Vendor Last transaction
Dear All,
I would like to know is there any Transaction Code or tables from where we can get the last date of transactions in the vendor account.
Regards
Uttam
Dear Sir,
Thanks for the reply.
Basically,
We have 4000 vendor master list in SAP and I want to block those vendors (at Company code level and Purchase organisation level) whose transactions has been stop for which I want a list from system where I will get the details of last transaction in one shot.
On the basis of that we will block the vendors.
From FBL1N or S_ALR_87012103 (T. Codes) I have to go one by one which will take a lot of time to get the same.
Please help.
Regards
Uttam
Similar Messages
-
Hi,
I want to show vendor last transaction date. How we can get it.
Thanks in advance.
Regards,
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Dec 9, 2011 5:42 PMHi,
You can take the report of the FI accounting document for all vendors based on the company code and the posting date ( input the present date) in the T code- S_ALR_87012991.
regards,
Kannan B -
Hi
Could any one tell me how the extract the date of last transaction made by a list of vendors. The purpose is to block the inactive vendors.
regards
HariHi Hari,
Please check the below thread, it might help you.
Vendors Last Transaction date
Regards,
Akhila. -
Vendor with last transaction date
Hi,
Can I generate any report which contains all vendors with last transaction date? THis is for audit purpose.
Thanks & Regards,
Rajaneesh.CHi,
You can take the report of the FI accounting document for all vendors based on the company code and the posting date ( input the present date) in the T code- S_ALR_87012991.
regards,
Kannan B -
How to get the last transaction in a row in SQL Developer?
What syntax would I use to get the last transaction of a row in SQL developer?
The way I have my query set-up currently it is not returning the correct data, here is my current syntax:
select ssn, max(tran_id), chng_type,tran_id
from pda_tran
where ssn = 'xxx-xxx-0011'
and chng_type = 'C'
group by ssn, chng_type,tran_id;
It returns a 'C' chng_type but it is not the last one. when I query on this ssn this is what I get:
ssn tran_id chng_type
xxx-xxx-0011 001 A
xxx-xxx-0011 002 E
xxx-xxx-0011 003 C
xxx-xxx-0011 004 S
xxx-xxx-0011 005 C
xxx-xxx-0011 006 T
I only want to return the ssn's with a last transaction chng_type of 'C'. How can I get the correct information returned. Please advise.From what I see and read... there is one to many group by
You wrote
select ssn, max(tran_id), chng_type,tran_id
from pda_tran
where ssn = 'xxx-xxx-0011'
and chng_type = 'C'
group by ssn, chng_type,tran_id;
If you want the max(tran_id), remove it from the "group by"
select ssn, chng_type, max(tran_id)
FROM
(SELECT 'xxx-xxx-0011' ssn, '001' tran_id, 'A' chng_type FROM DUAL UNION
SELECT 'xxx-xxx-0011' ssn, '002' tran_id, 'E' chng_type FROM DUAL UNION
SELECT 'xxx-xxx-0011' ssn, '003' tran_id, 'C' chng_type FROM DUAL UNION
SELECT 'xxx-xxx-0011' ssn, '004' tran_id, 'S' chng_type FROM DUAL UNION
SELECT 'xxx-xxx-0011' ssn, '005' tran_id, 'C' chng_type FROM DUAL UNION
SELECT 'xxx-xxx-0011' ssn, '006'tran_id, 'T' chng_type FROM DUAL )
where ssn = 'xxx-xxx-0011'
and chng_type = 'C'
group by ssn, chng_type; -
Inventory report with the last transaction details of each material
Hi,
is there any standard inventory report in SAP which gives us the last transaction details of each
Material,along with last procurement qty, value, date and last issue
details of Qty, Value & date.
Thansk in advance.Hi
try following t-code
MB5B u2013 Stock on Posting Date
or
2 s_p00_07000139 u2013 Stock Card and Inventory Material Report
Regards
Kailas Ugale -
How to get the date of the last transaction in a mounted standby database?
Hello,
Could you tell me how to get the date of the last transaction recorded in a MOUNTED standby database?
The following query doesn't work...because the database is not open...
select scn_to_timestamp(current_scn) from v$database;
ThanksHi,
You should be able to run the following command in mounted mode on standby database.
select current_scn from v$database;
then run the following to convert it to timestamp.
select scn_to_timestamp(99999999) from dual; *<-- Replace here the SCN value you got above. This needs to be run on the primary database due to standby database in mount mode.*
Alternatively you can also check at the alert.log file to find the last scn which has been applied.
Regards
Edited by: skvaish1 on Jan 19, 2010 11:15 AM -
Vendor Balances transaction wise.
Hello Every One,
I am novice SAP. So please let me know to check ledger of Vendor along transaction wise balances.Hi,
you can check the following reports for vendor balances with transaction
FBL1N
S_ALR_87012082 - Vendor Balances in Local Currency
S_ALR_87012103 - List of Vendor Line Items -
How to determine the last transaction of a Batch Number
Hello,
For example,
ITEMCODE - BATCHNUM - WHSCODE - LINENUM - DIRECTION
ITEM1 - BATCH1 - WH1 - 0 - 0
ITEM1 - BATCH1 - WH2 - 0 - 0
ITEM1 - BATCH1 - WH1 - 1 - 1
ITEM1 - BATCH1 - WH2 - 1 - 1
How will I know that record number 4 is the last transaction regardless of the transaction type and warehouse code. Is there any table which can help me solve this issue other than OIBT?
Regards,
Gilbert NgoYou could use the OINM Transnum (connected to the IBT1) to determine the last transaction:
SELECT T1.[TransNum],
T0.[ItemCode], T0.[BatchNum], T0.[WhsCode]
FROM [dbo].[IBT1] T0
Join OINM T1 On T1.[BASE_REF] = T0.[BaseEntry] and T0.[BaseType] = T1.[TransType] -
After a recover database, how can I find the time of the last transaction?
After doing a restore and recovery. Is there something in the data dictionary that I can query to find the time of the last applied transaction that took place during the recover process?
restore database ;
recover database ;
For example, if I restored from a full backup on 8/3/2008 with archive redologs, I know my last restored transaction is from sometime on that day, but I'd like a way to know the hour:minute:second of the last transaction included in the backup and redologs that was applied to my restore. Is that possible?
The recover database applies all available redo logs for that day, but I want to know if that includes transaction up to 6PM, or 11:50PM, etc?
Thanks,
JasonIf you did only a "recover database" that would have been a Complete Recovery to the last transaction -- ie the point when the database was shutdown.
For an Incomplete Recovery, you would have to note the Sequence#, SCN or Timestamp of the recovery point. -
Vendor Master transaction code???
Hi all,
can anyone tell me the vendor master transaction code, as I wanted to use it in LSM recording process..
Thanks,
KenKen,
Vendor Master transaction codes are as follows
1. XK01 - Create
2. XK02 - Change
3. XK03 - Display
Thanks
Giridhar -
hi experts,
I want to write a daily report to show a item's history, not only last sales, purchase date, but also last transaction date(includes production, inventory transfer, issues and receipts).
I know OITM and OITW can get Stock, unit price, last purchase date and last sales date, but where can I get the last transaction date and info such as item post list? Thanks...Try this one:
SELECT T0.ItemCode, T0.ItemName, T0.Onhand, Max(T1.DocDate) 'Last Trans Date'
FROM dbo.OITM T0
INNER JOIN dbo.OINM T1 ON T1.ItemCode = T0.ItemCode
WHERE T0.ItemCode Like '[%0\]%'
GROUP BY T0.ItemCode, T0.ItemName, T0.Onhand
Thanks,
Gordon -
Need a report_Batchwise Mvt type last transaction date qty
Dear Gurus
Please suggest me any standard report or Table for display below report.
Batchwise>Mvt type>last transaction date>qty
thanks in advance
MayurHi,
MB51 --- Material documents list.
Regards, -
BAPI for creating Return delivery to vendor using transaction MIGO
Hi All,
My requirement is to create Return delivery to vendor using transaction MIGO.
In MIGO transaction to create return delivery, the following steps needs to be followed.
i) Select the option A02 Return delivery, R02 Material document,
Enter Material document xxxxxxxx.
Reson for movement:xxxx
By selecting the option item ok and via delivery check box, then save.
After saving return delivery needs to be created.
Is there any BAPI/FM exist for this requirement?
I made lot of search in sdn, but i could not find any thing helpful.
Appreciate quick help.
regards
suryaHi
In VL02n->Extras->Delivery Output->Header
Check if you see any message type (LD00 ?).
If you do not see any, insert a message type LD00.
If you want to check the IMG settings, see Txns : V/71 (for delivery types RL/RLL) and V/73 (for Item category RLLN)
Best regards
Ramki -
Storage Location last transaction date
Hi All
What particular transaction code or report will I can find storage location last transaction date?
We'll be using this for our PID
Thank you
JesielleHi Shiva Ram
Aside from tcodes MB51 and MB5B. Is there any other report wherein it only shows the storage location codes with last transaction date?
Thanks
Jesielle
Maybe you are looking for
-
Won't sync purchased items, "linked to another library on computer ****"
I keep getting an error message that says I can't sync videos to my iPod as this iPod is linked to another library (and gives a computer code in a lot of digits and letters). How do I sync the video across without losing the content already on the iP
-
Factsheet for both Business Partner Cockpit & Portal
Hi, There are some factsheets inside business partner cockpit. Can these factsheets be viewable in portal as, for instance, an iView? One of the BP partner cockpit factsheets is CL_CRM_CCKPT_IOS_XML_RFC_STYLE which renders HTML from XML data generate
-
Hi guys. I made a video in the standard widescreen dimensions. I then imported the video into flashand reduced the size to 75%. The new dimensions are now set to 540 x 432. Now this should be still a nice widescreen shape but it looks like 4x3 dimens
-
When I tried to open Firefox 4 a dialogue box opened stating "Can't open the application Firefox because it is not supported on this architecture"
-
New-DPMRecoveryOption CopyToFolder for an Exchange database backup
I'm trying to restore an Exchange database from DPM 2010 into the file system using powershell. I'm able to perform this action in the DPM GUI simply by selecting the "Copy to a Network Folder" option. When I try this in powershell I fail when creati