Vendor list with their mail address
HI experts,
I need a report which gives list of vendors in our plant .
in that it should give Vendor Name,Vendor Number and Email address.
I tried with MKVZ and LFA1..but not able to find.....
Please guide me in this.
Thanks
MK
hi
Also if u do not want to create Query
Extract both tables in excel
with reference to address number ( which is common in both tables ) put simple
v look up formula so that u will get email address in LFA1 excel sheet
( <b>Note that address number is common link betn two tables</b> )
some usefull info i found on <b>SDN</b> about creating query
check if usefull
User T-code: SQVI
Enter your "query name" and press"create"
Enter title
In Data source " select Table join"
select basis mode and press continue.
Press Insert table and give the tabes one by one.
Drag the parameter and drop in another table to establish link and link all the tables.
Press check to check whether your link is correct, then press back
You will be able to see the tables and fields on left hand side.
Select the appropriate parameters for selection fields and list fields
Selection fields- For selection of data, the initial screen of report.
List fields are nothing but output.
Execute the report.
You will find the initial screen of report.
Give your parameters for output and execute again.
You will receive the desired output.
You can down load the output in spread sheet/ in the format desired.
At last save your query before coming out of transaction
Vishal..
Similar Messages
-
Vendor list with complete address with contact nos.
dear
i want to export the vendor list with complete address and contact nos.
i use <b>mkvz</b> for list of all the vendors but i do not get the address and contact no.
pls send the t-code or any setting parameters for the same
regds
deveshhi
Try ADRC table in SE16 but u need a address number to get data which is available in LFA1 table as ADRNR field
now u will be able to fing street address with respect to vendor
If required u can club these reports to develop query take help from abaper
Vishal... -
How to get TDS Vendors list with name
Hellow Friends,
I want to get only TDS vendors list with Respective names.I have used Table LFBW.There i am getting only TDS Vendor codes list not comming with names.
Is there any Table or T.Code or Report to get TDS Vendors list with names?
Please Advice me.
Thanks&Regards
KumarDevelop a query joining table LFA1 & LFBW on primary key as LIFNR. in the out put have the TDS Vendors with name and TDS Code
Assign points if useful
Regards -
How do I list the e-mail addresses in my contacts group? It seems to go only to the first address.
Hi ozziejack123,
Welcome to the Support Communities!
The individual contacts are sorted first within the Contact application. When you create a group in Contacts, the individual names in the group should keep the same sorting order. Try resetting the name order for all contacts.
Contacts (Mavericks): List contacts by first or last name
http://support.apple.com/kb/PH15091
Choose whether contacts’ first or last names are listed first, and whether they’re sorted by first or last name.
Change the name order for all contacts
Choose Contacts > Preferences, then click General.
Select an option next to “Show first name.”
Sort contacts
Choose Contacts > Preferences, then click General.
Use the Sort By menu to choose how to sort.
I hope this information helps ....
- Judy -
Billing Documents with multiple mailing address
Experts,
What are all the standard options to generate SD billing documents with multiple mailing addresses. Billing document contents will be same but they will addressed to different mailing addresses.
Have you come across this situation and implemented? Please let me know you expert advide.
Thanks much,
NagarajanI assume that
multiple mailing addresses
are fixed.
So, to print a hardcopies of invoice with multiple mailing addresses.
You can have Z table in the system with all the mailing addresses, say,
Bill-to Party
Sr No
Address
100023
01
Chennai Address
100023
02
Mumbai Address
100023
03
Noida Address
Then write a logic in your print program to call the Z Table with address while printing the output.
You can take assistance of ABAPer in your team for this.
Regards
JP -
Is it possible to use RBL lists with Apple Mail?
Message was edited by: MacDanielThere are several 3rd-party applications that provide this functionality - google os x mail merge.
AK -
After downloading the new ios7 when someone texts me it comes up with their email address and no number how do i get it just the number and no email address?
The sending person needs to go their settings go to Messages go to send & receive and select your phone #
-
With the update of my iphone5 I lost features in my audiobooks. Before the chapters were listed with their descriptions - that's gone!! How come Apple?
Okay, that is the latest iOS. As far as shortcuts are concerned, they should be available. Go to Settings, General, Keyboard, Shortcuts. You should find the settings and area to enter new ones there. The area to set what numbers to receive calls from in DND mode are in Settings, Notifications, Do Not Disturb, and then then Allow Calls From.
Does this help? -
has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?
Have you tried calling Apple tech support?
http://www.apple.com/contact/ -
Is anyone else having issues with their mail , where the reply from the person you just contacted contains very old emails from a different contact ?
I mean that I sent an email to a contact of mine yesterday. His reply contained a stream of very old emails I had received in 2009 from a totally different contact all together !! The reply email was in my inbox as being from the original person I sent the email to. This is starting to happen more regularly now , so is a problem !
-
Issue with electronic mail address in profile
As a part of the conversion process, one of the electronic mail addresses I use was effectively 'burned in' to my profile. Clearly I can make it visible, or keep it hidden - but there is a problem. The public address I previously had listed for this purpose is not available - instead it's the private address that is displayed!
Think of it like this:
[email protected] [private address]
[email protected] [public address]
It was the public one previously visible - it's now the private one, currently set to hidden, which is the only one I can choose to display or hide. Can anything be done about this, or are we stuck with this 'converted' change to our profiles?I appreciate the thought, and am sure that for some users this would be a sufficient tactic. Unfortunately, I have historically had issues with the interlocking but thoroughly unreliable process of changing ones basic identity at…
http://myinfo.apple.com
This is aggravated by the fact that I have four such identities - though I only use one here in Apple Discussions - with varying levels of access to ADC, GSX and other generally non-public areas at Apple. Managing them, including my .Mac ID, is at times a challenge, and I hesitate to do anything at all to upset the delicate balance. Unless the Discussions profiles revert to a primary private electronic mail address with a secondary optional 'public' address, I suppose I will just have to use the previously non-public address that became the sole available address following the conversion.
Thanks again for thinking about this, and offering a solution to the issue. -
Down List With Multiple Email Addresses
I have created a form with liveCycle Designer which requires users to choose a email address from a drop down list. How I can submit the completed .pdf form to the specified from the list drop down email address.
ThanksHi Paul,
This worked great! I used it in LiveCycle Designer for an electronic time-off request for our field sales. They fill it out then the submitt button in their section sents it to their supervisor for his digital signature. The supervisor's section has another button that sends the form to me and HR. They love it.
I'm a newbie with this and really appreciate the help. Thanks much.
Barb -
Just Not Having Any Luck With E-Mail Address, ect.
Kuduo,
First off thank you so much for just doing this!!! I have been dealing with the company, and it's a nightmare!
I am still getting nowhere as far a establishing a e-mail address for the e- what ever it's called on my printer.
I have a new hp photosmart all in one D 110 A, and I finally did get it to work without using a usb cable, even
if the print out tells me that I should change it as I caould have others use, see my things. I do use my wire-
less computer(laptop) to obtain a connection, and get a very good one from some new neighbor. I do not
want to chage it, and the report at one point even said it was "critical"
I have printed out several time the things it tells you to, but have yet to see any e-mail address???!!! So just
what is the scoope on this anyway?
I do know that it took me forever , and also alone to even figure out how to use my printer without the usb cord,
and for now she is working fine.
The one problem is that it does start to print off the wall, and also I hace change the settings 10 times from
color to black, but it only goes back to prihting COLOR!!!!!
Thanks For Your Help In Advance
DebbieEnable Web Services from the front of the printer.
What operating system are you using and I can give you a hint about the color/black thing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
2 I tunes librarys on our PC with e mail address. Want to move 1 library?
My partner and I both have our I tunes library's on our old shared e mail address. I would like to take my library on to my new e mail address and account set up with it on I tunes.
Can this be done or is it easier just to change the e mail address of the whole account?I am not exactly sure what it is you want. A library is a specific file (library.itl) that points to music on your computer, not at an e-mail address.
You cannot split, merge, or transfer content between AppleIDs. You can change contact e-mail addresses for an AppleID. -
Hi Guys,
I want a list of all users in the database with their specified roles.
Any help will be appreciated.
Regards,I was confused that GRANTEE is USERNAME and I am still confused. No need to be confused because docs are saying :
GRANTEE VARCHAR2(30) Name of the user or role receiving the grant
http://docs.oracle.com/cd/B19306_01/server.102/b14237/statviews_4064.htm
Probably you are not seeing all/some user names, because chances are that some privileges are granted to role but not directly to the users. Users are accessing those privileges via role. See example :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> create user test identified by test;
User created.
SQL> grant connect,resource to test;
Grant succeeded.
SQL> create role testrole;
Role created.
SQL> grant select on scott.emp to testrole;
Grant succeeded.
SQL> connect test/test
Connected.
SQL> SELECT GRANTED_ROLE FROM USER_ROLE_PRIVS;
GRANTED_ROLE
CONNECT
RESOURCE
SQL> connect scott/tiger
Connected.
SQL> grant testrole to test;
Grant succeeded.
SQL> connect test/test
Connected.
SQL> SELECT GRANTED_ROLE FROM USER_ROLE_PRIVS;
GRANTED_ROLE
CONNECT
RESOURCE
TESTROLE
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 5000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 3000 20
7934 MILLER CLERK 7782 23-JAN-82 1300 10
14 rows selected.
SQL>Regards
Girish Sharma
Maybe you are looking for
-
Windows Service Manager 32-Bit Has Stopped Responding/iPod not showing up in iTunes
Hello, I've scoured this forum for answers but I cannot find any result that works. I have an iPod classic that I've connected to my Gateway running Windows Vista for over four years without issue. When I was using iTunes 9 the other day, I plugged m
-
XP pro sp2 not installing - IO Error
what's up mac gurus - I have one for you. I have a macbook pro -1.8ghz 2 gigs ram I just reformatted to a brand new tiger install with all the updates. I downloaded Bootcamp - which has worked fantastically for me I might add in the past. Anyhow in t
-
My wife's iPhone (2G) was updated to 3.0 and then it started missing SMS messeges, either sent, or received. The messeges are missed immediately after their were sent, or were received to the iPhone. Most strange this continiued happening even after
-
Does anyone could help to unlock my 4S?
Got a gift verizon 4s but couldn't use on Taiwan carrier. >>Edited to comply with community TOS<< Message was edited by: Verizon Moderator
-
CO-PC Cost components are not assigned when actual cost was posted
Hi Expert, I estimate material cost by Tcode CK11N, the result is cost components were assigned to plan cost. It's okay. But, I have a problem when posting actual cost. After actual cost was posted by confirming backflush, I run Tcode KKBC_PKO to che