Vendor account details not coming in MKVZ

I Created one vendor account through transaction Fk01, but when i go to transaction MKVZ to see all details of vendor created by me , it shows the vendor name in F4 help, but does not show me any details.
Can anybody please tell me whats the problem.

Hi,
U will get list of vendor created centraly ie xk01 by linking MM ie field like tick gr based invoice verification etc. U will find it in MKVZ
Otherwise if u r creted with tcode fk01 it should be extended to MM then only u will able to see it in MKVZ.
Regards
Pari

Similar Messages

The vendor code is not coming against some Assignment line items with the

Hi All,
While executing t.code FBL3N,the vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
The GL A/c 4607000 is GR/IR clearing a/c.
Please let us know why this situation is happeing at the time of FBL3N.
Thanks
Ram

HI,
By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
Click on New Entries -
Table - BSEG - Field - LIFNR
Save. Now execute the report - FAGLL03 - Display/Change Items (New)
Give the gl account number and execute.
After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
After this come back and execute again. It will give you the vendor number.
Thanks & Regards,
Shashi Kanth.

The vendor account is not associated with the file you are trying to open.Please try again.

Please help me to understand what is the problem with the set up of the program. I bought an ebook from an internet site to which my IP address was blocked (in country 1). My brother bought it on a computer in country 2 and wanted to download and send me the file so I can open it on my computer. He set up initial download without Adobe ID. Afterwards he downloaded the pdf and send it to me. I tried to upload it with my ADE reader but it didn't work without ID. My brother then deleted afterwards his ADE and installed it again, downloaded the ebook again but this time setting up an ID. He transferred me the file ,I used the same ID but then the following message appeared "The vendor account is not associated with the file you are trying to open. Please try again." . Can this be fixed somehow? I cannot open the URLLinks even as there is no connection from my IP , but I have the pdf file ( ebook) but I don't know how to set up the program.

Sorry Everyone this error message appeared in Digital Editions 4 used on a windows 8 laptop. Thanks Chris

I can't open my digital book. Mis180 They said that the vendor account is not associated with the it

I can't open my digital book. Mis180 They said that the vendor account is not associated with the item I am trying to open.

This is the Reader forum. The Digital Editions one is here:
http://forums.adobe.com/community/adobe_digital_editions

Vendor Evaluation tab not coming in Service Entry sheet.

Please guide me to get the vendor eval tab in Service entry sheet creation and also provide the what are the transaction code to be used.
How to run the back ground job.
In Vendor evaluation each and every vendor need to be maintained the scores?
Regards,
Hanuman.

Hi,
T.code: ML81N below mentioned tabs are coming.
1. Basic Data
2. Accept data
3. Value
4. Long txt.
5. History.
Vendor Evaluation tab not coming
Regards,
Hanuman

BP Details not coming properly in BP search results for editing

Hi,
Can anyone help me to solve the below issue.
When i tried to search the BP for editing in IC WEB UI(7.0 ehp 1 version) by using the accounts & products, and a/c management work centers in IC AGENT business role i am not getting the complete BP details in the search option like all the assignment blocks are not coming.
But when i tried to search the BP for editing by using the SERVICEPRO & SALESPRO business role i am able to get the full details of the BP.
Can anyone help me why the BP details are not coming for search criteria in IC AGENT Business role.Is ther any customizing settings i missed out.
Thanks in advance
Regards
Nagaraju

Hi Nagaraju,
This would be because only restricted view is provided to IC Agent when compared other roles.
You can check the view configuration.
Regards
Leon

Cenvat clearing account is not coming in MIRO for Basic excise

Dear sir,
I have created the PO . After that i did GR for same at that I capture excise invocie& post it.
Accounting document is created for the same
here is accounting enrtry
        cenvat Basic = 100 debit
        cenvat edu cess = 2 debit
       Cenvat Higher Ecess =1 debit.
   Cenvat clearing account = 103 credit
when i go the miro
after simulating in miro i found
cenvat clearing account = 2 debit
but it should be 103 debit
why this is coming please help me...

Hi,
Generally it happens if CENVAT Clearing Account in not assigned in OB40 to the Tax Account Keys. But, as per you it has been maintained. So the following if you are using Tax Procedure TAXINN;
SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Condition-Based Excise Determination > Classify Condition Types

Vendor Name is not coming in Studio

Hi,
Vendor name as well as the name is not coming in the development studio. Rather it takes directly the sap.com as vendor name.
I have created product, software components(with necessary dependencies). but still i am not getting it right.
Can some one help me.
Thanks in advance,
Kumar

Hi Kumar,
1) Check if the Nameserver(SLD) is running as stated above,
2) Have you defined the "Namespace Prefix"
3) after doing all steps try after restarting the J2EE Engine.
also check your steps with the guide "How to Get Started with the SAP NetWeaver Development Infrastructure", given at the following link,
Web Application Server How-to Guides for SAP NetWeaver 2004 [original link is broken] [original link is broken]
Hope above will help you,
Regards
Deepak

Offset account name not coming in G/L printout

Hi,
We have SBO 2005B PL25
in the G/L printout the offset acount code is coming through systm variable 74 but the acount name is not coming even after using system variable 415 please help with a workaround as we urgntly need the printed cash books
regards
Edited by: Philip Eller on Jul 7, 2008 9:25 AM

Pradipta Dasgupta,
You can print offset account name using
system variable no.415 using subsidary account option and
then select template
'General Ledger by posting date(system)'.
I checked it offset account name appears in print preview.
Jeyakanthan

Badi for account details not triggering twice

Hi ,
I m creating a BADI for duplicate check in account details.My requirement is in the account details
it should check for the account details like first name , last name , email id if it exists it should throw an error message if not it should save ....
Im implementing a BADI for this req BUPA_ADDR_CHECK but the particular BADI is triggering only once ....So the logic for duplicate check is failing....
Any methods by which the BADI can be triggered every time
Any suggestions .......
Regards,
Sijo...

Hi Sijo,
The fields that are available for duplicate checks need to be decided by you. There is no fixed interface.
You need to mark in the duplicate check customizng, which fields you want, and they will automatically be taken up by this BADI ADDRESS_SEARCH. You can have a look at the function module ADDR_DUPLICATE_CHECK_FOR_BAPI that makes use of the duplicate check. The parameter T_SEARCH_FIELDS contains fields -
TABLENAME
FIELDNAME
CONTENT
These can hold any table, any field. Yuor implementation would need to use the content and then check it.
Hope this helps.
Cheers,
Rishu.

Vendor details not coming in MIRO

Dear SAP consultants,
I am facing the following problem.
While doing MIRO only the vendor number displys but the address and othe details doesn't appears
in the same. This is happening for all the vendors. I have checked the vendor details in xk02 and found
that all the details have been maintained. Also The p.o. is showing the detailes address of the vendor.
Insite of that it is not showing in the MIRO.
Please guide me wheather there is any customization for that because in the development server it
is showing the address and all the details of the ven

Dear Pravin & Mohammad,
Thanks for your reply. I have checked the sceen varients for miro in shdo transaction but how
exactly I will come to know which screen varient is done for the same because there are so many screen vareints already available.
Please guide.
Thanks & Regards.
Sandeep

Vendor Bank account details not appearing in DME file

Hi SAP gurus,
We have maintained bank information for vendor in the master record and also configured the field FPAYH-ZBNKN in the DME structure to retrieve bank information and pass to the DME file.However the values are not passing to the DME output file. Please let me know if any config is missing.
Answers will be rewarded with good points
Thanks
Ravi

Hi Ravi,
This is not reply to ur query but, we are implementing the same thing. I have designed the DMEE tree for the format required by the bank. I am able to run the F110 succesfully but after going to env->pay med->DME adm i get the FDTA screen with the message 'no records found'. Can u guide me in this case. I have done all the settings in the customization.
But when i run the program SAPFPAYM with the proper required values of payment run i get the overview screen in the overview screen when i dbl click the item under output list. I dont get download option in EDIT. In the spool Request when I go to forward and export the file, the file which I get is in different format.
pls. guide

Import PO - MIGO accounting entries not coming as required .

Dear Team ,
During Import PO , i have completed MIRO for planned delivery costs .. i have then gone to complete MIGO
while doing this MIGO , i find that Material - Dr and GR/IR clearing - Cr which is correct
but the problem is the planned delivery costs for which i earlier created MIRO is also added into the material value and each of them has to get displayed separately at the time of MIGO ( as each is assigned to separate accounts ) ... but right now all these planned delivery costs are getting added to the material value and is shown as 1 figure in GR/IR clearing account .
what settings are to made so that the planned delivery costs included in the GR/IR clearing to be shown separately ?
example :
__existing :__
after MIGO ,
Material - 50000 ngn ( Dr)
GR/IR clearing - 50000 ngn ( Cr)
*expected :*
after MIGO ,
Material - 50000 ngn ( Dr )
GR/IR clearing - 40,000 ngn
GIT Duty - 5,000 ngn
GIT Insurance - 5,000 ngn
Please suggest ..
Thanks ,
Mike

HI
check following points for your condition in M/06
Condition class =A
Calculate. Type=A
Condition Category=B ( Delivery cost)
Accurals
and check in M/08
Statistical
Assign Accurals and account key
IN po check you are assigen vendor to that condition ,click on details of condition in po and assign vendor
Regards
Kailas Ugale

TAN and CIT(TDS) details not coming in Form 16A (SAP 4.7 version)

Team,
I have maintained the deductor TAN details in J_1I_SECCO_CIT table. I have also maintained the CIT(TDS) under the Company Code> Additional Details > in TDS No. Field.
However, when I preview the TDS Certificate in J1INCERT, I am not able to view the details.
Please assist on this..........

Issue Resolved..........
The Business Place / Section Code details are to be entered mandatorily while posting..... Then only The TAN / CIT (TDS) Details will get printed on Form 16A...
Pre-Requisite: All related SAP Notes should be applied with manual corrections.

Limit cart unknown Account Assignment Not picking Approval email id

Hi All,
when i am trying to create a Shopping cart with unknown Account Assignment, at first instance approval email id is not picking. When i made some changes in the item data (say Descrtiption ) it is picking the approval email id. in SRM
We are SRM 5 to 7 upgrade, In SRM 5 there is a note to 974239 which will solve the issue. But the note is valid forSRM 7 EHP3 Version.
Can any one help me in giving the latest note.
Many thanks in advance.
Regards,
Charan M

Hi
Related links/ SAP OSS Notes to check out ->
Note 861889 - Limitations on limit and service PO's in case of ECS
Note 1046593 - Limit PO - Unable to delete and create new item
Note 966323 - Service Item: Not able to create PO in ERP backend
Note 969077 - LIMIT:SC with Account Assignment Unknown and IR_IND checked
Note 1000184 - Account assignment error when document transfer to back end
Note 1052892 - Account Assignment not visible for Limit Shopping Cart
Note 933618 - Multiple account assignments for limit item are lost
Re: Limit PO(Item category D instead of B)
SE 518 No account assignment exists for service li ne 0000000000
Creating SC with Dummy Account Assignment
Re: Account assignment on SRM
Re: Problem on account assignment
Re: Account details not coming while creating a Shopping Cart with Limit Item
LIMIT SC
Other related details ->
Use Screen variants (Transaction - SHD0) to change item overview and search result screens.
BADI - There is one BADI to hide/show some SC item creation links, there is one BADI to control screen details of PO, CTR... but not SC (and not external screens).
So, as usual, identify the template and change the HTML code in SE80.
To implement a more complex logic, like the default check box, change the ABAP code (usually in the PBO), if required.
Do let me know.
Regards
- Atul

Vendor account details not coming in MKVZ

Similar Messages

Maybe you are looking for