VDP 6 Expand Storage Did not Rebalance files

I expanded the space on the VDP 6 appliance from 2TB to 4TB by expanding the files (from 3 to 6). But it is still showing over 80% full and growing after several days. It should be around 40% now. How can I force it to rebalance the backups between the new files or at least to acknowledge that it can use the new space? It does say the capacity is 4.1TB, but it says the deduplicated size is 3.3TB which is totally bogus.
According to status.dpn, the garbage collection just ran. It took nearly 2 hours and "recovered 12.09 GB". So garbage collection didn't rebalance the files.
hfscheck ran yesterday successfully, so that didn't rebalance.
It has been thru a half dozen 12 hour maintenance windows. no luck.
All services are running, the only alarm is the VDP: [002] The VDP appliance is nearly full.
So how to I get it to rebalance?

judyfromfairmont wrote:
i'm not sure why you would waste my time with that reply. It was suggested by another tech to use this software to find such issues and it has been the best help to me thus far.
You are assuming that the individual who recommended etrecheck gave you correct advice and the etresoft's advice has to be wrong. The fact is that on both counts YOU are wrong.
For battery issues start with examining System Information>Power (the application is in your Utilities folder) and see what information it may have regarding the battery. You also should run an Apple Hardware test.
As for stray files, download OmniDiskSweeper from the Internet (free) and open it. It will show all of your files and you can delete the ones you feel you do not need.
The etrecheck report is a valuable tool in man instances, but of minimal value in your case.
Ciao.

Similar Messages

I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish. There is a large X with a Question mark in the middle over the entire background of the page. The error message says the file is missing. I did not delete files.

I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish. There is a large X with a Question mark in the middle over the entire background of the page. The error message says the file is missing. I did not delete files. How can I find files that seem to be missing?

This is probably one of the files that is required by the template you are using.
These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
You need to dig down through the folders and files to find what you want...
Contents/Resources/da.lproj/Templates/
If the file is missing you would need to re install the iWeb app...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Xerox Phaser 4500 : "remote host did not accept file (32)"

Am trying to print to our networked Xerox Phaser 4500DT at work. Set it up as an LPR printer as I did with Tiger (setting it up as IPP gives a permission denied error when you try to print), and printed a test page. Worked fine.
Try to print any sort of useful document, however, and I get a "remote host did not accept file (32)" error, when it's spooled about 20% of the document. Anybody run into this, or have any ideas?
I've tried Leopard's built-in 4500 driver, and the Leopard driver from the Xerox website (which seems to be the same version anyway). I've also tried the trick of putting "lp" in the queue name field, which seems to have been the cause of this error for some people. No joy for me, though.

That seems to be an LPD error message, so you could try setting the printer up as either IPP or JetDirect, if the interface supports either one.

Azure blob storage can not load file

I am trying to follow the MSDN tutorial on creating a container in blob storage and am getting the following error:
Additional information: Could not load file or assembly 'Microsoft.Data.Services.Client, Version=5.6.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I have tried numerous stack overflow suggestions such as this
one , to no avail. I have also tried uninstalling Azure storage, and re-installing it as well. Just in case it is helpful here is my test case for Azure storage:
public void TestCloudStorage()
CloudStorageAccount storageAccount = CloudStorageAccount.Parse(ConfigurationManager.AppSettings["StorageConnectionString"]);
CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient();
CloudBlobContainer container = blobClient.GetContainerReference("pictures");
container.CreateIfNotExists();
Thank you in advance for your help!

HI
I know what happend, that's the Nuget Package error.
Azure Storage nuget package 3.0+ have this error.
My solution is use Azure nuget package 2.1+
1 delete all the dll reference for Azure storage (Or recreate a new project)
2 input below command in package Manager console
Install-Package
WindowsAzure.Storage -Version 2.1.0.4
That will resolve your problem absolutely .
Aslo you can refer to other peoples solution.
http://stackoverflow.com/questions/20457846/missing-microsoft-data-services-client-version-5-6-on-azure-websites
My Blog
Please use Make as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I recently purchased a MacBook Pro, I did not transfer files from my old pc with migration assistant when I set up the MacBook. A few days later I did the transfer, now my Itunes library and everything else from my old pc is under a different user account

I've already setup the original user account and do not want to do it again, how do I merge the two user accounts into one so all of my stuff is under one user account?

They are the same Itunes account (mine), but since I transferred the 'user account' with my Itunes library and other files from old pc to my new MacBook, I now have two 'user accounts' on my MacBook. The original I setup when I got the MacBook and the one I transferred from my pc. I've already went thru most of my photos in Iphoto and named all the faces along with general setup of how I want all my settings on my MacBook under the first user account, I don't want to start over and do it all again with the transferred user account, I just want to move my Itunes library I transferred over to my original user account on my MacBook. Does this make any sense? lol

Running script; did not save files

I made an attempt to batch-process a number of files through the scripts/image processor in CS6. I made the source/destination selections and set the images be saved as a Tiff with no compression. Instead of correctly processed Tiff's, I got a lot of open images that never saved. I tried it by launching image processor from Bridge/tools/photoshop/image processor and Photoshop/file/scripts/image processor. I did complete the task by closing CS6 and using CS5.

Perhaps a Premiere forum will get you the help you need.

Successfully processed messages did not generate files

Hi,
I have a situation with file interface were XI is generated text files. I have several successfully messages out of which only some messages created files but not all. I checked the FTP but don't see all the files. Where do I need to start looking or troubleshooting? How can I rerun the successful messages to create the file? I cannot rerun the program otherwise I will duplication in R/3.
Thanks,
Sangita

Hi Sangita,
start having a look at the runtime workbench -> adapter engine where you'll see the status of your messages at adapter engine level.
Could it be that you set the append mode so every time the file content is just appended? try adding a timestamp when you generate the file, just to check if everything is ok.
Are you using condition to create the files? maybe this could be a reason, check the message payload from SXMB_MONI.
If messages are in error in SXMB_MONI you can restart them from there, otherwise if they are in error in the adapter engine you can restart them from RWB.
Hope it helps,
Kind Regards,
Sergio

Did not copy files to iPod because your computer is not authorized.

I don't have any stolen music on my iPod or computer.
but now iTunes says it won't update some of my PAID iTunes purchases to my iPod.
that's not right.

Is that a question?
Possible answers:
http://docs.info.apple.com/article.html?artnum=93867
http://docs.info.apple.com/article.html?artnum=303854

HT5527 I did not move my Mobileme account to iCloud. How can I get off the iCloud mailing list?

I did not move my Mobileme account to iCloud. How can I get off the iCloud mailing list?

If you migrated your MobileMe account before 1 August you should have signed into System Preferences>iCloud with it, and you would be able to see your calendars, bookmarks and emails on the iCloud website. Is this the case? Did you sign into iCloud with your @me.com address?
If you did not migrate your MobileMe account you can no longer do so.
If you did migrate, did you do so from a full MobileMe account or from a Family Pack sub-account? the latter did not get the complimentary storage (because their iDisks were only 5GB anyway).
If you had a full MobileMe account, check on your Mac - System Preferences>iCloud - and see whether that shows the upgrade. If it doesn't, you probably need to contact Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support (MobileMe Support is no longer available) and you may be asked to pay a fee: in this case you should ask them to deal with it without cost (and hope they agree).
Note that you haven't paid anything for your MobileMe storage since your first renewal date after 6 June 2011, and iCloud costs nothing unless you specifically choose to upgrade the storage. Note also the iCloud storage is not general file storage in the manner of the iDisk but is restricted to iOS device Backup, Mail, Photo Journal and Documents.

Photoshop CS6 - Batch function will not save files

OK, I have used the "Automate/Batch" function well over a hundred times, so this situation (first time using it in CS6) is VERY frustrating!
Running Adobe CS6 extended v. 13.0.1 x32 on a Win XP sp3 OS.
I have a slew of photos that need nothing done except to resize from the native file size to 6 in x 4 in @ 150 ppi and save into a new folder (to not override the original). I have recorded the action multiple times now and each time I run the action, the files do not save! Here are the various parameters I've used:
Attempt #1:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
NO checkmarks next to any options
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #1 - DID NOT SAVE FILES
Attempt #2:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Cehckmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #2 - DID NOT SAVE FILES
Attempt #3:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #3- DID NOT SAVE FILES
Attempt #4:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #4- DID NOT SAVE FILES
Attempt #5:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
       Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #5- DID NOT SAVE FILES
Please help! This has never been a problem before CS6 and I truly am at my wits end trying to figure out why the files will not save. I have several hundred files that I need to run this on, so doing it individually is not an option.
Thanks in advance for any and all insights!

I'm having a problem with Automating > Batch as well. Strange enough, I did a batch of other photos and it worked fine. Selecting a new set of folders is not working at all; the files simply pop open and then close but the destination folder remains empty. It also doesn't appear the actions are occuring since I don't see them highlighting as the automation runs. I have no idea why it would work then not. BTW, "Override Action "Save As" is unchecked.
~CG
UPDATE: I put a "save as" command at the beginning of the action, then checked the "Override Action "Save As" box and it somehow works now, but not before stalling on an image (normally the last in the folder) and complaining that the image was being used in another program. The only other program opened was Bridge so I'm unsure why it had a problem. I closed both programs and ran the automation with nothing else opened and it worked ... ?? Confused, but not complaining (for now).

HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my

My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

T410 System Update 4 - Intel Rapid Storage AHCI Driver "Package did not install" Error

I've not had a problem with system Update 4 until today. I went out to check for any updates and there was only one (Optional) listed so I went ahead and tried to install it.
It is Intel Rapid Storage AHCI Driver for Windows 64bit. The installed version is 9.5.7.1002 and the version trying to be installed is 9.6.0.1014. The progress bar indicated it downloaded and tried to install, but ended with the error, "1 Package did not install." Not a lot of help in that statement!?!
Has anyone had a problem like this before? Any idea how to "fix" it so I can install this update?
I even tried once with MS Security Essentials, Windows Firewall and UAC turned off with no difference.
System details are in my sig, below.
Thanks for any help,
Gary A.
ThinkPad T410 | ThinkCentre M83
Solved!
Go to Solution.

Yup, that's what I ended up doing - download and install the standalone file. Installed just fine
Gary A.
ThinkPad T410 | ThinkCentre M83

Failed to create zip file - did not free space

Hi,I tried to zip the inside of my camera folder and naturally did not have enough space.1. Creation of the zip file failed.2. Shows me that there is no more room left on device, i.e. the space was not freed.3. Can not locate the zip file it tried to create (it did not appear in the same folder as "camera" and can't find it anywhere else either). Can anyone help, please, can't copy files anywhere because no space left and don't want to delete anything. Thanks in advance,Dario

In regards to your original problem, but I can see two solutions without Link. 1, get an SD card and transfer some content over. The phone has finite space and this is the only way you can access storage from a computer without Link, so it is then only way to back up files (did I mention that is important yet?). 2, download Ghost Commander from the app world. It is a vastly more powerful file browser that can allow you to see your device storage particulars. I have none idea where a temporary ZIP file is located however, so this is not choice #1.

I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4) and attempted to use Elements on an existing Photoshop file. I did not see the Elements option in my filter menu and need assistance

I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4). The installation to my hard drive went fine so I attempted to use Elements on an existing Photoshop file. I did not see the Elements option in my filter menu and am uncertain as to how to "add" the Elemnts to my existing filter choices. Please advise.

I'm sorry but it's very hard to understand what you mean. What filter menu? In which program? Do you mean you're trying to use PSE as an external editor with some other asset management program? Which one?

I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well. All my songs are in the music folder but not in the itunes folder?? itunes did not prompt me to move file to trash nor is there an option??

I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well. All my songs are in the music folder but not in the itunes folder. itunes did not prompt me to move file to trash nor is there an option to remove file to trash bin. How can i delete songs from both the itunes and hard drive at the same time?

aespinoza2210 wrote:
could it be in the itunes folder or does it have to be in the itunes media folder, which is within the itunes folder??
A Espinoza,
The iTunes Media folder is set in Preferences > Advanced, and is the key to most iTunes folder organizational activities. So I doubt that the automatic deletion will work for files that are somewhere else within the folder structure.
However, I have not experimented with that issue in quite a while, so you are welcome to give it a try in iTunes 11.

VDP 6 Expand Storage Did not Rebalance files

Similar Messages

Maybe you are looking for