Vendor down payment request to MM purchase order

We want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
Thanks
Martien
Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

Dear Martien,
we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
We are doing a workaround:
We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
If you find a other solution, so please tell me.
Best regards.
Manuel

Similar Messages

  • Down payment request to the purchase order as a whole for f-48

    Hi Gurus
    I want to post vender down payments request and make the relation with the purchase order.
    Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
    As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
    Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
    Actually looking for any screen exit is available for that or any other way.
    Regards
    RK

    Check for FI user exits in this link
    http://wiki.sdn.sap.com/wiki/display/ERPFI/UserExitsin+FI
    Check also this links
    USer Exit / Badi F-47  & F-59
    http://wiki.sdn.sap.com/wiki/display/ABAP/Find%2bApplication%2bclass%2bwith%2bExits%2band%2bBadis%2bfor%2ba%2bTransaction
    Edited by: Jeyakanthan A on May 25, 2010 1:03 PM

  • Down payment request to the purchase order as a whole

    Hi Gurus
    I want to post vender down payments request and make the relation with the purchase order.
    Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
    As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
    Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
    Regards
    RK

    Hi
    Actually looking for any screen exit is available for that or any other way
    Rgs
    RK

  • Down Payment Request for a Purchase Order Type K

    I am making a down payment request to a supplier where the purchase order is of type K.
    At the time of recording the payment request (A-47) the transaction meets the cost center of the purchase order and, because of having a message class (KI 281), blocks the release.
    The question is:
    At present the validation of the message class (OBA5) should validate the account of the purchase order or the supplier's account of the F-47?
    Rgs,
    Ivair

    Hi
    KI 281 message says that the GL account has to be created as a cost element. So, please create a cost element for the GL you are using (KA01). Hope this is the problem.
    If this does not work, please let me know.
    Thanks,

  • Down payment request based on purchase order

    Dear all,
    How to make down payment request(F-47) based on purchase order(not line item wise) ?,
    Currently in F-47 it is asking to enter amounts purchase
    order line item wise,because downpayment is made only for entire purchase order value not line item wise.
    How to solve this issue ?
    Jeyakanthan

    Hi,
    This is SAP standard functionality. you have to specify line item, though you specify line item system will check for whole PO. and while posting invoice you will get information of the down payment.
    Regards,
    Raj

  • Vendor Down Payment Request on WBS (F-47)

    Dear Fellows:
    I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100  and i create request for 101, system allows it and post the document.
    Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
    any good solution to it would highly be appreciable.
    Regards.

    Hi,
    The budget availability check is done only against the assigned values and
    Following entried does not contribute to the Assigned value
        V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
        D: Delivery
        S: Settlement to object with no budget control
        R: Revenue cost element
        C: Cost element is exempt cost element
        M: Minimum from actual + commitment and plan per order value update
        P: Plan value is not on apportioned order / network
        B: Plan Costing Single Position
        S: Funds Commitment in Balance
    So the down payment is not covered for the calculation of the assigned value.
    Hence no check is carried out for the Availability check.
    hope its useful.
    Reward points if useful.
    Thanks..

  • Vendor down payment request over PO value

    Hi All,
    I have a requirement for vendor down payment request amount compare to PO value checking.
    I have PO with total value - 600 USD.
    When I create down payment request using F-47, I input amount 1000 USD.
    The system never show me any message.
    I want the SAP to block me from posting down payment request over PO value.
    I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
    Anyone can help me, what am I missing here ?
    Thanks,

    Hi,
    You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
    If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
    Regards,
    Amit

  • Vendor down payment request Error

    Hi all,
            i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
    Kindly help me,
    Thanks in advance
    Ani Varghese

    Hi,
    The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
    You might not have maintained the GL Accounts for this. Maintained it in OB40.
    Regards,
    Amit

  • Vendor Down payment request

    Hi,
    I have 2 queries regarding vendor down payment request F-47
    1) Want to create DPR on header level (We have ECC.6 No enhancement package)
    2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
    I already active F5 373  message into error.
    Thanks,
    Farrukh khan

    Hi,
    You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
    You are requested to do create DPR as per below given screen shots
    Press Enter
    Click on
    Hope, this solves your issue.
    Regards,
    Tejas

  • Badi/User-exit for vendor down payment request in f-47

    hi all,
    is there any badi/user-exit available for vendor down payment request?
    I need to trigger a workflow when a vendor down payment request in transaction code F-47.
    how can i do this?
    Pls guide me.
    Thanks & regards,
    Raj

    Did it using a business transaction event

  • User-Exit/Badi For Vendor Down Payment Request

    hi All,
    Is there any user-exit or badi available for vendor down payment request?
    tcode:f-47.
    please let me know.
    Thanks & Regards,
    Raj

    I want to trigger an event for workflow when
    a vendor down payment request is created in
    *tcode f-47.*
    Well if you are not able to find the correct enhamcement spot then you can approach as below
    When ever you create a New Item In the Tcode F-47 the  if you succesfully saves the data then it prompts you a message like below
    *Document 1700000000 was posted in company code 2100*
    So instead of searching for Exits or BAdi's try to Start workflow by using the message
    for this all you need to bind the message and the Workflow , for this you have use the transaction SWUY it is a wizard where you need to specify the Message class and the message number

  • Partial payment for Vendor down payment request

    Hi Gurus
    How to do partial payment for vendor down payment request  using F-48
    If i enter partial amount next time same request is not appearing in the list.
    Pls guide me. Reply will be appreciated with full points
    Thanks in advacne
    Sneha

    Hi Ravi
    Thanks for info
    My doubt is MM is creting Down payment request using F-47 For ex  Rs100000
    for this request using F-48 i want to pay partialally means for Rs50000
    Balance i want to pay it later, How this can be done.
    Pls guide me
    Rgds
    Sneha

  • Workflow for vendor down payment request

    hi All,
    i need to develop a workflow for vendor down payment request as there is no standard workflow available.
    But not able to find any business object for it. Is there any standard business object available for it?
    If no what are the steps that i should follow to create a business object for vendor down payment request?
    plz guide me.
    Thanks & Regards,
    K.Perumalraj
    SAP Workflow Consultant

    BKPF is the business object

  • Ehancement Spot for Vendor Down Payment Request F-47

    Hi
    I am trying to post a DP Request to Vendor with reference to a PO Document, which consists of various taxes. PO Base amount is 150 and Tax value is 25. When I am trying to pass a DP Request for more than 150 system is giving the error message "Order Value will be exceeded". Message Number is F5373.
    If I  change this error message to warning system will throw a warning message if the DPR value exceeds 150. I can proceed further but it will not restrict if another DP Request with reference to the same PO is passed.
    How to restrict the system to accept only one Down Payment Request with reference to any given PO ?
    Are there any user exits to be used ? if so please let me know. Also the enhancement spots in order to control multiple DP Requests against the same Purchase Order.
    Thank you
    Gemini

    Hi,
    You can create a validation (OB28), checking with user-exit that you'll create, whether there are down payments posted against PO. Pre-requisites could be the document type of down payment that you're using in the system or the trnsaction (F-47) itself.
    Regards,
    Eli

  • Vendor Outstanding Payment with reference to Purchase Order

    Is there any standard report to see outstanding payments for vendors? I wanted to see purchase orders no, miro no, vendor, clear amount, pending amount, clearing document etc. i tried FBL1N but i didnt get po no. there. Please Guide.

    There is no standard report which gives your requirement.  You will have to develop the report thru help of abaper or create a abap querry.

Maybe you are looking for

  • Can no longer access Netgear Router

    We have been using a Netgear MR 314 router for years for both Wireless and Ethernet wired activity on our G4, G5 and MacBooks. We recently upgraded to Safari 4.0.1 on all 3 machines. Internet, file sharing, screen sharing, home networking all work ju

  • How to synch. contacts from Outlook

    Trying to Synch contacts from Outlook

  • Wifi Network Problems CoreDuo iMac 20"

    Just upgraded to 10.5 and now my iMac will not recognize my wireless network. In fact during a clean install it didn't find my router or access-point. I never had this problem before I upgraded. The only way I can get it to work is going into the "as

  • Photoshop Elements 10 says I have already activated it on too many computers.

    I just bought Photoshop Elements 10 at Walmart I have only installed it on ONE computer and thats all. Does anyone know how to fix this? I had a open case a while back but I got busy and it was automatically closed I just want this to be fixed so I c

  • Looking to add second SuperDrive

    Just purchased a new Mac Pro on 8/20 and am currently in the process of making a few upgrades via OWC. I know I'm going to purchase 8 gigs of RAM: http://eshop.macsales.com/item/Other%20World%20Computing/64FB4MPK08GB/ Now I'm researching a second opt