Vendor Invoice verification payment terms

Hi Experts,
PO is having one item with Gross price,freight .
Freight vendor is different from main vendor.
Main vendor-PAYMENT TERMS-1% discount- 5 days
Freight vendor--PAYMENT TERMS- pay immidiatly
After making GRN and when i tried to post invoice in MIRO
for freight vendor,system is not calculating as per payment terms of freight vendor and showing 1%discount as in main vendor payment terms
Let me know how system can calculate freight value with out discount .
I tried simuating invoice with PO reference,Vendor reference also in MIRO.
Thanks ,
Rama

Hi
Payment terms are defined in the PO at header level and hence the system takes the payment terms of the regular vendor for the freight vendor also.
Check whether payment terms can be given at item level.
If not possible then change the payment terms for the freight vendor manually while doing MIRO .
while doing MIRO select PO reference and also planned delivery costs selection.
Revert with ur comments..
Reg
Raja

Similar Messages

With holding tax base amount for 1099 vendors with discounted payment term

Hi Friends,
We have a below situation for 1099 vendors,
Some of the 1099 vendors are set-up in the system with payment term with discounts i.e. 2% if paid within 10 days
As per config, system posts with holding tax base amount at the time of posting payment.
With holding tax rate is 0%,
Based on modified net amount calculation
and
Cash discount calculation before w/tax calculation
When we have vendor with input tax, system excludes tax amount at the time of payment but for the with holding tax base calculation amount system does not exclude input tax type.
Which causes difference in 1099 misc vendors
Below is the example of how system calculates the amount.
Invoice $ 1000, payment term 2% if paid within 10 days. Input tax 7.25%
Payment going out=
$1000- $ 72.5(tax 7.25%) = $ 927.5 18.55 [2% discount] = $ 908.95 (payment amount)
With holding base calculation =
$ 1000 100 (2% discount) = $ 900
Difference between payment going out and with holding tax base = 908.98 900 = 8.98
Can some one please tell me how to get rid off this difference?
Moreover, please tell me if its normal to have 1099 vendors with discounted payment term.
Any thoughts on above situation will be helpful
Edited by: Shefford William on Jan 28, 2008 11:36 PM

Dear All
i am also having the same problem. The example is
Net invoice Value   = $ 100,000
Input Tax @ 15%   = $ 15,000
Total Invoice Value = $ 115,000
Cash Discount = 20% with in 20 days
On payment the system behavior should be
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,325 ( 3.5% of 95,000 the Inv Value - Cash Discount that is $ 115,000 - $20,000)
Credit Bank Account = $ 91,675 ( Inv value - Cash Dic - W/H tax that is $ 115,000 - 20,000 - 3325 = 91,675)
However at the time of payment system is calculating tax as follows
Debit Vendor invoice Value   = $ 115,000
Debit Cash Discount @ 20%    = $   20,000   ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,220 ( 3.5% of 92,000 the Inv Value - Cash Discount that is $ 115,000 - $23,000. This $ 23,000 is only calculated for W/H tax calculation that is 20% of $ 115,000 )
Credit Bank Account = $ 91,780 ( Inv value - Cash Dis - W/H tax that is $ 115,000 - 20,000 - 3220 = 91,780)
this is not the common practice when using the net base value in the system.
Can any one help me in this regard. I really have been stucked in this problem for many days
Regards
Bilal Athar

Vendor changes tracking, Payment term filtering, Vendor listing

Hi All,
Need somebody help on the following points,
1- While changing the vendor via "process vendor and Bidder" (Business partner maintenance) transaction in EBP, the selection of payment term is restricted. That is in SPRO I can see lot of payment terms, but while changing the vendor some few payment terms are coming. Where is the filter? Can anybody guide me.
2- Vendor changes Tracking. In our project somebody has changed frequently the vendor indicators and details in EBP via process Vendor and Bidder(BP maintenance) transaction. But I couldnt able to track which fields are changed and by whom like in R/3. I tried in BP also, but only the address changed details are coming there. Can anybody guide me how to track the changes, if somebody changed somefield in EBP directly?
3- Vendor list - I want list ERS activated vendor in EBP. How to get the list of vendor for which ERS indicator is active? Please guide me.
Many thanks in Advance.
Regards
Shunmugaraj. T

Hi
Please refer to standard transaction - BBP_PD.. give any Shopping cart number, which is approved by a list of buyers, managers, etc..
Incase the changes are made, it will display all the details related to them in that case.
Understand its logic by putting break-point inside.
Incase you are using SRM 5.5 version, there is a report, which displays the changes made to the Purchase orders with old and new values.
Report name -> TERM_DISPLAY_CHANGE_HISTORY
Also please refer this as well.
Say you use this Function module for the change object - BUPA_BBP0060
This sample code will all the changes, if any, made to the object, with the old value and new values.
Here is the sample code for the FM ->
CHANGEDOCUMENTS_TO_OBJECT 
data: listtitle(80) type c.
data: objectclass like cdhdr-objectclas.
data: objecttitle(20) type c.
data: con_keylength(2) type n value 10.
data: cursor_field(20) type c.
listtitle = 'Changes made'.
listtitle+22 = vibebe-sberi.
listtitle+34 = vibebe-xberibz.
condense listtitle.
objectclass = 'BUPA_BBP0060'.
call function 'CHANGEDOCUMENTS_TO_OBJECT'
 exporting
 callmodus = callmodus
 cursor_field = cursor_field
 keylength = con_keylength
 listtitle = listtitle
 objectclass = objectclass
 objectid = objectid
 objecttitle = objecttitle
 exceptions
 error_in_function = 01
 invalid_field = 02
 others = 03.
if sy-subrc <> 0.
 message id sy-msgid type 'S' number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Invoice and payment terms ...I don't understand . please suggest me

I have given problem below. In FI, we normally configure in fbzp tocode...what is the outpur type here ? for the below which program I need to check ? Invoice and payment terms ...given
Pls take a look at this invoice and let me know why it is changing the payment term.
User has below problem :
SAP FI Output type SAP19
Payment Terms print "Payment Due Immediately" rather than actual terms.
i.e. invoice 208615 - payment terms US02 - should print "Net 60" however prints "Payment Due Immediately".
Is this hard coded and if so, can it be corrected and when?
Please advise.
Thanks,

Using fb12, I am selecting customer invoice
then in new popup I am giving invoice number and fiscal year. then it is giving message on status bar as 'customer invoice requested'.
Then i am going to F.61 and executing by giving in pop up -->correpspondence, company code, document number and fiscal year.
Then a spool is getting created and I am able to see the form output in /nsp01 where the error is occuring .
Could you please suggest me hwo to find out the form name and driver program name.
THANKS IN ADVANCE.
Edited by: Sam Kumar on Sep 3, 2008 7:30 PM

Invoice document payment term inconsistency

I use MIR4 to display invoice, the payment terms is 122 days net, my base line date is 10.23
but i go to accounting document, it shows payment terms is five days due after baseline date
why payment terms are different, how 122 days calulated?

Hi,
According to Robert's advise, go to XK02 and go to Company code data and remove payment term code there.
And also make sure that payment term code is maintained in the Purchasing organisation level.
then only system will take the payment term from PO.
And one more thing is that...
For each payment term key, you can set a default date for determinating baseline date. You can set either Doc date or posting date or Entry date or NO DEFAULT.
And also check that your payment should have the number of required days maintained in it.
There is nothing to do with the description of payment term...Please check the Pt config in OBB8
Thanks,
Srinu

Can a vendor have multiple Payment terms?

Hi
The user has maintained payment terms in MM (MK02) & FI (FK02) and maintained same payment term for Company code. However in BW report for "Purchase statistic per Supplier" does not match with R/3 and some vendor shows multi payment term.
What might be the reason for it?
Your valuable advise and suggestions are appreciated
TIA
Ishi

Hi
Any ideas?

One vendor shows multiple payment terms

Hi
The user has maintained payment terms in in MM (MK02) & FI (FK02) and maintained same payment term for Company code. However in BW report for "Purchase statistic per Supplier" does not match with R/3 and some vendor shows multi payment term.
What might be the reason for it/
Your valuable advise and suggestions are appreciated
TIA
P.B

Hi
Any ideas?

AR Invoice with payment term with multiple payments

Hi -
I need some help on this.
We create invoices with payment terms that will have more than one payment schedules.
For example, customer can pay $100 in 3 terms such as 33 (immediately), 33 (after 1 month), 34 (after 2 months).
Now, this is all well. My question is, when we take the order, customer gives Credit Card number, we put that on the order and effectively it goes to the transaction screen.
Let's say at the time of second payment (After 1 month), customer credit card is expired, our CC validation will fail (CC validation program) and we will not be able to get the payment.
Now let's say I have new CC # for that customer (received from CC company), how do I update that on the transaction? I know I can do this from the front end but how do I update that using an API?
Also, why receivables (11.5.10) does not have option to have payment method at payment schedule level instead of invoice level?
I mean customer may have different method of paying for the subsequent installments.

I found out the missing GL account that is under Admin> Setup> Financials> GL acct Determination
Now, I need GL account in tab Sales - "Payment Advances". I think this is should be the Liability account instead AR account if I have to choose an account but what will be the offset account? Why I need GL account for AR Down Payment Invoice since no transaction really will be generated? Just to calculate how much will be expected from customer on the first installment and balance due.
When I receive the incoming payment will Dr. Checking or Saving and Cr. AR.

Vendor Invoice - Outgoing Payment -How to apply cash discount automatically

Hi Folks,
My Vendor is 400000 - whose payment terms is : 0002
I posted a vendor invoice using FB60 :
where i checked the payment terms is 0002 3% Cash Discount within 14 days
2% Cash discount within 30 days
Net within 45 dats
Default for Baseline date : Posting Date.
My Document Date and Posting date are both same: Invoice Document and posting date : 07/31/2008
I tried to make a payment using F-53, where the Cash Discount is not applying automatically. It is asking me to manually enter the cah discount @ 3%.
What should i do to make cash discount apply automatically.
Thanks and Help will be surely rewarded.
Matthew

Hello I just checked in my system it is automatically picking even if I am not taking the discount....check the payment terms....
ex : I have invoice for 500 with payment terms 1% discount
When I pay 500 in F-53 the system is showing me the net amount 495.
When I pay 495 the system is also showing me the net amount of 495
You might want to have a look at the payment terms.......
Make sure when you enter the amount in F-53 and press "Process Open Items", you have the discount percent populated automatically in the CashD% field.
Thanks
Harish
Edited by: Harish R on Aug 1, 2008 3:19 PM

Tables for vendor invoice and payment

Hi Gurus.
I want to know from which tables i can get the information for folllowing points.
1. Vendor Invoices - Complete (Header and Item)
2. Vendor Payments Details Detail about payment method (check, wire, etc)
Please tell me tje table names.

There is no specific table for header/item data for vendor invoice. Various information regarding vendor invoice (FB60) are stored in the following tables( note: Ignore the structures in the list ).
|Table Name |Table Description |
|/BEV3/CHKOMPAZVV |Append Structure CH -> CO PA |
|/CWM/ACCIT |Append Structure for Enhancement of Structure ACCIT in CWM |
|/CWM/KOMP |Catch Weight Management Enhancement |
|/DSD/TAXJURCD |Ship From Tax Jurisdiction Code: for Header Prc Comm Str |
|/SAPNEA/J_SC_LFA1 |Subcontractor Information |
|/SAPNEA/J_SC_LFB1 |Subcontracting Management |
|/SAPPSPRO/A_FI2_LONGNUM |IBU-PS: Append structure for structure NONBSEG |
|/SAPPSPRO/A_LONGNUMBER |additional fields for SPIIN number |
|/SAPPSPRO/EADD |Purchasing Document Header: Additional Data |
|/SAPPSPRO/EADD_DATA |Purchasing Document Header: Data Part Additional Information|
|/VSO/R_KNA1_A |Append to KNA1 for Vehicle Space Optimization |
|/VSO/R_KNA1_I |Additional Data for Vehicle Space Optimization for KNA1 |
|AACCHD_FMFG |US federal fields |
|AACCHD_PSO |IS-PS: ACCHD Append Structure for Payment Requests |
|AACCIT_GM |Append for Grants Management |
|AACCIT_PSO |IS-PS: ACCIT Append Structure for Payment Requests |
|AACCIT_SSP |Append for Payment Statistical Sampling Process |
|AACCIT_USFG |Append structure for US federal government |
|AAUSZ_CLR_USFG |Clearing information for US Fed (Tresury Confirmation) |
|ABKPF_PSO |IS-PS: BKPF Append Structure for Payment Requests |
|ABKPF_UMB |IS-PS: Append Structure for Transfer Transaction FMITPO |
|ABSID_PSO |IS-PS: Data appendix of open items customers |
|ABSIK_PSO |IS-PS: Data appendix of open items vendors |
|ABSIS_PSO |Local Authorities |
|ABUZ |Help Structure for Line Items to be Generated Automatically |
|ACCCR |Accounting Interface: Currency Information |
|ACCCR_FKEY |Key: Acctg Currency Data for Line Item Including Currency |
|ACCCR_KEY |Key: Accounting Currency Data for Line Item |
|ACCFI |Interface to Accounting: Financial Acctg One-Time Accts |
|ACCHD |Interface to Accounting: Header Information |
|ACCHD_KEY |Key: FI/CO Document Header |
|ACCIT |Accounting Interface: Item Information |
|ACCIT_EXTENSION |ACC Document: Additional Item Information |
|ACCIT_JV |Joint Venture Accounting |
|ACCIT_KEY |Key: FI/CO Line Item |
|ACCIT_WT |Withholding tax information for FI Interface |
|ACCRDF |Fields for Posting Small Differences: Preparation |
|ACC_DOCUMENT |Accounting document |
|ACC_KONTEXT |Context Info for FI Single Screen Transactions FB50 and FB60|
|ACERRLOG |Return Parameter |
|ACGL_HEAD |Fields for Document Header Entry Screen |
|ACGL_ITEM |Structure for Table Control: G/L Account Entry |
|ACSCR |Communication Structure for Field Modification SAPLFDCB |
|ACSPLT |Carrier for Split Information re: Current Account Line Items|
|ACSPLT_WTNEW |Proportion of New Withholding Tax |
|ACSPLT_WTOLD |Proportion of Old Withholding Tax |
|ADDR1_SEL |Address selection parameter |
|AEBPP_KNBK |Additional Fields Bank Data Biller Direct |
|AEBPP_LFBK |Additional Fields Bank Data Biller Direct |
|AFMIOI |Append for new fields ECC50/ERP |
|AFMIOI_USFG | SD order needs quantity |
|AFMISPS |Additional Fields for Table FMISPS |
|AFM_ACCIT_EXTENSION |Extension for FM Payment Update |
|AFM_FAGL_GLT0_ACCIT_EXT |Extension FM Account Assignments |
|AFM_FI_BKPF_SUBST |Append to Structure BKPF_SUBST |
|AFM_FMFCTF |Append for Fund Center substrings |
|AFM_FMFINCODE |Append for Fund substrings |
|AIFM01D |Append for IFM01D |
|AKNA1_FMFG |US Federal Government Customer Master Data Additional Fields|
|AKNA1_PSO |Local Authority Additional Fields |
|AKNB1_PSO |IS-PS: Customer Master Record, Additional Data (Co.Code) |
|AKNBK_PSO |Bank Details Dependent on Time and Account Holder |
|ALFA1_FMFG |US Federal Government Vendor Master Data Additional Fields |
|ALFA1_PSO |Local Authority Additional Fields (Address) |
|ALFB1_FMFG |PS fields for company code-specific master data field |
|ALFB1_PSO |IS-PS: Data Appendix Vendor Master Record (Company Code) |
|ALFBK_PSO |Bank Details Dependent on Time and Account Holder |
|ALVDYNP |ALV dialog screen fields |
|ALV_S_FCAT |Field Catalog (for LVC and for KKBLO) |
|ALV_S_FILT |Filter Criteria (for LVC and for KKBLO) |
|ALV_S_GRPL |Group Levels (for LVC and for KKBLO) |
|ALV_S_LAYO |Layout (for LVC and for KKBLO) |
|ALV_S_PCTL |Structure for Checking Print in ALV |
|ALV_S_PRNT |Print settings (for LVC and KKBLO) |
|ALV_S_QINF |Structure for Quickinfos of Exceptions |
|ALV_S_SGRP |Field Groups (for LVC and for KKBLO) |
|ALV_S_SORT |Sort Criteria (for LVC and for KKBLO) |
|ANBZ |Help structure for asset line item |
|ANLZACCOUNT |Additional Account Assignment Objects in Asset Accounting |
|ANLZACCOUNT_FKBER |Account Assignment Objects: ANLZACCOUNT with Function Added |
|ARC_PARAMS |ImageLink structure |
|AT003_XBLNR2 |Append structure for US federal government |
|AUSZ1 |Clearing Table 1 |
|AUSZ2 |Clearing Table 2 |
|AUSZ_CLR |Assign Clearing Item to Cleared Items |
|AUSZ_CLR_ASGMT |Assgt of Clrg Items - Cleared Items with Acct Assignment |
|AUSZ_INFO |Open item data for clearing transactions |
|AVBKPF_FMFG |US federal |
|AVBKPF_PSO |IS-PS: Append Structure VBKPF for Payment Requests |
|AVBSEGDPSO |IS-PS: Append Structure VBSEGD for Payment Requests |
|AVBSEGKPSO |IS-PS: Append Structure VBSEGK for Payment Requests |
|AVIK |Payment Advice Header |
|AVIP |Payment Advice Line Item |
|BALHDR |Application log: log header |
|BALMT |Application Log: Structure for a formatted message |
|BAL_S_CLBK |Application Log: Return routine definition |
|BAL_S_CONT |Application Log: Context |
|BAL_S_MSG |Application Log: Message Data |
|BAL_S_PAR |Application Log: Parameter Name and Value |
|BAL_S_PARM |Application log: Parameters |
|BAPIASCONT |Business Document Service: File Content ASCII |
|BAPIBDS01 |Business Document Service: Reference Structure for BAPIs |
|BAPICOMFIL |BDS: Command File for Transport Entries |
|BAPICOMPO2 |SBDS: Enhanced Component Information |
|BAPICOMPO3 |SBDS: Enhanced Component Information |
|BAPICOMPON |Business Document Service: Component Table |
|BAPICONNEC |BDS: Structure for BDS Links |
|BAPICONTEN |Business Document Service: File Content |
|BAPIDPROPT |BDS: Structure for Properties |
|BAPIFILES |Business Document Services: Transfer Table for File Names |
|BAPIPROPER |BDS: Structure for Properties |
|BAPIPROPTL |BDS: Structure for KPRO Properties |
|BAPIQUERY |BDS Structure for Query Table |
|BAPIRELAT |Business Document Service: Relations |
|BAPIRET1 |Return Parameter |
|BAPIRETURN |Return Parameter |
|BAPISIGNAT |Business Document Service: Signature Table |
|BAPISRELAT |Business Document Service: Relationship Table with Signature|
|BAPIURI |Business Document Service: URI Table |
|BDCMSGCOLL |Collecting messages in the SAP System |
|BDCRUN |Batch input: Runtime analysis |
|BDIDOCSTAT |ALE IDoc status (subset of all IDoc status fields) |
|BDI_SER |Serialization objects for one/several IDocs |
|BDN_FKT |Business Document Navigator: Functions to be Excluded |
|BDWFAP_PAR |Parameters for application function module - IDoc inbound |
|BDWFRETVAR |Assignment of IDoc or document no. to method parameter |
|BDWF_PARAM |Parameters for workflow methods for IDoc inbound processing |
|BKDF |Document Header Supplement for Recurring Entry |
|BKDF_SUBST |Process Interfaces: Substitutable fields during posting |
|BKORM |Accounting Correspondence Requests |
|BKP1 |Document Header Supplement for Update |
|BKPF |Accounting Document Header |
|BKPFBU_ALV |Document Overview: Display Document Headers in ALV Grid Ctrl|
|BKPF_CARD |Credit Card: Append for BKPF |
|BKPF_LINE |Item Category for XBKPF_TAB |
|BKPF_SUBST |Process Interfaces: Substitutable Fields During Posting |
|BKPF_USFED |Append structure for US federal government |
|BLNTAB |Document Number Table for Financial Accounting |
|BNKA |Bank master record |
|BNKAAPP |Appendix to Table BNKA |
|BNKT |Conversion of temporary to internal bank keys |
|BOOLE |Boolean variable |
|BSEC |One-Time Account Data Document Segment |
|BSEC_LINE |Item Category for XBSEC_TAB |
|BSED |Bill of Exchange Fields Document Segment |
|BSEE |Changeable Fields in the Line Item |
|BSEG |Accounting Document Segment |
|BSEGL |Document Segment: Fields Derived for Line Layout Variant |
|BSEGS |G/L Item Transfer Structure for Single Screen Transactions |
|BSEGT |Transfer Table for the Tax Postings to be Generated |
|BSEGZ |Financial Acctg Doc.Segment: Extras and Temp. Storage Fields|
|BSEG_ALV |Document Overview: Document Item Display in ALV Grid Control|
|BSEG_LINE |Item Category for XBSEG_TAB |
|BSEG_SUBST |Process Interfaces: Substitutable Fields During Posting |
|BSET |Tax Data Document Segment |
|BSEU |Line Item Additional Information (Update) |
|BSEZ |Line Item Additional Information (Online) |
|BSEZ_LINE |Line Item Category for XBSEZ_TAB |
|BSID |Accounting: Secondary Index for Customers |
|BSIK |Accounting: Secondary Index for Vendors |
|BSIP |Index for Vendor Validation of Double Documents |
|BSIS |Accounting: Secondary Index for G/L Accounts |
|BSIX |Index table for customer bills of exchange used |
|BTXKDF |Fields for Exch.Rate Difference Posting for Taxes |
|BVOR |Intercompany posting procedures |
|CACS_A_CRM_SALES_COND |Additional CRM Fields (Construction) From Sales Order Area |
|CACS_A_CUST_COND |Commissions: Customer Fields Condition Technique |
|CACS_A_FIELDSPRICING |Append for Condition Technique Fields from Commission System|
|CACS_S_CRM_SALES_COND |Additional CRM Fields (Construction) From Sales Order Area |
|CACS_S_CUST_COND |Condition Attributes |
|CACS_S_FIELDSPRICING |Comm.: All Condition Technique-Relevant Commission Fields |
|CACS_S_FSINS |Customer Fields for Condition Technique of Insurances |
|CCDATA |Payment cards: Database fields relevant to both SD and FI |
|CFW_LINK |CFW: Link Info of a Container |
|CI_COBL |Extension |
|CKI_ACCIT_ML |Transfer from MM to ML in accit-structure |
|CNTLSTRLIS |Control stream list |
|COBK |CO Object: Document Header |
|COBK_ONLY |Non-key fields only in COBK (INCLUDE structure) |
|COBL |Coding Block |
|COBLF |Coding block: Tax table structure |
|COBL_COKZ |Assignment types for CO account assignments |
|COBL_DB_INCLUDE |Include with Additional Account Assignments for DB Tables |
|COBL_EX |Coding Block for External Applications (Not CO/FI) |
|COBL_FI |Fields from COBL that Must not Be Overwritten in FI |
|COBL_FM |Additional Fields for FM |
|D010SINF |Generated Table for View D010SINF |
|D020S |System table D020S (screen sources) |
|D020T |Screen Short Description |
|DBSEG |Dialog Supplementation BSEG (Taxes) |
|DD02L |SAP Tables |
|DD03P |Structure |
|DD03V |Table fields view |
|DD07V |Generated Table for View DD07V |
|DD23L |Matchcode ID |
|DD32P |Interface structure for search help parameters |
|DDSHDEFLT |Description of a default value for search help fields |
|DDSHDESCR |Interface: elementary search helps of a search help |
|DDSHFPROP |Characteristics of search help parameters |
|DDSHIFACE |Interface description of a F4 help method |
|DDSHRETVAL |Interface Structure Search Help <-> Help System |
|DDSHSELOPT |Selection options for value selection with search help |
|DDSUX030L |Nametab Header, Database Structure DDNTT |
|DDSUX031L |Nametab Structure, Database Structure DDNTF |
|DDTYPES |Table of all Dictionary types and classes |
|DFIES |DD Interface: Table Fields for DDIF_FIELDINFO_GET |
|DISVARIANT |Layout (External Use) |
|DOKHL |Documentation: Headers |
|DPPROPS |General property structure for data provider |
|DTC_S_LAYO |Structure for Design of Double Table Control |
|DTC_S_TC |Structure for table controls in the double table dialog box |
|DTC_S_TS |Tab Title Structure |
|DYNPREAD |Fields of the current screen (with values) |
|E071 |Change & Transport System: Object Entries of Requests/Tasks |
|E071K |Change & Transport System: Key Entries of Requests/Tasks |
|EAPS_20 |Field Enhancements for EA-PS 2.0 |
|EDIDC |Control record (IDoc) |
|EDIDS |Status Record (IDoc) |
|EDIFCT |IDoc: Assignment of FM to log. message and IDoc type |
|EDIMESSAGE |Transfer Structure with all Sy Fields for T100 |
|EDI_DS |Status record for interface to EDI subsystem |
|EDI_HELP |Help Structure for Reference Fields in EDI Function Groups |
|EK05A |Communication Area Purchasing - Financial Accounting |
|ESKN |Account Assignment in Service Package |
|EUDB |Development Environment Objects |
|EUOBJ |Workbench: Development Objects |
|EXCLTAB_LINE |Lines of EXCLTAB with OK Code to be Deactivated |
|EXISTING_DOC |Original Document |
|F05ACTRL |Control Fields for SAPMF05A and Subprograms |
|FAGLBSEGL_S |Additional Sender Flds from General Ledger for Doc. Overview|
|FAGL_GLT0_ACCIT_EXT |Line Information for Document Splitting |
|FAGL_MIG_S_BUKRS_LEDGER |Combination of Company Code and Assigned Ledgers |
|FAGL_SPLIT_FLD_S |Characteristics Permitted for Split |
|FAGL_S_APPLICATION |Application and Subapplication |
|FAGL_S_BALDIM |G/L Characteristics of Document Split in New General Ledger |
|FAGL_S_BUKRS |Structure with Company Code |
|FAGL_S_BUKRS_EXT |Structure: Company Codes --> Ledgers |
|FAGL_S_CURTYPES |Currency Types of a Ledger |
|FAGL_S_MIG_001 |Structure for Table FAGL_MIG_001 & FAGL_MIG_001_S |
|FAGL_S_MIG_MGPLN_EXT |Structure: Extended Migration Plan Information |
|FAGL_S_T8G40_BS |Split Fields with Characteristic "Balance Sheet" |
|FCRD_VBKPF |Credit Card: Include for Appends for BKPF, VBKPF |
|FCRD_VBSEG |Include for Appends for VBSE* |
|FDM_AR_CASE_ATTR_1 |FSCM DM: |
|FDM_AR_LINE_ITEM |FSCM: DM |
|FDM_AR_RFPOS |FSCM-DM: Enhancemt of Line Item Disp. with Dispute Case Flds|
|FELD |Screen Painter fields (internal) |
|FICCO |Adjustment Values for External Document Items |
|FICCT |Totals Information for Interclient Posting |
|FICTX |Tax Information for ICT |
|FIELDINFO |Field attributes for a specific field |
|FIN1_PARAM |OBNG: Trans. structure for official doc. numbering (global) |
|FIN1_PARAM_FI |OBNG: FI parameters |
|FIN1_PARAM_MM |OBNG: MM Parameters |
|FIPEX_STRUC |Subfields Commitment Item |
|FIPOEXT |Help structure for line items to be generated automatically |
|FIREVDOC |Transfer Structure for Dialog Module FI_DOCUMENT_REVERS |
|FISTL_STRUC |Substructure Fund Center |
|FM01 |Financial Management Areas |
|FMBLSTRING_COMPONENTS |Component of the BL String |
|FMCI |Commitment items master data |
|FMDY |FIFM: Screen Fields |
|FMFCTR |Funds Center Master Record |
|FMFG_ACCIT_EXTENSION |Extention for all fields that have to be transfered into BL |
|FMFINCODE |FIFM: Financing code |
|FMFPO |FIFM: Commitment Item |
|FMHRBA_NEG_DOC_TYPES |HR Integration: Doc. Types for Negative Funds Commitments |
|FMHRBA_SETTINGS |Integration with HR: Settings |
|FMHRBA_VAD_SETTINGS |HR Integration: Generate Value Adjustment Docs for Changes |
|FMICCN |FM: Append Structure for FMIOI (CCN Fields) |
|FMIDATA |Common Data for Funds Management Actual Data |
|FMIDATAFI |Clean FI Data for Funds Management Actual Data |
|FMIDATAOI |Clean Open Item Data for Funds Management Actual Data |
|FMIFIIT |FI Line Item Table in Funds Management |
|FMIKEY |Common Key for Funds Management Actual Data |
|FMIKEYFI |FI - Key for Funds Management Actual Data |
|FMIKEYOI |Common Key for Funds Management Actual Data |
|FMIOI |Commitment Documents Funds Management |
|FMIOIKEY |Key for Table FMIOI |
|FMIOI_USFG | SD order needs quantity |
|FMIREF |Ref. Funds Management Actual Data to Preceding Document |
|FMISPS |General Parameters for Funds Management |
|FMIT |Totals Table for Funds Management |
|FMMRESERV |Include for the Reduction of Funds Reservations (FM) |
|FMRFC |Function Modules and their RFC Destinations |
|FMSP_SPLIT_FIELDS |PSM Fields used in multiple account splitting |
|FMT001 |Additional Customizing for Funds Management |
|FMUP00T |Update Profiles |
|FMUP01 |Update Control with Value Type Dependency |
|FMUP_INV_KEY |Extension for FM Update: FI Key of Invoice |
|FMUP_PAY_KEY |Extension for FM Update: FI Key of Payment |
|FS006 |Fields for Optical Archiving |
|FTCHECK |Foreign Trade: Import Simulation - Ctrl Fields for Pricing |
|FTEXTS |Communication Structure for Additional Components |
|FTGENERAL |Foreign Trade: General Fields Item |
|FUND_STRUC |Substructure Fonds |
|FVD_TZB0A |Append to TZBOA: Loans Fields |
|GLACCOUNT_CCODE |G/L Account Master Record: Company Code |
|GLACCOUNT_CCODE_DATA |G/L Account Master Record: Company Code - Data |
|GLACCOUNT_CCODE_INFO |G/L Account Master Record: Company Code - Information |
|GLACCOUNT_CCODE_KEY |G/L Account Master Record: Company Code - Key |
|GLX_ORG_INFO |Organizational Assignment |
|GMBSEGZ |Grants Management Add-on |
|GXXLT_H |XXL interface: horizontal features |
|GXXLT_O |XXL_interface: texts for online display |
|GXXLT_S |XXL interface: structure of the semantics table |
|GXXLT_V |XXL interface: vertical features |
|HELPVAL |Restrict Value Range - Transfer Table |
|HELP_INFO |Transfer Values for the Help Processor |
|HELP_VALUE |Structure or Function Module HELP_VALUE_GET_FOR_TABLE |
|HHM_COBL |Include for COBL from FM |
|IADDR_PSO |Local Authority Additional Fields (Address) |
|IBKPF_PSO |IS-PS: Include Structure BKPF Payment Request Doc.Header |
|ICDIND |Structures for generating change document update programs |
|ICON |Icons table |
|ICONS |Icons |
|ICURR |Interface for Currency Translation

Vendor invoices in payment proposal

Hi All,
In F110, system is not showing vendor invoices but it is only showing vendor credit memo in the exception list,
Why it is not showing vendor invoices in the payment proposal list?
Thanks in advance

Hi
Check the vednor in FBL1N, whether that vendor is in Open Item or not. Check the payment method in Vendor master and any payment blocks. And also check the due date for payment. In F110, check due date with next p/date.
See the error message in exceptional list and do accordingly.
Regards
Madan

Mass change of Vendor Line Items Payment Terms

Hi all
We are trying to make a mass change of payment terms for vendor line items. We have implemented the change required as per SAP note 640908. However when we try to do this not all payment terms are changed.
The log gives us the following error - 'Field BSEG-ZTERM. does not exist in the screen SAPMF05L 1302'.
Please how can we solve this error.
Many thanks
PRG

Hi,
According to note 640908:
" Notes on error handling:
    If the mass change does not occur as required even though you
    changed and activated all program parts, note that the error log
    for the mass change (Environment -> Mass change -> Error log of
    line item list) may contain useful information for error
    handling."
" Note: SAP cannot guarantee that the modified mass change will work
correctly even if you carry out all of the steps as described in the
manual tasks."
It is not planned to enter the payment terms by using of
the field payment term ZTERM but by using of the fields ZBD1T/ZBD1P and
ZBD2T/ZBD2P and ZBD3T.
With Best Regards,
Gladys Xing

Unable to Create PO for a Vendor with Particular payment terms

Hi All,
we have a scenarion in SRM 7.0 system where the PO is ending up in error in SRM for a vendor. In BBP_PD the error message says "Enter payt terms" " enter GR Non Valuated".
Now in my SRM system i can see the PO has got the payment terms and PO is for single account assignment. i have generated the BAPI data for the BAPI_PO_CREATE1 and can confirm the erro is coming form backend and in the bapi the paymnet terms is correctly passed in the header record.
I am not sure why this error from backend.. have anyone encountered similar issue.
anything to check with paymet terms in backed. i have another payment terms working and few of them are not working.
cheers
Iftekhar Alam.

Note 1350184 - Payment terms from PO not transferred to backend
BBP_PDHGP-PMNTTRMS
Check payment term is available
Have you creted this payterm from SRM or pulled from ECC ?
Note 1350185 - Payment terms from PO not transferred to backend
check each data in BBP_PAYTERM in the value and match with ecc payterm table. some times some conditions are misinterupted in SRM
for ex.
Muthu

Payment to Vendor Based on Payment Term

Hi experts,
I want to create some new payment terms in SAP with integration with IV. Say if I have 30 days credit period in PO payment term , system will not allow to pay vendor before 30 days of GR date.
How to customise this. Can any body explain the process step by step? Is it a config issue or customisation issue? If need to write code, where to write it.
Full point will be awarded for useful reply,
Regards,
Santosh

Hi all,
I know how to create Payment terms. But my question is how to link the payment terms with advance. Say payment term is 50 % advance against GR. rest 50 % after 2 months of GR.System should prevent user if he wants to pay before scheduled date. How to Map it in sap. Can it be done through config setting? or it is to be done through customised development. If it is done through customisation which user exit to use.
Regards,
Santosh

Draft invoice and payment terms

A customer has 30 day credit terms (for example), but when creating a DRAFT invoice the docuemnt date, posting date and due date defaults to todays date.
When converting the draft invoice to an INVOICE, the due date remains as today - not the payment terms of 30 days from posting date.
How can the payment terms be activated to ensure correct aging of the invoice?
2005A PL23

The 'due date' appears as soon as the Customer is selected in Invoice not while saving as 'Draft'. The due date is based on the 'Payment Terms' set in the 'BP Master Data'.
I request you to check if the 'Due Date' is set properly before saving the document as draft. It should be as per the payment Terms of the BP. If not check the Payment Terms of the BP.
I have checked this feature with SAP B1 2005B PL: 38 and works properly.

Vendor Invoice verification payment terms

Similar Messages

Maybe you are looking for