Vehicle total consumption and cost report - Fleet Management

Dear All,
I have created a Fleet object having multiple fuels i.e. Gasoline and CNG and entered transactional data using IFCU transaction. My client need to know how much Gasoline and CNG was consumed for the Fleet Object and cost incurred for the fuel consumption. In MCIZ report it shows the total fuel consumption counter reading for the vehicle regardless of different fuel types.
Is there any standard report to view the said information?
Thanks & Regards,
Saif Ali Momin

The following method may work for you
Divide the distance by the litres used to get the km/litre
Convert the km/litre to L/100 km i.e. divide 100 by km per litre
Convert km/litre to miles per gallon i.e. multiply km/litre by 2.825
Fuel conversion formula table
To convert Formula to use
km per litre to litres per 100 km divide 100 by km per litre
km per litre to miles per gallon multiply km per litre by 2.825
litres per 100km to miles per gallon divide 282.5 by litres per 100km
miles per gallon to litres per 100km divide 282.5 by miles per gallon
litres per 100km to km per litre divide 100 by litres per 100 km
miles per gallon to km per litre multiply miles per gallon by 0.354
km to miles multiply km by .62137
miles to km multiply miles by 1.6093
gallons to litres multiply gallons by 4.546
litres to gallons multiply litres by .21997
Hope this of help
Jim

Similar Messages

Sales and Costs Report

Hi All,
I have a requirement for a report in which I have to display the "sales" of the last working day and the "costs of sales" for it and also the sales and costs of sales for the total month(i.e from 1st day of the month till last working day).
I thought to use CO-PA for the costs. Is this the right option or do we have any other data sources which picks up the costs(Will any of the 0CO_OM_* extractors work?)? If the CO-PA is the correct option then which one do I need to use i.e either Cost based or Accounting based? What is the difference between them?
As the report is at day level does the CO-PA contains Day level data?
If I have to create this report I think I have to create a multiprovider with the sales and CO-PA cubes? Can we do this?
By the way, the report is at distribution channel level.
Awaiting your reply...
Thanks & Best Rgds,
Ram.

Hello Ram,
As you are telling COPA is not Installed in R/3 there is no need to think on it to implement COPA on BW side.
Anyway for information on Cost based and Account based COPA, check the following link.
Re: Costing based Vs Accounting based COPA
Costing based COPA will follow the method of COST-OF-SALES to analyse.
Next coming to your requirement of Sales & Costs of Sales..
Billing Information is sufficient.
Check with Datasource 2LIS_13_VDITM & BC Infocube for billing.
this Billing Infocube can give information on Costs of sales, Revenues..
But if you want to see <b>Costs of Open orders</b> also means you need to fetch data from Sales Order Item Level also (2LIS_11_VAITM).
In Nutshell..
2LIS_13_VDITM - You can use for Costs of Sales & Revenues etc.
2LIS_11_VAITM - Use it for Cost of Open Orders.
If you need both Sales & Open Orders Costs means go for Multiprovider (Built based on Billing InfoCube & Sales Order Infocube)
I hope this infomation helps you.
Thanks & Regards,
NK.A
Dont forget to assign points if useful.

MCIZ report - Fleet management

Hi Friends,
In MCIZ, no data exists is coming for a fleet equipment after entering the fuel and distance in IFCU.
the material is posted in the document for the consumption.
But for another fleet equipment it is updating correctly in MCIZ.
Could you please guide what i am missing?
Regards,
Alagesan M

Solved.
Measurement position assigned in "Configure Measurement document update"

Stock Material Consumption and Costing Behaviour

Dear All,
I have created a Maintenance Order and issued a stock Material on it. So, MO is carrying a cost e:g 1000.
After GRN process, the Plan cost should convert into Actual Cost but its not doing so. Can anyone guide me how can the Total Planned costs be changed into Actual Costs ??
Best Regards
BK

Hi,
Go to Tcode OIOF and check Actual var. calc is assigned or not for ur order type and plant.
regards
sunil

Material Price and Cost Report

Hi Friends,
I have
   EKKO ( Purchasing Document Header )
   EKPO ( Purchasing Document Item   )
   EINA ( Purchasing Info Record - General Data )
   A017 ( Material Info Record ) Tables
Now i want to fetch
               STPRAS ( Standard Price )
               PEINH ( Price Unit     )
   fields from MBEW ( Material Valuation ) Table
Can any one tell me How to Link MBEW Table from the above Tables ?
Points for Sure......
Regards
Srini

HI
GOOD
YOU CAN JOINING ALL THE TABLE USING THE QUERY INNER JOIN HAVING COMMON FIELD MANDT.
THANKS
MRUTYUN

CN41N and S_ALR_87013533 report not showing Production order planned cost

Hi Experts,
I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
1. CN41N repoet does not show individual material cost planned in BOM.
2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
Example :
1. CN41N report :
Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
2. S_ALR_87013533
This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
Thanks in advance.
Ashish

Hi Ashish,
I doubt whether Item level reporting in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
Please check the following links:
https://scn.sap.com/thread/1743833
(In the above thread,focus on Mr. Mohamed Rafi comment.)
http://scn.sap.com/thread/3530080
http://scn.sap.com/thread/1311820
Order cost plan in report CN41N
Display of plan cost.,&nbsp;CN41N&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&…
Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
Regards
Saurabh

Report painter- business area and Cost center

Hi All,
we have a requirement to create the Report painter report where in the Revenue will be By business area and cost of the particular cost center by Cost element.
i.e revenue by Business area against cost by department.
It it possible to use report painter to create such report?. when i was going through the report painter it does not allow me to pull the cost by department .
Best regards
Rajesh dhulipalla

Hi,
Business consolidation is for more of consolidation purpose and cost center grouping is more for management reporting purpose for cost control purposes.
Both the organizational units serve for different purposes. Consolidatied business will not have much meaning unless you go with EC-CS.
Cost Center Groups are much for control purpose and help in managerial reporting.
Business Units are part of FI Organizational Structure and Cost Centers are part of CO organizational structures.
Regards,
Ravi

Sales amount and cost amount report

Dear all,
One of my customer has sales item that comes from purchase and production ( the same item No.). And they would like to have the report of sales amount and cost amount of this item that separate amount that come from purchase and production. How can I manage to get these reports?
Thanks you very much for all ideas.
Angnam K

Hi............
Refer stock posting list report........
regards,

Report that generates total amount for cost elements/department

Dear Experts,
I have been using report GR55 in which generates the total amounts via cost centers and cost elements groups however, it displays a detailed distribution of cost rather than by department, example below.
Mining
    Labor 500
    Material 1000
Development
    Labor 500
    Material 500
While business requires a report that displays the total cost per department rather than the example above, the report should display the following example.
Mining 1500
Development 1000
Is there a report in standard SAP that generates the example above?
Appreciate your help
Jan
Edited by: UserID on Jul 20, 2011 4:48 AM

HI,
You will get the cost center wise report by using T code KSB1.
Please check and confirm.
Thanks and Regards
Binoj M D

Open PO report with GL's and Cost Centers

Hi Gurus,
Is there a report that already exists where we can run open purchase
orders not received for non-inventory items that pulls the quantity,
price, GL account code, and cost center account code?
Thanks
Anusha

Hi,
May be the requirement will not be met in a single report.Please check the t code ME2K with selection parameter as we101 which gives you the open POs for that cost center or range of cost centers.
EKPO gives price details.
and check the table EKKN for GL account and cost center for that PO.
If you want open POs check the T code ME80FN.
Regards,

PO reporting that can capture PO number, PO value and cost center

Dear SAP expert and gurus,
Would like to seek for your professional advise and consult on which report in MM that can capture the PO number, PO value and cost center.
Kindly advise.
Thank you
Regards
Leonard Tan

ME80FN is a good report that captured the PO number and amount. However, the cost center is not being captured here. is there any suggestion?
ME2K is not an ideal report to user cause, user requires the data to be shown in one line instead of 2 to 3 line.
Is there any report like ME80FN can be captured PO number, PO value and Cost Center.
Thank you
Regards
Leonard Tan

MAP and Total stock in 1 report

Hi,
For one of the reporting requirement i need to show Moving average Price & Total stock in single report. MAP is saved in cube 0COPC_C04 and Stock in cube 0IC_C03.
So i created a multiprovider on them. My report layout is bel;ow
Material   Plant   Storage location MAP total stock
Issue is that MAP is stored only at MAterial level and Plant level but not at storage location level.
and stock is at all level.
I am getting output like this:
Material   Plant   Storage location MAP total stock
MAT1      PL1    #                          10     -
MAT1      PL1     ST1                     -       20
MAT1      PL1     ST1                     -       30
User wants that MAP is same at different storage locations in a plant so MAP value should be repeated even if its same.
MAT1   PL1    #        10 -
MAT1   PL1     ST1   10    20
MAT1   PL1     ST1   10    30
How can i achieve the same....
Thanks
Dipika

You could create a characteristic hierarchy with Plant as the parent node of storage location.
Or create a structure in the query and define a cell restriction to keep the Plant MAP value against the Storage Location cells.

Batch wise actual material consumption and activity cost

hi
my client is steel industry, client requirement is heat wise actual material and machine cost. Heat is a batch number, how i can check batch wise actual material consumption and machine cost.
regards
imdad

Hi Imdad
Whats the batch definition in your case?? have you designed One batch per Prod order or One batch per GR?
If its one batch per Prod order - you can directly see the prod order.. however, chances are less for this as Steel company might be using PCC i.e. repetitive mfg
If its one batch per GR - Then you will have to track using the Confirmation no because each Confirmation will trigger the Goods Issue and Activity Confirmations...
Using Table AFRU - You can track the individual Confirmation no and also the Activity Qty confirmed....COSS / COSSD will have the Activity Cost
If any goods mvt are posted during the Confirmation, you would see a Mat Doc No populated in the field "Mat Doc"
Br, Ajay M

How to get SAP report that inculde PR number, PR amount, PO number, PO amount and cost center ??

Please help! How to get the report in SAP that include information of PR number, PR amount, PO number, PO amount and cost center in one report??
I try ME5A but th
ere are no information of PO amount.

Thank you for your help.
I have no authorize to use SQVI as I am only the user. I will use your information and ask my SAP team to help.
Thank you again (^_^)

Profitability and Cost management application not available in workspace

Hi All,
I hope somebody in this forum can help me with this.
i have built a profitability and cost management application in workspace . I have validated and deployed it sucessuflly. But when i try to open the application , i am not able to see the profitability section in the open Menu or Navigate menu of workspace.
Can somebody tell what could be the cause for this?
Some Information:
I deployed one application with "Default application group" one with "Profitabilty and Cost Management"
I created the Profitabiilty and Cost Management application Group seperately in Shared Services.
Regards,
Subramaniam Ganesan

Hi Abishek,
The issue got solved after accepting the workspace server settings. Intially it didnt show me the Profitability module on the Edit mode, but when i clicked ok ( i mean accepting) it came though. Not sure how it has happened.
But it is working now.
Thanks for your help.
Regards,
Subramaniam Ganesan

Vehicle total consumption and cost report - Fleet Management

Similar Messages

Maybe you are looking for