Vector mask targeting issue

With a standard pixel based layer, when you hit the 'add layer mask' button at the bottom of the layers panel, the layer mask thumbnail is highlighted and targetted - as expected.
If you hold Ctrl (PC) and hit the same button to 'add a vector mask', the vector mask thumbnail is not highlighted/targetted*
I believe it should be - my next action would be to create a vector mask.
* It is highlighted/targetted in CS5.

You are correct, this is working differently than CS5. I will check to see if this was intentional.
Thanks,
Pattie

Similar Messages

  • Again, has anyone experienced any issues concerning the auto vector mask option in Fireworks when trying to fade an image?

    I have a major issue that I have tried to resolve on many levels, to no avail. The auto vector mask pop up window is empty when I choose it to fade an image in fireworks. Can anyone please assist. Thanks.

    All those commands use Flash for their GUIs - is the Flash player installed on your system?
    Are you on Mac or Windows? It works fine for me on Windows.

  • Weird issue with Bridge CC and vector masked TIFF files

    For some reason in Bridge CC my vector masked transparent backgrounds in my tiff files are showing.  I didnt have this issue with CS6.  only way to fix it is for me to flatten my image and resave it as a tiff without the mask.  Any option i need to click on?

    We don't even know what platform (Mac or Win) or version of the OS you are running.
    Also:  Are you aware that the latest version of Photoshop is not "CC" but CC2014v14.2.2 ?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Rasterizing Vector Mask Issues

    Hello,
    I'm running into a problem with CS3- all of the sudden.
    I'm on XP running PS 10.0.1 with two gigs of ram
    so... I create a vector shape and then rasterize it.
    Until Friday, I was able to use my marquee tool to select a piece of that rasterized vector mask and then cut out the part.
    Since Friday, when I use my marquee tool to select a piece of the rasterized vector mask, and then hit control x, the selection is added to the vector mask.
    I'm sure that I, inadvertently, selected some setting or hit a keyboard short cut leaving me in this lurch, but any help would be soooo greatly appreciated.
    Thank you,
    Sabrina

    Hello Sabrina,
    Make sure your background color is black at the moment.

  • Can anybody say why In the layer menu the background color is white when opening a layer mask, and why does it automatically turns black by simply opening the layer mask properties menu? The vector mask is white anyway.

    Can anybody say why In the layer menu, the background color is white when opening a layer mask, and why does it automatically turns black by simply opening the layer mask properties menu? The vector mask is white anyway.

    Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
    That field is not for attempting to fit your entire question in there.
    Please keep this in mind next time you post.  Thank you.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How do you apply a vector mask to a folder in Photoshop CS6?

    The ways you apply vector masks in CS6 is different than in CS5.
    I knew how to apply a vector mask to a folder of layers in CS5.
    I cannot figure out how to do it in CS6.
    So my question is:
    How do you apply a vector mask to a folder in Photoshop CS6?
    And while we're at it, what are the best methods for applying vector masks to regular layers?
    Thanks.

    thomasbricker wrote:
    Im back...
    The thing is, Im not usiing the pen tool to create the vector shape. Im using the vector box tool to create a rectangle [...]
    Yes and that's why I wrote the words "vector tool" and never mentioned a pen. (Although the instructions would be exactly the same for using the Pen Tool because the Pen Tool is a vector tool.)
    which I then want to turn into a layer group mask.
    And yes, this does not work the same way as it did in CS5.
    I wish it did. : |
    Adding a vector mask to a layer or group is exactly the same in CS5.1 and CS6 on my Mac. Maybe that's done differently in CS5 than in CS5.1, but it seems unlikely.
    You have the layer or group targeted. Now draw a rectangular path after making sure the Rectangle Tool is in Path mode, and not Shape mode and not Pixel mode. Then Cmd/Ctrl-click the Add Mask button at bottom of Layers panel.

  • Photoshop CS6 Beta  |  Vector Shapes selection issue

    Hi there,
    The issue is related to selecting vector shapes. Below I'm describing the difference between Photoshop CS5 and Photoshop CS6 and showing the actual issue.
    Photoshop CS5
    Vector shape have color area and vector mask visible - http://screencast.com/t/hVB2H7ceqp
    Selecting the later do not affect the visibility of the actual shape - http://screencast.com/t/YkmJlsLRNX
    Selecting the vector mask gives us the visual representation that mask is selected - http://screencast.com/t/Iq4P9Qgp9
    Photoshop CS6 beta
    Vector shape have a single icon - http://screencast.com/t/ptBpMRYup
    When select the layer the vector mask is automatic selected too - http://screencast.com/t/dm1WjibiTZ
    The Problems
    This is frustrating because it is hard to set layer styles properly, the additional "stroke" that comes from the selected layer mask visuals mess the things up.
    Also the shortcut of coppying the vector mask is also different.
    I fould a way that solves the problem partially - http://screencast.com/t/CSKcTX3n, but after you select the actual vector path and points, it turns on automatically, which is frustrating again.
    Hey guys, you've done wonderful job with CS6 really. Congrats you are trying to incorporate real vector shapes in photoshop, but selection of the shapes in illustrator and photoshop just can't be the same.
    Please can you find a way to select vector shapes without selecting the actual vector mask too, this was perfectly developed in Photoshop CS5.
    Thanks!
    Regards,
    SK

    Thanks for the fast reply. All sorted out
    Jeanne Rubbo wrote:
    Ivan,
    Here's the post with instructions on moving or copying a shape path to another layer:
    http://forums.adobe.com/thread/979293
    As for the current selection behavior, thanks for the feedback. I can definitely see how that would be annoying, especially if you are used to the previous shape layer workflow. I can't promise any changes for this release, but I will pass it along to the rest of the team and we'll keep it in mind for future releases.
    Also, just to clarify some of the terminology, the path associated with the shape layer is called a shape path. It is no longer a separate mask, although it has much of the same behavior as the old content fill + vector mask shape layers.
    [quote]Layer selection should be just that. The layers.[/quote]
    I totally understand what you're saying, but in CS6 the path is part of the layer. It's not really comparable to any other layer types.
    Anyway, I'm not trying to dismiss your feedback or anything -- just trying to help explain what our thinking was behind the changes. Hopefully we'll be able to keep refining the behavior of the new features in the future.

  • Why does the vector selection tool (white arrow) change layer selection to another vector mask?

    I have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
    The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
    Does anyone know any resolution for this?
    I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?

    What version of Photoshop are you using????
    The White Arrow tool is the direct selection tool and it work best way you point it at a path segment line and click once.  When you do all the control points in a close path segment will be marked with little squares and the two control point adjacent to where you clicked will have handles you can adjust.
    You can also drag out a rectangle with the direct selection tool. When you do you may select many closed paths in a path a path may have many sub paths and each has a mode like add, subtract, intersect etc, and each has a stacking order like in a layer stack. So if you drag out a rectangle many paths control points will be marked and control point adjacent to crossing rectangle will have handles. Can be very confusing.
    Here are two screen capture the first on shows the layer palette and path palette.  You can see many shapes and path with sub paths and modes. I also targeted layer a vector mask. The selected the direct selection tool and in the image window I pointed at the 45 degree oval path near the top right. You cab see the four control points and two with handles.   The second screen capture  I only captured the image window. I used the direct selection tool and draged out a rectangle and you cab see many segments control points and many have handles. I have no problem selecting what I want to select

  • Vector Mask - Arrgh! (Bug or Feature?)

    I'm frustrated by some behaviors of Vector Masks. I'm asking the forum about this because I'm curious how many others have experienced these issues
    • When I'm working on a layer that has a VM, (i.e. when that layer is active), it is IMPOSSIBLE to load any other path as a selection.
    For example: I've made a layer that has both a Layer Mask and a VM. I need to load some other paths as selections in order to further modify the Layer Mask. With the LM active, I Cmnd Click on another path in the Path Palette, but it is the VM of that layer that gets loaded as a selection. The VM seems to override all other paths. The only work around is to click to another layer, load a path as a selection, and then click back to the LM of the layer with the VM.
    • If I click on a layer with a Vector Mask the Vector Mask then becomes active (lines around it). This occurs even when clicking the layer, NOT the Layer Mask or the Vector Mask (VM). Even with the VM inactive, mousing over it in the layer palette makes the VM path appear, briefly. Having the path pop into visibility is distracting when I'm trying to look at something else.
    Everyone in our studio experiences this behavior.
    What makes VM paths so dominant? Is there a pref somewhere that controls this? Is this an Open GL glitch? Is this a feature that I am using incorrectly? Or is this a documented bug?
    (Because someone will ask, "Why have both layer mask and vector mask on one layer?"
    I have both LM and VM because it gives me flexibility in editing, for instance I can have the LM hard edged, and the VM feather 10 pxl so it is easy to create a mask effect that has different qualities of edge blur within it).
    Thanks in advance for anyone's input.
    Craig
    Photoshop CS4 Extended (vers. 11)
    OS X 10.5.5
    2x2.66 Dual Cor Intel Xeon
    8GB memory

    Ginger,
    Using paths is an extremely powerful function in Photoshop and Illustrator. If you intend to do high-end work in either program learning the path tool is fundamental. It gives you the ability to create very smooth and graceful shapes. Often I find that I can create a path  on an area of a photo that is much cleaner than the shape captured in the photograph of a product. Manufacturing runs, especially preliminary runs, have defects in the mold/process that when photographed at high resolution appear objectionable. Using the Pen Tool I will draw a better shape, the shape intended by the product designer, and use that mask to clean up manufacturing errors. Since these images are used in high-end display images, the cleaned-up image is acceptable to the client whent the straight photo would not be.
    The Lasso tool is defintitely a "go to" option, but there is no substitute for the Pen Tool in making perfect selections. They can be converted into layer masks. They can have feathering applied. I often have layers with BOTH Layer Masks and Vector Masks because of the variable feathering that gives me. I can only suggest that the Pen Tool is a must-have in any Photoshop artist's tool-kit.
    Craig

  • Pasting a path automatically creates a vector mask...

    Hi, it appears that Adobe has modified the way pasting paths behaves. Prior to CC when you pasted a path it would paste as a path, as expected. Now when you paste a path it automatically pastes the path as a vector mask. Is there anyway to stop it from doing this. The only workaround I have found is to create a new path layer first and then past the path which is totally unnecessary and a waste of time. This is another slight tweak that Adobe has undertaken that has totally ruined my working process. At this rate I will be cancelling my subscription. Why meddle with and tweak things that do not need fixing? I really hope this can be solved.
    Thanks.

    There have been changes to pasting paths.  Here is what Adobe told me about it:
    The general rule is that the topmost selected path, if it exists, will get the pasted path. Otherwise if a layer is targeted a new vector mask will be made of the pasted path for that layer. Otherwise if no path or layer are selected, the work path will be set and targeted. Note a subtlety here: if a layer with a vector mask is targeted but the vector mask itself is not selected in the paths panel, a paste will replace the vector mask instead of append to it. In such a case if the user wants to append to the layer's vector mask they should select it in the paths panel first.

  • Transform Vector Mask on Set  [CS4]

    Hello,
    I have problem with transform vector mask in CS4. Its impossible to transform ONLY vector without content in set. Previously, in CS3 it was easy, just select vector mask thumbnail and you could resize/rotate/move vector only.
    Thanks.

    denniskestelle wrote:
    Hello all,
    I've jumped from CS5 to CC and I notice working with vector masks (drawing a path on a layer) works completely different.
    I've got 2 issues, I can't seem to find a solution for:
    Issue 1: When I draw a path on a layer it becomes a mask for that layer.
    Not on my machine you must be adding the path to the layer as a vector  layer mask perhaps clicking the layer mask icon. Here is what I see on my machine. Or your creating a shape layer and not drawing a path on the layer. Look at the mode in the tool option bar was you draw the path.
    Here I transformed the path. Then I change the Path mode to be of the head not the background. Then clicked the mask button in the tool option bar to add the path as a vector mask.

  • Vector mask corruption?

    For several months I have had random shapes appear in my files when using vector masks. The scrambled imagery only appears at random and at certain zooms (over 25%) and will disappear upon restart of Photoshop. If I flatten the file, it will retain the scrambled imagery, but otherwise it seems to not actually corrupt the data, just the view on screen. Any ideas? I've been fighting this for months and have replaced drives, video cards, and it still persists.

    I'm running OS X 10.6.8 on a Mac Pro quad core. 2.4 GHz processor speed. 32 GB of memory. I have a ATI Radeon HD 5770 and Nvidia Ge force 8800 GT video cards and an Eizo CG243W.
    The issue I believe has been present for about a year, I'm running CS6 which has been re-installed a couple times and is up to date. I generally only run PS, Chrome, Outlook, and iTunes. Although will end up with AI and Acrobat and sometimes InDesign on occasionally.
    My machine has also been fully wiped and the OS re-installed. We've also swapped out my data drives. There is also often a scrambled patchwork on re-draw, while opening files in PS, or zooming in. My instinct says its a video card monitor PS thing but the video cards have also been swapped out with no difference.

  • How do I move a pattern layer independent of its vector mask?

    I've created a pattern fill layer and assigned a vector mask to it. How do I move the pattern around without affecting the mask? I realize if I want to rotate the pattern I'd need to convert it to a smart object, but if I only need to adjust the pattern location there must be some way to do that without moving the vector mask along with it. A traditional layer shows the vector and raster mask layer with a lock icon, but fill pattern layers are different for some reason. Can someone "fill" me in?

    rcraighead wrote:
    Yes, I understand that. I am working with pattern layers, not layers filled with a bitmap pattern.
    That is not what your showing above in red above your showing a shape layer in CS6 a pattern fill layer with a vector mask is a cs6 shape layer. Even the icon on the layer's content in the layers palette shows its a shape layer.  You can edit the vector mask you can not unlink it. For its a cs6 shape layer.  As you noted you can first convert pattern fill layer into a smart object layer. It then acts like a normal pixel layer with an associated transform to the canvas size. Your no longer dealing with a pattern fill layer. When you rotate it you will have the same problem with the layers corners areas.  CS6 changed shape layers design they have more options then prior  versions of Photoshop and prior versions of Photoshop can not handle CS6 shape layers that used cs6 shape options like stroke, line type, and pattern fills.

  • Problem creating vector mask with Pen Tool

    Using Photoshop CS5, Mac OS 10.6.8
    I'm trying to create a simple vector mask using the pen tool to create a curved line at the top and bottom of a photo. Here's what I'm doing:
    1. Create a new layer and select it.
    2. Select Pen tool.
    3. Choose "work path" by selecting button at top menu.
    4. I draw my shape with the pen tool.
    5. Now comes the problem... I can not select this shape, or assign it a color. When I create a clipping mask, it does not recognize my path. When I throw away the layer, the shape is still there in outline only. What am I missing here? I'm familiar with doing this in Illustrator, but I don't understand how it works in PSD.
    I need some help, please.
    Thanks.

    The main thing i use paths for in photoshop is extracting objects from photos.
    Other uses include stroking paths with the paint tools. For example, if you had
    a powerline to remove, one could trace the line with the pen tool and then stroke
    the path with spot healing brush set to content aware fill.
    more info on photoshop paths:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-73ada.h tml
    MTSTUNER

  • What is the purpose of the chain (lock symbol) between a solid color layer and its vector mask?

    What is the purpose of the chain (lock symbol) between a solid color layer and its vector mask in the layer panel when creating shape layers with a shape tool? I'm just curious when locking or unlocking the solid color layer and its vector mask can make a difference.

    I don't understand what you said and your shape layer looks different then mine using CS5.
    When the chain is deselected, I can't do anything with the move tool on the shape layer. This is the only difference I can find. Making the solid color uniform or not doesn't change anything.
    Your example shows that you moved the position of the solid color, how did you do that? I can create a solid color layer and change its uniform look by applying an effect like gradient but I can't move the solid color itself around. How is this possible?

Maybe you are looking for