VE54 Preference calculation Missing Protocoll

Dear Gurus,
When running VE55 Preference calculation only for one material it brings a protocoll saying exactly
which components involved etc.
When running VE54 Preference calculation fior mass materials it brings only a running protocoll.
There is no protocoll saying exactly which components were involved.
According German authoritities it is obligatory to save the protocoll of the preference calculation
And this protocoll should contain exactly which components were involved etc.
Is there any chance to get such a protocoll in VE54 somehow?
Thanks
Regard
Dieter

The help file says the logs are issued automatically:
http://help.sap.com/saphelp_46c/helpdata/en/e7/ace056a1fb11d1b4e50000e82d81b0/frameset.htm

Similar Messages

  • Preference calculation with batch management

    Hi experts,
    I am trying to find any documentation or manuals about how to set-up and use preference calculation in SAP-SD-FT or GTS based on batch management.
    Does anyone of you know how to do it and use such kind of "standard"-SAP-solution or is customer-specific programming essential.
    Any reply would be much appreciated.
    Best regards,
    Corinne

    Hi Corinne,
    Did you get anything for your requirement specific to Preference calculation with batch management. I am also looking for the same. let me know if you found something useful or if you created an enhancement to resolve this issue.
    Regards,
    Sumit

  • Is it possible to change the Costing Lot size for preference calculation?

    Hi Gurus,
    Is it possible to change the costing lot size for the preference calculation?
    Reason for my question is: We have all prices on price unit 100
    and we want to use also the price unit 100 for preference calcalation.
    But the preference calculation always take price unit 1.
    Is there any possibility to set somewhere the costing lot size for pref.calculation?
    Thanks
    Regards
    Dieter

    Does really nobody has a hint?

  • My Lightroom Preferences are missing, where can they be?

    In attempting to open LR5 beta, I had to reset preferences, but when I opened the Lightroom file the preferences were missing. The Windows search could not locate them, where have they gone?

    Prefernce folder of Lightroom in windows is : C:\Users\[User_Name]\AppData\Roaming\Adobe\Lightroom and C:\Users\[User_Name]\AppData\Local\Adobe\Lightroom

  • Alternative units preference calculation

    Hi,
    over the main transaction vx99 I can join in the part preference calculation.
    now the problem is that the calculation allways shot down with the error :
    No alternative unit of measure specified.
    In know what an alternative units is and where I should put in. But we dont need
    an alternative it is in every constallation the unit piece.
    any idea what can I do to solve this error ??
    thx and regards
    Oliver

    Hai
    Alternative Unit of Measure will be maintained in Material Master data.
    MM02 - Select any material - Enter
    Inside master u will find a Icon at the top Additional Data
    In that select Unit of measure.
    I think the problem is While ur using Vx99 ur using different unit which is not maintained in the base unit of measure.
    If ur problem solved give me points.
    Subramanian.Ramasamy

  • Billing block "Calculation missing" in sales order

    When I save sales order today, i find that billing block - 01 Calculation missing is trigger.  I have not found this block before.  What is the root cause of this?

    Hi,
    Someone has change the configuration to have the billing block automatically in your sales document type. You can check it in the transaction VOV8.
    Go in to your sales document type and see the field "Billing Block" under section "Billing". The value should be now "01". That's the reason why you get this billing block automatically in the sales order. If you don't want it to appear, please remove this entry to Blank and then try with a new sales order.
    Best regards,
    Anupa

  • Help for MediaException:Missing protocol separator

    Hi all,
    I am trying to record voice in the mobile phone and save it to a file using MMAPI functions.
    I tried out the sample demo, "MMAPIExample" given in the NetBeans 5.0 Beta 2 with Mobility Pack 5.0 Beta 2.
    I selected Simple Player->Audio Capture from default device->menu
    ->Start Recording from the emulator, after entering the record locater with "file:recording.wav", the screen will appear with the following text,
    "MMA demos wants to record an image or audio clip. Is it ok to record?". Whenever I press the button for "Yes", the emulator is hang, it didn't go ahead to start recording.
    I decided to write a MIDLET to solely test on the audio capture function with the following code:
    try {
    // Create a Player that captures live audio.
    Player p = Manager.createPlayer("capture://audio");
    p.realize();
    // Get the RecordControl, set the record stream,
    // start the Player and record for 5 seconds.
    RecordControl rc = (RecordControl)p.getControl("RecordControl");
    rc.setRecordLocation("file:voicerecording.wav");
    rc.startRecord();
    p.start();
    Thread.currentThread().sleep(5000);
    rc.commit();
    p.close();
    } catch (IOException ioe) {
    } catch (MediaException me) {
    System.out.println(me.getMessage());
    } catch (InterruptedException ie) { }
    The same situation occured as described earlier on. This time I was able to find out that a Media Exception was raised with the reason of missing protocol separator.
    I am very new to writing J2ME program and I have no idea what is protocol separator.
    Can anyone help me out with this problem?
    Million thanks,
    Siying

    Hi all,
    I am trying to record voice in the mobile phone and save it to a file using MMAPI functions.
    ->Start Recording from the emulator, after entering the record locater with "file:recording.wav", the screen will appear with the following text,
    "MMA demos wants to record an image or audio clip. Is it ok to record?". Whenever I press the button for "Yes", the emulator is hang, it didn't go ahead to start recording. and also it shows Warning: To avoid potential deadlock, operations that may block, such as networking, should be performed in a different thread than the
    commandAction() handler. i have written the following code for recording and i also want to play that recorded one :
    try {
         Player p = Manager.createPlayer("capture://audio");
              p.realize();
    RecordControl rc = (RecordControl)p.getControl("RecordControl");     rc.setRecordLocation("file:///c/WTK22/appdb/DefaultColorPhone/filesystem/root1/audio.wav");
         rc.startRecord();
         p.start();
         try {
         Thread.currentThread().sleep(5000);
         } catch (InterruptedException ie) {}
         //stopRecorder();
         } catch (IOException ioe) {
         ioe.printStackTrace();
         } catch (MediaException me) {
         me.printStackTrace();
    I am very new to writing J2ME program and I have no idea what is protocol separator.
    Can anyone help me out with this problem?
    i very thankful to them.
    my mail id:[email protected]
    byeeeeeee.

  • Preferences are missing for Time Machine,how can I fix this?

    Preferences are missing from Time Machine,how can I fix this?

    Please don't SHOUT!
    We're all users here and you'll get more help if you give us some coherrent information.
    Firstly, do you have an external Hard Drive connected to use for your Time Machine backup?
    Secondly "stacks" is not a programme; it's one method of presenting folder icons in the dock, and is accessed from the 'view options' choice which appears if you click on the folder. Right-clicking the folder will go straight to the options menu.

  • The lock icon on the network preferences is missing.

    Is there a way to get the admin authorization back? I just upgraded to Maverick. The lock icon on the network preferences is missing. Also, below is a permission verification problem.
    Group differs on “Library/Java”; should be 0; group is 80.
    Permissions differ on “Library/Java”; should be drwxr-xr-x ; they are drwxrwxr-x .
    Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
    Permissions differ on “System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/libruby.2.0.dyli b”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
    Permissions verification complete

    ijquest wrote:
    but I am able to check and uncheck "Require password immedialy..." box  and change my password with the lock icon locked. This should not happen, correct?
    Given that you are logged in as that user, and most likely the admin user of the Mac, then it makes sense that you can change your own settings. If you were logged in as a different user, then you would not have access to change the settings for this admin account.
    ijquest wrote:
    I created another post right after this one  after I checked some console logs. Are you able to search for this post by my ijquest user name? I didn't see a reference number associated with the post. I truely appreciate your help.
    For your user, I can only see the following posts which appear to have been created one and three hours ago.
    USER ACCOUNT PASSWORD CHANGE WITHOUT REQUIRED UNLOCK  LOCK ICON REQUIREMENT
    The lock icon on the network preferences is missing.

  • Accounts Preference is missing

    Just this morning I noticed that on my Powerbook G4 (running 10.4.11) the Accounts preference is missing from the System Preferences window. I'm not sure what would cause for this to happen. I have shutdown/restarted several times to see if there was a glitch, but it's still missing. I've never had this happen before. I downloaded and am using Onyx to run a clean every now and then, but I don't think this would have affected anything. I remember setting up a new admin user about 7 months ago, so I know at one time it was there. The laptop only has an admin user. I never added guests. When I start up, it always goes to the login screen where I have to enter my password to access the machine, so I know that my account info must be somewhere. Has anyone ever had this happen to them? Any suggestions?

    Welcome to the Forums!
    Never had this, but I think you need to do these 3 things in order...
    Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
    http://docs.info.apple.com/article.html?artnum=302672
    About Disk Utility's Repair Disk Permissions feature...
    http://docs.info.apple.com/article.html?artnum=25751
    The Archive and Install feature...
    http://docs.info.apple.com/article.html?artnum=107120

  • Ava/lang/IllegalArgumentException: Missing protocol separator--pls help

    hi guys
    i have encounter this error in my coding.i 'm a novice in j2me programming, so pls help me .thanks
    Uncaught exception java/lang/IllegalArgumentException: Missing protocol separator.
    i think the error is somewhere in that code.
    try{
    SocketConnection sc = (SocketConnection) Connector.open("socket://localhost:5678",Connector.READ_WRITE);
       String uri = "file:c:/commands.txt";
       System.out.println("r");
                  InputConnection conn = (InputConnection)Connector.open( uri,Connector.READ );
        int ch;
      InputStream in = sc.openInputStream();
    OutputStream out=sc.openOutputStream();
      while( ( ch = in.read() ) != -1 ){
                    System.out.print( (char) ch );
    out.close();
      in.close();
      sc.close();
    catch(ConnectionNotFoundException e ){}
    catch(IOException ioe){}i would really appreciate it if someone would advise me on it.thanks

    Change the "file:c:/..." to "file://c:/..."

  • CDs & DVDs system preferences button missing

    It seems that the button of the 'CDs & DVDs' system preferences button is missing. Where did it go or, how can I reinstall it ?
    Thanks
    Martin

    no idea - still. But what the heck.

  • Sharing Preferences panel missing

    This is probably an old issue, I just can't seem to locate it here anywhere, and Googling only produces fixes I have already tried. Some of the Macs I support (all running 10.4.11) are missing the Sharing preferences panel in System Preferences. This would not be so bad--it doesn't seem to affect performance at all--but that I cannot re-name machines without access to that panel. I have installed the ARD client, installed the CD/DVD Sharing update, both of which seem to have fixed this in the past. Not now. What's up?

    Hi jreyome, and a warm welcome to the forums!
    Could be many things, but usually preventable and caused by pre-existing OS or Disk corruption...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Transitions Preference Setting Missing

    I am using Lion on a MacPro tower and just purchased Final Cut Pro X after first using the Trial version.  I went to set my "Transitions" preferences and noticed that I am missing a choice for the transitions setting:
    It is my understanding from FCP X training videos that I should have a choice in "Transitions" "Apply transitions using" as illustrated by this image:
    How do I go about getting this choice in Preferences?

    I did a search and found this which solved the issue:
    http://www.larryjordan.biz/fcpx-missing-preference/

  • Setup -- my preferences is missing from my OEM 12c.

    Here I have 2 question on receiving the E-mails from OEM grid 12c.
    1. In my console , I am not able to see setup --> my preferences ( tab)is missing from my OEM 12c.
    Somehow I am able to set up my E-mail yesterday by going to setup -->notifcations--> my notification schedule (don't remember correctly how I did it now). Yesterday I got one test mail as well from EM server after setting up. Intentionally I didn't add the another E-mail address yesterday in the E-mail address table.
    I am not able to find a way to add another E-mail addresses to E-mail table.
    Notification Schedule > E-mail Addresses
    E-mail Addresses
         Administrator          SYSMAN
         Date          Apr 1, 2013
         Day of the Week          Monday
         Time          12:00 am - 1:00 am
         Time Zone          (UTC+00:00) Universal Time
         E-mail Addresses     <>     
         Suspended          No
    2. Today I adjusted some Metric thresholds to very low to chcek I will be eceiving the E-mails.
    I didn't receive any E-mail notifications for the metric alerts. But I am able to see the events underneath each DB incident manager -->events tab.
    What is going wrong here ? Why I am not able to receive the E-mails ?
    My OEM verison is 12cr2.
    Thanks,
    Edited by: 950103 on Apr 2, 2013 8:24 PM

    Based on the fact that you entered some data in the Manage dialog and you got an email - I would assume that the rule you setup is set only to trigger when one of the incident workflow conditions is met.
    If you are interested in getting notifications on a specific metric alert event:
    1. Create a rule, Select "Incoming events and updates to events"
    2. Select "Metric Alert" in the Type drop down
    3. Choose the radio button "Specific events of type Metric Alert" if you are interesting in choosing specific metrics. Click Add on the table that shows up on the right and follow up to add relevant metrics and the severity you are interested in.
    4. Click Next
    5. In the actions page - click "Add" , Enter your user id in the "E-mail To" text field - click continue
    6. Click Next - add a name (if you want to) and click Next to got the review page.
    7. Review the rule - click continue.
    8. Once you are back in the main ruleset page - click save (I am assuming you have the ruleset setup with the right targets etc)
    Beyond this - its a bit hard to do debugging on the forum. Feel free to open an SR and they can pull us in as needed.

Maybe you are looking for