Vector images not sizing proportionally even holding while holding down shift.

I use a Mac version 10.6.8 and Photoshop CS6.
When I copy and paste a vector image from Illustrator, the vector image is not be sized at 100%x 100%. It comes in at weird sizes like 100% x 98.33% (this is not consistent, it changes numbers). I have to go into the top to manually change it to 100%x100% while in Transform mode.
Also, after I change it to 100%x100% and try to scale by holding shift down, it will change again.
I'm not sure what's happening. I've been using Photoshop for quite a few years so it's not a beginner problem.
Does anyone know if there's an update to fix this problem or am I missing some setting somewhere?
Thank you.

Dr.
Simple to see if using default settings (ie Snap vector Tools is checked)
• create new file 400 x 400 px
• draw out rectangle shape, about 150 x 75 px
• go Edit>Transform Path>Scale
• now hold down Shift key as you scale shape. Look at the Width and Height percentages in the option bar as you scale. You'll notice they vary from each other. Slightly. This is different behavior in CS6 than previous versions.
It is more noticeable in a low res file. High res files will show less variation.

Similar Messages

My phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz repl wats the prblm wid it

my phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz reply wats the prblm wid it

Hi kamalkumar,
I'm sorry to hear you are having issues with your iPhone.
The article below will provide some troubleshooting steps for this issue:
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
I hope this information helps ....
Have a great day!
- Judy

How can i get my iphone 4 back up after it went dead. It had plenty of power, and it will not come up even after i hold down the home and power buttons for 30 seconds.

My iphone 4 went dead even when there was plenty of batery life. I ran through the reboot for holding down the home button with the power button and it still did not come back up. Any thoughts?

Plug it into a wall outlet for at least 30 minutes, then try resetting it again. If no respose, you most likely have a hardware issue. Make an appointment at an Apple store.

My iPhone 5 will not charge or turn on while holding the home / sleep buttons.

My phone won't charge, have tried the wall and the computer. I tried holding the home button and the sleep button at the same time and got nothing except the battery with the bolt telling me to charge.

You should try to use a different cord to charge the phone, if this is solves the issue you can call AppleCare and if your phone is under warranty they will replace the defective cord.
If you try a different cord and this does not solve the issue, you may need to contact AppleCare and get a replacement phone. If there is no physical/accidental damage done to the phone and the phone is under warrany you will receive the replacement phone for free. !
1-800-MY-APPLE (800-692-7753)

HT201412 ipod touch will not turn on even after ive held down the home and sleep buttons

I have an ipod touch that just recently started to be unresponsive! It had a good amount of battery left and then all of a sudden it turned off and now will not turn back on even after 30mins of charging. no charging screen has appeared either. ive held down both the home n sleep buttons for 10secs or more and still nothing has happened. then i held down just the home button. still nothing and then i tried holding down the sleep/wake button for a couple seconds and still nothing has happened are there any other ways of turning my ipod back on or did it **** the bed and i should get a new one? thanks

Try the remaining items here:
iOS: Not responding or does not turn on

RRI not removing routes even with outside interface down

Hi,
I'm having trouble with RRI and static crypto map.
If I configure the RRI with the outside interface down the ASA doesn't create the static route to the remote subnet.
If I bring up the interface it creates the route, but if I shutdown the interface the RRI routes never go away meaning the ASA would turn into a black hole.
Any suggestion on how to get it to remove the RRI routes if the interface is down?
I tested it with two versions with the same problem:
9.2(2)4
9.3(1)

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
#Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
#Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
Thank you for your cooperation!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

Netinstall images not showing up when holding down option key at startup

Hi,
I have setup two Netinstall images on my 10.5.5 server. On the clients I can see the two images via the 'Startup Disk' tab in System Preferences. But the images are not showing up when holding down the option key at startup. As I am getting ready to deploy to two labs of new iMacs, I would like to be able to get the Option key at Startup method to work as per the documentation.
Any ideas why these images are not showing up as they should?

I am having this problem on a 10.5.5 NetBoot server too. I can NetBoot clients by selecting a network volume in System Preferences > Startup Disk, but I can not see the network volumes when option-booting. I am having problems NetBooting while holding down the N-key too. The funny thing is that it works on new Intel iMacs, but not on Mac Pro1.1 (even with the latest firmware updates). NetBooting the Mac Pro works fine when selecting a NetBoot volume in System Preferences > Startup Disk.
Does anybody have a solution? Is this a problem with Leopard Server 10.5.5?
I am running DeployStudio Server v1.0rc9, and the NetInstall set is made with DeployStudio Assistant.
Everything looks right with my bootpd.plist and log file.
Dec 14 22:08:37 xserve bootpd(6722): server starting
Dec 14 22:08:37 xserve bootpd(6722): re-reading /etc/bootptab
Dec 14 22:08:37 xserve bootpd(6722): Loaded 0 entries from bootptab (0 bad)
Dec 14 22:08:37 xserve bootpd(6722): server name server.example.com
Dec 14 22:08:37 xserve bootpd(6722): interface en0: ip 158.36.32.190 mask 255.255.255.192
Dec 14 22:08:37 xserve bootpd(6722): bsdpd: re-reading configuration
Dec 14 22:08:37 xserve bootpd(6722): bsdpd: shadow file size will be set to 48 megabytes
Dec 14 22:08:37 xserve bootpd(6722): bsdpd: age time 00:15:00
Dec 14 22:08:39 xserve bootpd(6722): BSDP INFORM (en0) 1,0:17:f2:2:d5:9e NetBoot001 arch=i386 sysid=MacPro1,1
Dec 14 22:08:39 xserve bootpd(6722): NetBoot: (1,0:17:f2:2:d5:9e) BSDP ACK(LIST) sent 158.36.32.161 pktsize 310
Dec 14 22:08:39 xserve bootpd(6722): service time 0.000667 seconds
Dec 14 22:08:52 xserve bootpd(6722): BSDP INFORM (en0) 1,0:17:f2:2:d5:9e NetBoot001 arch=i386 sysid=MacPro1,1
Dec 14 22:08:52 xserve bootpd(6722): NetBoot: (1,0:17:f2:2:d5:9e) BSDP ACK(LIST) sent 158.36.32.161 pktsize 310
Dec 14 22:08:52 xserve bootpd(6722): service time 0.000622 seconds

Random Vectors/images color inverted in print, but not in PDF. Where does the fault lie?

Sent a PDF to the newspaper printer and some of the images had inverted/strange colors. However...
In one case I had duplicate images of a pink vector flower. SOME of the flowers were inverted, to a dark blue/black, and some were fine(pink). These were embedded vectors.
In other instances vectors, went from orange to blue/black, pink to blue/black, and yellow/white to blue black. I specify because in one vector image, a ring, the ring was yellow, but the diamond was white, and it all changed to the same blue/black in print.
Finally, there were two greyscale Tiff photographs of a pair of ladies. These are not embedded, and have not been altered at all and since the last time this paper has been printed, (which printed fine). This time, they were inverted. Nothing else on the page was inverted.
As far as I can tell, there is not a separation issue, and I have saved the file from InDesign CC to pdf using the same settings as dozens of times before. The pdf on my end looks fine. The printer says they just print what they receive, but as far as I can tell, there is no issue on our end. The fact that some duplicated images printed fine, and others did not seem to confirm this. Everything is properly linked. Has anyone else experienced this problem? Is this a pdf, InDesign, or even an adobe problem at all, or it is something on their end? I have heard of inverted colors before, but can't find a solution (especially as I can't even see the problem on my end.)
Using Windows 8, up-to-date InDesign CC, and Acrobat Pro, Illustrator CS6 ver.16.2.0 64bit
I have no idea what the printer uses.

Where does the fault lie? - in an environment where they (the newsprinter) collect up front, have no responsibility for quality and arrogantly believe, perhaps correctly, that you'll be back with another paying job in the future.
Check the file you sent via Acrobat Preflight or Output Preview for RGB elements.
Check the file you sent via Acrobat Preflight - Checks - For Transparency Used
Do any of these elements off color involve rgb or interact (with or near) any transparency?
(InDesign could show these attributes via the links panel or a Live Preflight. Both can be (probably should be in your case) changed via the PDF Export)

Images seem to lock in place while I did not fix the image on layout

When finished updating our website www.spatia.nl, several objects seem to be locked in place on layout, while the checkbox for fixing the object is not checked.
Even pages which haven't been update seem to have this similar problem with floating and locked objects.
See this image for more information.
Could someone tell me how we can solve this problem? I've tried reuploading the webpage, (the whole website and changes) but this didn't seem to fix the problem.

Hello,
Could you please do a File>Preview page/site in Browser and check if it behaves the same there or is it working fine?
Also try File>Export as HTML and check if it works fine with exported files or not.
In case it is not working fine in preview as well and the "Pin" option is not checked for the content, please send your file to [email protected]
If your file is greater than 20mb you can use something like Adobe SendNow or SendThisFile.
Please do not forget to mention link to this forum in your e-mail so that we can identify the file.
Regards,
Sachin

I can not boot my mac pro 5,1 while holding Option key

Hi,
I have a mac pro 5,1 (3.33 six cores, 10.9 OSX) running a RAID 0 on a Sonnet Technologies PCI-E Tempo SSD Pro with two Samsung 840 pro 256GB.
I would like to reinstall from a USB or recover the machine so I restarted it while holding the Option key.
It did not work. What I have is just a white screen with the mouse pointer (arrow). I tried many time but nothing change.
I restart with pressed C key, Command+Option+R....: nothing works. I reinstalled by downloading a fresh copy of OSX 10.9 but nothing helped.
So I post here in order to get solutions from the experts.
If you know what to do for my case then please help me out.
Thanks and regards,
nhvma

installing OS X to a PCIe controller often won't work. What does:
Install to a drive on SATA 2 bus, then clone it over to your RAID. And create the RAID with 10.9.
Personally I have yet to read, hear of or experience in years that booting from arrays really helps. Larger volume yes but a single SSD is fine. Even putting one like yours on the SATA II bus and use the PCIe card for graphic library, for scratch, other uses where it does help and matters.

HT1430 Have anyone experience their ipad not turning on even while plugged in?

Have anyone experience their ipad not turning on even while its plugged into the computer or wall socket?

There can be many reasons why this is occuring. Does itunes detect it? Does the computer make any noises when you plug it in? You could try holding the home button then plugging it into the computer (it will turn it on to restore mode) there are too many things that can be causing this. We need more information.

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in private browsing?

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in Private Browsing?
I'm just starting using Firefox but I won't be using it for long if I have to re-size the screen with every new location viewed.

Try this add-on
[https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level ]

IPod touch will not turn on even after charging and holding buttons

iPod touch 4th gen will not turn on. I have charged it on computer into a USB port for hours. I have held the SleepWake button together with the Home button for 10 sec, 20 sec, 30 sec, and 40 sec. I have tried releasing the SleepWake button first. I have tried disconnecting it from computer then repeating the sequence of buttons. I have tried different USB ports. I have tried reconnecting the iTouch while holding the buttons. Nothing has worked. Any suggestions?

iOS: Not responding or does not turn on - http://support.apple.com/kb/TS3281
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device)
How to reset iPod - http://support.apple.com/kb/HT1320
http://www.apple.com/support/ipod/five_rs/

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen?

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help

If you want a short list of third party repair options, here you go.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/

Photoshop Elements 13 doesn't recognize Samsumg images not jpeg images even

What have I to do, becauce Photoshop Elements 13 doesn't recognize Samsung images? I have Samsung camera so I need Photshop Elements 13 Organizer recognize Samsung images. Canon images it recognaze.

Hi,
there are two photos, the first SAM4434 is the photo which PSE 13 import
correctly, the second photo SAM4113 is which PSE 13 can't import. There is
the third enclose where is an information that PSE 13 doesn't import the
photo because the photo is on Organizer or PSE 13 doesn't recognize a file.
The information is in Finnish but the information is what I have translated
on this e-mail. PSE 13 doesn't recognize the file because it is not on
Organizer. The both photos has taken by Samsung NX200 camera, There have
never been that kind of problem by Canon camera taken photos
Best Regards,
Pertti Hynninen
Finland
2014-10-13 8:52 GMT+03:00 andaleebfatima1 <[email protected]>:
Photoshop Elements 13 doesn't recognize Samsumg images not jpeg
images even created by andaleebfatima1
<https://forums.adobe.com/people/andaleebfatima1> in Photoshop Elements
- View the full discussion
<https://forums.adobe.com/message/6818793#6818793>

Vector images not sizing proportionally even holding while holding down shift.

Similar Messages

Maybe you are looking for