Vehicle Scheduling Error:Error when creating transport structures in live C
HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol
Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.
Similar Messages
-
Error occurred when creating transfer structure /BIC/CCGS0EC_PCA_1
Hi Experts,
While activating th transfer structure 0EC_PCA_1 i am getting the below error
Error when creating transfer structure /BIC/CCGS0EC_PCA_1 in source system N6A420
Message no. R3104
Diagnosis
An error occurred when creating transfer structure /BIC/CCGS0EC_PCA_1 as an IDoc segment in source system N6A420 .
Could any one please help
Thanks in Advance,
NityaHi,
I have a similar issue on one of my clients, unfortunately they are using PSA method already, however, somewhat interestingly when I switch to Idoc it activates fine? The log in SLG1 suggests I analyze the log in source system... when I am analyzing the log in the source system?!?!?!?! Is there another log I am missing? Any ideas anyone? I did check note 493422 however as I have other extractors that are working fine connected to the same source system I am a bit loathe to implement a global solution?
Thanks in Advance
Peter -
Error when creating transfer structure
I am trying to activate a custom Datasource, but get the below error
"An error occurred when creating transfer structure /BIC/CCNAZREPAYMENTS as an IDoc segment in source system"
Message no. R3104Hi
This is the problem. when in try to activate the 7.x Datasource or migratefrom 3.x to 7.x i getthe this error
"An error occurred when creating transfer structure /BIC/CCNAZREPAYMENTS as an IDoc segment in source system"
I need it as a 7.x datasource.
If I replicate as RSDS it comes into BW inactive as soon as I activate I get the above error. -
Error when creating Transfer structures
Dear Gurus,
I get the following error when creating the transfer structure.
<b>Error when creating transfer structure /BIC/CCBD1CL_OMAT002 in source system ERPCLNT400</b>
Message no. R3104
<b>Diagnosis</b>An error occurred when creating transfer structure /BIC/CCBD1CL_OMAT002 as an IDoc segment in source system ERPCLNT400 .
<b>System Response</b>
The action was terminated. No data was changed.
<b>Procedure</b>
Use the generation log in source system ERPCLNT400 to identify the error, and remove the cause.hi,
Refer OSS Note 147195 --- Error activating the transfer rules
Check the transfer mehtod is PSA ? and Activate Source Sys Conn again
Replicate the DS again and Activate TR (...'also check are there inconsistencies in transfer str) -
Error in executing ABAP program. Error occurred when creating dataset
hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for helpr u able to figure it out..........i got the same error .......can someone help me fix this issue
-
I am trying to share a project and after the 3% of sharing the project it appears this message.
The operation could not be completed because an error occurred when creating frame 6105 (error -1).
What can I do?? I need some help please!!You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.
-
When attempting to build a quicktime movie from my video project on final cut pro I got this message "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".
Kathy ...
Better to post your topic in the Final Cut Pro community here. -
Hi everybody,just started with FCPX and the following occured:
The operation could not be completed because an error occurred when creating frame 570 (error -1)
Result is that i can not share to my hard disk.
If anybody could help me out here....?CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.
-
I'm getting this error code in Final Cut Pro. The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it? This code comes up when exporting.
Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1. I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.
-
When trying to export a project from FCPX, I get this error
The operation could not be completed because an error occurred when creating frame 30256 (error -1).
Has anyone any ideas?
Many ThanksSwitch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.
-
Error occurs when creating a new destination in HCI OData Provision Administration
Hi,
An error occurs when creating a new destination in HCI OData Provision Administration.
Please see the screen shot in attachment.
Any help will be appreciated!
Thanks,
Li-huaIt's the same issue as in MissingResourceException when trying to create a destination. Changing the destination name should do the trick.
(still looking for the GWaaS colleagues to fix the original issue.) -
Error message when creating a Master File
I have finished editing a multicam clip of a graduation ceremony which is an hour and 27 minutes long. Clients are anxiously awaiting the DVDs/BR discs.
There are six "Rotation" and one "Ribbon" titles and 21 chapter markers in the timeline. None of the chapter markers are placed in a transition.
I'm using 10.0.8 FCPX and OS 10.6.8.
I've tried to create Master File in order to use Toast 11 titanium to make a Blu Ray disc but I've had the following message appear twice midway through the process:
The operation could not be completed because an error occurred when creating frame 152526 (error -1).
Any suggestions as to what I might do to resolve this will be greatly appreciated. Or is there is another method to create a Blu Ray disc, I'd appreciate info.
Thanks,
GaryGo to Preferences and turn off Background Rendering.
Select your project in the library and in the File menu, click on Delete project Render Files; choose All when prompted. Select your event and do the same with the event Render files. In the project use the range tool to select a short section. Try to export that as a test. Don't render before you export.
If that doesn't work, copy the project and paste it into a fresh project. Try another export test.
If that doesn't work, create a new user account.
As for Blu Ray, there is a Share preset if want to check it out. Very simple menus. And the preset can only handle single tracks.
Good luck.
Russ -
How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP
Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg -
Operation could not be completed because an error occured when creating frame 56 (error-1)
Hi
I'm trying to export a movie in motion but I keep getting the error "Export Failed. The operation could not be completed because an error occured when creating frame xx (error-1)". I've tried some of the other suggestions such as preventing app nap, changing the codec used and I've uninstalled, rebooted, and reinstalled motion. Nothing has worked so far, and it's driving me crazy!
Can anyone suggest something? I'd be most grateful.
ThanksHi GFXZen, thanks for your reply.
I actually solved by re-exporting the source video, but I'll get to that (to skip, see TL;DR). In case it helps anybody else I'll answer your questions first.
The only element present at the majority of the failure points was another video, so there weren't any others to turn off. Though when I turned off the video and exported, it actually worked (this is what led me to evaluate the source video rather than the motion project).
Adjusting the export settings did not help me much, I tried h.264, same as source (which was a .mov), and ProRes 4444: failed. Tried as a draft: failed. I didn't want to mess with any of the other render settings because to be honest, I'm not a video editor, so my experience with all of this is severely limited.
I forgot to mention in the first post that I'd already tried the export on a different machine (one far newer and more powerful): failed. Dispite googling image sequences, I wasn't really sure how this related to the video, or how to set things up so the audio was preserved, so I skipped that.
TL;DR
According to what I googled, it sounded like the video needed to be reindexed/exported/whatever, so I downloaded a program MPEG Streamclip (http://www.squared5.com/svideo/mpeg-streamclip-mac.html) 1.93b8 (as the stable doesn't support Lion upward). It's completely free, and when I ran it, worked first time. I simply opened the video and exported to quicktime, and changed the compression to Apple TIFF. That was it.
There was one unusual thing though, the file I started with was just over 1GB, but the end result was just over 4GB - but visually I couldn't see any loss in quality at all, and it worked in the motion project - which is really all that matters.
Hope this helps somebody. -
Error -1116 when creating a Sales Order via DI API
Hi All,
We have an developed EDI AddOn that creates Sales Orders in SBO 2007 PL13, in one of our clients.
This AddOn is responsible for the creation up to 100 orders each day on SBO.
However, sometimes (3 to 4%) during the Sales Order creation, the system return an error -1116 when the Sales Order is created - via oSalesOrder.Add() method.
The problem is that the order is created anyway, although this error is raised.
I've searched in the forums and it seems the solution is somehow related with SBO transactions.
However, the AddOn only created the Sales Order, nothing more.
Does any body know a solution for this problem?
Regards,
Manuel DiasHi,
see this links,
Error -1116 when creating delivery note
Could not commit transaction, ReturnCode:-1116
Regards,
siva
Maybe you are looking for
-
Question regarding material for Forms and Reports
Hi, I'm good at SQL, now that i would like to learn Forms and Reports in Database. But i dont know like where to start and how to start. Could someone please help me out like what i need to do to learn them. As i said i'm very much new to these conce
-
hi, i have a JSP. this JSP has the following code.. Relevant code snippet... <form name="myform" action="Parse.jsp" method="post" target="newWin" onsubmit="return doSubmit(this);"> <input type="hidden" name="xmldata" value=<%=array[1]%>> // array[1]
-
Is it possible to restrict repeat regions in Spry to ie. 5 or 10 records per page. I am sure we could do this before on ASP pages.
-
Dump when displaying target group
Hi, When I try to display a target group I get this error: Line types of an internal table and a work area not compatible The problem is that in method SELECT_BP_ENHANCEMENTS from class CL_DEF_IM_CRM_MKTTG_SEG_MEM_EX, the method tries to insert a lin
-
Cannot open videos (podcast, itunesU) using iTunes... when I double click a video, there's nothing happens. what should I do? Thanks in deed!