Vendor Evaluation Plant Wise

Hi Experts,
We have a problem, we have multiple plants against one purchase organisation. When we are doing vendor evaluation, system gives evaluation report at purchase organisation level, but we want vendor evaluation at plant level.
How can I get this, is there any work around available.
Regards
Ishu

Hi
i think your requirement is not possible,define plant specific purchase organization,this will
solve your problem.
Regards,
Varun
Edited by: madhu varun tirupati on Sep 25, 2010 7:31 AM

Similar Messages

  • Plant wise Vendor List

    Dear All,
    I want to find the list of vendor's plant wise. As you all know the vendor is related to Pur.Org. I am able to get the list based on Pur.Org fro Std SAP tables. But my requirement is to get it plant wise & there are 2 or 3 plants assigned to the same Pur.Org which makes it a prob. So please send a solution to crack the same.
    One more thing from std SAP table LFM2 also I tried but my search didnt find any result.
    Thanks in advance!
    Rgds,
    SAP FC

    choose the table LFA1and in field selection choose WERKS (plant) and run it.
    but it may not help u since vendor is created either at company code level or purchase organization level.
    regards,
    indranil

  • Vendor Evaluation in plant level

    Hi there ,
                 Can we do the vendor evaluation in plant level.......because as per my observation we can do the same in Purchasing organization level only......
    Please sugest me
    Thanks & Regards
    Kaushik

    No you can not because vendor are maintained at Pur org level and the evaluation take place at that level but you can view the plant level eveluation
    Run ME63 after ME61 and display the all log
    then Run ME6H with vendor and plant and you will see the list plant wise evaluation

  • Vendor Evaluation by Material and Material Group wise

    Dear Folks,
    Customer requirement is to see subcriterion level scores of Vendor
    Evaluation according to material, Material group wise. But the
    datasource provided by SAP is providing the data according to
    Purchasing Organisation level and Vendor level (0MM_PUR_VE_01).Is it
    Possible to break the scores according to material group and material
    as TC in r/3: ME6B provides ranking based on Main Criterion level
    scores. If possible, what is the logic?
    Thanks in Advance

    Hi Anil,
    Thanks for ur reply.
    But Customer requires vendor evaluation data through Automatic route.
    0MM_PUR_VE_02 caters to semi-automatic data which needs to be configured in r/3, and customer doesn't want to do that. Is there any other solution.

  • How to get plant wise Vendor Balance

    Dear All ,
    Kindly tel me How to Get Vendor Balance at Plant level.
    Regards
    Girish

    Hi Girish,
    we can give the customer balance through Plant wise in standard SAP
    But vendor balance not possible in plant wise.
    For that you can do customise userexit
    Regards
    Surya

  • Vendor Evaluation Purchasing Group wise

    Dear Friends,
    My clients Requirement  is to evaluate vendors based on Product group wise.
    I can use dedicated Buyers(purchasing group) for particular product group.
    What is the possibility of evaluating vendors Purch. group wise in SAP.
    Best Regards
    Krishna

    Hi ,
    In Standard SAP , Vendor Evaluation is done at the purchase organisation level.All the data required for vendor evaluation is stored in the system acordingly.
    In case you want to do vendor evaluation at purchase group level , you can acheive by custom developed program only.
    In case , the same vendor is used by more than one purchase group ... There is no system check to control this . But the vendor master is maintained at the purchase organisation level  that is why standard SAP is performing Vendor evaulation at the purchase organisation level..
    Regards
    Mani

  • Plant wise Vendor

    We have one Company code and one Purchasing organization and 9 Plants.Now i want to see Plant / Profit centre wise vendors list.
    Is there any specific T-code for Plant wise /Profit centre wise vendors? How to Process this requirement!

    HI,
    Try MKVZ & s_alr_87012086 tcodes,
    Thanks & Regards,
    Kiran

  • Vendor evaluation report for a definite time period

    Hi Experts,
    Vendor Evaluation Summary Report required for the vendors for a definite time period. Output of the report should show the scores of vendors for criteria like Price, Delivery, Quality, Service and summation of all these scores.
    Please let me know if any standard report is available which can fulfill my requirement.
    Thanks in advance.
    Kishore.

    Hi,
    ME6H report is not fulfilling my requirement since i require the output format in the form like vendor, vendor name, plant, price, delivery, service, quality and the summation of scores given to these criterias.
    Thanks
    Kishore.

  • Vendor Evaluation on Purchasing Group

    Hi SAPER'S
    Could anyone tell me the if we can run vendor evaluation on Purchasing Group or can we get the report on Purchasing Group after vendor evaluation run.
    Full points guranteed.
    Regards.

    Hi
    No it is not possible.
    Purchasing group is not an organisational element.
    If you want to evaluate based on the plant , that can be done using enhancments.
    Thanks & Regards
    Kishore

  • Mass Maintain weighting key for vendor evaluation.?

    Hi experts
    Can anybody give some inputs for below issue
    1.How to maintain weighting key for vendors .
    2.How to maintain weighting key for all vendors in mass .(Mass maintainence)
    3.How to get the report of vendor ranking list duration wise (Month, year..etc).
    Regards
    MM group

    weighting keys is customizing, and this is certainly not by vendor.
    you define one weighting key  and then you run vendor evaluation using this weighting key.

  • Vendor evaluation cube ?

    Hello ,
    I was just going through business content cube for vendor evaluation and i could see mutipple cube with same name in convention .
    Could you please let me know which one is the latest one and how to determine it ?
    Vendor Evaluation  Technical name: 0PUR_C02
    Vendor Evaluation Data   Technical name: 0PUR_C05
    Vendor Evaluation Data (Semi-Automatic)  Technical name: 0PUR_C06
    Subsequent Settlement u2013 Evaluation   Technical Name: 0PUR_C03
    Which one should i active ?
    Regards

    Hi,
    It depends on your reuirement for Vendor analysis, and you need to activate all/some  of them.
    For example ; you can take some of the infoobjects like
    0PUR_C02 - Vendor information, material, purches org, plant and some score fields as key figure
    0PUR_C05- Overall score , score on time basic , delivery basic etc.. and create a generic datasource for the  above required fields and pull the data from R/3 to BW.
    Also pls chk this link;
    Re: Vendor evaluation infosource
    Regards
    CSM Reddy

  • Vendor Evaluation and inspection type 17

    All,
    Iam using EWM QIE as a result of which i have to use inspection type 17. Does Vendor Evaluation work with inspection type 17. I know for a fact that in standard ECC Vendor Evaluation works with the 01 inspection type, but i am not sure of inspection type 17. Any input will be appreciated.
    Thanks

    Dear Ramki,
    Thanks for your input; if I don't use the user exit, then the quality score is being shown there for the material level.
    But still, there are a few problems:
    1. Material wise Quality score, which is being displayed in ME64, is not getting updating in any of the table. Table ELBM is also blank. There is not even a single record.
    2. The quality rating that is being calculated here is as per following:
         The user gives disposition for the incoming material as
              Qty accepted directly: A1
              Qty accepted after segregation: A2
              Qty accepted as major deviation: A3
              Qty accepted as minor deviation: A4
              Qty Rejected.     : A5
    The formula is
    Q.R. = (A11 + A2(-0.5) + A30.5 + A4(0.8) +A5(-1)  - Line Rej. qty(-1)) / 
                   Total No. of Qty Received.
    Final Q.R. = Q.R. - Mix up complaints*10 - Genuine complaints * 5
    Since the formula have subtraction(negative quality score) also, I don't think that this subtraction or negative score would be able to capture in FM for Quality score procedure and the notification qty will not be able to be calculated.
    So, to get the quality rating as per above and getting the same for the material wise also.
    After that i need to get one report for vendor wise material wise report at month period.
    How should I proceed?
    Thanks once again for your valuable input.
    Thanks & Regards,
    SUMIT GUPTA

  • F110 output Plant wise

    Hi Gurus,
    My client has the requirement that while executing the APP via T-Code F110, the system should post payment documents with cheque numbers by Plant wise.There are around 80 Plants maintained in SAP and we are not using business area.
            The client wants to clear the open items based on Plant. The plant field is not featuring in the Free selection tab in the T-Code F110 also. Any help in this regard is welcome and thanks in advance for the same.
    Regards
    Gopal

    Hi Gurus,
    Further  to above mentioned Thread
    I also have similar scenario where clients is having two plants under one legal entity.
    Client wants F110 output for customer and vendor invoices as per plant. For both plant , there  are separate bank accounts and respective invoice must go to plant specific bank account as this is legal requirement of the country.
    Could you please let me know configuration steps to manage this scenario.
    Thanks in advance.
    Points would be assigned.
    Bhadouria

  • Vendor evaluation ME6H..?

    Hi all
    Can anybody explain about the transaction ME6H, in this transaction i m getting 2 times of all evaluation rating scores. why it is showing 2 times..
    Pls explain me about the ME6H..
    And explain me exactly were we will get the ranking list by Period wise (Eg, april 08 to july 08)..
    Thanks
    sap-mm

    Hi,
    I don't think there is any such option for the same....but you can sort the list from For example, if you want the main criterion "Delivery" in the first column, position the cursor on its column description and choose Edit --> Re-sort by main crit. Return to the original column arrangement by choosing Edit --> Original list.
    You can branch to the vendor evaluation. To do so, position the cursor on the desired vendor and choose Environment -->Display evaluation.
    Choose Environment--> Display vendor to display the vendor master record.
    so as per my knowledge there are main crieteria like price, quantity, delievery for calculating scores.......
    Also i have provided link for further information abt the same:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/8d/b97fc5414511d188fc0000e8322f96/frameset.htm
    Hope it helps...
    Wil let you know abt ME6H after i have my system...
    Regards,
    Priyanka.P
    AWARD IF HELPFULL
    Edited by: Priyanka Paltanwale on Jul 26, 2008 7:16 AM

  • Vendor Evaluation BAPI?

    Dear Gurus,
    Are there any BAPIS available for vendor evaluation?
    I had created a few vendor evaluation criteria that requires manual input of the vendor score. However, these scores cannot be further breakdown to a plant level.
    Thus, I am trying to find a bapi that allows me to update vendor evaluation scores for those criteria I defined at the plant level.
    Please advice. Thank you.
    Best Regards,
    Joseph

    Hi W1N,
    If we run ME6H, there is an option to break down the scores to the plant/site level. I was wondering if there are any BAPIs that can achieve the same functionality.
    Based on this report, I think that in the background, SAP still tracks the scores at plant level?
    Best Regards
    Joseph

Maybe you are looking for

  • Why does my imac start up in safe mode

    hi, imac starts up in safe mode. not every time,  only when progress bar appears at startup. I have had the Logic board replaced under warranty but it still started in safe mode. sometimes when it has started the wifi symbol is missing and no wifi, o

  • I forgot my answer of security questions ?

    i charged my account by itunes gift card , but when i tried to buy anythings the ask me the answer of security Q. when i tried to rest the answers i cant do that there is no option to reset it. what should i do ?  and how can i contact an apple suppo

  • How to get back software I lost with Belle update?

    I had the following games installed on my N8 when there was this "Summer Game Gifts" campaign: - Tom Clancy's H.A.W.X. HD+ - Angry Birds Seasons - The Settlers - Angry Birds Rio - Monopoly Classic HD - Worms HD - GT Racing HD+ - Tetris HD - Guitar Ro

  • Filling DOCFLOW segment in CRMXIF_ORDER_SAVE_M02

    Hi    We are using the IDoc CRMXIF_ORDER_SAVE_M02 to upload data using LSMW> Here we face a problem with the preceding and succeeding documents. What values should we fill in for the DOCFLOW segment to get an object assigned? I understood that OBJECT

  • HT1923 An update to i tunes on my Windows 7 computer caused i tunes to no longer open.

    I have searched the web for solutions, including this site.  I have followed all the uninstalling and reinstalling 3 different times, each time rebooting between uninstalling and reinstalling.  Still will not open.  Started out as MSVCR80.dll issue.