Vendor - "Do not use communication number" option - Internet Address

Hello,
I'm trying to use this option in vendor master in order to have many addresses saved, in order to use them according to different criteria.
According to field description, If this flag is set, the corresponding address shouldn't be used in the process , but currently it doesn't work. System sends a message to all addresses even the flag is set.
Could anyone help me?
Many thanks!

Please see if SAP note 763007 helps
Edited by: Shailesh Rajan on Jun 30, 2011 1:36 PM
Edited by: Shailesh Rajan on Jun 30, 2011 1:37 PM

Similar Messages

My iMessage is not using my number.

So i got an ipad but its not using my number on imessag. Instead it's using my mom's number and i've tried changeing it but my number doesnt show up in the option of recievers and i've found out it's the same on my Mac. My number works fine on my phone but nothing else. What can i do to fix this? And if it helps my mom also have an iphone.

Do you have your own Apple ID? If not logout of your mother's apple id, then create a new apple id for yourself. When you have that you can set your number.

My iPhone 4S keeps taking my credit, im not using Safari or any internet apps, my 3G is turned off but it is still taking my credit. What's it doing?

My iPhone 4S keeps taking my credit, im not using Safari or any internet apps, my 3G is turned off but it is still taking my credit, i topped up by ten pounds yesterday and it has already 6 pounds?! Im on Orange (EE)! Someone help please? Thanks

Try restarting the phone
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

Vendor codes not used

Hi,
I would like to generate a list of vendors, where is no transactions posted for a long period. This is kind of Aging report to find vendors codes which are not used for the past few months.
Kindly let me know if there is a standard report.
Thanks & Regards

Dear,
Check ME2L report.
With help of this report you can search purchase order list of vendor.
Due to this you can analysis that how many vendor codes are used for purchase order and other transaction.
Also check FBL1N.
Regards,
Mahesh Wagh.

Can i connect 3 ipads, but i want them to beable to facetime without using my number or email address?

Is there away of having 5 devices on my accout, but also have there on number. So when my sone facetimes my mum she dosen't think it is me?

You can try to go to yahoo or google and create few emails - [email protected] [email protected] and so on.
I do not know if you need to make them an apple id's(I do not think you do) but I use my and my wife's ipads the same way and we are on one account, but I can facetime her from my [email protected] to her [email protected] There is an option to add email and all you need to put in in every device corresponding email address. Make sure that they also know that only their email needs to be checked, to avoid future problems.

Generating SOAP Envelope when DO NOT USE ENVELOPE option is marked

My scenario: SPROXY => XI => 3rdParty WebService. Communication is synchronous. I've a problem with soap envelope. It is required by webservice, but when I use standard soap envelope generated by SAP I've a problem with receiving response from webservice.
So I want to create my own envelope. For this reason I've used DO NOT USE SOAP ENVELOPE option. Now the challenge comes. How can I create my own soap envelope?
Do you have any working example? Soap envelope should be added to message send from XI to 3rdParty WebService.
Helping answers => a lot of points

I'm talking about HTTP header.
When I'm sending SOAP request from SAP my whole message looks like when I use soap envelope
POST / HTTP/1.0
Accept: */*
Host: 192.168.132.179:54000
User-Agent: SAP-Messaging-com.sap.aii.messaging/1.0505
Content-ID: <soap-02cce7702b1a11dd9902000c29ee261e[at]sap.com>
Content-Type: text/xml; charset=utf-8
Content-Disposition: attachment;filename="soap-02cce7702b1a11dd9902000c29ee261e[at]sap.com.xml"
Content-Description: SOAP
Content-Length: 259
SOAPACTION:
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header/><SOAP:Body><ns0:Sd2Ids_SzfExport xmlns:ns0='http://www.dat.de/sdii/ids/Sd2SOAP.wsdl'><arg1>1234567899-0</arg1><arg2>1</arg2></ns0:Sd2Ids_SzfExport></SOAP:Body></SOAP:Envelope>
Always after such request I got and HTTP 411 error.
In opposite, when I'm sending request from e.g. Altova or SoapUI, my message looks:
POST / HTTP/1.1
Content-Type: text/xml; Charset=UTF-8
User-Agent: XML Spy
Host: 192.168.132.179:54000
Content-Length: 489
Connection: Keep-Alive
Cache-Control: no-cache
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <SOAP-ENV:Body>
 <m:Sd2Ids_SzfExport xmlns:m="http://www.dat.de/sdii/ids/Sd2SOAP.wsdl">
 <arg1 xsi:type="xsd:string">1234567899-0</arg1>
 <arg2 xsi:type="xsd:string">1</arg2>
 </m:Sd2Ids_SzfExport>
 </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
After that request WebService response is correct.
You can find such differences (except Content-length which is a result of XML message formatting) in those two headers:
- for first is used HTTP 1.0 protocol for later 1.1
- in SAP header an info about attachment is added
After a lot of test I thing that those attachment info in header of HTTP is causing a problem. So I want to use DO NOT USE SOAP ENVELOPE option to generate HTTP header without Content-Disposition and generate SOAP Envelope manually.

Sql query not using parallel option

I am working in oracle 11.2.0.2.0 .
I am trying to execute one query using parallel options but in explain plan it is not using that PX option ...
UPDATE /*+PARALLEL (emp,4) */
cust_sku_allocation_data emp
set emp.mean=
(select sum(dep.stock_to_sales)/count(distinct dep.destination_facility)
FROM cust_sku_allocation dep
WHERE dep.stock_to_sales_ratio NOT IN (0,9999)
AND dep.sku_id = emp.sku_id);
Any idea where to check..

Sorry I meant:
You cannot parallelize UPDATE or DELETE operations on a nonpartitioned table, or when the update only affects 1 partition in a partitioned one.

Error in mail adapter whilst using 'mail package' option

Hello,
I am using receiver mail adapter. Its working fine when I do not use 'mail package option'. But when I use mail package option, this error comes in
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: No data is allowed on this structure level (2) at XML element Mail,Subject
This is the sample of payload:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>Data Update to Portal failed</Subject>
<From>sender email id/From>
<To>receiver email id/To>
<Reply_To />
<Content_Type>text/plain</Content_Type>
<Content>Error: Undefined Error</Content>
</ns1:Mail>
Any idea what should I do to get it working. Alternatively, is it possible to use the dynamic value into the email 'TO' field.
Thanks in adavance

Hi All,
I need the same info in my requirement . The Scenario is MAIL > FILE . THe Vendor sends the email with Invoices ( An Attachment) to a mail server and the attachment has to be moved to the network folder (File )
Here , I used IMAP4 Protocol in MAil Sender CC
I wanted to know is it required to use :localejbs/ AF_Modules/PayloadSwapBean and any module configuration to petch the attachment ?

SOAP Adapter: DO not use soap envelope

Hi Guys
I have a scenario, which calls a webservice from my ABAP Proxies, the twist in this is that SOAP request expects license info into the header of SOAP envelope, I could achive this by XSLT mapping in the receiver SOAP adapter I selected the option "Do not use SOAP envelope" and could do the call.
Due to this the response received from the webservice is treated as payload, as shown below...
response message payload:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Header xmlns="http://schemas.xmlsoap.org/soap/envelope/">
 <SubscriptionInfo xmlns="http://ws.strikeiron.com">
 <LicenseStatusCode>0</LicenseStatusCode>
 <LicenseStatus>Valid license key</LicenseStatus>
 <LicenseActionCode>0</LicenseActionCode>
 <LicenseAction>Decremented hit count</LicenseAction>
 <RemainingHits>18</RemainingHits>
 <Amount>0</Amount>
 </SubscriptionInfo>
</Header>
<soap:Body>
 <getRateResponse xmlns="CurrencyRates">
 <getRateResult>44.945</getRateResult>
 </getRateResponse>
</soap:Body>
</soap:Envelope>
and when i am trying to do the response mapping, it is not able to read the value.
Anyone having any idea, on how we could do this.
Thanks
Dheeraj

Hi
I am sorry for replying in so late, was busy with some projects.
I got few mails and this post is cathing up again, so thought of giving the solution I followed without any adapter module or anything, simple plain XSLT mapping.
Integration Repository
1. Created data type and message type for Outbound Interface
2. Imported the WSDL
3. Created an XSD out of the sample response I got by calling the WSDL (this you can do from any tool available, i used the strikeiron website), pls refer below to see the XSD below, and you will have to use the message type envelope from it.
4. Most Important step, created 2 XSLT mappings, one for request and the other for response., Pls refer below for both these mappings.
5. did the interface mapping
Integration Directory
1. pls configure your scenario as normaly you do, and while you configure the communication channel for your soap receiver, make sure you click on the do not use soap envelop option.
thats it done.
XSLT Request Mapping
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP-ENV:Header>
 <LicenseInfo xmlns="http://ws.strikeiron.com">
 <RegisteredUser>
 <UserID>xyz</UserID>
 <Password>xyz</Password>
 </RegisteredUser>
 </LicenseInfo>
 </SOAP-ENV:Header>
 <SOAP-ENV:Body>
 <getConversion xmlns="CurrencyRates">
 <FromCurrencyCode>
 <xsl:value-of select="//fromCurrency"/>
 </FromCurrencyCode>
 <ToCurrencyCode>
 <xsl:value-of select="//ToCurrency"/>
 </ToCurrencyCode>
 <Amount>1</Amount>
 </getConversion>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>
 </xsl:template>
</xsl:stylesheet>
XSLT Response Mapping
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="CurrencyRates" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <xsl:template match="/">
 <ns0:MT_Cur_res xmlns:ns0="http://www.april.in/WebService/SOAPHeader">
 <Rate>
 <xsl:value-of select="soap:Envelope/soap:Body/a:getConversionResponse/a:getConversionResult"/>
 </Rate>
 </ns0:MT_Cur_res>
 </xsl:template>
</xsl:stylesheet>
Webservice Response XSD
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws.strikeiron.com" xmlns:ns2="CurrencyRates">
<xs:import namespace="CurrencyRates" schemaLocation="ns2.xsd"/>
<xs:import namespace="http://ws.strikeiron.com" schemaLocation="ns1.xsd"/>
<xs:element name="Envelope">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="soap:Header"/>
 <xs:element ref="soap:Body"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Header">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns1:SubscriptionInfo"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Body">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns2:getConversionResponse"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
</xs:schema>
let me know in case somebody gets stuck somewhere for this scenario.
Take Care
Dheeraj

Is there any way to turn off airport without removing the electrical plug and should I unplug it when not using it??

I just got the 5G Airport Extreme base station. Set-up was a snap! Maybe 10-15 minutes compared to a friend who got another name brand for his pc and took a couple hours, even having to call customer support! Been working great so far, but am concerned about never turning it off, not only about the possibe harm that could be done to the unit, but also about having an active, open Internet connection 24/7. Before I got my Airport Extreme I was using Ethernet cable with a cable modem that could be placed on "standby" whenever I was not using my Mac for Internet, but since AE5G doesn't have a power switch on the unit, have left it turned on rather than unplugging it by the electrical cord. I did turn AirPort "off" in the menu bar when not using it wth my Mac, but AE is still apparently constantly active, showing a steady green light. Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
Thanks for the help!

Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
That is a matter of debate, since there are two schools of thought regarding power status on a router.
One school maintains that you can turn the device on and off as needed. Makes sense for some folks. The advantage of this is that it might save a bit of electricity, although the Extreme draws very little power most of the time.
Another school believes that there is a reason why Apple did not even place an "Off" switch on the device. It's designed to run 24/7.
Leaving the Extreme on will place far less stress on the electrical components in the device since they stay in an "idle" state most of the time, drawing very little current. Powering any electrical device up sends a sudden rush of current through the device, which places far more stress on a device than if it is simply left on.
It depends on your priorities. If you want to save electricity, your decision is already made. If you intend to prolong the life of the router, then consider leaving it on, as Apple intended.
A compromise position might be to leave the Extreme on most of the time and power if off for long weekends or vacation periods when you will be away. Remember that the Extreme must establish all new network connections every time that it powers back up....perhaps another reason to simply leave it on.

"Do Not Use Envelope" feature: WS Receiver vs Soap Receiver

I have a scenario that I need to call web service on receive side.
When I use Soap adapter, need to use mapping program to compose SOAP message mannully:
Envelope
   + Header
     ++MessageID
     ++Action
   +Body
     ++FistName
     ++FistName
In SOAP receiver adapter, I do not use PI envlope, so I have to choose "Do Not Use Soap Envelope" option.
When I use WS receiver adapter to call the same web service, I could not find the way the Soap adapter does.
Anyone tried to use same feature in WS adapter ?
Thanks
Liang
Edited by: Liang Ji on Oct 27, 2011 4:33 PM

>Anyone tried to use same feature in WS adapter ?
IMO, WS adapter does not provide "Do Not USe Envelope option" in 7.1 as well in above versions.   You might want to see other experts opinion.

Do Not Use SOAP Envelope doesn't show on SOAP Parameters

Hi!..
Somebody knows why the Do Not Use SOAP Envelope option on conversion Parameters for SOAP Adapter isn't there?...I have XI 3.0 SP19 and I'd seen on a lot of notes and how's to that there is a kind of option. I need the functionality that that check does but I can't find it.
I Only have Keep headers, Keep Attachments, Use Encoded headers and Use query string.
Thanks in advance..
Carlos.

HI Carlos,
I've got same problem, which metadata should I reimport?
cheers,
Edu

Do not use SOAP envelope

I have a scenario in which a Webservice is called from PI; as the webservice request some specific fields in the SOAP-header I have found that I should check the "Do not use SOAP envelope" option in the SOAP-receiver channel.
I have searched the forum/SDN for examples of how to create the SOAP envelope including the required header fields. I have found some posts refering to XSLT-mapping; however I'm not famliar with XSLT so I'm looking for an example or guide how to create the SOAP envelope for this scenario.
Can anybody be of assistance?
Kind regards,
John.

Here is a sample of an xlst I used for this purpose.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header/>
<soapenv:Body>
 <p262:operationName xmlns:p262="http://othersite.com">
 <xsl:apply-templates/>
 </p262:operationName>
</soapenv:Body>
</soapenv:Envelope>
</xsl:template>
<xsl:template match="shippingOptions">
 <shippingOptions>
 <xsl:apply-templates select="destination" />
 <equipmentId><xsl:value-of select="equipmentId"/></equipmentId>
 <xsl:apply-templates select="origin" />
 </shippingOptions>
</xsl:template>
<xsl:template match="destination">
 <destination>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </destination>
</xsl:template>
<xsl:template match="origin">
 <origin>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </origin>
</xsl:template>
</xsl:stylesheet>

Reading Vendor Classification Note

Hi
I Created Vendor Classification Note using XK02. Now i need to read all those Notes which was created to vendor. The Objects details are available in S00D table but i am unable to read actual data in that object.
Can any body guide me how to read the data related to objects.
I tried using READ_TEX, SO_ATTACHMENT_LIST_READ and SO_ATTACHMENT_READ function modules but no use.
Thanks in advance
Edited by: BOGA UMASHANKAR on Apr 18, 2011 3:38 AM

CLFA1 for vendor
Regards
Ankur

Vendor - "Do not use communication number" option - Internet Address

Similar Messages

Maybe you are looking for