Veiw/extract calendars against which shipping points use them?

Hi Guys,
Really need some help on this one.
Iu2019m looking for a way I can view en-mass or extract calendars against which shipping points use them. I have been asked to change some dates for certain calendars but want to be sure that they are not used in other none related shipping points. Obviously this will cause issues! I know some do.
Currently Iu2019m stuck manually checking the shipping points individually in SPRO via >Enterprise Structure > Definition > Logistics Execution > Define etc shipping point > Define shipping point. Highlight the row and display. When I try and view any of the tables direct in SE16N (i.e. V_TVST) instead of coming up with nice neat tables I again get the SPRO data inthe above fromat and have to run through manually.
Can you help?

Just use table name TVST in SE16 or SE16N.
Regards,

Similar Messages

Output type for Delivery note missing for shipping point

Hi all,
   I have a plant setup to email delivery note which uses shipping point SGUS. Condition record is setup for this shipping point using Del Typ/Shipping Point /Plant. This uses the communication stragery ZINT.
The email works well for this shipping point. However, when delivery cannot be email using shipping point CHAL. I guess this plant has 2 shipping points (sgus and chal).
When delivery is created, output type for email is missing.   I already created condition rec
for LF/CHAL/plant 121. Still not working.
Can anyone pls provide any suggestions ASAP ?
Thanks
Joyce

Hi MdZ,
   I looked at the analysis output. ZD04 output is what i am after. Don't understand the followings:
Q1 - why the ordering in anaylsis is different than in output determination procedure. For example:
In Analysis Output: i have:
LDOO    - Output not found
MAIL     - manual output
PLOO    - Output not found
Z940    - Output found
ZBOL   - Output not found
ZD04   - OUTPUT NOT FOUND
The Output Determination Procedure as:
Step Counter   CType
10       1           LD00
12       1           ZLFX
13       0           LALE
14       1           ZBOL
20        2          MAIL
75       1           ZD04
90       1           PL00
110      1          Z940
Step 10 should be read , then step 12, and so on. Why is the ordering in procedure different than in
output analysis ?
Q2. Why did it display ZD04 not found when ZD04 appear on the delivery output as green light ? When i drill down, it show 2 access sequence. Access 10 stated Output found. Access 20 stated Output not found.
Thank you.
Joyce

Receiving Day / Shipping Point

Hi Experts!
When delivering e.g. to Spain from a German shipping point there is a calendar assigned on customer site that has no holiday at all combined with a fixed receiving day "Friday". The German calendar is assigned to the shipping point.
Because of the route (transit days = 2 days) plus 1 day pick/pack we have always on Tuesdays the material availabiltity day when the delivery starts automatically.
I realize that in week 21 (holiday on Thursday) the system calculates the Monday as material availability date and I wonder why. Obviously the holiday was considered even the material has already left Germany. In consequence the delivery is too early.
My understanding is that the settings of the shipping point should calculate only the material availability date and the goods issue date but not more. The Spanish customer is not interested in any holiday in Germany.
I can't change the setting for the shipping point because our German deliveries have to be kept in this way.
Any idea?
Kind regards,
Hartmut Kroeger

Hi, thanks for your answer, but this is not what I meant.
The customer has the goods receiving day intentionally, this is to concentrate all deliveries to him on Tuesday (all material availability dates are Tuesdays).
Therefore on Customer site everything is OK.
What I don't understand is that the material availability day was calculated here on Monday.
Even picking and packing on Tuesday would be OK, then it's sent out anyway. And the following holiday on Thursday should not have any impact on the pack-work in Germany (the '"send work" has alredy finnished then in Germany).
Therefore my understanding was that any calendar on customer site calculates the goods receiving day (here the Spanish customer) and the calender for the shipping point calculates the Material availability date resp. the Goods Issue date but not the complete transit time.
In other words: My setting in the Spanish customer has no meaning, anyway all dates are calculated based on the calendar in the shipping point, no matter what calendar is on customer site.
My problem does not depend especially on a calendar setting on customer site.
Even without a fix goods receiving day, e.g. for a requested date on Fridays we have the same problem.
In that week where a holiday is, the system calculates one day earlier even the original dates (without holiday) could be used without any danger. In fact we are delivering too early to that customer.
Regards,
Hartmut Kroeger
Edited by: Hartmut Kroeger on Jun 5, 2009 7:45 AM
Hi all...
In the meantime I got the solution!
As already explained, on customer site everything is OK, same with the shipping point. Problems I had just with the transportation times, I wanted to ignore any holidays there. This is possible by assigning in the routes directly a calendar, of course without any holidays.
So now all levels are OK for me (customer, routes, shipping point).
Regards,
Hartmut Kroeger

Multiple Picking location for a Shipping point

Hi,
Is it possible to assign mutiple picking location against a shipping point in one plant.
Currently we can assign only one storage location as picking location against a shipping point in the below bath
SPRO->LE->Shipping->Picking->Determine picking location->Assign picking location
I have mutiple storage location for a single shipping point. I want system to check any one of the storage location while creating delivery for that particular shipping point.
Eg:
Plant P1 have storage locations S1,S2,S3,S4 & shipping Point SH1,SH2.
System has to determine picking location as S1 or S2 for shippint point SH1.
Is it possible to control this by any userexit or anyother way?
This has to be applicable for STO/PO also.
Thanks

Hello,
there is user-exit:
"Determinations in the Delivery
You can use the following enhancements to control determination of the organizational units that control the picking or putaway process of deliveries:
Enhancement Function influenced
V02V0002 Storage location determination
V02V0003 Gate and staging zone determination (Header)
V02V0004 Staging zone determination (item)"
SPRO: Logistics Execution>Shipping>System Modifications-->Previous User Exits in Shipping
Line: -
You can also use Business Add-In for Delivery Processing:
Business Add-In for Delivery Processing
Use
Application component: LE-SHP-DL
You can use the Business Add-In LE_SHP_DELIVERY_PROC to influence processing of delivery data, during creation and changing of deliveries at specific points described in the interface. The BAdI methods enable you to read, write, determine, delete, and save your own delivery-related data, and to change the standard delivery data.
SPRO: Logistics Execution>Shipping>System Modifications-->Business Add-Ins in Shipping
-->Business Add-In for Delivery Processing
Andrzej

Shipping point - Inbound delivery

Hi gurus,
Which shipping point do we use in return delivery ? Can we keep the same shipping point for both
outbound delivery & inbound delivery. If we maintain different shipping point for return delivery then what is the shipping point determination for inbound delivery?
Thanks
Rakesh

Hi there,
I would suggest you to maintain different shipping point for inbound if your plant is WH (warehouse) managed. Coz incoming items will be placed at a different storage bin. If WH is not active in your plant, then same shipping point would be fine.
Define a new shipping condition for inbound scenario. Since the material is same, loading grp will anyway be the same. When maintaining the shipping point determination, propose the inbound shipping point in OVL2 with the inbound shipping conditions.
Regards,
Sivanand

Choosing shipping point when delivery is performed

Hello all,
I have the following scenario:
A sales order that contains two items. Each item has a different shipping point.
When I deliver the sales order (from VA02), the system creates an outbound delivery using the shipping point of the first item (and only delivers the first item, OK). I need to force a concrete shipping point (depending on the user, not the first item).
How can I do it?
Thanks in advance,
Ricard.

Hi,
Thank you for your answers. I do not want the both lines into one delivery (shipping points are different). I want to chose the shipping point used to delivery (Delivery is created from VA02). Now, always is the shipping point of the first item that determines the shipping point.
Example 1:
A sales order contains two items:
Pos 10: Item A shipping point 01.
Pos 20: Item B shipping point 02.
If I perform a deliver from VA02, the shipping point used to delivery will be 01.
Example 2:
A sales order contains two items:
Pos 10: Item B shipping point 02.
Pos 20: Item A shipping point 01.
If I perform a deliver from VA02, the shipping point used to delivery will be 02.
So, the first item is used to determine the shipping point. I need to determine the shipping point depending on the user. I am looking for user exits or badis... (nothing at the moment)
Thanks in advance,
Ricard.

Use of "Rounding work days" in shipping point?

Hi, Could someone please explain to me how the "rounding work days" in shipping point is used for ATP purpose (within R/3 itself)?
Let's assume that the Delivery date is coming up as 18th Nov, 2011 08:00:00 hrs in schedule line, and the rounding work days is maintained as 0.2 days. Assume that the route has 1 day for transport, and this route time is relevant as per shipping point configuration.
What would be the value of GI date/time that I should expect for the schedule line?
Do I simply convert 0.2 days to hrs in 00:00:00 format, and subtract this time for delivery date to arrive at GI date, or could any other master data come into picture for GI date calculation?
I am currently seeing GI on 17th Nov, 2011 00:00:00 hrs, and not able to understand this value of GI time.
PS: Calendar for route is a custom calendar with working time from 00:00 to 24:00 hrs on all weekdays (monday to friday), and no working hrs are maintained at the shipping point.

Hi,
If the current date is 03.11.2011.
you have maintained rounding work days 2 days. days specifyied in route is 1day.
then if you raise an order for current date.system will propose schedule lines after 3 days it means 07.11.2011.
Thank you,

Shipping point calendar

Hi all,
I am having scenario where factory calendar is having 5 weekdays. However due to this deliveries can not be picked and delivered on Sat and Sun. Schedule line could not pick the dates on saturday and sunday.
To resolve this we have two options here.
1. Change the factory calendar to 7 weekdays but it will affect the MRP process already setup in the plant. For that we can also use planning calendar. However for this master data maintenance is huge.
2. Assign a separate calendar to shipping point.
In the second option, I am not aware that whether is it possible to assign separate calendar for shipping point in SAP R3 or ECC. If it is possible, kindly let me know the config required for the same.
Thanks in advance,
Regards,
Sachin

Thanks for the answer. Actually I was unable to find out that in the shipping point detail, there is no calendar assignment.
Can u please elaborate on the second part of the answer.
Thanks in advance.
Regards,
Sachin

Export for trading materials using head-office as shipping-point

Dear Experts,
Could you please, guide me what will be the various transactions that will be used in case of *'export for trading materials from head-office*', using head-office as shipping-point?
Waiting for your guidence.
With regards,
Jhelum Roy

You have posted the question without giving proper details like whether the head office is a manufacturer or just merchant exporter.
If they are a manufacturer exporter, then no problem, normal export process you can follow adhering to Excise regulations; be it head office or marketing office, you can consider it as a shipping point.
If not, the scenario should be treated as a Third Party Exports which cannot be explained just like that here. Search google with this text and you will find some documentation on that.
thanks
G. Lakshmipathi

Can I install and boot mac os x 10.6.8 on a new mac mini model A1347 which shipped with osx 10.8.3? I need to run a custom application using Mac OS X 10.6.8.

Can I install and boot mac os x 10.6.8 on a new mac mini model A1347 which shipped with osx 10.8.3?
I need to run an application customized using Mac OS X 10.6.8 on this new mini.

Hi, not normally, but you can run a Virtual Machine, using 10.6 Server within...
Parallels...
http://www.parallels.com/
VmWare Fusion...
http://www.vmware.com/mac
VirtualBox...
http://www.virtualbox.org/wiki/Downloads

Is there any default calendar which I can use on my form and report

Hi All,
Is there any default calendar which I can use on date field on my form and report.
just by change its property like double click on date field and property calendar = yes
or any other way.
thanks
mohan

hi
create a functions something like this.i hope it helps u.
function call_calender ( f_dtm_set in date default sysdate ) return date is
l_dtm date;
l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
begin
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
then
l_list := create_parameter_list ( 'CALL_CALENDER' );
add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
end if;
copy ( null, 'global.calender_date' ); --> create a null global
call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
name_in ( 'global.calender_date' ) is not null --> if the global is not null, give the choosen item back
then
l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
end if;
erase ( 'global.calender_date' );
return ( l_dtm );
end;sarah

Which access point do i use????

ok then i know how to access the internet and live messenger when i am at home as i use my bt homehub as the access point.
but when i am away from home i dont know which access point to choose, these are the options i get -
02 MMS
02 MOBILE WEB
O2 PRE PAY MMS
O2 PRE PAY WAP
O2 WAP GPRS
O2 WAP GPRS STREAM
I am on o2 pay as you go. i think i managed to access it the other by accessing pre pay mms, but it used nearly £5-00 credit in just a few minutes.
I really need to be able to acces the internet away from home, to use live messenger and also the pre installed satnav, as it always gives the message no route found, must connect to the internet to plan route

Those with "MMS" are for sending and receiving multimedia messages (MMS = Multimedia Messaging Service).
Those with "WAP" are for "Wireless Application Protocol" and the connection go through the network operator's WAP gateways, which may limit what protocols are passed through and they might also do something to the content.
So, for regular Internet access, without knowing O2, the "O2 MOBILE WEB" is most likely to give to a straight-forward, pure Internet connection. No idea what kind of rates O2 will charge, though. Call them and ask, or check their web site.

Route vs shipping point calendar

Hi,
Can some explain what happens when you don't specify a calendar in a route. How is the overall time for for delivery calculated if it is route dependent?
What happens if you have a shipping point calendar but the pick/pack time and load time are route dependent?
what takes precedence over the other?

Thanks for the answer. Actually I was unable to find out that in the shipping point detail, there is no calendar assignment.
Can u please elaborate on the second part of the answer.
Thanks in advance.
Regards,
Sachin

Bapi for creation of delivery by using SO,shipping point,delivery creation date

Hi experts,
I am looking for bapi that takes sales order,shipping point and delivery creation date and generates delivery.
I have tried with bapi GN_DELIVERY_CREATE but i am not able to understand whether this bapi is used for inbound or outbound deliveries.If this bapi is ok then what are the mandatory fields for this bapi.
Regards,
Pankaj Jain

Hi Pankaj,
Please try to use BAPI 'BAPI_DELIVERYPROCESSING_EXEC' for creating delivery form sales order , you can pass value and create delivery.
you can refer below code, it may be helpfull for you to create delivery.
DATA: BEGIN OF t_vbap OCCURS 0,
        vbeln LIKE vbap-vbeln,
        posnr LIKE vbap-posnr,
zmeng LIKE vbap-kwmeng,
        matnr LIKE vbap-matnr,
        werks LIKE vbap-werks,
      END OF t_vbap.
DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
      WITH HEADER LINE.
DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
      WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
SELECT vbeln posnr zmeng matnr werks
       INTO TABLE t_vbap
       FROM vbap
       WHERE vbeln = v_vbeln.
LOOP AT t_vbap.
t_request-document_numb = t_vbap-vbeln.
t_request-document_item = t_vbap-posnr.
t_request-quantity_sales_uom = t_vbap-zmeng.
t_request-quantity_base__uom = t_vbap-zmeng.
t_request-id = 1.
t_request-document_type = 'A'.
t_request-delivery_date      = sy-datum.
t_request-material = t_vbap-matnr.
t_request-plant = t_vbap-werks.
t_request-date = sy-datum.
t_request-goods_issue_date = sy-datum.
t_request-goods_issue_time = sy-uzeit.
APPEND t_request.
ENDLOOP.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
     TABLES
          request      = t_request
          createditems = t_created
          return       = t_return.
READ TABLE t_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE e208(00) WITH 'Delivery creation error'.
ENDIF.
COMMIT WORK.
Regards,
Prasenjit

2LIS_12_VCITM populates the same Shipping Point and Receiving Plant

Hi Gurus,
We are using 2LIS_12_VCITM extractor which answers all delivery-related requirements. However when I checked the data in RSA3, Shipping Point and Receiving Plant are the same. So I checked some sample deliveries in table LIKP and it shows the correct shipping point and receiving plant (which are different to each other). I checked VL03N and table LIKP is giving the correct shipping points and receiving plants. Receiving Plant or LIKP-WERKS and Shipping Point or LIKP-VSTEL. My question is how this happened? Consequently, when I initialized in BW, shipping point and receiving plants are the same which should not be.
Thanks for all the help.

The data for the 2LIS_12_VCITM is not just sourced by LIKP (Delivery Header), but by LIPS (Delivery Item) too.
Plant, in this extractor, is sourced by LIPS-WERKS instead of LIKP-WERKS. The receiving plant is LIPS-UMWRK. If you require this data, you will have to enhance the structure and create the User Exit code in tcode CMOD to extract that particular data.

Veiw/extract calendars against which shipping points use them?

Similar Messages

Maybe you are looking for