Vector Enumeration Error under SMC

Hi Friends
I installed Solaris 10 6/06 on my AMD 64 X2 PC , while selecting system information option under SMC its reflecting "Vector Enumeration" error , what exactly it means , under sol 10 1/06 ist working fine.
Thanks
Kinshuk

This is not an answer but another request. I had the same problem and can't do anything until I find out if all the hardware is detected. Hopefully someone will reply to this thread as it was posted more than a month ago.

Similar Messages

Vector Enumeration Error Message when using smc

Hi,
Whenever I click on the System Information icon in smc, I get a small window that says "vector enumeration". No other error message/error code is shown. I did a clean uninstall and re install of the OS, but the issue still persists.
Any suggestions?
Regards,
Pritesh Ugrankar

Pritech:
I had the same symptom (platform is an HP Pavilion a200n with 1GB RAM and 2.4Ghz Celeron) and was in the prrocess of posting this reply to see if you had any luck getting past your issue. Just for jollies, I again tried the System Information pick and mine now works!
The only changes I have effected (since it was not working) were setting up a network printer (to my NetGear Firewall Router w/printer port) and getting networking working - which I had to do first. I am dual-homed and determined that Solaris10 was not detecting - has no native support for- the NetGear FA311 NIC I have wired to my router. I found driver binaries at http://homepage2.nifty.com/mrym3/taiyodo/eng/index.htm. Followed the included README, installed the driver, and I no longer get the vector enumeration error.
You may not need all the convolutions I did, but I am posting them just in case. Feels like maybe SMC just wanted networking correctly set up ???
NoahBoatman

Download error under apps. After following download steps multiple times still showing error message.

Download error under apps. After following download steps multiple times still showing error message.

Hi There,
Kindly try the below mentioned links.
Creative Cloud Help | Download Error in Apps tab of Creative Cloud Desktop Application
Creative Cloud - Download error - stubborn error
Thanks,
Atul Saini

Forms compilation Errors under Linux

Hello,
I have a main form called Tbdoctrk.fmb.
This forms compiles and runs perfectly through Oracle 9i iDS.
When transfering the fmb file under Linux, and attempting to recompile using the f90genm.sh utility, I get the following compilation errors:
FRM-18108: Failed to load the following objects.
FRM-30436: Parent window not specified for canvas.View Canvas H_TOOLBAR
FRM-30041: Position of item places it off of canvas.
Item: BUTTON_HELP
Block: VARIABLE
Form: TBDOCTRK
FRM: Unable to adjust form for output.
====
I noticed that most of the object that failed to load (1 data block object, 1 canvas and a number of property classes and visual attributes) are contained in a file called TOOLBAR.fmb.
The TOOLBAR.fmb file compiles without errors under Linux/WIndows + is located in the same folder as the Tbdoctrk.fmb file.
1) How can I resolve this issue ?
PT
PS: I tried renaming the fmb files to upper/lower case without success.

Hello,
My main form called Tbdoctrk.fmb in turn calls a form called Pre_bord.fmb in a Program Unit.
Most but not all Class and Value Attributes are included in a file called toolbar.fmb. I did not find any specific reference to the toolbar.fmb file.
However, at compile time, I find that those objects are not loaded.
1) In what part of the main form Tbdoctrk.fmb should I find any such reference to the toolbar.fmb file ?
2) How should I create those symbolic links under Linux ?
PT

BPC Diagnostic: Error under COM+ component service

Hi,
I have BPC 5.1 installed on multi server enviroment. When I run the server diagnostic i got error under COM + component service>OSoftSQL2005Admin as "Assigned: Error" "Status: Error"
Other information: OS: windows server 2003 standard edition Database: SQL server 2005.
Can anyone please help me out. Thanks in advance.

Hi Amit,
Please make sure that ASP.NET 1.1 is installed on your server including all latest patches from Microsoft and
COM+ Components ( OsoftSQL2005Admin ) should also be properly registered.
You may restart all COM+ Components or just restart the server after this operation.
Regards,
Jean

Monitor file system under SMC 3.5

Hi,
How can I monitor my file systems under SMC 3.5? Do I need to install additional add-ons? Or is this feature not supported under SMC?
TIA

The Advanced Kernel Reader, found in the ASM add-on contains the following attributes:
When installed, you can unload the "Kernel Reader (simple)" and install the full "Kernel Reader".
Filesystem Usage
     UFS Filesystem Usage
          Mount Point
          Disk Name
          Size (KB)
          Free (KB)
          Free KB(Non Root)
          % Used
          Total Inodes
          Available Inodes
          % Of Inodes Used
     VXFS Filesystem Usage
          Mount Point
          Disk Name
          Size (KB)
          Free (KB)
          Free KB(Non Root)
          % Used
          Total Inodes
          Available Inodes
          % Of Inodes Used
ASM is not a free add-on. Similar stats are found in Halcyon's Plus Pack module shown in the link below.
http://www.halcyoninc.com/products/PlusPack/help/SystemMonitor/HALSolarisSystemAlert-filesystem-h.html
iMac.

Topology parsing error en SMC 4.0 under X86

Hello, i just installed SMC 4.0 on X86, this is the firs demo, because we want to monitor 2 E25K, and 5 M5000 (monitor SPARC with another SPARC, with x86 we are doing an experiment), but after installing, the syslog shows me all the time, the next message, i understand that this message is licence related, but how i can register, and another question, i need to pay something? ......
*Jan 7 17:43:12 petersteiner topology[23253]: [ID 226607 daemon.alert] syslog Jan 07 17:43:12 topology parsing error in file://localhost/topology-license-d.x;flags=ro(13):*
**Jan 7 17:43:12 petersteiner topology[23253]: [ID 700982 daemon.alert] syslog Jan 07 17:43:12 topology *** aborting execution *****
Can anyone help me?
Thanks to all.

Hello, i just installed SMC 4.0 on X86, this is the firs demo, because we want to monitor 2 E25K, and 5 M5000 (monitor SPARC with another SPARC, with x86 we are doing an experiment), but after installing, the syslog shows me all the time, the next message, i understand that this message is licence related, but how i can register, and another question, i need to pay something? ......
*Jan 7 17:43:12 petersteiner topology[23253]: [ID 226607 daemon.alert] syslog Jan 07 17:43:12 topology parsing error in file://localhost/topology-license-d.x;flags=ro(13):*
**Jan 7 17:43:12 petersteiner topology[23253]: [ID 700982 daemon.alert] syslog Jan 07 17:43:12 topology *** aborting execution *****
Can anyone help me?
Thanks to all.

DISM error under WinPE

Hello there,
I have a problem I run the following Powershell.exe -Command start "Regional $SMS = New-Object $PCName = $SMS.Value(&quo $PCName = $PCName.Substring(2,3)
If ($PCName -eq If ($PCName -eq If ($PCName) {Start-Process I need the script But when I run it 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info [1332] [0x80070002] [1332] [0xc142011c] [1332] [0xc142011c] 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info [1332] [0x80070002] [1332] [0xc142011c] [1332] [0xc142011c] 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Error 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info 2014-04-25 05:03:31, Info The strange thing Also the log shows DISM.EXE: Executing Thanks for your help! with when I want to use DISM.exe during a Task sequence under WinPE.
scripts under WinPE: (Run Command Line Task Sequence with Package)
Set-executionpolicy remotesigned
Settings" /wait Powershell.exe -File "%CD%\Regional_Settings\Regional_Settings.ps1"
-ComObject Microsoft.SMS.TSEnvironment
t;_SMSTSMachineName")
"DEU") {$Lang = "de-DE"}
"FRA") {$Lang = "fr-FR"}
-FilePath "X:\Windows\System32\DISM.exe" -ArgumentList "/Image:C: /Set-UserLocale:$Lang /ScratchDir:C:\Windows\Temp" -NoNewWindow -Wait}
to change the "UserLocale" based of the computer name.
I get the following DISM error log:
DISM PID=1332 TID=1700 Scratch directory set to 'X:\windows\TEMP\'. - CDISMManager::put_ScratchDir
DISM PID=1332 TID=1700 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
DISM PID=1332 TID=1700 Scratch directory set to 'C:\Windows\Temp'. - CDISMManager::put_ScratchDir
DISM PID=1332 TID=1700 Successfully loaded the ImageSession at "X:\windows\System32\Dism" - CDISMManager::LoadLocalImageSession
DISM DISM Provider Store: PID=1332 TID=1700 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
DISM DISM Provider Store: PID=1332 TID=1700 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=1332 TID=1700 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
DISM DISM Provider Store: PID=1332 TID=1700 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM Manager: PID=1332 TID=1700 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
DISM DISM Provider Store: PID=1332 TID=1700 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM.EXE:
DISM DISM.EXE: <----- Starting Dism.exe session ----->
DISM DISM.EXE:
DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=x86, Number of processors=4
DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
DISM DISM.EXE: Executing command line: "X:\Windows\System32\DISM.exe" /Image:C: /Set-UserLocale:de-DE /ScratchDir:C:\Windows\Temp
DISM DISM Provider Store: PID=1332 TID=1700 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
DISM DISM Provider Store: PID=1332 TID=1700 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Loading Provider from location X:\windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Connecting to the provider located at X:\windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Loading Provider from location X:\windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Connecting to the provider located at X:\windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Loading Provider from location X:\windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Connecting to the provider located at X:\windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Loading Provider from location X:\windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Connecting to the provider located at X:\windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Loading Provider from location X:\windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Connecting to the provider located at X:\windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
DISM DISM.EXE: Attempting to add the commands from provider: WimManager
DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
DISM DISM Provider Store: PID=1332 TID=1700 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
FIOReadFileIntoBuffer:(1415): The system cannot find the file specified.
UnmarshallImageHandleFromDirectory:(511)
WIMGetMountedImageHandle:(2568)
DISM DISM WIM Provider: PID=1332 TID=1700 [C:\_SMSTaskSequence\Packages\CF10019B] is not a WIM mount point. - CWimMountedImageInfo::Initialize
DISM DISM VHD Provider: PID=1332 TID=1700 [C:\_SMSTaskSequence\Packages\CF10019B] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
DISM DISM Provider Store: PID=1332 TID=1700 Getting Provider VHDManager - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
DISM DISM VHD Provider: PID=1332 TID=1700 [C:\_SMSTaskSequence\Packages\CF10019B] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
DISM DISM Imaging Provider: PID=1332 TID=1700 The provider VHDManager does not support CreateDismImage on C:\_SMSTaskSequence\Packages\CF10019B - CGenericImagingManager::CreateDismImage
DISM DISM Provider Store: PID=1332 TID=1700 Getting Provider WimManager - CDISMProviderStore::GetProvider
DISM DISM Provider Store: PID=1332 TID=1700 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
FIOReadFileIntoBuffer:(1415): The system cannot find the file specified.
UnmarshallImageHandleFromDirectory:(511)
WIMGetMountedImageHandle:(2568)
DISM DISM WIM Provider: PID=1332 TID=1700 [C:\_SMSTaskSequence\Packages\CF10019B] is not a WIM mount point. - CWimMountedImageInfo::Initialize
DISM DISM Imaging Provider: PID=1332 TID=1700 The provider WimManager does not support CreateDismImage on C:\_SMSTaskSequence\Packages\CF10019B - CGenericImagingManager::CreateDismImage
DISM DISM Imaging Provider: PID=1332 TID=1700 No imaging provider supported CreateDismImage for this path - CGenericImagingManager::CreateDismImage
DISM DISM.EXE: Failed to access the image folder or image's windows folder.
DISM DISM.EXE: Image session has been closed. Reboot required=no.
DISM DISM.EXE:
DISM DISM.EXE: <----- Ending Dism.exe session ----->
DISM DISM.EXE:
DISM DISM Provider Store: PID=1332 TID=1700 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
DISM DISM Provider Store: PID=1332 TID=1700 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=1332 TID=1700 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=1332 TID=1700 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=1332 TID=1700 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=1332 TID=1700 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM DISM Provider Store: PID=1332 TID=1700 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
is that when I run the script manually under WinPE it works absolutely perfect.
that it runs the correct command line:
command line: "X:\Windows\System32\DISM.exe" /Image:C: /Set-UserLocale:de-DE /ScratchDir:C:\Windows\Temp

Three other comments:
- Why set the execution policy separately? Just use the -executionpolicy option when calling the script.
- Why are you using start? Start is only necessary if you need to control how something is launched. PowerShell is a valid executable so using start adds a layer of indirection that can actually cause issues with things like the current directory passed
to command-line being called.
- Why are you using DISM for this? Setting the values (dynamically) in unattend.xml is easier:
http://scug.be/sccm/2010/02/02/sccm-windows-7-deployments-amp-unattended-xml/
Jason | http://blog.configmgrftw.com

Solution to iCloud control panel 4 sign-in server error under windows 8.1x64

Potential solution for icloud 3.1 and 4.0 installation and iTune store sign-in, all showing errors or sign-in errors due to server error.
My setup is Iphone 4S upgraded to ios8, ipad Air still on 7.1.2, windows PC on Win8.1x64 and with icloud 3.1 working fine till I tried to
upgrade/install/re-install 4.0 icloud control panel after upgrade to ios8. See end of message for other alternatives I had tried.
This worked for me.
There seem to be some programmes that is conflicting with Apple's, so download this free program autoruns suggested by Apple software on Windows: May see performance issues and blank iTunes Store
Run the program and choose the the "Winsock Providers", any other programme that shows up here except Bonjour (which is used by Apple) may be conflicting with the sign-in.
Uninstall those potentially conflicting programs
Inside autoruns->Winsock Provider, right click on the conflicting programs and choose delete. This would stop the conflicting program to start up
again. Reboot the computer
Install icloud control panel, sign in
If works, reinstall those conflicting programs again and all back to normal, with iCloud control panel working
If doesn't work, my mojo not strong enough and you need to google for more help.
Other activities I googled, tried and failed
a) Adding Apple icloud program and services into the windows firewall
b) Uninstall version 4.0, re-install 3.1 (about 10 times)
c) create a new Apple ID to sign in
d) Sign out of icloud from my devices (iphone and ipad)
e) switch to Android devices

You need to edit the MSI installer and change the Launch Condition to allow iCloud Control Panel 3.1 to be installed on Windows Server 2008 R2.
First, download Orca, an MSI editor. You can get it from the Windows SDK. (Download and only check the box for "Development Tools" under Native components during installation, then go to C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin and install Orca.msi)
Launch Orca and then find the iCloud(64).msi to edit.
If using Apple Software Update, browse to C:\Users\<username>\AppData\Local\Apple\Apple Software Update and open iCloud(64).msi in Orca.
Or download iCloudSetup.exe and use a zip program (7-zip) to extract the MSI from the exe and open it in Orca.
In Orca, select the LaunchCondition table and look for the condition "(VersionNT >= 601) AND (MsiNTProductType = 1)". Change the number 1 to a number 3 so the condition should read "(VersionNT >= 601) AND (MsiNTProductType = 3)". Save and exit Orca.
Then double click on the msi and it should install successfully now.

File open error under document tab in tcode BP

Hi expert
In a report, I am reading path ,file type ,name from a text file from the presentation server. The file gives all the information related to the file uploaded on application server. File can be of any type like cfg ,doc txt, bmp .
I have to read and link the file under document tab in BP code I am able to link but not able to open the file from the link another text format is giving dump error saying format not supporting.
I am reading and linking in binary mode because i do not have another option as we can read the file in text and binary mode only.
Please suggest any solution for this .
Point will be rewarded for this.
Prem.
Edited by: Prem Kumar on Jan 12, 2009 2:39 PM
Edited by: Prem Kumar on Jan 12, 2009 2:40 PM

HI,
Just try it simply as below.
the possible reasons could be.
1) file with that name is not existing in that path
2) path name is wrong (u gave it as c:/ give it as c:\)
3) file may be open..
how ever just try with giving the file path and the output table and see how it works
*-- Read the File From PC
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME = V_FILENAME
    TABLES
      DATA_TAB = I_FILE
    EXCEPTIONS
      OTHERS   = 17.
Thanks
mahesh

Photoshop CS6 has out of memory errors under Mac OS X 10.7.4

Has anyone who has a 2008 MacBoo Pro with the NVIDIA GeForce 8600M GT 512 MB graphics card tried running Photoshop CS6 under Mac OS X 10.7.4?
On my MacBook Pro, PS CS6 launches; however, any action results in an out of memory error. The CS6 versions of After Effects, Premiere Pro and Illustrator all launch and run as expected under 10.7.4.
If I switch to my Mac OS X 10.6.8 startup volume, Photoshop CS6 runs as expected.
I have support cases open with Adobe, NVidia and Apple. Adobe thinks I need to update the display drivers. NVidia says display drivers must be provided by Apple. Apple says that the display drivers are current. The Apple support agent said that he can escalate the case if the issue can be reproduced on more than one computer.
I'd love to keep my MacBook Pro running another year or so without having to reboot in 10.6.8 every time I need to use Photoshop. I'd stay with 10.6.8, but of course iCloud requires 10.7.4.
I have not tried 10.8 yet, but it's on my troubleshooting list.
Also, PS CS6 runs fine under Mac OS X 10.7.4 on my 2010 iMac.
Thanks in advance for any feedback.
- Warren

It looks like it was indeed the display driver for the NVIDIA GeForce 8600 GT 512 MB graphics card inside my 2008 MacBook Pro.
It seems that this driver only gets installed if you upgrade from Mac OS X 10.6.7 to 10.7.4 while the startup drive is connected to the MacBook Pro itself. I had updated while the startup drive was connected to my 2010 iMac. Accordingly, I could have reinstalled Photoshop 100 times without it ever launching as expected. Having used the external startup drive with three other Apple computers (all 2010 or newer machines) with Photoshop CS6 launching as expected, I had just assumed (mistakenly) that it would work as expected with my 2008 computer.
So, this was simple enough to resolve by upgrading the OS on the external startup drive while having it connected to the MacBook Pro. In hindsight, this makes perfect sense.
-Warren

Javascript error under IE 6 on System Messenger Express 6.1

Hi ,
I am using messaging server System Messenger Express 6.1 (2005Q1) for providing webmail service. It support en and zh-TW language.
There are no problem on the webmail under english language version. However when user change his preferred language to zh-TW, after he login to the webmail and click the address book link, it has no problem on the first time access.
However when user visit other link such as Inbox and then go back to the Address book page, it encounter the following error and no display on the screen.
Line: 10
Char: 35
Error: Unterminated string constant
Code: 0
URL: http://hostname /zh-TW/pab_fs.html?&security=false&lang=zh-TW&charset=escaped_unicode
Line: 16
Char: 3
Error: 'main' is not an object
Code: 0
URL: http://hostname/zh-TW/pab_fs.html?&security=false&lang=zh-TW&charset=escaped_unicode
I have tried the same scenario in firefox and IE 5, it does not have the error above. I think user mostly will use the IE6 for browsing. Anyone has idea on it?
Thanks

One of many bugs in 6.1. Suggest upgrading to at least 6.2. Please note, 6.3 was released last week.
6.1 to 6.2 is as easy as applying several patches:
You will need to patch any JES componants that are on the same box, and the "shared componants". See the 6.2 documentation for how to upgrade.

Error under "manage process"

Hello,
when i try to see all instances of a bpm process under "manage process" in the administration workbench i get following error message:
Error occured while processing the request. Log entries are created with ID: (No log entries created due to the log level set)
Error occured while processing the request. Log entries are created with ID: 0015F24B71A20564000000070000151C
This is the log entrie
Message:     class com.sap.glx.text.TextStoreException
Date:     2009-10-20
Time:     15:48:11:218
Category:     com.sap.glx.nwa.pm.SAP_ITSAMGalaxyProcessManagerImpl
Location:     com.sap.glx.nwa.pm.SAP_ITSAMGalaxyProcessManagerImpl
Application:     sap.com/tclmitsamuimainframe~wd
Thread:     Thread[HTTP Worker [@31641945],5,Dedicated_Application_Thread]
Data Source:     j2ee\cluster\server0\log\defaultTrace_00.trc
Arguments:
DSR Transaction:     3037c0b0bd7f11de953b0015f24b71a2
Message Code:
Session:     1314
Transaction:
User:     admin
Time Zone:     +0200
CSN Component:     BC-BMT-BPM-SRV
DC Component:     sap.com/com.sap.glx.nwa.core.app
Correlation ID:     3551350000000004
DSR Root Context ID:     28C92260BD7F11DEA5200015F24B71A2
DSR Connection:     3037c0b0bd7f11de953b0015f24b71a2
DSR Counter:     0
Log ID:     0015F24B71A20564000000070000151C
Host:     MSGP558P
System:     CE1
Instance:     J00
Node:     server0
Edited by: tw18399 on Oct 20, 2009 3:55 PM

Sorry, but there is no possibilty to drill down in this entry. But before this error message , there a view other errors:
Exception while executing the statement >>STMT_SELECT_CACHED_TEXTS<<.
And:
selectAsList(), CommandProcessorException,
[EXCEPTION]
Exception while executing the statement >>STMT_SELECT_CACHED_TEXTS<<.
and:
executeCommand(), exception occured at execution,
[EXCEPTION]
and:
Additional error in after execution of command processor!
[EXCEPTION]
and:
SQL error occurred on connection MSGP558P.msg.de:CE1:SAPCE1DB: code=-1,104, state="I1104", message="[-1104] (at 4096): Too complicated SQL statement (KB-stack overflow)";
SQL statement is "SELECT "CONTAINER_ID","TEXT_ID","LOCALE","TIMEZONE","SHORTTEXT","LONGTEXT" FROM "GLX_RRH_TEXT_CACHE" WHERE "LOCALE"...
They all occured within a second.

Download error under apps in creative cloud

After ages with someone controlling my computer, i gave up because i didn't think she new what to do next. I have the error message under the Apps section Download Error get help.
Any solutions or what the problem is?
Richard

Have you tried to give permission for Adobe folder under ~/Library/Application Support
If not try below steps
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and hold command + shift+ G keys on your keypad.
In the go to folder window type exactly ~/Library and click on Go
Open Application Support and right click on Adobe folder and select get info
Under sharing and permission Click on lock and unlock it
Click on add your current user name and administrator if not added
Then give Read and Write permission for Admin, system, everyone and (your user name)
Click on gear icon and choose apply to enclosed item
Then Click on Lock
Launch Creative Cloud App

Disk Utility Error - "Underlying task reported failure on exit"

I've been having a problem opening Logic 7.1 (it will crash at startup every time) and I got the advice to repair disk permissions. Both 'verify disk permissions' and 'repair disk permissions' work, but when I go to 'verify disk' I get the following readout/error:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file 5AD8D6E5d01
(It should be 92 instead of 0)
hecking multi-linked files.",0)
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume bitmap.
,0)
Checking volume information.
Invalid volume free block count
(It should be 2859750 instead of 2859751)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I can't complete a rapair because it has this error. I'm wondering how I can fix this and if it could be the cause of the error that I get every time I open Logic. Thank you all in advance for your help!

Al
Disk Utility cannot repair this type of error.Not sure this is always the case, Al. I've had "incorrect block count" errors repaired in the past, so it must be worth a try before spending money (although I regard money spent on DiskWarrior as good insurance!)
Cam
It has to be worth you at least trying to Repair the error.
I think the first thing you should try is a Safe Boot, which will automatically run the disk checking and repair routines: Mac OS X: Starting up in Safe Mode. If the check during Safe Boot is unable to repair the disk, your system will shut down rather than continuing, otherwise it will have successfully repaired the disk.
If this doesn't work, you should try Disk Utility from the Install Disk. First read these articles: Mac OS X 10.4 Help: About testing and repairing a disk, and Using Disk Utility and fsck to resolve startup issues or perform disk maintenance.
Let us know how this goes.

Vector Enumeration Error under SMC

Similar Messages

Maybe you are looking for