a microphone jack plus a number of USB ports. The type and number of ports depends on the docking station. A typical docking station is going to cost about $150. USB hubs are a lot cheaper, but only have the USB ports and none of the other ports like a docking station.

  • Docking station for my HP ENVY TS 15 Notebook PC

    I just bought this laptop and I need to buy a dociking station to it. With my previous laptop there was a connector on the bottom that would snap to the docking station and make it work.  The HP ENVY TS 15 Notebook PC does not seem to have any special connections. What dociking station it uses? Thanks

    Consumer laptops no longer have an option for a "snap down" dock which is a shame but now industry standard. HP Business models do have that option. The only thing you can use with consumer models is a USB 3.0 "docking station" which is a bit of a misnomer since they are really "port replicators". However, USB 3.0 has enough bandwidth to replicate any and all ports on the laptop so they can have gigabit ethernet, good audio and even multi-monitor video that works fine.  Something like this: http://www.amazon.com/HP-Replicator-Docking-H1L08AA-ABA/dp/B008KMDVME   See, this one has 2 x usb 2 2 x usb 3, audio, ethernet, hdmi and displayport. It has its own power supply so when you hook up the laptop you hook up two cables to the laptop...its own power cord, and then connect this into one usb 3.0 on the laptop. Almost as quick as "snap down".  If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Pavilion dv7 docking station

    I want to find out if the Pavilion dv7-6b32us will take a docking station.  I'm fairly certain the answer is no but I would like to get that confirmed.  Thanks.
    This question was solved.
    View Solution.

    Not the snap-down kind. Laptop makers have pretty well abandoned those on consumer models and only offer them on purely business models. You can still use a usb 3.0 docking station and since usb 3.0 has such high bandwidth you can have things like video ports and other pass-throughs that work very well. The downside is a usb 3.0 docking station does not charge the laptop so it is not really a docking station to my way of thinking, just a "port replicator". Still you can set it up on your desk with the keyboard, mouse, monitor, printer, etc. and have an extra AC adapter there permanently so you just set the laptop down and plug in two things and you have your desktop setup, hot pluggable even. 

  • USB 3.0 Dock Software won't run on Windows 8

    I ordered a USB 3.0 Dock at the same time as I ordered an Ideapad Y500. The Ideapad came with Windows 8 installed, but the USB 3.0 dock came with Windows 7 software. Are there Windows 8 drivers for this device?

    I would recommend to download the latest drivers from Displaylink: http://www.displaylink.com/support/sla.php?fileid=84 The latest version works very well with Windows 8.

Maybe you are looking for

  • JDO: Query returns too many results.

    Hello, I want to get some DO-Entities from an empty table. When I execute the query I retrieve more than 2 000 000 000 results what is definitly too much for an empty table. The DO has an one-to-many relationship to another class and a many-to-one re

  • Hp 4015: Printing problem on A5 LABEL

    Hi, my new HP LJ 4015 have a problem when I print A5 LABEL, because the ink are not fixed hard on label. I Use MANUAL TRAY 1, LINEAR OUTPUT on the back oh the printer,  I set Size and Label type, I try to setup Fuser setting to HIGH 2, ENABLE SLOW SP

  • How to configure rescheduling for sale order quantities

    kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent. regards, g.v.shivakkumar

  • Help with Chicken of the VNC and Airport

    I had my airport working with Chicken of the VNC perfectly and lost the settigns. Now I cannot get it to work again. What do I do a bridge or port forwarding? And how? There is so much contradictory information that I have just spent the whole night

  • How to create Asset Item & Inventory Item?

    Dear Experts, What makes the Difference in creating Asset Item & Inventory Item? Please help me Thanks Bharath