Velocity on zero but can still hear note?? help

Hi all
I know this is a novice question but i cant get my midi notes volume to go really low or even silent using velocity. Im using Kontakt sampler.
I turn the velocity down to zero and i can clearly still hear the note being played. When i used halion, you turned the velocity knob up to max to acheive this. I cant seem to find a velocity knob in Kontakt to do this.
Is it a setting inside Logic that i should be changing?
Thanks
digi

Turn the modulation amount for velocity (a little slider underneath the volume knob) to 100%. It's set to something like 39% by default. Next time check the NI Kontakt forum.
http://www.native-instruments.com/forum/forumdisplay.php?f=33

Similar Messages

Iphone 5 cracked screen but worked fine for 7 months that have owned it, blue lines started appearing, now screen is black, but can still hear notifications HELP!!!

My iphone 5 was given to me by my sister in january, had a cracked screen, but has worked perfectly in the time i have owned it, recently it begain to have blue lines appear on the screen, but was still working, now screen is black and cant see anything, i know its on as i can hear all notifactions (messages, calls, emails etc) help please, whats wrong! can i still claim apple support, as i dont have warrenty papers?

There are no warranty papers, never have been for iPhones.
Take the device to Apple, an Out of Warranty replacement is $229.
Warranty does not and has never covered damage. The device has suffered damage (cracked screen).

My ph. display is gone but can still hear it ringing. what do I do?

my ph. display is gone but can still hear it ringing. what do I do?

Make an appointment at the Genius Bar at your local Apple Store or at your local authorized repair center.
Best of luck.

Closed website but can still hear the video feed.

any idea what could be wrong? I opened QVC and watched something. I closed the web browser but I can still hear the program, its driving me nuts. How do I make it stop?
Post relates to: HP TouchPad (WiFi)

When in doubt, reboot! ;-)
Most glitches can be solved this way.
Press and hold both the Power switch and center button for at least 15 seconds. This will restart the device.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Don't know what happened to my iPhone 4 screen is completely black but can still hear when I get email notifications, Siri still works, and can hear music?

IPhone 4 screen is completely black
can still hear when I get email notifications
Siri still works and can hear my music
what could have gone wrong?

try to make a hard reset (home button +power button for 15seconds) then restore by itunes.this is called DFU mode,once you done,can only restore the device by itunes!let me know if it works

Presonus Firebox problem: I can see the audio levels but can't hear. Help!

Searched in the forums to what I think is a basic issue, but couldn't find anyone with an answer...
I have audio routed into my firebox from an external mixer. I can see the audio meter in the "in" sound panel of system preferences moving but I can't hear sound coming out of my soundsticks.
Audio routed out of my computer into external amp/stereo setup is audible, however.
Can anyone help me figure this out so I can move and and start setting Firebox up with Logic? LOL
My hardware specs (I'm running 10.4.11):
Hardware Overview:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.5 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.5f1
Serial Number:
Sales Order Number:

Your memory serves you well.
Yes, line outs from the mixer are hooked up to line ins 3&4 on the back of the firebox. What I can't figure out is that the Sound Panel of System Preferences shows a good input level, whereas the meter in Logic shows nothing (rec is enabled and blinking). If I switch cables to the 1&2 instrument ins on the front of the Firebox, I get levels in both Sys Prefs and Logic. I'm thinking, the problem can't be the Firebox, because the computer sees the signal either way. I'm running Logic 6.0 Platinum BTW.
I find Presonus and their manual to be lacking. They take days to write back with curt responses... Either they don't have enough people or the Firebox is not expensive enough for them to devote to customer service... I don't know

Deleted part of a recording but can still hear it!

It's very weird; there's just space where the piece I cut used to be but it's still playing the sound; I muted all the other tracks; help!

Sorry about that I have no more ideas. I hope someone else can help you

Green screen on videos, but can still hear audio

I just got this laptop today as a christmas present, i was watching netflix via the windows app and the screen urned green the audio still plays but the pictue is green i tried netflix via internet explorer and youtube but everything i use has the same problem its a brand new comp there are no updates and i have tried restarting it.
Product name:HP Pavilion 15 Notebook PC
Product number:K4D83EA#ABU

Hi,
Perform a clean install Flash Player may help:
http://helpx.adobe.com/flash-player/kb/clean-install-flash-player.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Ipad Screen Black but can still hear locking sounds etc.

i just got my ipad today,and i was playing a game then right in the middle of it the screen goes black but looks like its shut down ive tried everything to get it to come on an nothing. i dont know if the screen has went out or what. any suggestions on how to fix this problem? and i purchased it somewhere they don't take returns. so please someone help.

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

I accidently dropped my iphone from about 15 feet in the air, had an otterbox gel case on it but phone will not come on, I can still hear the voice controls and will play music randomly by pushing the center bush on phone any clues on how to get phone wor

I recently dropped my iphone 4 from about 15 feet in the air, had an otter box gel case on it and it did not break the screen, but it will not come on, no back light but can still hear the voice contorl and randomly hear music when I push the center button, I have it password locked but can't see to unlock, any help out there

Just guessing here, but dropping your phone is probably the reason your screen or backlight doesn't work.
Only solution I see is to take it to Apple and buy and out of warranty iphone 4.

Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M.

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My ipod touch brightness just went to zero after charging it. i've tried adjusting it to 100% but it still does not changed. can anybody help me solve this problem? thankS!

my ipod touch brightness just went to zero after charging it. i've tried adjusting it to 100% but it still does not changed. can anybody help me solve this problem? thankS!

Have yu tried the standard fixes:
- Resetting:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPOd via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod
- Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem

My iPhone 4s screen has gone black but i can still hear my messages coming through but I have also broke the button at the top of my iPhone what should I do?

My iPhone 4s screen have gone black but I can still hear messages coming through. Also I have broke the button at the top of my iPhone so I can't turn it off and back on again? What should I do?

Try plugging it it to see if the screen comes on. If not then you're screen is damaged.

I installed New version and now I cant see videos but I can still hear them.

I installed New Version and Now I cant see videos but I can still hear them. I have Tried everything to fix the Problem. HELP PLEASE!!!!

Hello
I have a little bit different problem but its close to this.
I have installed the .10 version and now i cant see any Video on youtube. And it does not play any sound. It not opens anything with flash player.
I deinstalled and rebootet the player. I installed the new version again. 10 times....
I also tried an old version. The 2 older versions. No change -.- its really annoying.
can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
i cant see that animation... but in the help is NOWHERE written what u should do if you cant see that....

Velocity on zero but can still hear note?? help

Similar Messages

Maybe you are looking for