Vendor information not updated in the PO
Hello,
I have a case where a PReq was created with a blocked vendor GE Canada then when the buyer converted the Preq into the PO before saving the PO they she changed the vendor to GE Canada (Not blocked) but when she save the PO it still kept the old vendor's address which is in Toronto instead of updating the address with the unblocked one which is in Calgary.
What causes this?
Thanks
Ibou
Hi Ibou,
If it's only for that one PO, why not update the Vendor address in the purchase order itself? I assume that all other purchase requisitions created after the change copies the udpated address already.
I also tested the scenario in our system and it behaves similarly to your sandbox system.
Cheers.
Similar Messages
-
Vendor is not updating in batch while doing STO
Hi All,
I created a PO with vendor 123456.Did a GR for it.
In GR i maintained a batch AA1 and received the material. Now the stock is in A plant with batch AA1 and vendor 123456.
Then i went in to batch AA1 and found that vendor(123456) was updated in batch master.
Next i created a STO for moving the stock from one plant to another. Stock transfer A plant to B plant.
In STO also i used the same batch AA1 and in outbounddelivery i used same batch AA1 and in GR i maintained the same batch AA1 but plant B.
Now i checked the batch AA1 for plant B.
Here the vendor is not updated in the batch AA1 for plant B combination.
What may be the reason.
If STO is done system cant able to pick the vendor?
KIndly help me in this regard.
Regards
KKHI,
Thanks for the reply.
Yes you are exactly correct.
Is there anyother way that vendor can be updated in the batch?
Regards
KK
Edited by: Kishore Kumar Galla on Nov 10, 2009 2:17 AM -
My Update for OS 10.8.4 is not updating. The update app keeps saying to update the same information and it never updates. Help
Exactly the same for me. Have tried to update three times and my iMac has restarted (after apparently downloading the update) but the update has not been installed.
My iMac is still at 10.8.3. -
Folio number not updated in the table RG23D
Hi all,
Folio number not updated in the table RG23D when I create depot excise invoice using batch program J_1IJCHK. Can any one help me by providing rootcause and solution.
Thanks in advance.
Regards
BalajiSee can i know in which version u r working,Because if u r in 4.6c there will be some problem.Some patches will be there.
Try this program i have send and assign excise duty
REPORT YJ_1IJCHK MESSAGE-ID 8I.
TABLES : J_1IEXCHDR, "excise header
J_1IEXCDTL, "excise detail
J_1IRG23D , "RG23D register
J_1IWRKCUS, "Plant level customisation
J_1IREGSET, "register set customisation
J_1IEXCDEF, "Tax default information
VBFA, "sales document flow
LIKP, "delivery header
LIPS, "delivery detail
T005, "country information
KUAGV, "sold-to-party information
KUWEV, "ship-to-party information
KNA1, "customer master
VBPA, "sales document partner
TVKO, "sales organisation to company co
VBUK, "delivery information
MAKT, "material description
T001. "company code
selection-screen begin of block delivery_details no intervals.
PARAMETERS: FCODE TYPE C,
DELIVERY LIKE LIPS-VBELN,
EXCGROUP LIKE J_1IEXCHDR-EXGRP,
SERGROUP LIKE J_1IEXCHDR-SRGRP.
TYPES : BEGIN OF RG23D.
INCLUDE STRUCTURE J_1IRG23D.
TYPES: MENGR LIKE J_1IEXCDTL-MENGR, "remaining quantity
MENGA LIKE J_1IEXCDTL-MENGA, "quantity actually rec
ADDBED LIKE J_1IEXCDTL-ADDBED,
ADDSED LIKE J_1IEXCDTL-ADDSED,
ADDAED LIKE J_1IEXCDTL-ADDAED,
END OF RG23D.
DATA : BEGIN OF J1IJ300,
BUKRS LIKE TVKO-BUKRS,
WERKS LIKE LIPS-WERKS,
REGID LIKE J_1IREGSET-J_1IREGID,
WAERS LIKE T001-WAERS,
SHIPFROM_IND TYPE C, " Added 10/12/1998
RG23D_SERIALNO TYPE C, " Added 10/12/1998
END OF J1IJ300.
DATA : TRNTYP(4) TYPE C,
CONDT-NAME(3) TYPE C,
TOTAL_LRG23D LIKE LIPS-LFIMG,
ALLOC_LRG23D LIKE LIPS-LFIMG,
SHIPFROM_IND LIKE J_1IEXCHDR-STATUS,
RG23D_SERIALNO LIKE J_1IEXCHDR-STATUS.
DATA : BEGIN OF XLIPS OCCURS 10,
internal table to store the delivery item information
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
MATNR LIKE LIPS-MATNR,
MAKTX LIKE MAKT-MAKTX,
WERKS LIKE LIPS-WERKS,
LGORT LIKE LIPS-LGORT,
CHARG LIKE LIPS-CHARG,
LFIMG LIKE LIPS-LFIMG,
MEINS LIKE LIPS-MEINS,
BED LIKE J_1IRG23D-EXBED,
SED LIKE J_1IRG23D-EXSED,
AED LIKE J_1IRG23D-EXAED,
CUR LIKE J_1IRG23D-EXCUR,
SELFLAG TYPE C , "T=excise invoice selected
INDEX LIKE SY-TABIX, "index in the table
FLG TYPE C. "item selection
DATA : END OF XLIPS.
DATA : CRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains all rg23d entries for the document
DATA : LRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains item rg23d entries
DATA : BEGIN OF Z_1IRG23D OCCURS 30.
stores the data to be updated
INCLUDE STRUCTURE J_1IRG23D.
DATA : END OF Z_1IRG23D.
DATA : BEGIN OF EXCINV OCCURS 30.
factory inovoics selected for item
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF EXCINV.
DATA : BEGIN OF ASSIGNED_EXCINV OCCURS 30.
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF ASSIGNED_EXCINV.
DATA : A_INDEX LIKE SYST-TABIX.
DATA : BEGIN OF LOCK_TABLE OCCURS 10,
table containing plant-material combination and status of the lock
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
STATUS TYPE C, "LOCKED/UNLOCKED
END OF LOCK_TABLE.
DATA : BEGIN OF LOCKTAB OCCURS 0,
TRNTYP LIKE J_1IEXCDTL-TRNTYP,
DOCNO LIKE J_1IEXCDTL-DOCNO,
DOCYR LIKE J_1IEXCDTL-DOCYR,
ZEILE LIKE J_1IEXCDTL-ZEILE,
END OF LOCKTAB.
DATA :
CRG23D-CTR TYPE I, "Line count of crg23d table
SHIPFROM LIKE J_1IRG23D-SHIPFROM,
FOLIO LIKE J_1IRG23D-FOLIO,
SERIALNO LIKE J_1IRG23D-SERIALNO,
DEPEXNUM LIKE J_1IRG23D-DEPEXNUM,
DEPEXYEAR LIKE J_1IRG23D-DEPEXYEAR.
CONSTANTS :
BED LIKE CONDT-NAME VALUE 'BED',
AED LIKE CONDT-NAME VALUE 'AED',
SED LIKE CONDT-NAME VALUE 'SED',
CES LIKE CONDT-NAME VALUE 'CES',
LOCKED TYPE C VALUE '1',
UNLOCKED TYPE C VALUE '2'.
AT SELECTION-SCREEN.
PERFORM CHECK_VBELN_INPUT.
IF FCODE = 'S'.
PERFORM DELIVERY_START_USER_EXIT.
PERFORM READ_DELIVERY_HEADER.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM RG23D_SELECTION.
PERFORM SAVE_DOCUMENT.
MESSAGE I000 WITH 'Selection Complete for Delivery ' DELIVERY.
ELSEIF FCODE = 'V'.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM UPDATE_DOCUMENT.
MESSAGE I000 WITH 'Verfiy/Post Complete for Delivery ' DELIVERY.
ENDIF.
FORM CHECK_VBELN_INPUT.
Validate Function Code
IF NOT ( FCODE = 'S' OR FCODE = 'V' ).
MESSAGE E000 WITH 'Valid Functions are S/V - Select/Verify Post'.
ENDIF.
IF DELIVERY IS INITIAL.
MESSAGE E000 WITH 'Delivery number cannot be initial'.
ENDIF.
check if goods issue done for the delivery
SELECT SINGLE WBSTK INTO VBUK-WBSTK
FROM VBUK
WHERE VBELN = DELIVERY.
IF SY-SUBRC = 0.
IF VBUK-WBSTK <> 'C' AND FCODE = 'V'.
MESSAGE W339 WITH DELIVERY.
ENDIF.
ELSE.
MESSAGE E000 WITH 'Invalid Delivery'.
ENDIF.
if in select mode check if excise invoice already selected for delive
SELECT SINGLE * FROM J_1IRG23D
WHERE VBELN = DELIVERY.
IF FCODE = 'S'.
IF SY-SUBRC = 0.
MESSAGE E325 WITH DELIVERY.
ENDIF.
ELSEIF FCODE = 'V'.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Selection not over for ' DELIVERY.
ELSEIF J_1IRG23D-STATUS = 'P'.
MESSAGE E000 WITH 'Record Already Posted '.
ENDIF.
ENDIF.
CLEAR J_1IRG23D.
ENDFORM. " CHECK_VBELN_INPUT
FORM READ_DELIVERY_HEADER.
SELECT SINGLE * FROM LIKP
WHERE VBELN = DELIVERY.
get the sold-to-party
CLEAR: KUAGV, KUWEV.
SELECT SINGLE KUNNR NAME1 LAND1
FROM KNA1 INTO (KUAGV-KUNNR,KUAGV-NAME1,KUAGV-LAND1)
WHERE KUNNR = LIKP-KUNAG.
get the ship-to-party
SELECT SINGLE KUNNR LAND1 NAME1
FROM KNA1 INTO (KUWEV-KUNNR,KUWEV-LAND1,KUWEV-NAME1)
WHERE KUNNR = LIKP-KUNNR.
ENDFORM. " READ_DELIVERY_HEADER
FORM GET_COMP_CODE.
get the company code of the document from the sales organisation
CLEAR TVKO-BUKRS.
SELECT SINGLE BUKRS FROM TVKO INTO TVKO-BUKRS
WHERE VKORG = LIKP-VKORG.
J1IJ300-BUKRS = TVKO-BUKRS.
SELECT SINGLE WAERS FROM T001 INTO J1IJ300-WAERS
WHERE BUKRS = J1IJ300-BUKRS.
ENDFORM. " GET_COMP_CODE
FORM READ_CUSTOMISATION.
SELECT SINGLE WERKS INTO J1IJ300-WERKS
FROM LIPS
WHERE VBELN = DELIVERY.
Plant level customisation
SELECT SINGLE * FROM J_1IWRKCUS
WHERE J_1IWERKS = J1IJ300-WERKS .
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' J1IJ300-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IDEPOT IS INITIAL.
plant is defined as factory
MESSAGE E322 WITH J1IJ300-WERKS.
ENDIF.
J1IJ300-REGID = J_1IWRKCUS-J_1IREGID.
TRNTYP = 'DLDO'.
SELECT SINGLE * FROM J_1IREGSET
WHERE J_1IREGID = J1IJ300-REGID.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'Register id' J1IJ300-REGID 'J_1IREGSET'.
ENDIF.
ENDFORM. " READ_CUSTOMISATION
*& Form GET_ITEM_INFO
text *
--> p1 text
<-- p2 text
FORM GET_ITEM_INFO.
REFRESH : CRG23D, LRG23D, EXCINV, XLIPS.
PERFORM READ_DELIVERY_ITEM.
ENDFORM. " GET_ITEM_INFO
*& Form READ_DELIVERY_ITEM
text *
--> p1 text
<-- p2 text
FORM READ_DELIVERY_ITEM.
DATA : CNT LIKE SY-TABIX.
CLEAR CNT.
REFRESH XLIPS.
SELECT * FROM LIPS
WHERE VBELN = DELIVERY.
read the delivery item
perform plant checking only if in create mode
IF LIPS-WERKS <> J1IJ300-WERKS.
plant is different from that of the first item
SELECT SINGLE J_1IREGID INTO J_1IWRKCUS-J_1IREGID
FROM J_1IWRKCUS
WHERE J_1IWERKS = LIPS-WERKS.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' LIPS-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IREGID <> J1IJ300-REGID.
register id of the two plants are different
MESSAGE E338 WITH DELIVERY.
ENDIF.
ENDIF.
CLEAR XLIPS.
store the item details
XLIPS-VBELN = LIPS-VBELN.
XLIPS-POSNR = LIPS-POSNR.
XLIPS-MATNR = LIPS-MATNR.
PERFORM GET_MATERIAL_DESC
USING XLIPS-MATNR
XLIPS-MAKTX.
XLIPS-WERKS = LIPS-WERKS.
XLIPS-LGORT = LIPS-LGORT.
XLIPS-CHARG = LIPS-CHARG.
XLIPS-LFIMG = LIPS-LFIMG.
XLIPS-MEINS = LIPS-VRKME. "changed 2.3.98
CLEAR : XLIPS-BED, XLIPS-SED, XLIPS-AED.
XLIPS-CUR = J1IJ300-BUKRS.
CNT = CNT + 1.
XLIPS-INDEX = CNT.
XLIPS-SELFLAG = 'F'.
APPEND XLIPS.
ENDSELECT.
ENDFORM. " READ_DELIVERY_ITEM
*& Form GET_MATERIAL_DESC
text *
--> p1 text
<-- p2 text
FORM GET_MATERIAL_DESC USING MATNR MAKTX.
SELECT SINGLE MAKTX FROM MAKT INTO MAKTX
WHERE MATNR = MATNR
AND SPRAS = 'E' .
ENDFORM. " GET_MATERIAL_DESC
*& Form LOCKING
text *
--> p1 text
<-- p2 text
FORM LOCKING.
REFRESH LOCK_TABLE.
LOOP AT XLIPS.
LOCK_TABLE-WERKS = XLIPS-WERKS.
LOCK_TABLE-MATNR = XLIPS-MATNR.
LOCK_TABLE-STATUS = UNLOCKED.
COLLECT LOCK_TABLE.
ENDLOOP.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING LOCKED.
SELECT TRNTYP DOCNO DOCYR ZEILE INTO
(LOCKTAB-TRNTYP,
LOCKTAB-DOCNO,LOCKTAB-DOCYR,
LOCKTAB-ZEILE)
FROM J_1IEXCDTL
WHERE TRNTYP = 'GRPO'
AND WERKS = XLIPS-WERKS
AND LGORT = XLIPS-LGORT
AND MATNR = XLIPS-MATNR
AND CHARG = XLIPS-CHARG.
APPEND LOCKTAB.
ENDSELECT.
*share lock for all excise invoices
LOOP AT LOCKTAB.
CALL FUNCTION 'ENQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
ENDLOOP.
ENDFORM. " LOCKING
*& Form LOCK_UNLOCK_PLANT_MATERIAL
text *
--> p1 text
<-- p2 text
FORM LOCK_UNLOCK_PLANT_MATERIAL USING ACTION.
DATA: __UNAME LIKE SY-UNAME,
__OBJECT LIKE DD25V-VIEWNAME.
DATA : BEGIN OF LOCK_STRUCT,
GRANNAME(10) VALUE 'J1IJ',
ENQMODE VALUE 'E',
MANDT LIKE SY-MANDT,
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
END OF LOCK_STRUCT.
LOCK_STRUCT-MANDT = SY-MANDT.
LOOP AT LOCK_TABLE WHERE STATUS <> ACTION.
perform the locking/unlocking operation only for the items for which
it is not already done
LOCK_STRUCT-WERKS = LOCK_TABLE-WERKS.
LOCK_STRUCT-MATNR = LOCK_TABLE-MATNR.
CALL 'C_ENQUEUE'
ID 'OPCODE' FIELD ACTION
ID 'ENQOBJ' FIELD 'J_1IJ'
ID '01' FIELD LOCK_STRUCT
ID 'COLLISION_UNAME' FIELD __UNAME
ID 'COLLISION_OBJECT' FIELD __OBJECT.
CASE SY-SUBRC.
WHEN 0.
LOCK_TABLE-STATUS = ACTION.
MODIFY LOCK_TABLE.
WHEN 2.
MESSAGE E341 WITH LOCK_TABLE-WERKS LOCK_TABLE-MATNR __UNAME.
WHEN OTHERS.
IF ACTION = LOCKED.
MESSAGE E342 WITH 'locking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ELSE.
MESSAGE E342 WITH 'unlocking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ENDIF.
ENDCASE.
ENDLOOP.
ENDFORM. " LOCK_UNLOCK_PLANT_MATERIAL
*& Form RG23D_SELECTION
text *
--> p1 text
<-- p2 text
FORM RG23D_SELECTION.
REFRESH CRG23D.
REFRESH ASSIGNED_EXCINV.
LOOP AT XLIPS.
*write: / xlips-vbeln,xlips-posnr,xlips-matnr, xlips-meins, xlips-lfimg.
REFRESH EXCINV.
CALL FUNCTION 'J_1I6_SELECT_EXCISE_INVOICE_DE'
EXPORTING
BUKRS = J1IJ300-BUKRS
CHARG = XLIPS-CHARG
WERKS = XLIPS-WERKS
EXGRP = EXCGROUP
MATNR = XLIPS-MATNR
QTY_CHECK = 'X'
MULTI = 'X'
NO_DAY_CHECK = 'X'
SHIPFROM = SHIPFROM
LGORT = XLIPS-LGORT
TABLES
EXC_TAB = EXCINV
EXCEPTIONS
OTHERS = 1.
TOTAL_LRG23D = 0.
ALLOC_LRG23D = 0.
SORT EXCINV BY DOCYR DOCNO .
LOOP AT ASSIGNED_EXCINV.
READ TABLE EXCINV WITH KEY DOCYR = ASSIGNED_EXCINV-DOCYR
DOCNO = ASSIGNED_EXCINV-DOCNO
ZEILE = ASSIGNED_EXCINV-ZEILE
BINARY SEARCH.
IF SY-SUBRC = 0.
A_INDEX = SY-TABIX.
EXCINV-MENGR = EXCINV-MENGR - ASSIGNED_EXCINV-MENGR.
MODIFY EXCINV INDEX A_INDEX .
ENDIF.
ENDLOOP.
DELETE EXCINV WHERE MENGR = 0.
total_lrg23d = total balance quantity in the selected excise invoices
alloc_lrg23d = Quantity allocated to a delivery line item,
Allocation continues till
- We have balance quantity in excise invoice selection
- Till total delivery quantity is allocated
LOOP AT EXCINV.
To Force the same shipfrom for all the excise invoices
Shipfrom Ind can be determined in the start user-exit
IF J1IJ300-SHIPFROM_IND = 'Y'.
IF XLIPS-INDEX = 1 AND SY-TABIX = 1.
SHIPFROM = EXCINV-SHIPFROM.
ENDIF.
IF SHIPFROM NE EXCINV-SHIPFROM.
EXCINV-RIND3 = 'X'.
MODIFY EXCINV.
CONTINUE.
ENDIF.
ENDIF.
Allocation
IF XLIPS-LFIMG NE ALLOC_LRG23D.
TOTAL_LRG23D = TOTAL_LRG23D + EXCINV-MENGR.
IF XLIPS-LFIMG > TOTAL_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ELSE.
EXCINV-MENGR = XLIPS-LFIMG - ALLOC_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ENDIF.
ELSE.
EXCINV-RIND3 = 'X'.
ENDIF.
MODIFY EXCINV.
ENDLOOP.
DELETE EXCINV WHERE RIND3 = 'X'.
LOOP AT EXCINV.
MOVE-CORRESPONDING EXCINV TO ASSIGNED_EXCINV.
APPEND ASSIGNED_EXCINV.
CLEAR ASSIGNED_EXCINV.
ENDLOOP.
IF TOTAL_LRG23D < XLIPS-LFIMG.
MESSAGE E000 WITH 'Not enough balance in RG23D ......'.
ENDIF.
Collect all allocated excise invoices to crg23d table
LOOP AT EXCINV.
PERFORM FILL_CRG23D.
APPEND CRG23D.
ENDLOOP.
ENDLOOP.
ENDFORM. " RG23D_SELECTION
*& Form SAVE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM SAVE_DOCUMENT.
PERFORM PREPARE_RG23D_DATA.
Generate RG23D serial number and Excise Invoice Serial Number
IF J1IJ300-RG23D_SERIALNO = 'Y'.
PERFORM GENERATE_RG23D_SERIAL ON COMMIT.
ENDIF.
PERFORM GENERATE_EXCISE_INV_SERIAL ON COMMIT.
CALL FUNCTION 'J_1I7_USEREXIT_DEPOT_BEF_SAVE'
TABLES
RG23D = Z_1IRG23D
EXCEPTIONS
OTHERS = 1.
PERFORM UPDATE_RG23D ON COMMIT.
PERFORM UPDATE_EXCDTL ON COMMIT.
COMMIT WORK.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING UNLOCKED.
PERFORM UNLOCKING.
MESSAGE S333 WITH DELIVERY.
ENDFORM. " SAVE_DOCUMENT
*& Form PREPARE_RG23D_DATA
text *
--> p1 text
<-- p2 text
FORM PREPARE_RG23D_DATA.
REFRESH Z_1IRG23D.
LOOP AT CRG23D WHERE MENGE <> 0.
CLEAR Z_1IRG23D.
Z_1IRG23D = CRG23D.
Z_1IRG23D-USNAM = SY-UNAME.
Z_1IRG23D-CPUDT = SY-DATUM.
Z_1IRG23D-EXGRP = EXCGROUP.
Z_1IRG23D-SRGRP = SERGROUP.
APPEND Z_1IRG23D.
IF CRG23D-ADDAED <> 0 OR CRG23D-ADDSED <> 0 OR CRG23D-ADDAED <> 0 .
additional excise is applicable
make quantity zero for A certificate entries
CLEAR : Z_1IRG23D-MENGE.
get all the A certificates for the excise document item
SELECT * FROM J_1IEXCDTL
TODO : add the transaction type to the selection procedure
WHERE RDOC1 = CRG23D-DOCNO
AND RYEAR1 = CRG23D-DOCYR
AND RITEM1 = CRG23D-ZEILE
AND RIND1 = 'G'.
get the A certificate number
SELECT SINGLE
EXNUM EXYEAR INTO (Z_1IRG23D-EXNUM, Z_1IRG23D-EXYEAR)
FROM J_1IEXCHDR
WHERE TRNTYP = J_1IEXCDTL-TRNTYP
AND DOCYR = J_1IEXCDTL-DOCYR
AND DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-TRNTYP = J_1IEXCDTL-TRNTYP.
Z_1IRG23D-DOCYR = J_1IEXCDTL-DOCYR.
Z_1IRG23D-DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-ZEILE = J_1IEXCDTL-ZEILE.
Z_1IRG23D-EXBED = ( J_1IEXCDTL-EXBED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXSED = ( J_1IEXCDTL-EXSED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXAED = ( J_1IEXCDTL-EXAED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-RG23ASER = J_1IEXCDTL-RG23ASER.
Z_1IRG23D-RG23CSER = J_1IEXCDTL-RG23CSER.
Z_1IRG23D-RGPLASER = J_1IEXCDTL-RGPLASER.
APPEND Z_1IRG23D.
ENDSELECT.
ENDIF.
ENDLOOP.
ENDFORM. " PREPARE_RG23D_DATA
*& Form UPDATE_RG23D
text *
--> p1 text
<-- p2 text
FORM UPDATE_RG23D.
*update the rg23d register
INSERT J_1IRG23D FROM TABLE Z_1IRG23D ACCEPTING DUPLICATE KEYS.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDFORM. " UPDATE_RG23D
*& Form UPDATE_EXCDTL
text *
--> p1 text
<-- p2 text
FORM UPDATE_EXCDTL.
LOOP AT CRG23D WHERE MENGE <> 0.
update the remaining quantity in the excise invoice item tables
UPDATE J_1IEXCDTL
SET MENGR = MENGR - CRG23D-MENGE
AENAM = SY-UNAME
AEDAT = SY-DATUM
WHERE TRNTYP = 'GRPO'
AND DOCYR = CRG23D-DOCYR
AND DOCNO = CRG23D-DOCNO
AND ZEILE = CRG23D-ZEILE.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDLOOP.
ENDFORM. " UPDATE_EXCDTL
*& Form FILL_CRG23D
text *
--> p1 text
<-- p2 text
FORM FILL_CRG23D.
CRG23D-TRNTYP = EXCINV-TRNTYP.
CRG23D-DOCYR = EXCINV-DOCYR.
CRG23D-DOCNO = EXCINV-DOCNO.
CRG23D-ZEILE = EXCINV-ZEILE.
CRG23D-VBELN = XLIPS-VBELN.
CRG23D-POSNR = XLIPS-POSNR.
CRG23D-EXNUM = EXCINV-EXNUM.
CRG23D-EXYEAR = EXCINV-EXYEAR.
CRG23D-LIFNR = EXCINV-LIFNR.
CRG23D-MATNR = EXCINV-MATNR.
CRG23D-MAKTX = EXCINV-MAKTX.
CRG23D-CHAPID = EXCINV-CHAPID.
CRG23D-MEINS = EXCINV-MENGR_UOM.
CRG23D-WERKS = EXCINV-WERKS.
CRG23D-EXCUR = EXCINV-EXCUR.
CRG23D-RG23ASER = EXCINV-RG23ASER.
CRG23D-RG23CSER = EXCINV-RG23CSER.
CRG23D-RGPLASER = EXCINV-RGPLASER.
CRG23D-MENGR = EXCINV-MENGR.
CRG23D-MENGA = EXCINV-MENGA.
CRG23D-MENGE = EXCINV-MENGR. " Move the allocated Qty
CRG23D-EXBED = ( EXCINV-EXBED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXSED = ( EXCINV-EXSED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXAED = ( EXCINV-EXAED * CRG23D-MENGE ) / EXCINV-MENGA.
ENDFORM. " FILL_CRG23D
*& Form UPDATE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM UPDATE_DOCUMENT.
LOOP AT XLIPS.
UPDATE J_1IRG23D SET STATUS = 'P'
WHERE VBELN = XLIPS-VBELN
AND POSNR = XLIPS-POSNR.
ENDLOOP.
COMMIT WORK.
ENDFORM. " UPDATE_DOCUMENT
*& Form DELIVERY_START_USER_EXIT
text *
--> p1 text
<-- p2 text
FORM DELIVERY_START_USER_EXIT.
CALL FUNCTION 'J_1I7_USEREXIT_EXGRP_DETERM'
EXPORTING
EXCGRP = EXCGROUP
MBLNR =
MJAHR =
VENDOR =
VBELN = DELIVERY
IMPORTING
EXCGRP = EXCGROUP
SHIPFROM_IND = J1IJ300-SHIPFROM_IND
RG23D_SERIALNO = J1IJ300-RG23D_SERIALNO
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'J_1I7_USEREXIT_SERGRP_DETERM'
EXPORTING
SRGRP = SERGROUP
MBLNR =
MJAHR =
VBELN = DELIVERY
IMPORTING
SRGRP = SERGROUP
EXCEPTIONS
OTHERS = 1.
ENDFORM. " DELIVERY_START_USER_EXIT
*& Form GENERATE_RG23D_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_RG23D_SERIAL.
LOOP AT Z_1IRG23D WHERE MENGE <> 0.
CLEAR: FOLIO, SERIALNO.
SELECT MAX( FOLIO ) MAX( SERIALNO )
INTO (Z_1IRG23D-FOLIO, Z_1IRG23D-SERIALNO)
FROM J_1IRG23D
WHERE TRNTYP = Z_1IRG23D-TRNTYP
AND DOCNO = Z_1IRG23D-DOCNO
AND DOCYR = Z_1IRG23D-DOCYR
AND ZEILE = Z_1IRG23D-ZEILE.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_RG23D_SERIAL
*& Form GENERATE_EXCISE_INV_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_EXCISE_INV_SERIAL.
CLEAR: DEPEXNUM, DEPEXYEAR.
CALL FUNCTION 'J_1I6_DETERMINE_EXC_YEAR'
EXPORTING
I_BUKRS = J1IJ300-BUKRS
IMPORTING
EXCISE_YEAR = DEPEXYEAR
EXCEPTIONS
MISS_COMPANY = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE E526 WITH 'Company ' J1IJ300-BUKRS.
ENDIF.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'J_1IDEPINV'
QUANTITY = '1'
SUBOBJECT = SERGROUP
TOYEAR = DEPEXYEAR
IMPORTING
NUMBER = DEPEXNUM
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
OTHERS = 7.
CASE SY-SUBRC.
WHEN 0.
WHEN 1.
MESSAGE A336 WITH 'internal document' ': Interval not found'
'. Number object : J_1IDEPINV'.
WHEN 3.
MESSAGE A336 WITH 'internal document' ': Object not found'
'. Number object : J_1IDEPINV'.
WHEN OTHERS.
MESSAGE A336 WITH 'internal document'
'. Number object : J_1IDEPINV'.
ENDCASE.
Update Depot Excise Invoice Year and Number in the table
LOOP AT Z_1IRG23D.
Z_1IRG23D-SERIALNO = Z_1IRG23D-SERIALNO + 1.
Z_1IRG23D-DEPEXYEAR = DEPEXYEAR.
Z_1IRG23D-DEPEXNUM = DEPEXNUM.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_EXCISE_INV_SERIAL
*& Form UNLOCKING
text
--> p1 text
<-- p2 text
FORM UNLOCKING.
LOOP AT LOCKTAB.
CALL FUNCTION 'DEQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE.
ENDLOOP.
ENDFORM. " UNLOCKING -
I Need Interactive Report for displaying vendor information. Based on the s
Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.
hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b> -
Vendor field not updated in CRM pricing condition table
Hi,
We have maintained condition table with Material and Vendor fields in ECC and table is active
After replicating this table from ECC to CRM, vendor field not updated in table and it is inactive.
There is any mapping settings required to update vendor field in CRM table from ECC.
Please help me out to solve this issue
Regards
kishore kumarhi, the data field of vendor is a standard one or custimizing one?
I remeber there is a data mapping setting in CRM, for condition field. If you want to mapping a ERP standard field to a CRM custmizing one, you need to setting your rule in it. Maybe you can find it in SM30 view.
I can't login a CRM system now, so sorry for not offer your the view name. -
Hi,
I have created an append on the tables RBKP_V and RBKP.
I am parking a vendor invoice in transaction MIR7.
I'm using the BADI BADI_FDCB_SUBBAS04 to enhance MIR7 transaction. I have followed the BADI documentation.
When I click on 'Save as completed' button :
The customer fields are not updated in the table RBKP.
Whats the solution ?
Best Regards,
Ramesh.SHi, In my opinion, some of Custom fields should move to corresponding field in user exit to update to table.
Example . you have add a field that zzabb into vbak , you should add code like move struct-zzabb to xvbak-zzabb.
**"struct" is from screen field you be inputed -
User and Group information not updated in Sharepoint 2010
Hi,
Recently, our orgnisation has maked update of user and group in the Active Diractory. The information was not update in the site collection. I was try to :
-recreate and synchronize a new service application ( no effect)
- Delete old database synchronisation( stsadm -o sync -deleteolddatabases 5)
- stsadm -o sync -synctiming m:5 and stsadm -o sync -sweeptiming m:5 (No effect)
-I have no error or warning whn i make the synchronisation, all data bases is started.
Anyone can help me please??
ThksIs User Profile to SharePoint Full Synchronization job up and running? Do you see any errors when this job runs? Turn on verbose logging to see details when this job runs.
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom. -
Message server information not updated for SIDs in SMSY
How do I get the message server information updated for systems in SMSY?
I moved a system from one server to another but the information is not updating for the Java stack. The informatoin was updated successfully for the ABAP, but not the Java side. I've reviewed the SLD information and everything there is correct.
In change mode the information is greyed out, so it's updated automatically somewhere.
Thanks for any help.
RyanHi Ryan,
What's your solution manager version?
Have you taken a look into this note?
-> 1301106 SMSY: Enhancements and errors in Enhancement Package 1
Within this note you will find another list of related notes that may fix your issue.
Please take a look as there are many notes reporting similar issues, like:
1298517 SMSY: Server of SCS instance not known in SMSY
1273095 SMSY: Incorrect database server (Java)
Regards,
Daniel. -
Shared Services Security information not updating in Essbase
Hi,
I have created few users in Shared Services and performed the sync operation. Created users are not reflecting in Essbase server. why?
Also tried by externalizing the users... performed sync from shared services and refreshed the shared security from EAS console...then also... user information not updating in Essbase?
What could be the reason?Have you provided Essbase application access rights to those users in shared services?
If not, then try after providing Essbase access to users. This might be the reason for your issue.
Regards,
NitinGupta -
Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
I am a podcaster; the podcasts I publish are not updating in the Podcast app.
I am a podcaster, and my listeners complain that my podcasts are not updating in the Podcast app.
The podcasts are updating without incident on RSS, in the iTunes store, and on other services, such as Stitcher. I have tested my RSS feed and it seems to be OK.
But the last 5 podcasts in the Podcast App are all the same sound file, even though the text surrounding the sound file updates with each new weekly episode.
Any ideas how to fix this?Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Using Game Center
http://support.apple.com/kb/ht4314
If the issue persists, or certain features of a game aren't working as expected (leaderboards, achievements, and so on), use the App Store to report the problem to the developer
Best of luck,
Mario -
Print Module templates layouts do not update on the fly
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem. -
Data is not updated in the database
hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
TextField ccod,cname,add,phno,conp,email,fax;
Label l1,l2,l3,l4,l5,l6,l7;
Button save,exit;
Connection con;
ResultSet rs;
Statement stmt;
String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
super("CustomerDetails");
setSize(700,750);
setLayout(null);
setBackground(new java.awt.Color(245, 117, 105));
l1=new Label("Customercode");
l2=new Label("CompanyName");
l3=new Label("Address");
l4=new Label("PhoneNumber");
l5=new Label("Contact person");
l6=new Label("EmailAddress");
l7=new Label("FaxNumber");
l1.setBounds(20,100,100,70);
l2.setBounds(20,180,100,70);
l3.setBounds(20,270,100,70);
l4.setBounds(20,340,100,70);
l5.setBounds(20,420,100,70);
l6.setBounds(20,500,100,70);
l7.setBounds(20,580,100,70);
ccod=new TextField();
cname=new TextField();
add=new TextField();
phno=new TextField();
conp=new TextField();
email=new TextField();
fax=new TextField();
ccod.setBounds(200,120,150,50);
cname.setBounds(200,200,150,50);
add.setBounds(200,280,150,50);
phno.setBounds(200,360,150,50);
conp.setBounds(200,440,150,50);
email.setBounds(200,520,150,50);
fax.setBounds(200,600,150,50);
Button save= new Button("Save");
Button exit= new Button("Exit");
save.setBounds(200,680,100,40);
exit.setBounds(350,680,100,40);
add(l1);
add(ccod);
add(l2);
add(cname);
add(l3);
add(add);
add(l4);
add(phno);
add(l5);
add(conp);
add(l6);
add(email);
add(l7);
add(fax);
add(save);
add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:prism");
stmt=con.createStatement();
rs=stmt.executeQuery(query);
stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
Customerdetails cud= new Customerdetails();
}This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M -
I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?
Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling
Maybe you are looking for
-
Hello, I would need clear direction to what I should do to upgrade my target weblogic server when I move my development environment from jdeveloper 11.1.1.1.0 to 11.1.1.4.0 Initial ADF project was developed with jdeveloper 11.1.1.1.0 and deployed on
-
i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great! When I reboot fro
-
Adobe Reader version 11.2.0
Since the download of the v.11.2.0 on my iPad, when I try to move a file to a folder, Adobe closes by itself. Do you have a solution ?
-
Wow, for the Mac Users in the house... check it out.
http://www.lithoglyph.com/mondrianum You gotta check this out.
-
How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon? I tried "Software Update" and says "no update available". I contacted Epson and was told all driver updates had to be obtained using "Software Update"?