VE Third Party Plugin Maya 2014

Hi,
we have installed the Third Party Plugins for Maya 2014 to use RH File Formats in Maya.
But this plugins seems to have some bugs
Always when you activate the rh_maya2014.mll plugin we get the following messages:
- "New menu sets are available. Your menu set preferences must be updatet to accept them. Custom menu sets will not be affected."
And then comes the mesage:
- " the shelf Polygons has items that cannot be read"
Also there is the message:
"Error in line1: initialize plugin function failes (rh_maya2014).
Result is that many of our old preferences doesn't work anymore.
Can anybody help us. Is there a newer version of the "RH maya 2014 plugin" ?
Thanks!

Hi Tobias,
I have been in touch with Development, it appears that the file QTLibs.dll is not required. Unfortunately it is incorrectly listed in the Installation Script. Thus you can remove it from the folder mentioned above.
I ran some tests. When I turned off the plugin, Maya behaved somewhat unusual when next restarting e.g. I have to choose save or close scene before I got into the application. After this the application ran ok.
I subsequently deleted the Qtlibs.dll from the folder above and the plugin and application ran then without issue. Just one other thing, when I installed the plugin I ran it in Administrator mode. These are the only things that were done. It has also been confirmed to me by a colleage that the plugin is running ok on their system. Is there anything else that you think maybe a factor e.g. multiple releases of applications on same client, third party addons, folders/files being shared among other applications?
Kind regards,
SAP VE Support

Similar Messages

How to use third party plugins in PP CC 2014

This is my first venture to use a third party plugin, in this case it's a transition plugin, and I'm trying to get it to work in my newly updated Premiere Pro CC 2014 on my Windows computer. I unzipped the files for the plugin into the Program Files/Adobe/Common/Plug-ins/7.0/MediaCore folder. When I open PP and go to add one of the new transitions, they don't appear in the Video Transitions drop down menu to select and apply them. I did some googling and saw a workaround involving an adjustment layer, but also saw several posts that said the 2014 version enables drag and drop compatibility. Any input greatly appreciated.

It's called the Fancy Particles Transition Pack authored by Stefato which I found on Videohive here: Motion Graphics - Fancy Particle Transitions Pack | VideoHive. There were four versions which came zipped and I unzipped them to the MediaCore folder reference in my original post. When I saw the 7.0 in the path I kinda figured something may have changed on the internals between PP 7 and PP8. Still hoping someone will come through with a solution.

Third Party Plugin for Maya

Hello ,
Does SAP plan to release the third party plugin for Maya 2015?
the answer to this question will help me to decide which software to buy because my workflow heavily depend on exchanging models between maya to SAP 3D Visual Enterprise Author (also known as: Deep Exploration).
Thanks,
Eyal.

Hi Eyal,
Yes we have just started work on new versions of third party plugins which will support Maya 2015.
thank you,
Vladimir Noskov

RED Workflow questions with Mac Pro (including third party plugins)

Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
Here is what I’m working with:
2014 Mac Pro
-2.7 GHz 12-core intel xeon E5
-64GB Ram
-Dual AMD FirePro D700 6GB
-1TB Flash Storage
Editing all footage off 96TB Raid 6 mini-sas server (getting about 1100mbs read/write rate according to AJA system test) which is faster than any Thunderbolt/TB2 drive array I have.
Media I work with is footage from the RED Epic (normally 5K) as well as DSLR footage from the 5d.
Software:
-PrPro CC 2014 (8.1)
-Magic Bullet Looks 2.5.2
My question(s) pertains to RED post-pro workflow in combination with third party plug-ins and the different approaches to make it more efficient.
Right now, majority of the clients need a 1080p HD master, and they are generally anywhere from 2-8 minutes (usually). So my sequence settings are as follows:
Video:
Editing Mode: RED Cinema
Size: 1920 x 1080
Audio: 48Hz
Video Previews
Preview File Format: I-Frame Only MPEG
Codec: MPEG I-Frame
1920x1080
Maximum Bit Depth unchecked
Maximum Render Quality unchecked
Composite in Linear Color checked
Export Settings
H.264
1920x1080
VBR 1 pass
Target Bitrate 12mbs
Max bitrate 12mbs
Maximum render quality/depth/previews unchecked
Issues I have:
-Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
-Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
So my questions are:
Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
Would using offline editing help at all?
Do you place your effects on adjustment layers?
Is there anyway to improve export settings when using an array of filters?
Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
Is there any other tweaks that you would suggest for RED workflow with PrPro?
Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?

Hi This Is Ironclad,
thisisironclad wrote:
Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
The biggest issue is that most people have is that updating OS X causes certain folders to be set to Read Only. See this blog post: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
thisisironclad wrote:
Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
Here is what I’m working with:
2014 Mac Pro
-2.7 GHz 12-core intel xeon E5
-64GB Ram
-Dual AMD FirePro D700 6GB
-1TB Flash Storage
It's a nice base system. How about an additional speedy disk for media cache files. You also did not mention which version of OS X you are running.
thisisironclad wrote:
Software:
-Magic Bullet Looks 2.5.2
The Red Giant website does not indicate that this software is yet updated to work with Premiere Pro CC 2014.1 (8.1). Proceed with caution here.
thisisironclad wrote:
Issues I have:
-Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
I would not use this plug-in until you get the OK from the manufacturer.
thisisironclad wrote:
-Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
Again, I suspect your plug-in.
Keep in mind that exports are largely CPU based but you can make sure that GPU acceleration is enabled for AME at the bottom of the Queue panel.
thisisironclad wrote:
So my questions are:
Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
It's OK.
thisisironclad wrote:
Would using offline editing help at all?
No need when you should be able to edit natively. Relinking might also be an issue.
thisisironclad wrote:
Do you place your effects on adjustment layers?
That's one way you can do it with the benefit of being more organized.
thisisironclad wrote:
Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
I do. Of course, that's a preference.
thisisironclad wrote:
Is there any other tweaks that you would suggest for RED workflow with PrPro?
Try the following:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Ensure Adobe preference files are set to read/write(Hopefully you checked this out already)
Delete media cache
Remove plug-ins
If you have AMD GPUs, make sure CUDA is not installed
Repair permissions
Disconnect any third party hardware
If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCLYou have AMD GPUs.
Disable App Nap
Reboot
thisisironclad wrote:
Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?
I really shouldn't answer that question.
Hope this helps.
Thanks,
Kevin

Third party plugin for premier pro cs6

I installed a third party plugin for premier pro cs6 on my mac and it's not loading... How can get premiere to see it in the program?

hi todd,
cart in front of the horse syndrome - wrote BEFORE reading the article. sorry ;-)
am coming from 10 years of vegas, unhappily so, but at my age 60+, i'm wary of anything new....

How to reinstall a corrupt, third-party plugin?

This is a multi-level issue.
After purchasing and installing Recosoft PDF2ID (a very useful and clever plugin that allows a user to open PDFs right into InDesign), I noticed that InDesign would hang on Quit. Becasue this hang (and my subsequent force-quite maneuvers) became the norm, I decided to disable PDF2ID, the one third party plugin I had added to ID, using the "Adobe Exchange Manager".
After I did that, "magically", ID resumed it's normal quit process; in other words, no more hanging but just a simple, happy and definitely terminal Quit.
I contacted Recosoft and they replied " We have tens of thousands of PDF2ID installations (amongst various users) and this is a first". So, in other words, I should not have an issue myself because other users do not. That's logical, right?
I then decided to enable PDF2ID once more just so I could obtain some sort of crash log on Quit; something I could send Recosoft for them to examine and possibly find the problem.
When I did enable the plugin again (Exchange screen below, last item enabled), I got a "Startup Alert" -also attached.
Only one time, the plugin loaded and, as expected, ID hang on Quit.
After that I could not get the plugin to load again (but got more "Startup Alerts").
I emailed Recosoft again and send them the Force-Quit log. they told me that they saw no issues and, furthermore, they added "You should contact the Adobe Exchange store to download it and install it again.".
I did.
After spending 2 useless hours with Adobe on the phone, they told me (in an email I asked them to send me) that "The plugin is from Recosoft & not from Adobe, we have helped you [not true at all] with the installation & activation of the plugin but we cannot help you with the usage of the plugin." I never asked them to help me with the usage of the plugin. I asked them to help me reinstall a plugin that I had purchased through Adobe Exchange, a function that apparently Exchange cannot perform.
So, I purchased a plugin using Adobe Exchange. The plugin somehow went bad and impairs the normal functioning (quit, to be precise) of InDesign. Recosoft won't help because I bought their plugin through Adobe Exchange and Adobe won't help either (but is happy to send me an email with a lie embedded in it) because it is not their plugin ... Who should I call now? Apple because I'm using a Mac? The manufacturer of the chair where I sit while I work?
Maybe they are the ones who are supposed to help me get a replacement plugin installed. You tell me.
Thank you.

Thanks for the condescending advice. I did contact the vendor first. That's obvious, a no-brainer. Their (Recosoft's) reply was: "... contact the Adobe Exchange store to download it and install it again." Later they explained that because the plugin was acquired through Adobe Exchange and because they only sell that PDF2ID Lite version through Adobe Exchange, I had to ask you for assistance.
In short, although they indeed build and provide the plugin, it is Adobe Exchange the engine that does the work to download, enable and/or disable a plugin. Exchange does nothing, however, to replace a bad plugin; there is no setting or button or whatever to re-download from source, replace a bad file and reinstall. The only options are enable and disable plugins OR purchase a plugin again. The latter is not a solution, really.
What's interesting to me (other than this thing is still an exercise on pointing fingers) is that when a third party plugin to be used with an Adobe tool is added to your workflow it immediately acquires an Adobe-designed icon, a reflection of Adobe's brand. In general, one does not want to stamp a product with one's own brand unless one is ready to take some sort or responsibility for that product. Adobe appears not follow that logic though. You add one of your branded icons to a product that (it is obvious to me) you take zero responsibility for, one that I can't expect Adobe to support ...

Third party plugins

which third party plugins supported in fcp X

Tom Wolsky wrote:
Also CGM has FCPX effects and transitions. And CoreMelt have ported their effects to FCPX. And for really amazing effects there are GenArts Sapphire Edge effects. None of these are free, but if you want a great, customizable look that's stunning and unique I don't think you can top GenArts.
Thanks Tom,
I bought CoreMelt for my FCE4 but it sometimes make the FCE4 very slow and lethargic.
I will go & check out the GenArts.
Thanks

Logic X and 9 looking for third party plugins in the wrong place Mavericks

Hi all
i'm having trouble loading up old sessions in logicX and Logic 9 with my recent upgrade of computer which came with mavericks.
can anybody please help me!!
Logic is searching for third party plugins like this:
this is a real pain because when i replace the plugin with the exact same plugin from its propper location i loose all the settings that were originaly used.
thanks in advance
Mitch

See if this helps: Find your hardware serial number.
and About This Mac

16.0.3: custom cursor for third party plugin missing

We are using a third party plugin which has its own cursor (probably 16x16 png), and after upgrade to AI 16.0.3 on Mac OS 10.8, iMac, the custom cursor just gone, currently it ues system cursor (a black arrow).
Any detailed info about this upgrade may cause the problem?

So, here's what happened. In the 16.0.3/16.2 update, Adobe broke sAIUser->SetCursor(). Any plug-in that was using this call to display cursors will no longer be able to change their cursors on Mac. Cursors did not break on Windows. There are two options for developers; either change to platform cursors or wait for Adobe to issue a fix (I do not know, however, if one is planned). Hot Door has already changed to platform cursors and will be issuing an update later this week. There is a discussion on StackOverflow for those interested in the programming solution.

Third party plugins for garageband

Are there third party plugins that work on garageband other than the Jampacks? I have a ton of VST instruments (reaktor, triangle, kontakt, etc.) that i've used on my windows setup but I want to move everything over to the mac. am i restricted to apple software? am I going to have to use some other sequencing/music production software?
Thanks,
Michael

There are hundreds of plugins that will work in GarageBand, they just have to be Audio Unit plugins.
There is also an AU wrapper that claims to enable the use of VST, however I have no first hand experience with it.
--HangTime [Will Compute for Food] B-|>

Third Party Plugin - Final Cut Express 4 HD

I'm not able to visualize the plugin in the Effects menu toolbar and I was told that I need to install a FxPlug Support that is provided from Apple for free. Well, two things, I do not know where to find it this FxPlug and why after installing my plugin is not working.
Thank you ion advance for any help or light on this issue.
Best,
jlvsouto

Thanks for your answer!
The software does not give me the option where to install it and I'm kind of lost.
Is the FCE 4 work with third party plugins?! I was told that not! Is it true?!

Easy browsing the third-party plugin presets?

In Logic 7 there's nice instruments and nice presets.
But the best part is that you can use keys for previous/next setting.
Thatway it's easy to find the right sound.
Third-party plugins have different ways to browse the presets.
(every plug is different ****)
But I hate to use the mouse...
So is there a way to browse the presets in the same way for all the plugins??
Thanx (solving this would spare me some years of my life)
POWER MAC G5 2G dual Mac OS X (10.4)

Hello, I'm not a very accomplished JavaScripter, but have found that you can access some InMath at least in CS3. I only needed to be able to refresh the InMath styles from a script.
If you run this script...
app.menuActions.everyItem().name;
it will return the names of all the available menu actions. The list is quite long, but it includes some of the InMath actions. At least the ones you can assign keyboard shortcuts to. In my case, I needed to refresh the InMath styles from a script. So I found the name of the InMath menu action that was returned from the above script (Refresh All InMath Expressions) and was able to make a script that refreshed the styles like this.
app.menuActions.itemByName("Refresh All InMath Expressions").invoke();
However, I'm trying to figure out how to do this in CS2 because my client is still using CS2 and can't find the CS2 version of menuActions.
I think I read your other post about the find/change fillColor bug. I was stuck in the same place and now have it working thanks to the posted help. I was working on a script that would fix fractions based on their colors.
Hope this helps.
Andrea

How to access the third party plugin

i am new to javascript and InDesign.now my work is to access the Third Party plugin styles, the third Pary plugin is all about InMath.
is it possible to access third party plugin through java prgramming.
plz help me.....
by
subha

Hello, I'm not a very accomplished JavaScripter, but have found that you can access some InMath at least in CS3. I only needed to be able to refresh the InMath styles from a script.
If you run this script...
app.menuActions.everyItem().name;
it will return the names of all the available menu actions. The list is quite long, but it includes some of the InMath actions. At least the ones you can assign keyboard shortcuts to. In my case, I needed to refresh the InMath styles from a script. So I found the name of the InMath menu action that was returned from the above script (Refresh All InMath Expressions) and was able to make a script that refreshed the styles like this.
app.menuActions.itemByName("Refresh All InMath Expressions").invoke();
However, I'm trying to figure out how to do this in CS2 because my client is still using CS2 and can't find the CS2 version of menuActions.
I think I read your other post about the find/change fillColor bug. I was stuck in the same place and now have it working thanks to the posted help. I was working on a script that would fix fractions based on their colors.
Hope this helps.
Andrea

How to access third party plugin (inmath styles) in indesign SDK

Hi All,
I would like to know that how can we access third party plugins like inmath styles in indesign SDK using VC++. And also I got C++ header file from the third party to interface their style into indesign. Please help me how can we do that.
Thanks
Saravanan Rethinam

You have the header file from inmath. It must contains something like this:
#define kTPPrefixNumber 0x89ABC      // Prefix number of the plug-in issued by Adobe
DECLARE_PMID(kInterfaceIDSpace, IID_ITHIRDPARTY, kTPPrefixNumber + 12)   //
class IThirdParty : public IPMUnknown
     public:
     enum { kDefaultIID = IID_ITHIRDPARTY };
     virtual bool16 IsThirdPartyEnabled() =0;
To use it in your code obtain an interface to object. You need to know where to look for it. Here is an example where it is on the Application boss:
#include "../ThirdParty.h"
InterfacePtr<IApplication> theApp(gSession->QueryApplication());
InterfacePtr< IThirdParty > iThirdParty(theApp, UseDefaultIID());
if (iThirdParty != nil) {
     // Safe to call functions on the Interface ...
     if (iThirdParty-> IsThirdPartyEnabled()) {

How to access third party plugin through vc++ Programming

Hi,
i am new to vc++ and InDesign, i am using windows xp as OS and Indesign CS3 as version
now my work is to access the Third Party plugin styles, the third Pary plugin is all about InMath, that is all for mathematical relations using inmath plugin styles, my work is to accessing the styles through programming by using a InMath header files,
i tried to the best of myself, but i not get the solution,can u please give some thing usefull do this.
is it possible to access third party plugin through VC++ prgramming usign a single header file??
regards,
ram

Hi,
Can anyone please help me to accesss InMath styles in InDesign SDK using VC++ Programming.
Thanks
Saravanan

VE Third Party Plugin Maya 2014

Similar Messages

Maybe you are looking for