Vendor evaluation - main criterion : Delivery ; Sub criterion : On time del

hi
We have following requirement related to Vendor evaluation - main criterion : Delivery ; Sub criterion : On time delivery
The requirement is:
Deliveries late by 7 days should be considered as on time.
pl suggest

Hi Chintu,
Thanks for ur reply.
scores i have configured for qty.variance as,
2     Qty. reliability                      100
2     Qty. reliability     5.0-              90
2     Qty. reliability     10.0-      80
2     Qty. reliability     20.0-      75
2     Qty. reliability     40.0-      50
2     Qty. reliability     50.0-      40
2     Qty. reliability     75.0-      20
2     Qty. reliability     80.0-        1
My dought is, For on on-time delivery we are not maintaining any smoothing factor right?
So, Which smoothing factor we should consider for on-time delivery?
I have maintained smoothing factor for
Timeliness service - .20
Quantity Reliability - .30
Shipping Instructions - .25.
Thanks in Advance.
Edited by: SAPr3.HELP on Nov 19, 2009 4:43 AM
Edited by: SAPr3.HELP on Nov 19, 2009 8:25 AM
Edited by: SAPr3.HELP on Dec 1, 2009 6:30 AM

Similar Messages

Vendor evaluation on JIT delivery

In case of JIT scenario how vendor rating on delivery, as schedule lines are dynamically changed in past and future.
Does this mean that for a JIT scenario vendor is suppose to be delivering on time? And rating could be affected. Is there sufficient justification for this functionality not being available? Most of the automotive industry works on daily JIT schedules. Clients say that it is important for the on-time and quantity reliability of vendors to be evaluated based on Goods receipt against JIT call. How vendor evaluation can be performed based goods receipt using JIT call.
Rgs

Hi Pankaj,
I found a table called T147K ..
I am passing xyz Purch Org. and Scoring Method is 3 (on-time delivery)..
Here I found that
Percentage Score Percenta
000        100   100.0
010        90    101.0
020        95    102.0
100        80    110.0
200        60    120.0
300        40    130.0
400        20    140.0
500         5    150.0
999         1    199.9
050        95    95.0
100        65    90.0
200        75    80.0
300        60    70.0
400        40    60.0
500        20    50.0
600         5    40.0
999         0     0.1
which one we need to consider when .. I am doing the calcuation to get percentage for vendor...
Vendor Percentage =
( actual Del date - statistical del date) / Std del time var * 100.
Raghunath.S
Edited by: Raghunath Shyamala on Aug 29, 2008 1:07 PM

Vendor evaluation - Service

hi
we have following requirements:
1) Addition of new sub criteria for the main criterion "Service"   (we already use standard sub criterion --- timeliness of service and quality of service).
       i) Legal requirements
      ii) Safety
     iii) Damanges / Penalty
These sub criterion should appear during Service entry sheet (as timeliness of service and quality of service appears) and user will enter the scores against this sub criterion.
Pl suggest.
2) When Service will be procured by central purchasing group ---vendor evaluation should consider following sub criterion only
     i) Timeliness of service
    ii) Quality of service
When Service will be procured by local purchasing group ---vendor evaluation should consider following all sub criterion
   i) Timeliness of service
    ii) Quality of service
iii) Legal requirements
      iv) Safety
     v) Damanges / Penalty
Pl suggest how we can achieve this
regards
Pravin

Hi,
the enhancement MM06L001 comprises four function exits, which are invoked
during the calculation of the scores for the subcriteria.
In order to satisfy your business process you need to write your own
coding into the function modules
1. EXIT_SAPLMEL0_001
2. EXIT_RM06LBAT_001
3. EXIT_SAPMM06L_001
4. EXIT_RM06LBEW_001
Regards,
Edit

Vendor Evaluation with QM - Tables

Hello
Can any one help the table information such us vendor evaluation main criteria and sub-criteria. Information stored in the audit lot , rejections and complaints etc. Please i am looking for only Vendor Evaluation with QM - related Tables information only .
Thanks for your help
Nic

T147 - Control table for vendor evaluation
T147A - Definition for main criteria
T147B - Text for main criteria
T147C - Definition for sub-criteria
T147D - Text for sub-criteria
T147E - Definition of weighting keys
T147F - Description of weighting keys
T147G - Main criteria
T147H - Interval for delivery time statistics
T147I - Definition of sub-criteria for the main criteria
T147J - Weighting keys
T147K - Assignment: Percentage X Score
T147L - Intervals for quantity reliability
T147M - Definition of scope of list
T147N - Text for scope of list
T147O - Scope of List
T027A - is the table for defining shipping instructions
T027C - specifies the points scores for compliance

Vendor Evaluation Delivery Subcriteria Shipping Instr and Adher to Conf Date

Hi experts,
I have Vendor Evaluation configured for Delivery subcriteria Shipping Instr and Adher to Conf Date. These are set to scoring method 6 and B respectively. In the Purchasing Org Data, for subcriteria Delivery, I have equal weighting set for all 4 subcriteria (on-time del, quantity reliability, shipping instr, and adher to conf date). When I run the vendor evaluation in ME61, and look at the evaluation of subcriteria, I see a score and weight for on-time delivery, and quantity reliablity. But for shipping instructions and adher to Conf Date, there is no score and the weight is 0.0. Does anyone know why there is no weight shown? I know I have to maintain the scores for shipping instr and adher to conf date but I should see weight as 25% since I set these 4 subcriteria to equal weighting. Can anyone help? Thanks!
Regards,
Julie

Hi,
As an example its not available, nor tried self. As a common rule - if a main criteria created and sub criteria exists, when you run evaluation for main - excluding a stage of sub is not possible.
Secondly try transaction code: ME6C
Help says: Set this indicator if you only want to display those vendors that do not have
an evaluation for certain main criteria. When you click on Execute, a screen allowing you to choose one or more main criteria appears. The missing evaluations for these criteria are then listed.
here you can selection option to include/exclude evaluation.

Goods receipt sub critaria in vendor evaluation

In vendor evaluation there is one sub-critaria goods receipt under main critaria quality, in this how system calcutae the tax.
i went through the sap help doc, in this it is mentiaoned that
"When you run an automatic re-evaluation for a vendor, the system selects all the incoming inspection lots for the vendor that lie within the validity period and calculates the average of the scores. The result is the vendor's score for the quality of goods received."
i m not understand with this. plz specify in your words and where we maintain the validity period?

Hi,
In the sub-criteria Goods Receipt, system dows not calculate tax. In the main criteria of Quality, if your material is maintained for quality inspection type 01, then system creates inspection lots for GRN. The score of each inspection lot is calculated based on you settings (For example based on usage decision). The system then saves these scores of each inspection lot. These scores are then averaged out for all the inspection lots those lie within the validity periods.
Hope this helps,
Regards,
Prashant

Vendor Evaluation Score ...???

Hi MM Gurus,
My client requires score calculationfor the vendor evaluation i.e., it has to show the working how it has arrived at the final score, to be clear systems works automatically and displays the final score based on certain main and sub criteria that working has to be shown in a table format
and what is mean by Market Price.. where can i get this in Vendor Evaluation.
Thanks in Advance,
Anthyodaya.

HI,
The information you need from vendor evaluation is contained in the criteria on-time delivery.
The market price is a dat you introduce in the info record.
There is a very good information in the online help:
[http://help.sap.com/saphelp_erp60_sp/helpdata/EN/8d/b97cde414511d188fc0000e8322f96/frameset.htm]
Best Regards,
Arminda Jack

Score system in vendor evaluation

Hi,
Please explain how scoring system works in vendor evaluation for criteria Delivery and sub criterias on time delivery and qty reliability.
Thanks in advance!
Regards,
Jana

Please check these answered links:
Vendor Evaluation Score ..
Vendor Evaluation Score ...???
Vendor Evaluation-Delivery Score
Edited by: Afshad Irani on Apr 21, 2010 1:58 PM

Delete score in vendor evaluation

Hi, everyone!
How can i delete vendor evaluation score for delivery?
After make evaluation, I delete a good reciept document (cancellation), so now I don't have movement document for this vendor.
If i make new vendor evaluation old score doesn"t change.
Thanks

Hi,
GO to Spro--->Material Management -> Purchasing-->Vendor evaluation ->define criterial>01 quality--> subcriteria ->03 Audit---> Scoring method -
>07 automatic determination from system audit.
but for that please create the inspection lot with 07 inspection type and do the UD .
with regards
Yashodhan

MM Vendor Evaluation Score Card Program RM06LBAT

Hello MM gurus,
I am trying to figure out what record selection criteria SAP uses in calculating a score in the Vendor Evaluation score card program RM06LBAT. We have our applicability period set to 090 days in configuration. Does the program look at records in S013 for the last 090 days from the run date of RM06LBAT? Or does the program look at records in S013 since the last vendor score card was generated? Is applicability period used in running the score card? How is the applicability period used in SAP for vendor evaluation?
We would like to run the score card program every 090 days (or once per quarter) and have SAP only evaluate scores for activity generated over the 090 day period.
I appreciate your assistance.
Regards,
Julie

HI,
The information you need from vendor evaluation is contained in the criteria on-time delivery.
The market price is a dat you introduce in the info record.
There is a very good information in the online help:
[http://help.sap.com/saphelp_erp60_sp/helpdata/EN/8d/b97cde414511d188fc0000e8322f96/frameset.htm]
Best Regards,
Arminda Jack

Vendor Evaluation With Non Standard Main and Sub Criteria

Hi Gurus
I have a requirement wherein I have to evaluate a vendor on non stanadard Main Criterias like
1. Productivity with sub criteria as Receipt / Excepected Yield, for which I have used Scoring method 2
2.Quality Standards with Sub Criteria,- Germination (%),Genitic Purity % , Field level flags, for which i have used scoring method 7 by activating user exit- MM06L001
3.Raw Seed to Clean Seed ratio, with the same sub criteria and with the above scoring method and user exit.
The weightages given to the above three are 40 , 35 and 25 respectively.
Can you please tell me how to calculate the values for subcriterias( for example for my main criteria 2. i want to assign the weightaghes for sub criterias - Germination - 50 , Genitic Purity %- 30, & Field level flags - 20, . along with smoothin factors.
I want to automise the whole process and run the evaluation in the background.
An early reply will be very helpful to me.
thanks and regards
Ashok Kumar Pitla

T147 - Control table for vendor evaluation
T147A - Definition for main criteria
T147B - Text for main criteria
T147C - Definition for sub-criteria
T147D - Text for sub-criteria
T147E - Definition of weighting keys
T147F - Description of weighting keys
T147G - Main criteria
T147H - Interval for delivery time statistics
T147I - Definition of sub-criteria for the main criteria
T147J - Weighting keys
T147K - Assignment: Percentage X Score
T147L - Intervals for quantity reliability
T147M - Definition of scope of list
T147N - Text for scope of list
T147O - Scope of List
T027A - is the table for defining shipping instructions
T027C - specifies the points scores for compliance

Automatic Sub-Criteria: PRICE HISTORY in Vendor Evaluation

Hello All,
Can anybody help me in understanding what actually the following mean in Automatic Vendor Evaluation!!
1) Effective Price
2) Calculated Effective Price
3) Actual Effective Price
4) Calculated Effective Price for a particular Vendor
I see all this in the following link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/8d/b97cf8414511d188fc0000e8322f96/frameset.htm
Under "How the System computes Scores:"
Under "Calculating Scores for Automatic Subcriteria:Overview"
Under "Price History (Main Criterion "Price")"
Thanks

Hi ZEYNEP,
1) Effective price - End price after taking all conditions (for example, cash discounts, delivery costs etc.) into account.
2) Total Price - Price arrived at after taking all discounts and surcharges into account
3) Total value = total quantity x price
When a price changes, the value of the stock changes, since the value is calculated from the price:
4) Effective (actual) price: Net price minus cash discount and plus miscellaneous provisions and delivery costs as well as non-deductible input tax
In simple - Total Cost - Expenditure on material till Goods Receipt (Procurement) and Effective cost - including all expenses till delivery from factory or some times till reach the consumer (vary depend upon the nature of business).
Here is an example
Material Price is $ 1000/-
& Discount is 10% and tax is 10% and freight is $ 50/-,Fixed( it may also %)
So Here the Material Price is called Gross Price $ 1000/-
Gross Price ($ 1000/-)- Discount {$ 100/-(10% of $ 1000/-)}= Net Price $ 900/-
Here Net Price $ 900/-
Tax $ 90/- ($ 900/- +$ 90 = $ 990/- is called sub-total)
Freight $ 50/-
$ 1040/-
The Total Price ($ 1040/-) is called Effective Price.
Hope this is helpful. Reward if useful.
Thanks

Vendor evaluation- where to put (see) sub criteria on which screen

Please can any one update on it.
Dear Friends.
I have configured vendor evaluation in following way .
1)     Price (main criteria) u2013 a) price level [60] b) price behavior [30] c)market behavior[10]
Que u2013 where we have to put above sub criteria a, b, c mans at which transaction level in sense that it will give me Ven. evaluation
2)     Quality (main criteria)- a) GR inspection [40] b)Rejection/complaints [40] c)Audit [20]
Que u2013 where we have to put above sub criteria a, b, c mans at which transaction level in sense that it will give me Ven. evaluation
3)     Delivery- a)Ontime[30] b)Qty reliability[40] c) shiping instruction[10] d) adhere to conf.date[20]
               Que u2013 where we have to put above sub criteria a, b, c mans at which transaction level in sense that it will give me Ven. evaluation
Regards,
MAhesh
Edited by: mahesh A on Jul 11, 2011 8:53 PM

Hi Mahesh,
the path is img.....mm......purchasing......vendor evaluation......maintain criterion for purchasing organizations
also please find some useful links for vendor evaluation
http://wiki.sdn.sap.com/wiki/display/ERPSCM/VendorEvaluationin+MM-PUR
Looking for Vendor evaluation steps
Vendor Evaluation Process
regards,
Adwait Bachuwar

Additional sub criteria for Vendor Evaluation tab in SES (ML81N).

Hi,
I like to add two additional sub criteria for Vendor Evaluation tab in SES (ML81N). Based on which vendor evaluation will be calculated.
1. Safety/Envt Upkeep
2. Morale
These two are added in SPRO->Purchasing->Vendor Evaluation ->Define Criteria. But not displayed in ML81N->Vendor Evaluation tab.
Existing criteria. 1) Quality of Service and 2) Service Timeliness are already available.
Thanks in advance.
Chetan Shah

Hello Chetan,
have you checked note 79166 "MM-SRV Hint: Vendor evaluation for service"?
Define an evaluation criterion for services in Customizing of the vendor evaluation to be able to use the vendor evaluation also for the services management.The main criterion must contain the determination methods 'C' (determination from the quality valuation of the service) and 'D' (determination from the timeliness rating of the service) in the sub-criteria.
Kind Regards
TomT

Vendor evaluation - sub criteion Calculation

hi ,
Our configuration like this :
vendor evaluation with un equal weighting keys.
1.price :50
2.quality: 30
3.delivery 20
1.sub :cat
Price level        40.0 %
Price behavior 60.0 %
2. Subcriterion               Wtg.
01 On-time delivery       50.0
02 Quantity reliability    50.0
from this can you expalin in detail how system calculates scores for this sub criteion level to get overall score.
also i would like to know about ranking ,avrge variance for this.
pls guide me
thanz in adv,
Aparji.

Hi,
For this criteria
as u r weightage is 50 -50 that means eual to price level and price behavior so system directly calcutaes the % variation and accordingly puts the score for sub-criteria.
now coming to the main criterial waitage is 50-30-20 accordingly system will treat the importance of the gain points.and add it in the overall score.
for more informatio u can gothrough the following document:
http://help.sap.com/saphelp_47x200/helpdata/en/8d/b985b0414511d188fc0000e8322f96/frameset.htm
regards,
sujit

Vendor evaluation - main criterion : Delivery ; Sub criterion : On time del

Similar Messages

Maybe you are looking for