VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C ( Not able to open disk management )

Hi,
This is happening on a Windows Server 2008 R2 SP1 server. When we try to open Disk Management it would stay there with a message " connecting to virtual disk service " and after a while the message changes to " Unable
to connect to Virtual disk service ".
The disk management view stays blank with no drives shown in it. And the following error is registered in System event log -- " VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C "
The VDisk service is set to manual and stopped as it is supposed to be.
An application called " PI System " is installed on the server. We noticed that if we stop the " PI Application services " and reboot the server the disk management opens up fine. Has any one faced this or a similar
situation. Thanks in advance for the help :)

Hi VijayKPV,
Lets start with updating the drivers and confirm you have the latest VDS patch updated from the link.
You cannot cancel a shrink operation on a volume in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2615327
If after install above hotfix the problem still exist I suggest you ask your PI system software vendor for the further help.
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on. Then see if you can access Settings.

Not able to open any doc with adobe reader XI. fatal error, acrobat failed to its core DLL load

not able to open any doc with adobe reader XI. fatal error, acrobat failed to its core DLL load

See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

My iphone 4 keeps failing to restore at firmware update point with -1 error code - have tried on multipke computers and will not restore ??? please help

I woke up this morning - xmas day of all days and had a message on my phone that it needed to be restored via itunes. I connected it to my laptop and it tried to restore but failed at the point of iphone firmware update. I have back-ups etc - I have tried it on two different laptops and have tried at least 10 times but keeps failinhg at the same point - has anyone else had this and found a cure or is the phone dead. Its on ios 6.0.0.1

Error -1 could indicate a hardware issue. You may need to take the device to an Apple Store and have it looked at
Read here > http://support.apple.com/kb/TS3694
Sorry for the bad news

Aperture fails to load images from CF card, now not able to open

I have a new Canon 5D Mark III camera and was sold a Lexar SD Professional 32 GB card and a Lexar Professional UDMA 7 Compact Flash 32 GB card. Downloading the images from the camera is a problem. I am using a Mac Book Pro 15" with operating system OSX 10.6.8. Aperture is on a Lacie external hard drive and now fails to open. Yesterday, a message saying 'unreadable files' would show and a few images would be saved to Aperture. Also, later, an 'unrecognizable format' message would appear. Before it stopped working, it would download one or two selected images but not a large number of images.
Any solutions? Any comments would be appreciated. Thank you!

Thanks Ernie! The images would not load from the camera with the USB camera supplied cable. Yes, the MBP has slot for the SD card and it downloads the images.
The Aperture library is on the LaCie external HD. Don't know if the drive is formatted as OS X extended.
After posting the entry, I went to the local Staples store and purchased a Verbatium card reader and lo and behold, the world is fine. The Aperture has returned and I was able to download all the CF card images. The card reader would not read the SD card despite having it listed as one of the cards it's able to read. Don't know what's happening here but at least I can use the MBP slot.
To me, it's strange! It was all looking quite grim! Thank you for your assistance!

When i install updates one update fails to update for the monitor and gives a error code 80070005.

model a6637c desktop
product FK549AA-ABA
software build 84NAv6PrA1
serial
{Removed for privacy}
How do I correct error 80070005 for update lcd monitor failure

Hello chuck1955,
The error you are getting is usually generated because of either you not being an administrator or having malware on your machine. Now if you can install other updates that makes it a little odd.
Try the steps in this Microsoft KB just to rule them out as the problem.
http://goo.gl/ECD17
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Recover tablespace is failing and not able to open database

Hello All,
I am using Oracle RAC 11g R2 on Linux. My database is running in NOARHIVELOG mode.
I am testing some RMAN scenarios.
After doing a the below scenario: I think the problem that I used switch log file!!!
RMAN> backup tablespace 'USERS' TAG 'TestBkp_FRA';
RMAN> backup backupset 10 format '/testasm/backup%U' delete input; -- here 10 is the backup set generated in the previous command
RMAN> BACKUP INCREMENTAL LEVEL 1 tablespace users;
alter system switch logfile;-- many times i am not able to recover my users tablespace because of the below :
archived log for thread 1 with sequence 19 is already on disk as file +DATA/orcl/onlinelog/group_1.261.772044543
archived log for thread 1 with sequence 20 is already on disk as file +DATA/orcl/onlinelog/group_2.262.772044547
archived log for thread 2 with sequence 4 is already on disk as file +DATA/orcl/onlinelog/group_4.266.772044919
RMAN-08187: WARNING: media recovery until SCN 1101381 complete
Finished recover at 27-MAR-2012 17:21:36and I am unable to open my database:
RMAN> alter database open;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/27/2012 17:26:18
ORA-01113: file 4 needs media recovery
ORA-01110: data file 4: '+DATA/orcl/datafile/users.259.772044111'below is a list of my backups
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size       Device Type Elapsed Time Completion Time
9       Full    1.45M      DISK        00:00:02     27-MAR-2012 12:06:47
        BP Key: 11   Status: AVAILABLE Compressed: NO Tag: TESTBKP
        Piece Name: /testasm/backup0an6tvil_1_2
List of Datafiles in backup set 9
File LV Type Ckp SCN    Ckp Time             Name
4       Full 1092418    27-MAR-2012 11:40:06 +DATA/orcl/datafile/users.259.772044111
BS Key Type LV Size       Device Type Elapsed Time Completion Time
10      Full    1.45M      DISK        00:00:04     27-MAR-2012 15:58:54
        BP Key: 13   Status: AVAILABLE Compressed: NO Tag: TESTBKP_FRA
        Piece Name: /testasm/backup0bn6ud5q_1_2
List of Datafiles in backup set 10
File LV Type Ckp SCN    Ckp Time             Name
4       Full 1100603    27-MAR-2012 15:53:40 +DATA/orcl/datafile/users.259.772044111
BS Key Type LV Size       Device Type Elapsed Time Completion Time
11      Incr 0 1.45M      DISK        00:00:05     27-MAR-2012 16:16:59
        BP Key: 14   Status: AVAILABLE Compressed: NO Tag: TAG20120327T161652
        Piece Name: +FRA/orcl/backupset/2012_03_27/nnndn0_tag20120327t161652_0.261.779041015
List of Datafiles in backup set 11
File LV Type Ckp SCN    Ckp Time             Name
4    0 Incr 1101381    27-MAR-2012 16:13:11 +DATA/orcl/datafile/users.259.772044111
BS Key Type LV Size       Device Type Elapsed Time Completion Time
12      Full    1.45M      DISK        00:00:02     27-MAR-2012 17:00:26
        BP Key: 15   Status: AVAILABLE Compressed: NO Tag: TAG20120327T170023
        Piece Name: +FRA/orcl/backupset/2012_03_27/nnndf0_tag20120327t170023_0.260.779043625
List of Datafiles in backup set 12
File LV Type Ckp SCN    Ckp Time             Name
4       Full 1101381    27-MAR-2012 16:13:11 +DATA/orcl/datafile/users.259.772044111My database is running in NOARCHIVELOG mode I have no Full database backup.
How can I start my database. Please help!!

NB wrote:
What do you mean ?
Now I am not able to open my database. it is mounted.
What steps should i do ?If you try to backup database in NOARCHIVELOG mode, you will get below errors
RMAN> backup database;
Starting backup at 27-MAR-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/27/2012 20:30:26
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN>
RMAN> backup tablespace users;
Starting backup at 27-MAR-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/27/2012 20:30:58
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN>Can you tell me how you took backup? have you taken backup from MOUNT status when its in noarchivelog mode?
If there is inconsistency of SCN, you cant recover it.
Please describe how you took backup & why you want to perform recovery in noarchivelog mode?

7.1.1 iTunes Fails to Launch (No Error Message, Pretty Weird)

After downloading iTunes 7.1.1, I installed iTunes. The installation went well and everything was installed. I had no problem with installation.
However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
The weird thing is, is that iTunes version 4.0 works perfectly. (I think it's 4.0. It's the one that has the green note. The current versions have the blue note.)
I can open it up and play my music.
I have a Dell Dimension 8200 (It's about 6 years old.) The operation system is Windows XP.
Can someone explain and tell me how to fix this problem, so I can open iTunes 7.1.1.
Thanks.

However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
doublechecking one more thing that can help narrow in on possible culprits with these sorts of symptoms.
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

Backup failed for Windows 2008 R2 error code 2147755009 event id 19

Hi Guys,
I'm doing Windows server backup to a NAS drive via iSCSI target, and everything works fine until a few weeks back where my backup started to fail with the above event ID and error code. Description provided by Microsoft doesn't help either as it simply doesn't
explain much at all. (http://technet.microsoft.com/en-us/library/cc734218%28v=ws.10%29.aspx)
I updated the firmware of the NAS drive, make sure iSCSI connection wasn't dropping, and i even manage to do a backup manually via the "Backup Once" action. But when it comes to scheduled backup, it keeps on failing. I'm pretty sure the NAS drive
is working fine as well as iSCSI connection since i can do a backup manually.
Any idea guys?

Hi,
Could you please provide more detailed information about the error? You could refer to the article below to check if it helps:
Event ID 19: The backup operation attempted at '‎specific date' has failed to start, error code '2155348032'
https://bluesolutions.zendesk.com/entries/23345746-Event-ID-19-The-backup-operation-attempted-at-specific-date-has-failed-to-start-error-code-215534803
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"

"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpaulding

I just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding

"An unexpected error occurred (error code -43)" when launching Time Machine

Hi! When attempting to launch Time Machine, I get the following error:
The operation could not be completed
An unexpected error occurred (error code -43)
My machine is a 2.8 GHz Quad-Core Intel Xeon running 10.5.8
What's strange is that Time Machine DID work just the other day. It would launch automatically when I plugged in my external HD (Maxtor One Touch) though I didn't set it up to back up yet. After I reformatted the drive to Mac OS Extended (Journaled), Time Machine started giving me this error and won't launch. Any ideas here? Thanks!

When you reformatted, it got a new UUID (Universally Unique IDentifier), which may be confusing Time Machine. Try just reselecting it, per +Time Machine Preferences.+
If that doesn't help, try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

IDispatch error codes 5056, 1590, and 1557 makes hfm Srvr registration fail

I have installed EPM 11.1.1.2 and configured everything successfully except for Financial Management. When configuring Financial Management the Server/Cluster registration fails and I can't deploy to the imbeded App Srvr.
the hfm-config.log file shows the following Failed entries; How do I find out what IDispatch error codes 5056, 1590, and 1557 are?
(Thu Jul 30 17:58:53 2009) Failed to register cluster epm. Line:1438 File: .\CHFMConfig.cpp Error code:0x800415c0 Error: IDispatch error #5056
(Thu Jul 30 17:58:53 2009) Cluster registration failed. Line:1452 File: .\CHFMConfig.cpp Error code:0x80040836 Error: IDispatch error #1590
(Thu Jul 30 17:57:50 2009) Successfully set the user to DCOM limits
(Thu Jul 30 17:57:50 2009) Attempting to register the cluster/server
(Thu Jul 30 17:58:53 2009) Failed to set register Servers and Clusters. Line:536 File: .\CHFMConfigUtil.cpp Error code:0x80040836 Error: IDispatch error #1590
(Thu Jul 30 17:58:53 2009) General Error. Line:827 File: .\CHFMConfigUtil.cpp Error code:0x80040815 Error: IDispatch error #1557

Error launching the 'LabVIEW.Application [Error Code: -18001]

Hello,
i have a TS 3.4 Sequence wit LabView 8.21-Teststeps.
The Sequence is called from an Labview-OperatorInterface.
In a step which run before 100 times without problems i suddenly get the error-message:
ErrorMessage: Error executing substep 'Run'.Unable to launch the 'LabVIEW.Application' ActiveX automation server [Error Code: -18001]
After a restart of al NI-Software everything is working normal again.
What does this error mean and what should i do with it?
Should i ignore the error and try to execute the step again or does this mean tht the ActiveX-Server was lost forever?
How can this problem happen?
Thanks for your help
Solved!
Go to Solution.

Hi,
Its difficult to know what the problems is that causes this. I am guessing you are using either the RTE or Runtime Server rather than LabVIEW Developement system.
Once you get this error you can't ignore it and hope that repeating the step will regain the link to the server. (well that's what I've noticed).
There is a patch for labview 8.2.1 http://joule.ni.com/nidu/cds/view/p/id/906/lang/en that you might what to try.
And there is TS version 4.0.
Regards
Ray Farmer
Regards
Ray Farmer

VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C ( Not able to open disk management )

Similar Messages

Maybe you are looking for