Vehicle quotation for multiple vehicles in DBM

HI experts,
We came across the sceanrio where the customer asked for a single quotaiton for multiple vehicle with DBM order types.
While running standard DBM transaction (/dbm/order01) we are able to create a quotation with single vehicle where as customer required single quotation to be appeared with multiple vehicles in.
Please give your valuabel suggestions.
Thanks in advance,

Hi. I'm afraid fleet sales are not supported by DBM (as more than one vehicle per quotation). A hard development should be needed to deal with that requirement. Did you try the approach of VMS?
Regards.
Pedro

Similar Messages

Assign one customer to multiple vehicles in DBM 600

Dear All,
I am trying to assign one customer to multiple vehicles in DBM by using VELOB - Execute Actions in Batch.
I created one varient for customer assignment to vehicles in transcation code VELOV.
Action - QACU.
I entered Company code, Plant, Sales Orgnisation,division and customer in varient.
Run VELOB for action QACU (Assign customer to vehicle) but system gives error "Action Assign Customer (DBM) was not executed for vehicle".
How can I assign one customer for mulitple vehicle in one attempt?
Please provide the solution.
Makarand

Hi Makarand,
You'd better develop a simple program and use the function /DBM/VM13_VEHICUST_ASSIGNMENT. This approach works.
Tell me if you need the development.
Good luck.
Pedro

Single-signon for multiple sites or sub sites

Does anyone know of some good articles/publications or suggestions for
implementing a single signon for multiple very secure internet sites in
weblogic type environments.
For example, bank1 has a internet site and bank 2 has an internet site.
Bank 2 has some cool features they want to offer bank1's customers. They
agree but, bank1 wants to present bank2 as a tab or part of bank1 site.
IN order to do this there are lots of fun things, but the things Im
interested in are how to authenticate between them and handle timeouts.
timeouts seem particularly tricky in that if I dont hit a page on bank2
for a while, it could time out its session for the guy on bank1. Also if
im in the bank2 section of the site, then bank1 could time me out as
well.
any ideas let me know.
thanks
Joel

I've been informed ;-) that a pure Java solution is also available from
Entegrity. So here are a couple of URLs for you to research
anagrammatically:
http://www.netegrity.com
http://www.entegrity.com
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
Tangosol: How Weblogic applications are customized
"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]...
Netegrity?
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
Tangosol: How Weblogic applications are customized
"Tim Funk" <[email protected]> wrote in message
news:[email protected]...
This is long winded and I tried to have this make sense, if it doesn't
just mark this as read ...
I am running into the same issue. Out of need, different applications
need to be hosted on different boxes/JVM's/web applications. I am
experimenting with a customer single sign on process which is
independent of Java but lends itself nicely to it. Here is my thoughts:
1) All applications need to run under the same domain. For example:
foo.redrose.net, www.redrose.net, bar.redrose.net, app1.redrose.net
all reside under redose.net.
2) You have a database table (secure) that contains the following:
user id, password, session id, last access time.
3) This database table contains all of the valid sessions across the
domain (in this exmaple .redrose.net)
4) There is a daemon running which runs every ?? seconds that deletes
any records older than ?? seconds/(or minutes/hours) in the
database.
5) There exist a cookie which is set to the domain level that contains
the session id.
6) The session id provides a way to obtain the id and password for the
user to authenticate to the container. For example in WL5.1SP8 there
exists: weblogic.servlet.security.ServletAuthentication.weak(...) to
authenticate to your container. By using this you will get the
capability of setting up your roles and ACLS etc in you web.xml and
weblogic.xml to handle authorization.
7) All requests to any applications participating in this philosophy
must do the following for EVERY request (or appropriate):
Even if you are logged authenticated to the container and authorized,
you may have timed out or logged out of another application. So the
database table must be checked to see if the session id exists. At the
same time, you must also update the last access time to prevent timeout.
8) If the user tries to access a different application which he has not
authenticated to yet - the user will be forwarded to a servlet whichwill:
a) Look for the cookie at the domain level
b) If the cookie is found - get the UID and PWD from database
b2) Present login form if cookie is invalid/not exists
c) Authenticate to container
d) Forward back to original page and let the container handle
authorization since you have already authenticated.
I use have encapsulated the database activity into 3 stored functions:
1) isValidSession(session_id) - Returns null or the user id and pwd
concatentated which will need split apart if needed
2) makeSession(user_id, password) - Returns a new unique session id and
creates the appropriate record
3) cleanUpSessions() - Arguements not yet determined. This will delete
any records older than a certain time. I would like to have the proc
know what to delete without being given a parameter but time to the
second level can be tricky for some DBMS's.
There is a concern of storing the user id and password in the database
but this can be eliminated with a good design to restrict access to the
database table and using encrypted connections.
Hope this helps. Hopefully - a similar philosphy will be adopted by an
application container so I may not have to worry about this and I can go
back programming business functionality.
-Tim
Joel Nylund wrote:
Does anyone know of some good articles/publications or suggestions for
implementing a single signon for multiple very secure internet sites
in
weblogic type environments.
For example, bank1 has a internet site and bank 2 has an internetsite.
Bank 2 has some cool features they want to offer bank1's customers.They
agree but, bank1 wants to present bank2 as a tab or part of bank1site.
IN order to do this there are lots of fun things, but the things Im
interested in are how to authenticate between them and handletimeouts.
>>>
timeouts seem particularly tricky in that if I dont hit a page onbank2
for a while, it could time out its session for the guy on bank1. Alsoif
im in the bank2 section of the site, then bank1 could time me out as
well.
any ideas let me know.
thanks
Joel

How to use Keychain for multiple users on one computer?

I have a new Macbook Pro with Yosemite. I just moved over from PC for my work computer and the Keychain thing is killing me! I am a social media consultant so I manage multiple accounts for multiple clients. I need a way to log in and out as them on many different platforms. The reality is that I am the only user but I log in and out of different things as if this was a public computer with multiple users.
PC allowed me a drop-down option with each login. For example the email box could be clicked and then I could select the client email that I needed to fill in. The password would then auto-populate. Is there any setting I can change to make this happen on a Macbook? I have been logging in, deleting the info in Keychain, then logging in for the next client, delete...etc.
Most password managers don't work because of this same problem. Please don't recommend a password manager app unless it can handle logging in and out of (for example)10 different LinkedIn profiles.
Any advice would be greatly appreciated!

Tanja Turtsanyi wrote:
I have a new Macbook Pro with Yosemite.
Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
Mac OS X (10.4)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Itunes for multiple family members

My situation is I've been using iTunes since its inception and built quite a library. I've been through multiple ipods and now on to iphones for multiple family members. All the while using one itunes account on separate devices for multiple family members. Now that we have iphones its become necessary to create separate icloud accounts for each family member. This creates a problem for those with new icloud accounts. The iTunes music library can no longer be shared on separate devices (that I know of). The music library and playlists I have built over years cannot be shared with those devices that now have separate icloud accounts. I am aware of "family sharing" and have set that up going forward but how do I resolve the issue of all the music and playlists that were shared when we all used one itunes account, prior to creating separate icloud accounts? I hope this makes sense. For example my wife and son no longer have access to any of the music/playlists on their iphones that they used to have prior to creating their own accounts. Even though all purchases made before and after creating separate icloud accounts were made using the same credit card.
I believe I could just go back to having the other devices sign back into my itunes account and I think that may resolve the issue but what happens to purchases that were made on the other devices while they were signed into their own accounts? Another point that comes up is that we all have gift card balances on each itunes account. This is so confusing

This is great news as I've been struggling with this issue for some time. Mainly because my wife is a little old school and likes to put music on CD's and this solves that problem. Thanks again!!
Mr Mars,
You are welcome! I hope you have achieved the expected degree of "harmony."
Family Sharing: A new way to bring harmony to your family’s digital life
Ed.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

Can I use the "same" button multiple times for multiple galleries?

OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
stop();
next_btn .addEventListener(MouseEvent.CLICK, nextImage);
var imageNumber: Number=1;
function checkNumber(): void{
    next_btn.visible=true;
    back_btn.visible=true;
    if(imageNumber==15){
        trace(imageNumber);
    next_btn.visible=false;
    if(imageNumber==1){
        trace(imageNumber);
    back_btn.visible=false;
function nextImage(evtObj:MouseEvent):void {
    imageNumber++;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();
back_btn .addEventListener(MouseEvent.CLICK, backImage);
function backImage(evtObj:MouseEvent):void {
    imageNumber--;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();

I'm still a novice with Flash myself, but I have two comments.
First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to Configure Cisco ASA 5512 for multiple public IP interfaces

Hi
I have a new ASA 5512 that I would like to configure for multiple public IP support. My problem may be basic but I am an occasional router admin and don't touch this stuff enough to retain everything I have learned.
Here is my concept.    We have a very basic network setup using three different ISPs that are currently running with cheap routers for internet access. We use these networks to open up access for Sales to demo different products that use a lot of bandwidth (why we have three)
I wanted to use the 5512 to consolidate the ISPs so we are using one router to manage the connections. I have installed an add on license that allows multiple outside interfaces along with a number of other features.
Outside Networks (I've changed the IPs for security purposes)
Outside1 E 0/0 : 74.55.55.210 255.255.255.240 gateway 74.55.55.222
Outside2 E 0/2: 50.241.134.220 255.255.248 gateway 50.241.134.222
Inside1 : E 0/1 192.168.255.1 255.255.248.0
Inside2 : E 0/3 172.16.255.1 255.255.248.0
My goal is to have Inside 1 route all internet traffic using Outside1 and Inside 2 to use Outside2.    The problem is I can't seem to do this. I can get inside 1 to use outside 1 but Inside2 uses Outside 1 as well.
I tried adding static routes on Outside2 to have all 172.16.248.0/21 traffic use gateway 50.241.134.222 but that doesn't seem to work.
I can post my config up as needed. I am not well versed in Cisco CLI, I've been using the ASDM 7.1 app. My ASA 5512 is at 9.1.
Thanks in advance for the suggestions/help

I have been away for a while and am just getting caught up on some posts. so my apology for a delayed response.
I find the response very puzzling. It begins by proclaiming that to achieve the objective we must use Policy Based Routing. But then in the suggested configuration there is no PBR. What it gives us is two OSPF processes using one process for each of the public address ranges and with some strange distribute list which uses a route map. I am not clear what exactly it is that this should accomplish and do not see how it contributes to having one group of users use one specific ISP and the other group of users use the other ISP>
To the original poster
It seems to me that you have chosen the wrong device to implement the edge function of your network. The ASA is a good firewall and it does some routing things. But fundamentally it is not a router. And to achieve what you want were a group of users will use a specified ISP and the other group of users will use the other ISP you really need a router. You want to control outbound traffic based on the source of the traffic, and that is a classic situation where PBR is the ideal solution. But the ASA does not do PBR.
HTH
Rick

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Can we creat an Apple ID for multiple users?

I work for a company where we are rolling out iPads in big amounts. The problem is that they all need an Apple ID in the training they get about the iPad they receive because they have to install MobiControl on it.
It's no problem to let them create an Apple ID at home, but they have to fill in credit card numbers once they connect at work when they try to install apps. That's the problem... Not everyone want's or has credit cards...
Maybe it's possible to create an Apple ID for multiple users???
Thanks!

iPad in Business and Education
You may find a better answer in this part of the forum, since it's meant for situations like you're in.
http://www.apple.com/support/appleid/
is also info about apple ID's.
You can make apple ID's without a credit card, you just have to jump through a couple of hoops to do it since the default is that people will always give a credit card. The key to making an ID without a credit card is that you try to download a free app first, then follow the 'make an ID' prompt. That will get you the 'none' option for payment.

How to use 1 apple id for multiple deivces

How do I use 1 apple id for multiple devices. My son just got new ipod and wants to imessage, but when he does it shows it is from me.

Thank you

Same apple id for multiple devices

I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

No, a second Apple ID will not work. iTunes can already tell them apart.
When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
Do the same with the second iPhone.

Return Code - Query for Multiple Rows as XML

Hi,
I'm executing an MSSQL stored procedure through the "Query for Multiple Rows as XML" activity in LiveCycle ES. I do this through a call statement such as this:
{ call MyStoredProc(?) }
This works great, the stored procedure always returns a record set (with or without records). I use this activity rather than "Call Stored Procedure" because I can transform the record set into XML right away within this activity. Unfortunately any exception arising from invoking this stored procedure cannot be handled within the workflow as this activity does not have an exception handler (lightning bolt). In an attempt to handle at least some exceptions we have decided to use try/catches within the stored procedures and return different error codes. Now the problem I am faced with is that there is no way to retrieve the returned code within any of the SQL activities. We don't want to have to write an execute script for each of these SQL calls. Is there any way to do this? Seems like I'm 95% there.
Thanks
Nic

Thanks for the offer, unfortunately we would need something certified by Adobe.
Nic

Vehicle quotation for multiple vehicles in DBM

Similar Messages

Maybe you are looking for