Vendor Cash Discount Master Data Settings

Where is the proper area of the COA that a vendor discount account should be setup and what are its typical settings?  Looking for specifics in the following areas:
Cost Element? Y/N
General Operating Expense Section of COA? Y/N
Auto-Posting? Y/N
Cash Relevant Flag? Y/N
Post w/o Tax? Y/N
Tax Category?
Any input would be greatly appreciated, thanks.

it will be set up in IMG tcode: OBXU (cash discount taken)
The set up for cash discount account in FS00:
Cost Element? Y/N >>> Yes, normally this is part of above GP in COPA (if you have COPA)
General Operating Expense Section of COA? Y/N > depends on your COA account grouping
Auto-Posting? Y/N > can be auto post or not, depending on the requirement if Finance won't allow any manual adjustment
Cash Relevant Flag? Y/N > No
Post w/o Tax? Y/N > Y in cases that the cash discount should not have tax
Tax Category? > just put "-" input tax

Similar Messages

  • What is procedure for creating new vendor and material master data in ABAP

    What is procedure for creating new vendor and material master data in ABAP .

    see below code which is used for creation of vendor master as well as extension...
    *& Report  ZFC_VENDOR_CREATE                                           *
    REPORT  ZFC_VENDOR_CREATE  LINE-SIZE 100
                               NO STANDARD PAGE HEADING
                               MESSAGE-ID ZZ.
                         TABLES
    TABLES : SSCRFIELDS.   " Fields on selection screens
                         CONSTANTS
    DATA : C_SPLIT TYPE C VALUE '#'.  " Used for Has Separator in GUI_UPLAOD
                         TYPES
    Int'table to hold Vendor Master Data
    TYPES : BEGIN OF TY_VENDOR_MASTER,
              FLAG  TYPE C,               " Update Flag
              LIFNR TYPE LIFNR,           " Vendor Number
              BUKRS TYPE BUKRS,           " Company Code
              KTOKK TYPE KTOKK,           " Account Group
              ANRED TYPE ANRED,           " Title
              NAME1 TYPE NAME1_GP,        " Name1
              NAME2 TYPE NAME2_GP,        " Name2
              SORTL TYPE SORTL,           " Search Term 1
              SORT2 TYPE AD_SORT2UL,      " Search Term 2
              STRAS TYPE STRAS_GP,        " Street
              PSTLZ TYPE PSTLZ,           " Postal Code
              ORT01 TYPE ORT01_GP,        " City
              REGIO TYPE REGIO,           " Region
              LAND1 TYPE LAND1_GP,        " Country
              SPRAS TYPE SPRAS,           " Language
              VBUND TYPE RASSC,           " Trading Partner
              BANKS TYPE BANKS,           " Country
              BANKL TYPE BANKK,           " Bank Key
              BANKN TYPE BANKN,           " Bank Account
              BKONT TYPE BKONT,           " Bank Control Key
              BANKA TYPE BANKA,           " Name of Bank
              AKONT TYPE AKONT,           " Reconciliation Account
              FDGRV TYPE FDGRV,           " Cash Management Group
              ZTERM TYPE DZTERM,          " Payment Terms
              REPRF TYPE REPRF,           " Check Double Invoice
              ZWELS TYPE DZWELS,          " Payment Methods
              XPORE TYPE XPORE,           " Pay all items separately
            END   OF TY_VENDOR_MASTER,
    Int'table to hold Vendor Extend Data
            BEGIN OF TY_VENDOR_EXTEND,
              FLAG  TYPE C,               " Update Flag
              LIFNR     TYPE LIFNR,           " Vendor Number
              BUKRS     TYPE BUKRS,           " Company Code
              KTOKK     TYPE KTOKK,           " Account Group
              REF_LIFNR TYPE LIFNR,           " Reference Vendor Number
              REF_BUKRS TYPE BUKRS,           " Reference Company Code
              AKONT     TYPE AKONT,           " Reconciliation Account
              FDGRV     TYPE FDGRV,           " Cash Management Group
              ZTERM     TYPE DZTERM,          " Payment Terms
              REPRF     TYPE REPRF,           " Check Double Invoice
              ZWELS     TYPE DZWELS,          " Payment Methods
              XPORE TYPE XPORE,           " Pay all items separately
            END   OF TY_VENDOR_EXTEND,
    Int'table to hold Error Records Data
            BEGIN OF TY_ERROR,
              MSG(200) TYPE C,                " To hold Message
              LIFNR    TYPE LIFNR,            " Vendor Number
              BUKRS    TYPE BUKRS,            " Company Code
            END   OF TY_ERROR.
                         DATA (Simple Fields)
    DATA : W_COUNT TYPE I,               " Variable to hold count of Records
           W_SUCC_REC TYPE I,            " No. of Success Records
           W_SUCC_REC1 TYPE I,           " No. of Updated Records
           W_ERR_REC TYPE I,             " No. of Error Records
           w_noupdate_rec type i.        " No. of Records not Changed
                         INTERNAL TABLES
    Int'table to hold uploaded data from File
    DATA : IT_VENDOR_MASTER    TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
           WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
           IT_VENDOR_EXTEND    TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
           WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
           WA_IT_BDCDATA       TYPE BDCDATA,
           IT_BDCDATA          TYPE STANDARD TABLE OF BDCDATA,
           WA_IT_MESSTAB       TYPE BDCMSGCOLL,
           IT_MESSTAB          TYPE STANDARD TABLE OF BDCMSGCOLL,
           IT_ERROR            TYPE STANDARD TABLE OF TY_ERROR,
           WA_IT_ERROR         TYPE TY_ERROR,
           it_error_fk01       type standard table of ty_error,
           wa_it_error_fk01    type ty_error,
           it_error_fk02       type standard table of ty_error,
           wa_it_error_fk02    type ty_error,
           it_succ_rec1        type standard table of ty_error,
           wa_it_succ_rec1     type ty_error,
           it_noupdate         type standard table of ty_error,
           wa_it_noupdate      type ty_error.
                         FLAGS
    DATA : FL_FLAG1 TYPE C,          " Flag to check error upload file
           FL_FLAG2 TYPE C,          " Flag to hold value
           FL_FLAG3 TYPE C,          " Flag to hold value
           FL_FLAG4 TYPE C.          " Flag to hold value
                         SELECTION-SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-001,
                POSITION POS_LOW.
    PARAMETERS :       P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-002,
                POSITION POS_LOW.
    PARAMETERS :       P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-003,
                POSITION POS_LOW.
    PARAMETERS :       P_VENEXT RADIOBUTTON GROUP R1.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN SKIP 2.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-004,
                POSITION POS_LOW.
    PARAMETERS :       P_MODE(1) DEFAULT 'N'.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-005,
                POSITION POS_LOW.
    PARAMETERS :       P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-016,
                POSITION POS_LOW.
    PARAMETERS :       P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN END OF BLOCK B1.
                         AT SELECTION-SCREEN ON
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
    Form to get file path for upload of data
      PERFORM GET_FILE_PATH.
    AT SELECTION-SCREEN ON BLOCK B1.
    Form to Validate data specified on Selection Screen
      CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
      PERFORM VALIDATE_DATA.
                         START - OF - SELECTION
    START-OF-SELECTION.
      IF P_VENMAS = 'X'.
    Form to upload data from Presentation Server for Vendor Master
        PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
        IF FL_FLAG1 NE 'X'.
          SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
          DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
                                  AND   BUKRS = ' '
                                  AND   KTOKK = ' '.
    Form to process data for Vendor Master
          PERFORM INSERT_VENDOR_MASTER_DATA.
        ENDIF.
      ELSEIF P_VENEXT = 'X'.
    Form to upload data from Presentation Server for Vendor Extend
        PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
        IF FL_FLAG1 NE 'X'.
          SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
          DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
                                  AND   BUKRS = ' '
                                  AND   KTOKK = ' '.
    Form to process data for Vendor Master
          PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
        ENDIF.
      ENDIF.
                         END - OF - SELECTION
    END-OF-SELECTION.
      IF FL_FLAG1 NE 'X'.
        FORMAT COLOR 7.
        WRITE:/2 TEXT-O01.           " Total Number of records read :
        FORMAT COLOR OFF.
        WRITE:40 W_COUNT.
        FORMAT COLOR 7.
        WRITE:/2 TEXT-O02.           " Total Number of Success records :
        FORMAT COLOR OFF.
        WRITE:40 W_SUCC_REC.
        FORMAT COLOR 7.
        WRITE:/2 TEXT-O07.           " Total Number of Updated records :
        FORMAT COLOR OFF.
        WRITE:40 W_SUCC_REC1.
        FORMAT COLOR 7.
        WRITE:/2 TEXT-O08.           " Total Number of Unchanged records :
        FORMAT COLOR OFF.
        WRITE:40 W_noupdate_REC.
        FORMAT COLOR 7.
        WRITE:/2 TEXT-O03.           " Total Number of Error records :
        FORMAT COLOR OFF.
        WRITE:40 W_ERR_REC.
        if not it_succ_rec1 is initial.
          skip 1.
          perform display_changed_report.
        endif.
        if not it_noupdate is initial.
          skip 1.
          perform display_nochange_report.
        endif.
        IF NOT IT_ERROR IS INITIAL.
          SKIP 3.
    Form to display error data
          PERFORM DISPLAY_ERROR_REPORT.
        ENDIF.
        IF FL_FLAG2 = 'X'.
          SKIP 2.
          FORMAT COLOR 4.
          WRITE:/2 TEXT-O04.        " BDC Session Name for Creation (FK01) :
          FORMAT COLOR OFF.
          WRITE:40 P_GROUP.
          perform display_error_report_fk01.
        ENDIF.
        IF FL_FLAG3 = 'X'.
          SKIP 2.
          FORMAT COLOR 4.
          WRITE:/2 TEXT-O09.        " BDC Session Name for Updation (FK02) :
          FORMAT COLOR OFF.
          WRITE:40 P_GROUP1.
          perform display_error_report_fk02.
        ENDIF.
      ENDIF.
    *&      Form  GET_FILE_PATH
    This form is used to get the specified path for uploading of data from
    flat file with the help of F4 function key
    FORM GET_FILE_PATH .
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          PROGRAM_NAME  = SYST-CPROG
          DYNPRO_NUMBER = SYST-DYNNR
          FIELD_NAME    = ' '
        IMPORTING
          FILE_NAME     = P_FILE.
    ENDFORM.                    " GET_FILE_PATH
    *&      Form  VALIDATE_DATA
    This form is used to validate the data given by user on the Selection
    Screen and the appropriate message is been displayed when an wrong
    entry is inputted
    FORM VALIDATE_DATA .
      IF SY-BATCH EQ 'X'.
        CLEAR SSCRFIELDS-UCOMM.
        MESSAGE E001(ZZ) WITH TEXT-011.
        " Excel file not to be used in Batch Mode
      ENDIF.
      IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
        MESSAGE E001(ZZ) WITH TEXT-012.
        " Session Mode should be either A or N or E
      ENDIF.
    ENDFORM.                    " VALIDATE_DATA
    *&      Form  UPLOAD_DATA
    This form is used to upload data from Presentation Server for either
    Vendor Master or Vendor Extend
    FORM UPLOAD_DATA TABLES P_IT_VENDOR.
      DATA : L_FILENAME TYPE STRING,
             L_FILETYPE TYPE CHAR10 VALUE 'ASC',
             L_HEADER_LENGTH TYPE I VALUE 0,
             L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
      MOVE P_FILE TO L_FILENAME.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = L_FILENAME
          FILETYPE                = L_FILETYPE
          HEADER_LENGTH           = L_HEADER_LENGTH
          READ_BY_LINE            = L_READ_BY_LINE
          HAS_FIELD_SEPARATOR     = C_SPLIT
        TABLES
          DATA_TAB                = P_IT_VENDOR
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
      IF SY-SUBRC <> 0.
       MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
    MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        FL_FLAG1 = 'X'.
      ELSEIF P_IT_VENDOR[] IS INITIAL.
        MESSAGE I001(ZZ) WITH TEXT-014.   " Uploaded File contains no data
        FL_FLAG1 = 'X'.
      ENDIF.
    ENDFORM.                    " UPLOAD_DATA
    *&      Form  INSERT_VENDOR_MASTER_DATA
    This form is used to process BDC data for Vendor Master
    FORM INSERT_VENDOR_MASTER_DATA .
      DATA : L_LIFNR TYPE LIFNR.
      CLEAR : L_LIFNR.
      sort it_vendor_master by flag.
      LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
        W_COUNT = W_COUNT + 1.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT  = WA_IT_VENDOR_MASTER-LIFNR
          IMPORTING
            OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
        if wa_it_vendor_master-flag = 'A'.
        SELECT SINGLE LIFNR
               FROM LFB1
               INTO L_LIFNR
               WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
               AND   BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
        IF SY-SUBRC EQ 0.
          WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
          WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
          WA_IT_ERROR-MSG   = TEXT-015.
          APPEND WA_IT_ERROR TO IT_ERROR.
          W_ERR_REC = W_ERR_REC + 1.
          CLEAR : WA_IT_ERROR, L_LIFNR.
        ELSE.
          REFRESH IT_BDCDATA.
          CLEAR IT_BDCDATA.
          PERFORM POPULATE_BDC_DATA_VEN_MASTER.
          PERFORM CALL_TRANSACTION.
        ENDIF.
        CLEAR : WA_IT_VENDOR_MASTER.
        elseif wa_it_vendor_master-flag = 'C'.
          IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
            PERFORM CLOSE_BDC_SESSION.
            fl_flag4 = 'X'.
          ENDIF.
          REFRESH IT_BDCDATA.
          CLEAR IT_BDCDATA.
          PERFORM POPULATE_BDC_DATA_VEN_MASTER.
          PERFORM CALL_TRANSACTION_FK02.
          CLEAR : WA_IT_VENDOR_MASTER.
        elseif wa_it_vendor_master-flag = 'N'.
          WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
          WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
          WA_IT_noupdate-MSG   = TEXT-018.
          APPEND WA_IT_noupdate TO IT_noupdate.
          W_noupdate_REC = W_noupdate_REC + 1.
          CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
        endif.
      ENDLOOP.
      IF FL_FLAG3 = 'X'.
        PERFORM CLOSE_BDC_SESSION.
      ENDIF.
    ENDFORM.                    " INSERT_VENDOR_MASTER_DATA
    *&      Form  POPULATE_BDC_DATA_VEN_MASTER
    This form is used to populate BDC data of Vendor Master
    FORM POPULATE_BDC_DATA_VEN_MASTER .
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT  = WA_IT_VENDOR_MASTER-ZTERM
        IMPORTING
          OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
      IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
        WA_IT_VENDOR_MASTER-REPRF = 'X'.
      ENDIF.
      IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
        WA_IT_VENDOR_MASTER-XPORE = 'X'.
      ENDIF.
      if wa_it_vendor_master-flag = 'A'.
      PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
               BDC_FIELD  USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
               BDC_FIELD  USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
               BDC_FIELD  USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
               BDC_FIELD  USING 'BDC_OKCODE'  '/00'.
      elseif wa_it_vendor_master-flag = 'C'.
      PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
               BDC_FIELD  USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
               BDC_FIELD  USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
               BDC_FIELD  USING 'BDC_OKCODE'  '=MALL',
               BDC_DYNPRO USING 'SAPMF02K' '0106',
               BDC_FIELD  USING 'RF02K-D0110' 'X',
               BDC_FIELD  USING 'RF02K-D0120' 'X',
               BDC_FIELD  USING 'RF02K-D0130' 'X',
               BDC_FIELD  USING 'RF02K-D0210' 'X',
               BDC_FIELD  USING 'RF02K-D0215' 'X',
               BDC_FIELD  USING 'RF02K-D0220' 'X',
               BDC_FIELD  USING 'BDC_OKCODE'  '/00'.
      endif.
      perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
               BDC_FIELD  USING 'LFA1-ANRED'  WA_IT_VENDOR_MASTER-ANRED,
               BDC_FIELD  USING 'LFA1-NAME1'  WA_IT_VENDOR_MASTER-NAME1,
               BDC_FIELD  USING 'LFA1-NAME2'  WA_IT_VENDOR_MASTER-NAME2,
               BDC_FIELD  USING 'LFA1-SORTL'  WA_IT_VENDOR_MASTER-SORTL,
               BDC_FIELD  USING 'LFA1-STRAS'  WA_IT_VENDOR_MASTER-STRAS,
               BDC_FIELD  USING 'LFA1-ORT01'  WA_IT_VENDOR_MASTER-ORT01,
               BDC_FIELD  USING 'LFA1-PSTLZ'  WA_IT_VENDOR_MASTER-PSTLZ,
               BDC_FIELD  USING 'LFA1-LAND1'  WA_IT_VENDOR_MASTER-LAND1,
               BDC_FIELD  USING 'LFA1-REGIO'  WA_IT_VENDOR_MASTER-REGIO,
               BDC_FIELD  USING 'LFA1-SPRAS'  WA_IT_VENDOR_MASTER-SPRAS,
               BDC_FIELD  USING 'BDC_OKCODE'  '/00',
               BDC_DYNPRO USING 'SAPMF02K' '0120',
               BDC_FIELD  USING 'LFA1-VBUND'  WA_IT_VENDOR_MASTER-VBUND,
               BDC_FIELD  USING 'BDC_OKCODE'  '/00',
               BDC_DYNPRO USING 'SAPMF02K' '0130',
               BDC_FIELD  USING 'LFBK-BANKS(01)'  WA_IT_VENDOR_MASTER-BANKS,
               BDC_FIELD  USING 'LFBK-BANKL(01)'  WA_IT_VENDOR_MASTER-BANKL,
               BDC_FIELD  USING 'LFBK-BANKN(01)'  WA_IT_VENDOR_MASTER-BANKN,
               BDC_FIELD  USING 'BDC_OKCODE'  '=BANK',
               BDC_DYNPRO USING 'SAPLBANK' '0100',
               BDC_FIELD  USING 'BNKA-BANKA'  WA_IT_VENDOR_MASTER-BANKA,
               BDC_FIELD  USING 'BDC_OKCODE'  '=ENTR',
               BDC_DYNPRO USING 'SAPMF02K' '0130',
               BDC_FIELD  USING 'BDC_OKCODE'  '=ENTR',
               BDC_DYNPRO USING 'SAPMF02K' '0210',
               BDC_FIELD  USING 'LFB1-AKONT'  WA_IT_VENDOR_MASTER-AKONT,
               BDC_FIELD  USING 'LFB1-FDGRV'  WA_IT_VENDOR_MASTER-FDGRV,
               BDC_FIELD  USING 'BDC_OKCODE'  '=/00',
               BDC_DYNPRO USING 'SAPMF02K' '0215',
               BDC_FIELD  USING 'LFB1-ZTERM'  WA_IT_VENDOR_MASTER-ZTERM,
               BDC_FIELD  USING 'LFB1-REPRF'  WA_IT_VENDOR_MASTER-REPRF,
               BDC_FIELD  USING 'LFB1-ZWELS'  WA_IT_VENDOR_MASTER-ZWELS,
               BDC_FIELD  USING 'LFB1-XPORE'  WA_IT_VENDOR_MASTER-XPORE,
               BDC_FIELD  USING 'BDC_OKCODE'  '=UPDA'.
    ENDFORM.                    " POPULATE_BDC_DATA_VEN_MASTER
    *&      Form  BDC_DYNPRO
    This form is used to move data to BDCDATA int'table
    FORM BDC_DYNPRO  USING PROGRAM TYPE BDC_PROG
                           DYNPRO  TYPE BDC_DYNR.
      CLEAR WA_IT_BDCDATA.
      WA_IT_BDCDATA-PROGRAM  = PROGRAM.
      WA_IT_BDCDATA-DYNPRO   = DYNPRO.
      WA_IT_BDCDATA-DYNBEGIN = 'X'.
      APPEND WA_IT_BDCDATA TO IT_BDCDATA.
    ENDFORM.                    " BDC_DYNPRO
    *&      Form  BDC_FIELD
    This form is used to move data to BDCDATA int'table
    FORM BDC_FIELD  USING FNAM TYPE ANY
                          FVAL TYPE ANY.
      CLEAR WA_IT_BDCDATA.
      WA_IT_BDCDATA-FNAM = FNAM.
      WA_IT_BDCDATA-FVAL = FVAL.
      APPEND WA_IT_BDCDATA TO IT_BDCDATA.
    ENDFORM.                    " BDC_FIELD
    *&      Form  CALL_TRANSACTION
    This form is used to Call FK01 for processing of data either for
    Vendor Master or Vendor Extend. The error records are inserted to
    Session which can be processed using SM35
    FORM CALL_TRANSACTION .
      DATA : L_OPTION TYPE CTU_PARAMS,
             L_SUBRC TYPE SYSUBRC.
      REFRESH IT_MESSTAB.
      CLEAR IT_MESSTAB.
      L_OPTION-DEFSIZE = 'X'.
      L_OPTION-DISMODE = P_MODE.
      L_OPTION-UPDMODE = 'S'.
      CALL TRANSACTION 'FK01'
           USING IT_BDCDATA
           MESSAGES INTO IT_MESSTAB
           OPTIONS FROM L_OPTION.
      L_SUBRC = SY-SUBRC.
      IF L_SUBRC = 0.
        W_SUCC_REC = W_SUCC_REC + 1.
      ELSE.
        IF FL_FLAG2 NE 'X'.
          PERFORM OPEN_BDC_SESSION.
          FL_FLAG2 = 'X'.
        ENDIF.
        PERFORM BDC_INSERT.
        W_ERR_REC = W_ERR_REC + 1.
        PERFORM ERROR_RECORD_DATA.
      ENDIF.
    ENDFORM.                    " CALL_TRANSACTION
    *&      Form  OPEN_BDC_SESSION
    Form used to open session for Error out Records
    FORM OPEN_BDC_SESSION .
      DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
             L_GROUP TYPE APQ_GRPN.       " Variable to hold value
      MOVE P_GROUP TO L_GROUP.
      MOVE SY-UNAME TO L_USERID.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT              = SY-MANDT
          GROUP               = L_GROUP
          KEEP                = SPACE
          USER                = L_USERID
        EXCEPTIONS
          CLIENT_INVALID      = 1
          DESTINATION_INVALID = 2
          GROUP_INVALID       = 3
          GROUP_IS_LOCKED     = 4
          HOLDDATE_INVALID    = 5
          INTERNAL_ERROR      = 6
          QUEUE_ERROR         = 7
          RUNNING             = 8
          SYSTEM_LOCK_ERROR   = 9
          USER_INVALID        = 10
          OTHERS              = 11.
      IF SY-SUBRC <> 0.
        WRITE:/ TEXT-008.              " Unable to open BDC Session
      ENDIF.
    ENDFORM.                    " OPEN_BDC_SESSION
    *&      Form  BDC_INSERT
    This form is used to insert error records to a Session method
    FORM BDC_INSERT .
      CALL FUNCTION 'BDC_INSERT'
        EXPORTING
          TCODE            = 'FK01'
        TABLES
          DYNPROTAB        = IT_BDCDATA
        EXCEPTIONS
          INTERNAL_ERROR   = 1
          NOT_OPEN         = 2
          QUEUE_ERROR      = 3
          TCODE_INVALID    = 4
          PRINTING_INVALID = 5
          POSTING_INVALID  = 6
          OTHERS           = 7.
      IF SY-SUBRC <> 0.
        WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
      ENDIF.
    ENDFORM.                    " BDC_INSERT
    *&      Form  ERROR_RECORD_DATA
    This form is used to process the messages for the error records which
    will be displayed on the output report
    FORM ERROR_RECORD_DATA .
      DATA : L_LINES TYPE I,
             L_MSG(200) TYPE C.
      DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
      READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
      IF SY-SUBRC = 0.
        CLEAR L_MSG.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            ID        = WA_IT_MESSTAB-MSGID
            LANG      = SY-LANGU
            NO        = WA_IT_MESSTAB-MSGNR
            V1        = WA_IT_MESSTAB-MSGV1
            V2        = WA_IT_MESSTAB-MSGV2
            V3        = WA_IT_MESSTAB-MSGV3
            V4        = WA_IT_MESSTAB-MSGV4
          IMPORTING
            MSG       = L_MSG
          EXCEPTIONS
            NOT_FOUND = 1
            OTHERS    = 2.
        IF SY-SUBRC = 0.
          WA_IT_ERROR_fk01-MSG = L_MSG.
        ENDIF.
        IF P_VENMAS = 'X'.
          WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
          WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
        ELSEIF P_VENEXT = 'X'.
          WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
          WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        ENDIF.
        APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
        CLEAR WA_IT_ERROR_fk01.
      ENDIF.
    ENDFORM.                    " ERROR_RECORD_DATA
    *&      Form  CLOSE_BDC_SESSION
    Form used to close session of the Error Records
    FORM CLOSE_BDC_SESSION .
      CALL FUNCTION 'BDC_CLOSE_GROUP'
        EXCEPTIONS
          NOT_OPEN    = 1
          QUEUE_ERROR = 2
          OTHERS      = 3.
      IF SY-SUBRC <> 0.
        WRITE:/ TEXT-010.             " Unable to Close BDC Session
      ENDIF.
    ENDFORM.                    " CLOSE_BDC_SESSION
    *&      Form  CHK_AND_INS_VENDOR_EXTEND_DATA
    This form is used to process BDC data for Vendor Extend
    FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
      DATA : L_LIFNR TYPE LIFNR.
      CLEAR : L_LIFNR, fl_flag4.
      sort it_vendor_extend by flag.
      LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
        W_COUNT = W_COUNT + 1.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT  = WA_IT_VENDOR_EXTEND-REF_LIFNR
          IMPORTING
            OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
        if wa_it_vendor_extend-flag = 'A'.
        SELECT SINGLE LIFNR
               FROM LFB1
               INTO L_LIFNR
               WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
               AND   BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
        IF SY-SUBRC NE 0.
          WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
          WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
          WA_IT_ERROR-MSG   = TEXT-007.
          APPEND WA_IT_ERROR TO IT_ERROR.
          W_ERR_REC = W_ERR_REC + 1.
          CLEAR : WA_IT_ERROR, L_LIFNR.
        ELSE.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              INPUT  = WA_IT_VENDOR_EXTEND-LIFNR
            IMPORTING
              OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
          SELECT SINGLE LIFNR
                 FROM LFB1
                 INTO L_LIFNR
                 WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
                 AND   BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
          IF SY-SUBRC EQ 0.
            WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
            WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
            WA_IT_ERROR-MSG   = TEXT-015.
            APPEND WA_IT_ERROR TO IT_ERROR.
            W_ERR_REC = W_ERR_REC + 1.
            CLEAR : WA_IT_ERROR, L_LIFNR.
          ELSE.
            REFRESH IT_BDCDATA.
            CLEAR IT_BDCDATA.
            PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
            PERFORM CALL_TRANSACTION.
          ENDIF.
        ENDIF.
        CLEAR : WA_IT_VENDOR_EXTEND.
        elseif wa_it_vendor_extend-flag = 'C'.
          IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
            PERFORM CLOSE_BDC_SESSION.
            fl_flag4 = 'X'.
          ENDIF.
          REFRESH IT_BDCDATA.
          CLEAR IT_BDCDATA.
          PERFORM POPULATE_BDC_DATA_VEN_extend.
          PERFORM CALL_TRANSACTION_FK02.
           CLEAR : WA_IT_VENDOR_EXTEND.
        elseif wa_it_vendor_extend-flag = 'N'.
          WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
          WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
          WA_IT_noupdate-MSG   = TEXT-019.
          APPEND WA_IT_noupdate TO IT_noupdate.
          W_noupdate_REC = W_noupdate_REC + 1.
          CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
        endif.
      ENDLOOP.
      IF FL_FLAG2 = 'X'.
        PERFORM CLOSE_BDC_SESSION.
      ENDIF.
      if fl_flag3 = 'X'.
        PERFORM CLOSE_BDC_SESSION.
      ENDIF.
    ENDFORM.                    " CHK_AND_INS_VENDOR_EXTEND_DATA
    *&      Form  POPULATE_BDC_DATA_VEN_EXTEND
    This form is used to populate BDC data of Vendor Extend
    FORM POPULATE_BDC_DATA_VEN_EXTEND .
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT  = WA_IT_VENDOR_EXTEND-ZTERM
        IMPORTING
          OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
      IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
        WA_IT_VENDOR_EXTEND-REPRF = 'X'.
      ENDIF.
      IF WA_IT_VENDOR_extend-XPORE = 'Y'.
        WA_IT_VENDOR_extend-XPORE = 'X'.
      ENDIF.
      if wa_it_vendor_extend-flag = 'A'.
      PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
               BDC_FIELD  USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
               BDC_FIELD  USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
               BDC_FIELD  USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
               BDC_FIELD  USING 'RF02K-REF_LIFNR'
                                          WA_IT_VENDOR_EXTEND-REF_LIFNR,
               BDC_FIELD  USING 'RF02K-REF_BUKRS'
                                          WA_IT_VENDOR_EXTEND-REF_BUKRS,
               BDC_FIELD  USING 'BDC_OKCODE'  '/00'.
      elseif wa_it_vendor_extend-flag = 'C'.
      PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
               BDC_FIELD  USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
               BDC_FIELD  USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
               BDC_FIELD  USING 'RF02K-D0210' 'X',
               BDC_FIELD  USING 'RF02K-D0215' 'X',
               BDC_FIELD  USING 'BDC_OKCODE'  '/00'.
      endif.
      perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
               BDC_FIELD  USING 'LFB1-AKONT'  WA_IT_VENDOR_EXTEND-AKONT,
               BDC_FIELD  USING 'LFB1-FDGRV'  WA_IT_VENDOR_EXTEND-FDGRV,
               BDC_FIELD  USING 'BDC_OKCODE'  '=/00',
               BDC_DYNPRO USING 'SAPMF02K' '0215',
               BDC_FIELD  USING 'LFB1-ZTERM'  WA_IT_VENDOR_EXTEND-ZTERM,
               BDC_FIELD  USING 'LFB1-REPRF'  WA_IT_VENDOR_EXTEND-REPRF,
               BDC_FIELD  USING 'LFB1-ZWELS'  WA_IT_VENDOR_EXTEND-ZWELS,
               BDC_FIELD  USING 'LFB1-XPORE'  WA_IT_VENDOR_extend-XPORE,
               BDC_FIELD  USING 'BDC_OKCODE'  '=UPDA'.
    ENDFORM.                    " POPULATE_BDC_DATA_VEN_EXTEND
    *&      Form  DISPLAY_ERROR_REPORT
    This form is used to display the error records on the output screen
    FORM DISPLAY_ERROR_REPORT .
      IF P_VENMAS = 'X'.
        WRITE:/ TEXT-O05.            " Error List for Vendor Master
      ELSEIF P_VENEXT = 'X'.
        WRITE:/ TEXT-O06.            " Error List for Vendor Master Extended
      ENDIF.
      WRITE:/ SY-ULINE(100).
      FORMAT COLOR 1.
      WRITE:/1   SY-VLINE,
             2   TEXT-H01,              " Vendor Number
             17  SY-VLINE,
             18  TEXT-H02,              " Company Code
             31  SY-VLINE,
             32  TEXT-H03,              " Error Message
             100 SY-VLINE.
      FORMAT COLOR OFF.
      WRITE:/ SY-ULINE(100).
      LOOP AT IT_ERROR INTO WA_IT_ERROR.
        FORMAT COLOR 2.
        WRITE:/1   SY-VLINE,
               2   WA_IT_ERROR-LIFNR,
               17  SY-VLINE,
               18  WA_IT_ERROR-BUKRS,
               31  SY-VLINE,
               32  WA_IT_ERROR-MSG,
               100 SY-VLINE.
        CLEAR : WA_IT_ERROR.
        FORMAT COLOR OFF.
      ENDLOOP.
      WRITE:/ SY-ULINE(100).
    ENDFORM.                    " DISPLAY_ERROR_REPORT
    *&      Form  CALL_TRANSACTION_FK02
    Form used to Call Transaction FK02
    form CALL_TRANSACTION_FK02 .
      DATA : L_OPTION TYPE CTU_PARAMS,
             L_SUBRC TYPE SYSUBRC.
      REFRESH IT_MESSTAB.
      CLEAR IT_MESSTAB.
      L_OPTION-DEFSIZE = 'X'.
      L_OPTION-DISMODE = P_MODE.
      L_OPTION-UPDMODE = 'S'.
      CALL TRANSACTION 'FK02'
           USING IT_BDCDATA
           MESSAGES INTO IT_MESSTAB
           OPTIONS FROM L_OPTION.
      L_SUBRC = SY-SUBRC.
      IF L_SUBRC = 0.
        W_SUCC_REC1 = W_SUCC_REC1 + 1.
        WA_IT_succ_rec1-MSG = Text-017.
        IF P_VENMAS = 'X'.
          WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
          WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
        ELSEIF P_VENEXT = 'X'.
          WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
          WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        ENDIF.
        APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
      ELSE.
        IF FL_FLAG3 NE 'X'.
          PERFORM OPEN_BDC_SESSION_fk02.
          FL_FLAG3 = 'X'.
        ENDIF.
        PERFORM BDC_INSERT_fk02.
        W_ERR_REC = W_ERR_REC + 1.
        PERFORM ERROR_RECORD_DATA1.
      ENDIF.
    endform.                    " CALL_TRANSACTION_FK02
    *&      Form  OPEN_BDC_SESSION_fk02
    Form used to Open session for FK02
    form OPEN_BDC_SESSION_fk02 .
      DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
             L_GROUP TYPE APQ_GRPN.       " Variable to hold value
      MOVE P_GROUP1 TO L_GROUP.
      MOVE SY-UNAME TO L_USERID.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT              = SY-MANDT
          GROUP               = L_GROUP
          KEEP                = SPACE
          USER                = L_USERID
        EXCEPTIONS
          CLIENT_INVALID      = 1
          DESTINATION_INVALID = 2
          GROUP_INVALID       = 3
          GROUP_IS_LOCKED     = 4
          HOLDDATE_INVALID    = 5
          INTERNAL_ERROR      = 6
          QUEUE_ERROR         = 7
          RUNNING             = 8
          SYSTEM_LOCK_ERROR   = 9
          USER_INVALID        = 10
          OTHERS              = 11.
      IF SY-SUBRC <> 0.
        WRITE:/ TEXT-008.              " Unable to open BDC Session
      ENDIF.
    endform.                    " OPEN_BDC_SESSION_fk02
    *&      Form  BDC_INSERT_fk02
    Form used to insert data into BDC session using FK02
    form BDC_INSERT_fk02 .
      CALL FUNCTION 'BDC_INSERT'
        EXPORTING
          TCODE            = 'FK02'
        TABLES
          DYNPROTAB        = IT_BDCDATA
        EXCEPTIONS
          INTERNAL_ERROR   = 1
          NOT_OPEN         = 2
          QUEUE_ERROR      = 3
          TCODE_INVALID    = 4
          PRINTING_INVALID = 5
          POSTING_INVALID  = 6
          OTHERS           = 7.
      IF SY-SUBRC <> 0.
        WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
      ENDIF.
    endform.                    " BDC_INSERT_fk02
    *&      Form  display_changed_report
    Form to display Updated Vendor data
    form display_changed_report .
      IF P_VENMAS = 'X'.
        WRITE:/ TEXT-O10.          " Updated List for Vendor Master
      ELSEIF P_VENEXT = 'X'.
        WRITE:/ TEXT-O11.          " Updated List for Vendor Master Extended
      ENDIF.
      WRITE:/ SY-ULINE(100).
      FORMAT COLOR 1.
      WRITE:/1   SY-VLINE,
             2   TEXT-H01,              " Vendor Number
             17  SY-VLINE,
             18  TEXT-H02,              " Company Code
             31  SY-VLINE,
             32  TEXT-H04,              " Message
             100 SY-VLINE.
      FORMAT COLOR OFF.
      WRITE:/ SY-ULINE(100).
      LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
        FORMAT COLOR 2.
        WRITE:/1   SY-VLINE,
               2   WA_IT_succ_rec1-LIFNR,
               17  SY-VLINE,
               18  WA_IT_succ_rec1-BUKRS,
               31  SY-VLINE,
               32  WA_IT_succ_rec1-MSG,
               100 SY-VLINE.
        CLEAR : WA_IT_succ_rec1.
        FORMAT COLOR OFF.
      ENDLOOP.
      WRITE:/ SY-ULINE(100).
    endform.                    " display_changed_report
    *&      Form  display_nochange_report
    Form to display No Changed data for Vendors
    form display_nochange_report .
      IF P_VENMAS = 'X'.
        WRITE:/ TEXT-O12.       " No Changes List for Vendor Master
      ELSEIF P_VENEXT = 'X'.
        WRITE:/ TEXT-O13.       " No Changes List for Vendor Master Extended
      ENDIF.
      WRITE:/ SY-ULINE(100).
      FORMAT COLOR 1.
      WRITE:/1   SY-VLINE,
             2   TEXT-H01,              " Vendor Number
             17  SY-VLINE,
             18  TEXT-H02,              " Company Code
             31  SY-VLINE,
             32  TEXT-H04,              " Message
             100 SY-VLINE.
      FORMAT COLOR OFF.
      WRITE:/ SY-ULINE(100).
      LOOP AT IT_noupdate INTO WA_IT_noupdate.
        FORMAT COLOR 2.
        WRITE:/1   SY-VLINE,
               2   WA_IT_noupdate-LIFNR,
               17  SY-VLINE,
               18  WA_IT_noupdate-BUKRS,
               31  SY-VLINE,
               32  WA_IT_noupdate-MSG,
               100 SY-VLINE.
        CLEAR : WA_IT_noupdate.
        FORMAT COLOR OFF.
      ENDLOOP.
      WRITE:/ SY-ULINE(100).
    endform.                    " display_nochange_report
    *&      Form  ERROR_RECORD_DATA1
    Form to get Error Message for Changed Vendors
    form ERROR_RECORD_DATA1 .
      DATA : L_LINES TYPE I,
             L_MSG(200) TYPE C.
      DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
      READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
      IF SY-SUBRC = 0.
        CLEAR L_MSG.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            ID        = WA_IT_MESSTAB-MSGID
            LANG      = SY-LANGU
            NO        = WA_IT_MESSTAB-MSGNR
            V1        = WA_IT_MESSTAB-MSGV1
            V2        = WA_IT_MESSTAB-MSGV2
            V3        = WA_IT_MESSTAB-MSGV3
            V4        = WA_IT_MESSTAB-MSGV4
          IMPORTING
            MSG       = L_MSG
          EXCEPTIONS
            NOT_FOUND = 1
            OTHERS    = 2.
        IF SY-SUBRC = 0.
          WA_IT_ERROR_fk02-MSG = L_MSG.
        ENDIF.
        IF P_VENMAS = 'X'.
          WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
          WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
        ELSEIF P_VENEXT = 'X'.
          WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
          WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        ENDIF.
        APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
        CLEAR WA_IT_ERROR_fk02.
      ENDIF.
    endform.                    " ERROR_RECORD_DATA1
    *&      Form  display_error_report_fk01
    Form to display Error Report for Master Vendors (FK01)
    form display_error_report_fk01 .
      IF P_VENMAS = 'X'.
        WRITE:/ TEXT-O05.     " Error List for Vendor Master (FK01)
      ELSEIF P_VENEXT = 'X'.
        WRITE:/ TEXT-O06.     " Error List for Vendor Master Extended (FK01)
      ENDIF.
      WRITE:/ SY-ULINE(100).
      FORMAT COLOR 1.
      WRITE:/1   SY-VLINE,
             2   TEXT-H01,              " Vendor Number
             17  SY-VLINE,
             18  TEXT-H02,              " Company Code
             31  SY-VLINE,
             32  TEXT-H04,              " Message
             100 SY-VLINE.
      FORMAT COLOR OFF.
      WRITE:/ SY-ULINE(100).
      LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
        FORMAT COLOR 2.
        WRITE:/1   SY-VLINE,
               2   WA_IT_ERROR_fk01-LIFNR,
               17  SY-VLINE,
               18  WA_IT_ERROR_fk01-BUKRS,
               31  SY-VLINE,
               32  WA_IT_ERROR_fk01-MSG,
               100 SY-VLINE.
        CLEAR : WA_IT_ERROR_fk01.
        FORMAT COLOR OFF.
      ENDLOOP.
      WRITE:/ SY-ULINE(100).
    endform.                    " display_error_report_fk01
    *&      Form  display_error_report_fk02
    Form to display Error Report for changed Vendors (FK02)
    form display_error_report_fk02 .
      IF P_VENMAS = 'X'.
        WRITE:/ TEXT-O14.     " Error List for Vendor Master (FK02)
      ELSEIF P_VENEXT = 'X'.
        WRITE:/ TEXT-O15.     " Error List for Vendor Master Extended (FK02)
      ENDIF.
      WRITE:/ SY-ULINE(100).
      FORMAT COLOR 1.
      WRITE:/1   SY-VLINE,
             2   TEXT-H01,              " Vendor Number

  • To find cash discount due date for invoice

    Hi,
    is there any fuction module to get cash discount due date using Payment term Zterm, Ztag:1Days from Baseline Date for Payment and Ztag2:Days from Baseline Date for Payment from T052 table.
    Regards,
    santosh

    check the below fuction module.
    CALL FUNCTION 'DETERMINE_DUE_DATE'
      EXPORTING
        I_FAEDE                          = faede
    IMPORTING
       E_FAEDE                          =  faede
    EXCEPTIONS
       ACCOUNT_TYPE_NOT_SUPPORTED       = 1
       OTHERS                           = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    you can pass the zterm and Days from Baseline Date for Payment from T052 table to correspoinding fields of faede structure .
    Thanks and Regards,
    pavankumar

  • Withholding Tax Report  S_P00_07000134 not excluding vendor cash discount

    Hi Gurus
    I am running withholding tax report S_P00_07000134. The report output has gross endor payment. It is not excluding the cash discount amount in the output.
    Can someone please help me as to how can we change the report S_P00_07000134 so that it displays amounts after excluding vendor cash discount?
    I appreciate your help.
    Thanks,
    Shalu

    HI
    please refer the below notes
    1304883 1273403
    Reg
    Madhu M

  • Vendor cash discount

    Hi experts
    please give me solution for how to calculate the cash discount on vendor line items
    as per the payment term within 30 days  15% cash discount , if we pay the amount before due date(any day from 1 to 30 days) we will receive the cash discount as per standar system , cash discout =amount percentage/100 (ie 10000015%)
    But My requirement is like this
    paymant term is within 30days 15% cash diacount
    baseline date is 1.12.2011
    my payment date is 11.12.2011
    i want to calculate cash discount like this Casch sdiscount =10000015/10020/365( 20 days before net due date)
    is it possible to calculate the cash discount like this.
    please advice me any otherway to do this requirement

    N Konnipati
    your rite  we dont have such type of  Cash discount in standrad SAP (Day wise ) but can we go for the vendor line item interest calculation with the help of payment term but system calculating the interest after net payment due date but it is not calculate how many days before we paid (day wise)
    i have followed this steps OBB8,OB46,OB82,OBAC,define time bsaed terms,OB83, Maintain interest rates for vendor operations(brazil),OBV9 and assigne forms for  interest indicator.( in master data fs00 and fk02 interest indicator has been assigned)
    can u advice any other steps i want to do for item level interest calculation
    regards
    marikeri

  • Vendor cash discount in F110

    Dear gurus, please advise in this issue
    I have a vendor with 2%10 specified in the vendor master and also on the invoice- pmt method  is check.
    I checked to see if 2%10 is defined as 2% discount if paid within 10 days else due net by 30 days.And this seems to be OK.
    When I ran F110, the payment program(for check) is not picking up this invoice untill  30 days from baseline date.
    and on 30th day the f110 program picked up this invoice, I wonder why the cash discount is not being taken/ considered by the payment program.
    Max cash discount is NOT checked in configuration.But I think this need NOT to be checked, if not please suggest.
    Please advise what changes needs to be done to get F110 pick up such invoices to take cash discount.
    I understand that if "Max cash disc" is checked SAP takes cash discount even after discount period.
    Thank you
    MSJ

    Hi
    cash dicount related setting in FBZP but when autometically pick.and other once vendor master data check the setting.
    Regards
    suresh

  • Vendor withholding tax master data in Transactional data

    Hi
    In which sap transactional table vendor witholding master data ( fk01- withholding tax data).  while recording outgoing payment transaction FK53  or  vendor invoice FB60.
    Vendor master > withholding tax accounting   table is   LFBW.
    i need where it is saved while posting Outgoing payment trasanction in transactionl data.
    thanks.
    thomas

    hi
    i need field
    withholding tax exemption no, exemption from date, todate, Exemption reason, 
    as a master data it is saved in vendor master data > withholding tax accounting
    but i need where it is saved in transaction data.
    thanks

  • Master data settings in Costing tab

    HI
    i have made settings in costing 1for SFG, FG , RM and packing packing material like this
    i have selected with quanity structure and material origin tabs and profit center common and for sfg and fg variance key assign.
    i have got a dout like as we are not doing costing for Raw material and packing material so if we dont select with quantity structure and do not cost tab in costing 1 what would be the effect in future.
    i have tested in both scenario it is working fine, but which one is correct in order to avoid further correction in future as we are planning to upload master data.
    thanks in advance
    kareem

    Hi Ajay thanks for reply,
    But i have a dout
    when i tick  quantity structure tab when i do standard cost estimate for FG through CK40N all the raw materials are also get costed and the raw material are released with standrd price just like FG And SFG during costing run we can see the results of the costing run in costing 2 tab.
    when we run standard cost it will take latest PO Price but when we issue the material to the process order does it consider any changes after costing run.
    thanks
    kareem

  • BC Datasource for Vendor:Payment Transaction Master Data

    Hi experts,
    Is there a standard Business Content Datasource to extract the master data for fields that are visible in the Vendor: Payment Transactions screen?
    I basically need data from tables LFBK, BNKA and I wanted to see if there was a way to do it without creating a custom datasource.
    Also, how to you obtain the IBAN#.  Clicking on it does not yield a technical name for what table and field it comes from.
    Thanks.

    there is no such BC for vendor available but still you can check out 2LIS_02_S013, 0MM_PUR_VE_01
    and 0MM_PUR_VE_02. They may help.
    for me its good to go for a custom extractor with View based on those table. that will be quick and best.

  • Insert vendor email into master data

    Hello all,
    I would like to insert e-mail data into FK02 by using LSMW (recording) to the field
    SMTP_ADDR.
    the sys insert it to a non comfortable place ("other communication")
    any suggest ?
    thanks in advance,
    Ronen

    I am sure an abpaer can create a BDC upload for this.

  • Vendor Master Data, (FK02), Bank Details Fields Need to be Shown

    Dear Gurus,
    Now, in the payment transaction tab in FK02 (Modify Vendors), some bank fields need to be shown, which possibly would be suppressed.
    How to activate or surface these fields?
    Some fields would be like IBAN number, Bank Code, Bank Country, etc.
    Points Awardable.

    Goto IMG>> Fin A/c >> AR & AP >>> Vendor A/c >>> Master Data >>> Prepration of Creating vendor master data >> Define screen layout per activity (vendor)
    click : Change Vendor (Accounting)
    Goto General data : >> Payment transactions
    Make Bank details as optional filed from supressed.
    Hope this helps
    Please assign points as way to say thanks

  • How to Assign a Constant Value to a Dim. Member when pulling Master Data?

    BPC Gurus:
    I am trying load Vendor and Customer Master data into BPC dimension.  My Dimesnion has memebrs: ID, EVDESCRIPTION, PARENTH1, TYPE.  I have successfully pulled the ID and the description from 0CUSTOMER and 0VENDOR.  However, I
    need to have a ttext value for 'PARENTH1' and 'TYPE'.  For Customers, I want to add a FIXED value "'CUSTOMER' for every
    Customer ID pulled in and also for "TYPE", I want a value of "CUSTOMER".  When I maintainthe Dimension, I want to see
    th followingvalues:
    ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
    0000000001         WALMART                                            CUSTOMER                        CUSTOMER
    0000000002          TARGET                                               CUSTOMER                        CUSTOMER
    and so ON
    Since we have Vendor Numbers in the same Diemsnion, when I pull Vendors, I need to have similar values as:
    ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
    0000005050         ABC Supply Inc.                                   VENDOR                            VENDOR
    0000005051         BASF                                                    VENDOR                            VEDOR
    and so ON
    How can assign a Fixed value to the member Propert?  Can I achieve it in Conversion file....? 
    ( My atempts failed...).
    Any suggestion recommendation would be gretaly appreciated.
    Munna.

    Hi,
    For adding fixed values to the properties, you can use the transformation file. In the mapping section, you can specify a constant value. This value will be written to properties of all the members while importing master data. However, for parenth, its a bit different. First thing is that, you need to have a member called CUSTOMER, then only you can have CUSTOMER in the parenth column. Even if you add it and use the mapping section for this purpose, then it will write CUSTOMER to parenth for all the members (even to CUSTOMER member). And this will be wrong. So, you will need to write it manually.
    Hope you got the idea.

  • Issue with Master data change workflow in GRC PC 10.1

    Hi,
    I have configured the work flow for master data changes in GRC PC 10.1, however approver is not able to view the request in inbox where are the organization owner is able to see the review for change request in inbox.
    Please let me know if there is any config where we need to set the approvers for workflow, so that the system creates a request for approver.
    Regards,
    Giridhar

    Dear Giridhar,
    Please, check the following configuration:
    1. Activate the workflow (Path: SPRO -> GRC -> Shared Master Data Settings -> Activate Master Data Changes)
    2. See whether Checkbox "Approval" is ticked for the selected entity
    3. If you activate master data changes, please check whether the correct roles are indicated in the Maintain Custom Agent Determination Rules in the Workflow settings.
    Business Event: 0FN_MDCHG_APPR
    Role: Select the role you gave to the approver
    After performing this configuration, a task must appear in the work inbox.
    Best Regards,
    Fernando

  • Master Data Distribution !

    Hi!
       I want to know the purpose of master data distribution for the following between the vendor & the customer.
       1. Material Master
       2. Vendor Master & Customer Master.
      Whats the purpose of linking our system with our vendor or customer etc with <b>regard to master data</b>
      Pls explain in detail.
      Thanks
      Rahul.

    Hi Rahul,
    We dont do master data distribution with customer system or vendor system.
    Master data distribution is done between distributed systems of the same organization using ALE configuration. So we dont link to customer or vendor systems for transfering master data but for transfering transactional data like purchase orders or sales orders etc.
    Master Data Distribution
    Rather than distributing the complete master data information, views of the master data can be distributed (for example, material sales data, material purchase data). Each view of the master data is stored in a separate message type.
    Users can specify which data elements in a master record are to be distributed.
    Various distribution strategies are supported:
    ·        Cross-system master data can be maintained centrally and then distributed. The final values are assigned locally.
    ·        A view of the master data can be maintained locally. In this case there is always one maintenance system for each view. After the master data has been maintained it is transferred to a central SAP system and distributed from there.
    Types of Distribution
    ·        Active distribution (PUSH)
    If the master data is changed (for example, new data, changes or deletions), a master data IDoc is created in the original system and is distributed by class as specified in the distribution model.
    ·        Requests (PULL)
    A request occurs when a client system needs information about master data held in the system. You can select specific information about the master data, for example, the plant data for a material.
    If you want to be notified of all subsequent changes to the master data, this has to be set up “manually” between the two systems. It is not yet possible for this to be done automatically in the distribution mechanism in the original system.
    Transferring the Master Data
    A distinction is made between transferring the entire master data and transferring only changes to the master data.
    If the entire master data is transferred, a master IDoc is created for the object to be distributed in response to a direct request from a system. Only the data that was actually requested is read and then sent. The customer specifies the size of the object to be distributed in a request report.
    If only changes are transferred, the master IDoc is created based on the logged changes.
    Reward points for the useful answers,
    Aleem.

  • Header Level Cash Discount For VBRK-VBELN, Where Can I get?

    Hi Experts,
    I know the # of VBELN of VF03 (VBRK), now, I need to pull the data of,
    <b>1- Header Level Cash Discount - Condition Value and
    2 - Header Level Cash Discount - Amount i.e.
    % Value.</b>
    Normally, I know the procedure is,
    (The relationship is )
    KONV-KNUMV = VBRK-KNUMV
    For all the columns the field KONV-KWERT can be used
    But, its ITEM level, where as I am looking for Header Level?
    So, Where Can I get the VBRK-KNUMV Header level,
    1-  Cash Discount Condition Value data? and
    2-  Cash Discount Amount data i.e. %
    Thank you,
    Message was edited by:
            Srikhar

    ThanQ Sheshu,
    No, there is no entry in KONV-KNUMH for KSHCL type of Discounts i.e. SKTV. THere r entries i.e. record #s for Pricing matters! I dont know Y?
    So, It seems to b, I hv to use the follwoing code,
    at new knumv
    SUM (of types KONV-KSHCL = SKTV)
    endat.
    Or Do u hv any other clue? like, other tables searching?
    anyways, thanq

Maybe you are looking for