Vector images

How di I remove a character from a Vector image & replace it with another character from another image?

Using what software?

Similar Messages

Hey, How do I populate my replace colors color library in illustrator? I tried to replace color on a traced/ vectorized image and when I selected and went to the color library CC said I need to use a valid username. I was already logged into my adobe acco

Hey, How do I populate my replace colors color library in illustrator? I tried to replace color on a traced/ vectorized image and when I selected and went to the color library CC said I need to use a valid username. I was already logged into my adobe account.

Can you please show a screenshot of what exactly you want to replace where?

How do I create a cut-path ONLY on the outer edge of my vector image?

Okay, I have a dilemma. This could be one of those things that is so simple when explained, but at this moment in time it has me scratching my head.
Here I have a vector image. The pink stroke is a cut path that the software I use at work recognises and cuts. (Used for vinyl decals/stickers etc). All the lines highlighted in pink is useless to me, as it would cut out each individual line.
All I need is the outer edge of the entire graphic.
Note my crudely drawn red lines that border the image, that is exactly what I need. As you can see, the paths run through the image. BUT...When I try to erase the paths using add anchor point then cut path at selected anchor points so I can remove that particular segment, the colour essentially "leaks" as it isn't a closed area anymore. Rasterizing the image destroys the quality and I would like to be able to perform this task without loss of quality.
If anybody could help, I'd be eternally grateful!
Thanks,
Ben

Ben,
As far as I can see there are three sets of pink strokes, and I guess you wish to use the outermost one and have it form one continuous path round everything and in the hole between the letters.
Presuming you have the other strokes under control, you may be able to copy everything to the top of the stacking order and then, with all the copies selected, Pathfinder>Unite to get that compound path with pink stroke and no fill, which you may then split into one path for the outside and one path for the hole if needed.

How to find out the vector images in pdf file?

I need to extract all vector(line art) images from pdf file.
Is it possible to find out whether the pdf contains vector image or not through programmatically? Kindly advice me.
Thanks,
Prabudass

Anyone please!

How do I save a JPEG that includes text as a Vector image in photoshop?

I have a design that includes some text. I need it to be saved as a vector image , photoshop pdf to send off to print. They keep telling me there is an embedded jpeg in the file. how do I fix this?
note: Im using photoshop CC, I do not have access to illustrator, indesign etc...

A pdf can contain both vector and raster data. Any images in your design would be raster. The settings for the pdf determine how to handle the raster data. One way it can compress the images is to store the images as jpg.
If the service is expecting a vector file, then there can not be any raster data in that file.
The only true way to make sure the entire file is vector is to use illustrator.
Just an fyi, even if you import an illustrator file into Photoshop, that data will be raster, because Photoshop rasterizes the data when importing it.

How to I make my animated vector images better quality when exporting to a SWF file?

I created an interactive PDF and SWF file. My animation only works on the SWF file, but the vector image is low res. On the PDF it doesn't animate (which I know,) but it's high res. However, the SWF file animated, but looks low res. Thoughts?

Changing text to an image should never be considered since there is no content for the SEO spiders and the images will slow your page download time to a crawl.
This page shows web safe fonts and also how you need to use hosted fonts if you want something different...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
The above method uses an HTML snippet and, since this is fairly cumbersome, is only suitable for adding features like special headings. It does allow you to add text shadow using CSS rather than all these wasteful PNG images.
To use hosted fonts on a whole site you would need to add CSS styles in the head of the HTML doc for every page of your site. But its not low tech and, if you could do this, you wouldn't be using iWeb!

Find raster Image & Vector image in adobe indesign using apple script?

Find raster Image & Vector image in adobe indesign using apple script?

Find raster Image & Vector image in adobe indesign using apple script?

Enlarged bounding box around imported vector images (InDesign/Illustrator CC 2014)

Hi all, I've searched the forum for an answer but can't seem to find one. Hopefully someone can help.
Ever since my upgrade to CC2014, whenever I import a vector image from Illustrator into InDesign, the image comes in with an expanded bounding box. Unlike in the old days (i.e., the moment before I upgraded), when the bounding box would exactly enclose my image with no extra white space on any of the sides.
Sometimes the bounding box is small and sometimes it's gigantic. I cannot determine any rhyme or reason why it varies. Sometimes it's wider on the sides than on the top/bottom. Other times it's gigantic on one side but not the others. Basically, it's all over the place with no consistency that I can determine.
I find it incredibly visually distracting to have these weird-sized bounding boxes around my art, and it sucks to have to constantly resize them on every imported image.
I promise there are no guides, stray points, etc. in the Illustrator files. There is absolutely nothing "invisible yet there" that would create these expanded bounding boxes.
Two samples are below.
Note on this first one that the bounding box is wider at the right than the left.
On this second sample, note that the bounding box is gigantic in general, but especially at the top, and it's smaller on the sides/bottom. Huh?
Any ideas? I desperately want this to stop. Just want a bounding box that exactly encloses my artwork after I import it.
Thank you for your ideas or suggestions,
Laurie

Hi Bob, thanks very much for this info. I figured there was a checkbox hidden somewhere...
I tried all of the cropping options and although it seems like this would be a fix, it's unfortunately not fully resolving the issue.
The option that gets me closest is "crop to art." However, as you can see from the sample below, there's still a pretty large gap at the bottom, as well as a small one at the left side. (The top and right actually are cropped to the art, as requested.)
Do you have any other suggestions of things I can try? Or does anyone else have any ideas?
Thanks again,
Laurie

No vector images in web-app for iPhone !?

Hello
I am developping a web-app for the iPhone
as the bandwith is low (in edge mode) I want to use vector images instead of bitmaps (gif, png ...)
- but flash (.swf) is not supported
- SVG is not supported, only Canvas is supported
- but no "Canvas editor" is available (I don’t want to draw icones using hundreds of javascript lines ! )
- and no "SVG,SWF -> Canvas" convertor is available
Am I wrong ?
Is there any solution ?
Is 1.1.3 now solving the problem (SVG now supported ?)
thank you for your help
Michel

additional remark:
I made some tests, a vectorized icon could be 30 times smaller (and therefore faster to load) than its ".png" version !
15ko in edge mode = about 1 second to wait ...

Random Vectors/images color inverted in print, but not in PDF. Where does the fault lie?

Sent a PDF to the newspaper printer and some of the images had inverted/strange colors. However...
In one case I had duplicate images of a pink vector flower. SOME of the flowers were inverted, to a dark blue/black, and some were fine(pink). These were embedded vectors.
In other instances vectors, went from orange to blue/black, pink to blue/black, and yellow/white to blue black. I specify because in one vector image, a ring, the ring was yellow, but the diamond was white, and it all changed to the same blue/black in print.
Finally, there were two greyscale Tiff photographs of a pair of ladies. These are not embedded, and have not been altered at all and since the last time this paper has been printed, (which printed fine). This time, they were inverted. Nothing else on the page was inverted.
As far as I can tell, there is not a separation issue, and I have saved the file from InDesign CC to pdf using the same settings as dozens of times before. The pdf on my end looks fine. The printer says they just print what they receive, but as far as I can tell, there is no issue on our end. The fact that some duplicated images printed fine, and others did not seem to confirm this. Everything is properly linked. Has anyone else experienced this problem? Is this a pdf, InDesign, or even an adobe problem at all, or it is something on their end? I have heard of inverted colors before, but can't find a solution (especially as I can't even see the problem on my end.)
Using Windows 8, up-to-date InDesign CC, and Acrobat Pro, Illustrator CS6 ver.16.2.0 64bit
I have no idea what the printer uses.

Where does the fault lie? - in an environment where they (the newsprinter) collect up front, have no responsibility for quality and arrogantly believe, perhaps correctly, that you'll be back with another paying job in the future.
Check the file you sent via Acrobat Preflight or Output Preview for RGB elements.
Check the file you sent via Acrobat Preflight - Checks - For Transparency Used
Do any of these elements off color involve rgb or interact (with or near) any transparency?
(InDesign could show these attributes via the links panel or a Live Preflight. Both can be (probably should be in your case) changed via the PDF Export)

Can I edit text in a vector image?

My apologies if this is a stupid question!
I downloaded a vector image from Shutterstock that said "Your Text Here" implying you can edit the text. I cannot for the life of me figure out how to edit the text. When I open the image in illustrator I can select the text but not edit it. Removing each piece of the letter distorts the background. Help!

Would depend on what the text is made of, but as Scott said it's most likely outlined and you are meant to use a completely new text object.
Mylenium

Pdf file when made from inDesign is not cutting vector images outside of its windows

Hello,
I have a page in illustrator full of vector images. I bring it into InDesign and crop them by putting each piece in it's own window. Then, I make a pdf. When I open the pdf in Illustrator it looks fine but when I hit the preview/artwork option, I can see that all the images from that original Illustrator doc with it. Is there any way to have just the vectors I have revealed through each InDesign window come in? The InDesign Files contains multiple pages and each window contain only ones part of that illustrator file...but all the other pieces in the illustrator file stay outside that cropped area of the window when brought into Illustrator again...anyone know how to avoid this?
thanks
babs

I just did a banner for a local plumbing contractor and used InDesign to
create it. I placed a vector drawing on the banner and masked it off
using a frame right to the edge of the banner.
I exported a PDF but the printe came back asking for an Illustrator
file. Fine, it's just one line of text anyway and the drawing so I open
it in Illy and it looks fine. Resave and the guy comes back telling me
that his RIP can't handle the masked image. All I can say is thank
heavens for the eraser tool in Illustrator. It would have taken me
forever to fix this with the pen tool.
So, apparently there are reasons (I didn't see any point in grilling the
guy about his workflow, it was a one-off and I'll likely never have to
work with him again) to crop instead of mask. So it's either the eraser
in Illy or rasterize the thing in Photoshop and crop it there.
Bob

Small Bug in Flash 8: loading swf that´s a vectorized image in many layers

Hi! There´s a small bug in flash 8. If you load a swf
that it´s a vectorized image in many layers, when you give it
an action in onLoadInit, like mc.onRelease, the mc don´t
"catch" that action. You can try loading an image (it works), a lot
of swf (it works), but with this kind of swf the actions onRelease,
onPress, etc... don´t work.
The
swf
I´ll make a different vectorized image to make it works
(if there is only one layer it works)

Seems odd it will only run once. Usually if a cache problem
you get the same
results even when you update the movie or server scripts.
If it is
http:// it is not local even if from the browser
cache.
Verify the html is validated.
Check to see if this applies to all swfs. Create a simple
hello world swf
that connects to a JSP script that returns a simple value to
Flash. If that
seems to work, then the problem is in the JSP or
Actionscripting coding.
Check you can load the JSP script repeatedly using a direct
call to it on
the browser line using
http://.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"srikanth_s_india" <[email protected]> wrote
in message
news:e6obld$lfb$[email protected]..
> Thanks for the article link.
>
> I can't provide the URL as it is within our application
which requires
> logging
> in. However, one more interesting thing about it is that
it always works
> for
> the first time (in the browser/machine) but not from the
next time.
>
> My doubt is whether it is because of the caching? When
it loads for the
> first
> time, the HTML and SWF files load from our server and
hence are allowed to
> communicate with our JSP. However, when it loads the
subsequent times, it
> probably loads from the cache and hence considered as a
local file and not
> allowed to communicate with our JSP file which is on the
Internet.
>
> Can anybody tell me how to enable a local SWF file to
load SWF files from
> the
> Internet & access URLs from the Internet in Flash 8
pluggin?
>

White outlines on a non-vector image

How do I create white outlines on a logo that is not a vector image? It's actually a psd.

are you sure you even want a white outline? it looks like they use it with the blue background as is.
http://www.wheelock.edu/Images/About/Graphic%20Standards/Wildcat_Logo.jpg
EDIT
anyway. most schools have graphic standards and they'll give them to you upon request. this school happens to post them on their site
here is a link their graphic standards for logos
http://www.wheelock.edu/about/marketing/graphic-standards#logos
if you scroll down, you'll see the team logo with a link to an AI file.
Wildcat.ai

Can I edit an preexisting vector image in PSCS5?

I know I can make a vector image in CS5, but is there a way I can import an existing vector image (ie. an .ai image) and then edit it in Photoshop?
I'm using CS5, on MacOSX Lion.
Thanks for your feedback!

If you have Illustrator then you can get the paths into Photoshop so they are editable with Photoshop's vector tools. Open the vector file in Illustrator, select the required objects and copy to the clipboard. Paste into Photoshop, choosing "Shape Layer" or "Path" when prompted.
If you don't have Illustrator and want to bring a vector file into Photoshop, you can place it in a document as a Smart Object but you won't be able to edit the vectors with Photoshop's tools.

Bitmap images to Vectored images

Is there a way really one can use to convert bitmap images into vectored images?
I ask this question in response to a problem that I have. I take photos using a camera of resolution 72 pixels per inch and then process them in a program I have written in Java. I then print cards as the output of the system processing. The picture quality I then produce is a worry. The images are blurred and they rather look like zoomed bitmap images. Its not very disgusting but its something the clients are complaining about.
I have tried editing the images in different photo editors but it still remains a question. I have tried to change the resolution of the images but still the problem persists. This the led me to thinking that the reasons could be:
1. the printer I am using is printing at a different resolution with the resolution of the camera.
2. the images are bitmaps and so since I am changing the height and width (propotionally though), that could be leading to distortion of the images slightly. Hence I am looking for a bitmap to vector image convetor.
Suggestions with regards to where I could be going wrong are very much welcome.
Thanx in advance
kernan

Is there a way really one can use to convert bitmap
images into vectored images?
I ask this question in response to a problem that I
have. I take photos using a camera of resolution 72
pixels per inch and then process them in a program I
have written in Java. I then print cards as the
output of the system processing. The picture quality
I then produce is a worry. The images are blurred and
they rather look like zoomed bitmap images. Its not
very disgusting but its something the clients are
complaining about. And what makes you think that vectorizing an image is actually an improvement?
Suggestions with regards to where I could be going
wrong are very much welcome.Get a better camera.

Vector images

Similar Messages

Maybe you are looking for