Vendor 0000100301 not intended for purch. org
HI all,
While creating shopping cart, I am getting the message "Vendor 0000100301 not intended for purch. org" please advise.
Regards
SATYA
Hi Satya
some cross check points..
learnt that you procure for limit item.
(1)execute this FM
BBP_GET_CATEGORIES_F4
give u r user as input USERXX and EN
are you geting out put as your product category which you are trying to procure.
and
(ii) when you do vendor search. o 5XXXXX (are you geting like purcha organisation). if not why.
regards
muthu
Similar Messages
-
Vendor not intended for purch. org.Purchase Deportment
Hi Gurus
Whenever we are trying to create the SC with source of supply with one user we are receiving the error message as "Vendor XYZ not intended for purch. org. XYZ Purchasing Department ".
Please suggest.
Thanks in advance.
Thanks & Regards
SadaDear,
I like to suggest the below to check once (as i found on web):
In SAP SRM 5.0 (SRM Server 5.5), the "shop with limit" functionality is a standard capability.
There is really no special configuration required for "shop with limit" as opposed to the "describe requirement". As long as u specify the vendor (if known), acct. assignment (if known), the corresponding cart is created.
Unfortunately, you have not provided the complete error on the Vendor, but I'm assuming it is: "Vendor not intended for purchasing organization". This is usually the case if the Vendor Organization does not have a purchasing organization assigned. Check the BUK attribute for the vendor org in PPOSV_BBP and also make sure the purchasing organization is assigned to the corresponding company code organization unit in PPOSA_BBP.
Regards,
Syed Hussain. -
Supplier ******* not intended for purch. org error in S Cart
Hi - We have set up a Dev SRM system using Extended Classic Scenario
When we create shopping carts and we try to assign a vendor we get
message Supplier A111111 not intended for purch. org.
The vendor exists in our ECC 6.0 system under purchase organisation SD01
The vendor exists in our SRM 7.0 system under local purchase
organisation 50000006
Vendor exists in SRM table BBPM_BUT_FRG0061 under the local purchase
organisation 50000006
The user PAULSMITH is also assigned to the correct organisation element
Reading forums this seems to have happended to other clients but i
could not find a resolution on SAP marketplace or SAP community network
I would appreciate an early response as we are trying to get the system
ready for a customer demonstration.
kind regards
PhilHi
Thanks for the reply much appreciated - i have saved my shopping cart but at item level it does not show my purchase organisation field on any of the tabs at item level. Plant, Company Code & Storage Location as listed in the screen templates
So i checked my configuration settings on the org structure - our cookbook said to enter the backend purchase organisation on the root level for the purchasing department - I took this entry outand now the correct SRM org structure purchase organisation is visible in the shopping cart
Thank you for your help
kind regards
Phil -
Line 1: Supplier 0000100405 not intended for purch. org
Hi All,
I am facing one issue in shopping cart, when i clicked on check button, system throwing an error as "Line 1: Supplier 0000100405 not intended for purch. org" I have replicated this vendor from ECC & have given the right vendor root org while replicating the same. And in Vendor root Org i have assigned my CC.
How to resolve this error ?
regds,
CBHi CB,
Have a look at the below thread.
Supplier XXXX not intended for purch. org.
Did this help you solve the issue?
Regards,
Nikhil
Edited by: Nikhil RGupta on Mar 4, 2011 7:11 AM -
Supplier not intended for purch. org.
Hi Experts,
I have a problem during creating the shopping cart. We're implementing registration of supplier scenario with SUS(sus system is in different client of SRM) We've succesfully registered the supplier.But while i'm creating shopping cart, system gives error message " Supplier 0000000272 not intended for purch. org."(272 is SUS registered supplier). I've checked business partner from the manage business partner transaction(from the web) and i can see related purchasing org. record(i'm trying to create shopping cart for standalone scenario). I've checked customizing settings for product category. Also tried to create shopping cart with another supplier. But got same error. can you please help?
Regards,
FıratHi Muthu,
My vendor group attributes are:
Accounting System for Vendor VENDOR_ACS T90CLNT090
Catalog ID CAT
Company Code BUK 3000 T90CLNT090 ( ECC Backend)
Company Code BUK 3000 SRMCLNT001(SRM system)
Current ITS for an External Partner EXT_ITS http://arete05.arete.com:8000/sap/bc/gui/sap/its/
Current ITS of User ITS_DEST
Local Currency CUR USD
System Alias for Vendor VENDOR_SYS SRMCLNT001
System Alias for Vendor VENDOR_SYS T90CLNT090
Tolerance group TOG
my organizational attributes of local purchasing organization are:
Account assignment category KNT AS
Account assignment category KNT CC
Accounting System for Vendor VENDOR_ACS
Approver for Value Limit SLAPPROVER
Asset Class ANK
Asset Subnumber AN2
Attachment AN1
Catalog ID CAT ros_prescreen
Commitment Item ACC_CMITEM
Company Code BUK 3000 SRMCLNT001
Company Code BUK 3000 T90CLNT090
Cost Center CNT 1000 T90CLNT090
Cost Center CNT 4140 T90CLNT090
Current ITS for an External Partner EXT_ITS
Current ITS of User ITS_DEST http://arete05.arete.com:8000/sap/bc/gui/sap/its/
Default printer PRI LP01
Delivery address ADDR_SHIPT
Document Type in R/3 System BSA EC T90CLNT090
Document Type in R/3 System BSA PO SRMCLNT001
Flag: Forward Work Item FORWARD_WI
Funct. Area ACC_FCAREA
Fund ACC_FUND
Funds Center ACC_FCENTR
Generic Account Assignment (Standalone) STR
Grant ACC_GRANT
Invoice Recipient Address ADDR_BILLT
Local Currency CUR USD
Maintenance plant PM_SWERK
Movement type BWA 201 T90CLNT090
Network NET
PM Material Group PM_WGR
PM Plant of Component PM_WRK
PM Purchasing Group PM_PUR_GRP
PM Purchasing Organization PM_PUR_ORG
PM: Proposed G/L Account PM_GL_ACCT
Phase PM_IPHAS
Planning Plant PM_IWERK
Plant for Work Center PM_ARWRK
Plant of Responsible Work Center PM_VAWRK
Request ANR
Request type PM_AUART
Requisitioner REQUESTER
SAP Smart Forms: Company Logo SF_GRAPHIC
SAP Smart Forms: Footer SF_FOOTER
SAP Smart Forms: Header SF_HEADER
Sales Order AUN
Sales Order Item APO
System Alias SYS SRMCLNT001
System Alias for Accounting Systems ACS SRMCLNT001
System Alias for Vendor VENDOR_SYS
Tolerance group TOG
Transaction Type: Contracts CT_PROC_TY
Transaction Type: Create PO Manually DP_PROC_TY EC
Transaction type: Description TEND_TYPE
User role ROLE SAP_BBP_STAL_EMPLOYEE
User role ROLE SAP_BBP_STAL_SECRETARY
User role ROLE SAP_BBP_STAL_VENDOR
WBS Element PRO
Thanks in advance
Fırat -
Error vendor is not intended for p org
HI,
When an user ordered the shopping cart anError " Vendor xxx is not intended for purchasing org.xxxx., came in. Vendor was existing in the vendor organization. Can some body let me know what could be the problem, and what are all the attributes that should be provided to vendor and purchasing org.
Thank you,
ManyamHi Manyam,
Please check in transaction BBPMAININT (equivalent to BP) for the vendor BP:
1. Under "Vendor Data" tab
2. Check that field "Purch. Org. ID" contains the purchasing org you are trying to create shopping cart for. There should be data maintained for your purchasing org. If not then maintain.
Attribute CAT is not relevant to the error.
Regards,
Paula. -
Vendor Not intended for Purchasing org.
Dear Gurus,
While creating a SC i am getting a following error:
"Vendor 0010000007 not intended for purch. org. 50000636"
Full points for correct answer...
Thanks in advance
Rgds
SriRaMHi
Which SRM Version are you using ?
<b>Please go through this -></b>
Re: vendor not intended for a puchasing org
SAP OSS Note 1026168 - Vendor &1 not intended for purch. org. &2
Re: Error - Vendor XYZ is not intended for POrg ABC
vendor not intended for a puchasing org
Re: About BBPUPDVD and BBPMAININT
Re: vendor not intended for a puchasing org
Local Purchase Org
Hope this will definitely help.
Regards
- Atul -
Vendor not inteded for Purch. Org.
Dear all,
in ECS SRM 5.0 I am facing an error with some PO:
In transaction process PO (BBP_POC) I can not create a PO due to the message and PO remains in status held: Vendor not intended for purchase organisation XXX
In fact the error message is correct as the vendor is not open for this purchase organization. But even if I change PORG and PRGRP to the good organisations for which the vendor is open, I still get the same error message. The new selected purchase organization and group is not taken into account.
If I check the relevant tables with BBP_PD, the good purchase organization and group is stored.
Some idea?
Thanks in advance
ADhi,
You have to maintain P.Org data for the vendor in "Manage Business Partners".
In the change mode, maintain P.Org in Vendor Data Tab.Also you have to link the vendor with the backend (R/3) vendor.
In the "Vendor Data" tab of the Manage Business Partners there is Vendor Purchasing Data where you maintain P.Org, P.O Currency etc and Link to Back end system where you maintain the back end logical system and the corresponding back end Vendor who is responsible.
See these related threads for more pointers:
SAP OSS Note 1026168 - Vendor &1 not intended for purch. org. &2
Error vendor is not intended for p org
Vendor Not intended for Purchasing org.
BR,
Disha.
Do reward points for useful answers. -
Vendor not intended for a puchasing org
Hi Experts,
While creating a SC, We are getting the following error of "Vendor xxx not intended for a puchasing org yyyyy". We are using the EBP3.0. I will appreciate your help.
Thanks,
J Kumar.Hi
Give more details aboit your system version and support packs. ? What error message in detail are you getting ?
Is your user assigned to the PPOMA_BBP org structure ?
For using BBPMAININT, you must have the required roles
<u>Here are few links to go through -></u>
http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/b8/92303fdcf66d37e10000000a11405a/frameset.htm
Few SAP OSS Notes to check out ->
Note 416398 External business partner: Field control incorrect
Note 864221 EBP 4.0+: Performance location
Note 635027 EBP business partners: Hiding screens/templates
Note 357201 BBP 2.0B: Business partner <--> vendor mapping
Note 308106 Collective note: manage external business partners
Do let me know.
Regards
- Atul -
Vendor is not defined for purchase organization
Dear Friends,
I am receiving this message :
"vendor is not defined for purchase organization "
What has to do in the system to avoid this message ?
Regards
MarcoHi,
This is not a config problem,. so, you have extend the vendor to the respective purchase organization using T-code XK01 - create vendor as follows.
Type XK01
Vendor Code :________ (to be given)
Company Code : ______ (to be given)
Pur.organization : _____ (to be given)
Account Group : ______(to be given)
Reference :
Vendor code : ________ ( vendor code given)
Company code : _______ (company code given)
Pur.organization : _______(vendor created pur.org code given)
After fill the above data and press enter key and SAVE. The vendor extended to the respective (under reference data's) purchase organization.
Hope, it is useful for you.
Regards,
K.Rajendran -
Supplier not intended for purchasing organization message
Hello All,
We are implementing SAP SRM 7.03 with ECC 6.0.
During SC creation stage we are getting a error message, 'Supplier not intended for purchasing organization'
We are with one single purchasing organization, in the supplier search help the purchasing organization field is blank.
In table BBPM_BUT_FRG0061 the purchasing organization is available for all the replicated suppliers. In the org structure maintenance the Purchasing Organization and Purchasing Group functions are responsibility is defined properly.
The observation is in the basic data of the shopping cart, the purchasing organization and purchasing group fields are missing.
Kindly share pointers in resolving this issue.
Rgds,
MadhanDear Madhan,
I have faced similar problem recently, got the same error, however it was configured properly.
Resolved it with setting the message to warning:
Use T.code sm30 - table BBPV_PDMSG check oblect BBP_PD 018 it should be: EWI / E
Than add new entry to table BBPV_PDMSG_CUS for object BUS2000113 it should be
: Message class BBP_PD No 018 type W. Save your changes.
Or you can do the same with SPRO - SRM Server - Cross-application basic settings - Message Control - Influence message control for object BUS2000113.
Hope it helps!
Sincerely yours,
Sergey Eropkin -
Driver Not Intended For This Platform,,,,,,,,
well, i have windows vista home premium, and so does my dad and my ipod works on his comp so W.T.F!! is wrong with mine!? whenever i try to install the drivers for my ipod 80gb classic it tells me that the drivers were not intended for this platform.
so what do i do?
Message was edited by: tiederianAre you running 32-bit Vista or 64-bit Vista? What about your father? I understand there have been issues running iTunes / connecting an iPod on the 64-bit version. If you do a search for "vista 64 bit" (search is in the upper right), you'll see threads related to this. I run XP, so I haven't really been paying much attention to the Vista related threads. Sorry I can't be of more assistance.
-
Debliery Units : VENDOR IS NOT DEFINED FOR THIS SYSTEM
Dear Experts,
In prespective modeler , tried creating 'DELIVERY UNITS'. However get error message
"CANNOT CREATE DELIVERY UNIT AS CONTENT VENDOR IS NOT DEFINED FOR THIS SYSTEM" ?
How can we maintain CONTENT VENDOR ? we are using in-house HANA installation.
Regards
PrashantHi Shrikant,
Please do not reply with your same question in all of the threads which are answered.
What is the version you are using?
Where exactly you are unable to see?
Once you edited the field as mentioned by Jody, it will be in green circle. Also while creating the package, you can see this DU as shown below:
Regards
Raj -
BP not Valid for Sales Org - Web Client error
Hi,
We are currently upgrading from CRM 4.0 --> 2007. We have multiple Sales Organisations and different business roles. In the Web Clients we have a number of transactions. When we try and add additional users from other sales orgs to these activities/transactions we get the following error "BP not Valid for Sales Org".
In CRM 4.0 for the various Interaction Centers we never got this error. We were able to add additional users from other sales orgs to transactions.
Mt question is - How can we stop this error from occuring , so that we can add additional users from other sales orgs to these activities/transactions in the various Web Clients.
Any help on this would be greatly appreciated,
Thanks,
DanHi,
This error is appearing for the addition of employees. These employees are set up in the Org model for the relevant Sales Org's, yet the error still appears.
How would you go about adding employees,contacts etc from different Sales Org's to transactions (i.e attendees for an audit) in a Web Client that is set up to be Sales Org specific.
Regards,
Dan -
Web Client - BP not valid for Sales Org - CRM 2007
Hi,
In the Web Client (CRM 2007, for the Quick Create Activities it is not possible to add Business Partner's as Internal Assignees,Towards Awareness or Person's Responsible. There is an error message - "TEST1 is not Valid for Sales Org" -
This issue never occured previously with the "Web Interaction Centers" - CRM 4.0, when we added in Internal Assignee's , Towards Awareness BP's.
Any help on this would be greatly appreciated
Thanks
DanHi,
I suppose this is not the right forum for this issue...
Regards,
Wolfhard
Maybe you are looking for
-
can you help me?Please
-
I cannot install itunes in vista home premium 32 bit
i cnoot install itunes 10.4 in vista 32 bit. pl guide
-
Hi, I used a custom program.it displays the sales order details.we can change/view the details.If I have more Line items it populating more than one page.After scroll down if i select any cell and enter on it, it is comming to begining of the page. I
-
Changing the user name folder of administrator
I got married and changed my last name. I have a personal use macbook pro and I am the only account/administrator for my laptop. I have read many instructions involving creating a new administrator account and deletign the old one, but I wanted to
-
Trying to set up PowerMac G4 MDD 867DP with Leopard. Installed Leopard from disc and am trying to use Migration Assistant to migrate from an iBook G4 running Tiger. All seemed to go OK, but right now I am on the screen where it says "Select a Wireles