Vendor Debit Memo

Hi Guys
I have a scenario - where after MIRO and invoicing has happened, we do a return delivery to the vendor through MIGO {A02 return delivery, R02 material document}....
My question is, this does not impact the open AP postings right? and to make the open item reduced for the vendor, would I have to do an FB65 to make sure the open AP amount is reduced?
Or would doing MR11, facillate the correction of the FI postings?
Thank you
Rukshana

Dear
In MIRO screen credit memo option is there for reversal of invoice at header pls check
regards

Similar Messages

Miro debit memo - return to vendor

HI,
is it posible to define output for debit memo like output for rduction invoice (vendor error)?
the issue is that we want to use in standart Return to Vendor process and with invoice verification process to take out output with debit memo to the vendor.
thaks,
avishay

thanks,
how can i connenct the new output type to Return to Vendor process ?

Debit Memo in Return to Vendor Process

Hi!
What is the best practice for creation of the debit memo in the Return to Vendor process?
Is it created from A/P, or is it created from SD (with reference to the outbound delivery)?
Thanks,
Anisha.

Hi,
Return to the vendor,
If u have done MIRO, then credit memo has to be raised for the qty & price that has to be returned
otherwise directly u can send returns if u have not done MIRO
thanks

Trigger mail to vendor's company correspondence email for debit memos

Hi
We are issuing output for debit memos through MR90 for external send (nacha = 5)
An email is sent to the vendor's email id maintained in the first page of XK02. However the email needs to be sent to the company correspondence email id (LFB1-INTAD). The print program is standard and we couldn't find any BTEs being used during the transaction MR90. Please suggest solutions.
Thanks
Pushpraj

it is due to some configuration and not becoz of coding

Credit and Debit Memo (Vendor and Customer)

Hi Team,
Credit Memo raised means - Debit to SAP/Company and Credit to Vendor/Customer?
Debit Memo raised means - Credit to SAP/Company and debit to Vendor/Customer?
Is this understanding is correct?
Thanks
Ram

Hi Ram,
Case Vendor:
Invoice : We receive goods and vendor is credited for the same. Goods and hence GR/IR a/c are involved.
Subsequent Debit : We receive goods and value addition to the received goods already invoiced is given by vendor. Here value direct debited to goods and credited to vendor. No GR/IR a/c involved.
Credit Memo : Goods return to vendor in case of damage or something. Here goods are involved. Vendor debit occurs and debit note is to be raised. Here GR/IR a/c is also affected.
Subsequent Credit : Here goods are not returned. Only value reduction of already invoiced goods. (in case of discount or something). Here GR/IR a/c not involved. Vendor debited and material is credited. Debit note is to be raised.
Hope it helps
sBk

BAPI to park Debit Note (Vendor credit memo) Doc Type: 'KG'

Hi All,
A friend of mine desperately needs to know any BAPI for parking Debit Note (Doc.type : KG Vendor credit memo)... Please let me know if you know about any BAPI / Funcation module to do it and a little chunk of sample code will surely help me a lot....
Thanks in Advance,
Regards,

Hi Savitha,
Well, we have experiemented with this BAPI "BAPI_INCOMINGINVOICE_PARK" earlier, but we found out that it dose not work properly for Service Orders; also it dose not seem to post proper debit note. Anyways, we have used another BAPI "BAPI_ACC_GL_POSTING_POST", it worked but it posts the debit note (Vendor Credit Memo) but we only want to park the debit note and let the user review it and then the user can post it manually or so afterwards...
Regards,
Athar

Billing a Debit Memo to a Vendor in CRM

Hi,
I am creating a warranty claim document from a service confirmation document in CRM 7.0
Once the claim is approved i am triggering a debit memo doc which can be billed in crm.
Now while creating an invoice i am getting few errors as shown below:
Error in document: BEBD 0090000158CRMB CDVCLNT501 ( Message Class RW / No. 609 )
Object not known in CO ( Message Class IAOM / No. 028 )
Postings to account 210040 (company code 2070) are only possible in currency EUR ( Message Class F5 / No. 353 )
Account 560001 requires an assignment to a CO object ( Message Class KI / No. 235 )
I have also done the CO integration for warranty claim doc.
Any hints will be appreciated.
Regards,
PP

Hi
A Billing type is cancelled by its Cancellation Billing Type, which is specified in the Billing Type details screen (VOFA).
In standard, Credit memo(G2) is cancelled by Cancellation Billing type(S2).
So, check in VOFA for billing type G2, whether Cancellation billing type S2 has been proposed/maintained.
Create cancellation (VF11) for G2 and system by default will create S2 type of Billing.

How to create Debit Memo in SAP.

Hi Experts !
We wanted to create a debit memo even after closing a purchase order i.e. payment is made to vendor.These debit memos are mainly related with pricing differences and overshooted logistics cost. We can make use of Subsequent cr/dr function, but it requires an invoice/credit memo from vendor and we can enter this as subsequent credit/debit. But in our case we need to send a debit note to the vendor. Remember it has to affect A/P and Cost accounts in this transaction. I request you to kindly help me in this regard.

hai chalam,
you can create a debit memo to the vendor after closing the po also.
Under Financial Management --> you will find create credit memo in that you will find document type for debit memo, enter document type, like that u can create debit memo
if vendor is one time vendor he will returns the amount as per debit memo, or if he is a regular vendor it will be converted as down payments or amount will be reduced in the next invoice.
hope this will help You.
with regards
srinivas

How to create debit memo in SAP R/3

Hi Experts !
We wanted to create a debit memo even after closing a purchase order i.e. payment is made to vendor.These debit memos are mainly related with pricing differences and overshooted logistics cost. We can make use of Subsequent cr/dr function, but it requires an invoice/credit memo from vendor and we can enter this as subsequent credit/debit. But in our case we need to send a debit note to the vendor. Remember it has to affect A/P and Cost accounts in this transaction. I request you to kindly help me in this regard.

Hi,
I am trying to understand your requirement; You want to pay the vendor after the PO is closed(Del Comp;Inv recieved & Payment done). The payment has to be done because of Pricing diff/overshooted logistics.Did you receive a revised invoice for this? How this is reflected in the system?
Warm Regards
Anup Varghese

Credit/debit memo request

hi,
1) credit memo request - After create invoice in vf01, then if credit memo needed, must create credit memo request in va01 then only can create credit memo in fb75?
2) debit memo request - After create invoice in vf01, then if debit memo
needed, must create debit memo request in va01 then only can create debit memo in fb70?
3) credit/debit memo can only be created after credit/debit memo request is created?
4) if credit/debit memo not created in fb75/fb70, where in sd can create?
5) credit/debit memo request done via which tcode if not va01.
thanks

Hi Eliana,
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.
Credit memo and debit memo is created used the T.Code VF01, in which we have to choose the billing type as Credit Memo or Debit Memo.
Credit Memo Request or Debit Memo request are created using T.Code VA01, in which we have to select document type as G2 or L2.
Hope this gives you some idea.
REWARD IF HELPFUL.
Regards,
Praveen

Credit memo and debit memo

Can some one kindly explain the img config step by step and how to check this setting in easy access.
Thankyou in advance
Rewards are assured
Best regards,
R.Srinivasan

REFER BELOW REWARD IF HELPS
Debit note and Credit note? What is the purpose? How we create?
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.

Credit Memo and Debit Memo in AP and AR

Hi ,
Can some please explain the difference between debit memo, credit memo in AP and AR. Please explain with examples......
Regards,
Anil

Hello.
A CM in AP represents a credit in your favour, normally issue by your vendor, with the following accounting:
DR Liability
CR Cost
You can deduct the CM by including it in a payment or, if you vendor send money to pay it, you can create a Refund payment type.
A CM in AR represent a credit in the favour of you customer, normally issue by you, with the following accounting:
DR Revenue
CR Receivables
Your customer, while sending you a payment, may include the CM in that payment, thus reducing it's amount.
Hope it helps.
Octavio.

How to exclude the debit memo & credit memo out of COPA report (KE30)?

As captioned, now the current KE30 default transfers all the data from sales orders interfaces (via VA01), such as common sales order, 3rd party drop shipment, credit memo and debit memo etc.
Is there any idea to exclude the quantities display in KE30 towards Credit memo and debit memo? An user exit?
Thanks for the great input...

kissorkick,
You need to clear some concepts in COPA.
A similar example for you, COPA likes a supermarket, vendors supply stuff (data of billings etc) into the supermarket, then you select the stuff you want (Report result) by putting them into the shopping trolley. And KE30 likes the shopping trolley.
Now the question, do you wish the vendors do not supply certain stuff (credit meno etc) into the market or you just do not put the stuff into your shopping trolley only? Configure by Tcode KE4W for the former case or create the report in Tcode KE30 with certain selection rule for the later case.

Problem in Payment Run with Debit Memos

Hi Every one
I am facing the problem in payment run in which vendor debitmemos were picked up but they are in the exception list. I was observing it in various vendors and have tested in QA that as well when there is an invoice to be paid these debit memos automatically adjustedagainst those invoice and hence net amount is being paid. The problem is these debit memos were generated in exceptional list about an year ago but at that time they were not considered in payment as they had no invoice against it to net off. But after that everytime they run payment run they come in this exceptional although there is invoice against them to net off the payment. Can any body help me out in this regard what could be the possible reason for this and any solution for this. Thanks in advance.

Hi,
In F110 while enteingr the parameters in the free selection choose the document number in the Field name
and give the document numbers of only invoices. dont include the debit meoms.
then you will not get the exception list at all.
Regards,
Padma

System don't allowed vendor debit balances

Hi SAP Gurus
How to configure the system so that it won't allowed debit balances of Vendors.I mean to say any posting for example debit memo will be stopped if the vendor balance is going in negative.
Thanks
Anant
Edited by: Anant Agarwal on Jan 8, 2010 4:23 AM

Dear,
There is no standard function available for accounts payable as it is credit management for customer.. You will have to go for custom development because at the time of document posting system has to check balance in vendor account.
Regards,
Chintan Joshi,

Vendor Debit Memo

Similar Messages

Maybe you are looking for