Vendor Master Change Log Details

Hello All,
As I have changed the vendor master data on last May-09. But the changed master data is wrong.
So I'd like to reset the vendor master data to the original value.
Therefore, could you please let me know how to check the vendor master change logs ( i.e with the use of any t-codes or tables ), and how to identify the original values ( i.e before changing ).
Best regards,
Kesav

You can see in Xk02 / Xk03 transaction - Environment tab - Field changes..

Similar Messages

  • Need BOR & event which triggers after vendor master change.

    Hi all.
        Can you pls let me know the BOR & event which triggers after vendor master change. (Xk02). I used tcodes SWELS (evetn trace) , and SWEL and changed vendor adress using XK02. but I could not find any event or BOR in the trace. Pls help me out.
    Cheers,
    sam.

    Hi
    when we change the vendor details we dont have the event which is automatically triggered by the system so we create an zbusinessobject as subtype  for the vendor(LFA1)  as supertype.
    and create a new event in that z business object .
    change document for the vendor is KRED you can check it in the CDHDR table by giving tcode name.
    after finding changedocument object go to SWEC and create a newentry specifying your changedocumentobject name and BO name and event name and click on radiobutton onchange.
    and now you can check whether an entry is getting in swels or not when changing the vendoor details.
    Thanks.

  • Vendor Master change  - Message 00055

    Dear Gurus,
    There is no issue in changing the vendor master, but suddenly in Change - Contact Persons screen (Vendor master change), the system prompts to Fill in all required entry fields (which is mandatory - the system pops suddenly, but its not happened previsouly). Below is the message, when i see in F1
    Please advice how to rectify the problem? Thanks in Advance
    Fill in all required entry fields
    Message no. 00055
    Diagnosis
    You have attempted to update data or start an action. However, not all required information was specified.
    System Response
    The system could not execute the action.
    Procedure
    Enter all required information. Fields in which you must enter data are prefilled with a checkmark or question mark ("?") by the system. If the current screen contains tabs, check all tabs to make sure you have filled in all required fields. Then restart the action.

    RS,
    It is possible that a mandatory field is hidden (suppressed) in the vendor master fields.  That would help explain why this just started happening.  Check "Define Account Groups with Screen Layout (Vendors)" and "Define Screen Layout per Company Code (Vendors)" in the IMG to verify the vendor master screens have not been changed.
    Regards

  • Email upload in vendor master change

    Hi all,
    I have to do emails upload in vendor master change but when i do through shdb recording i am not able to see the communication screen to enter the values. Can any one of you please guide me step by step.
    Thanks & regards,
    Kumar

    Hi,
    you have to use table BAPICOMREM. Just go to one testing customer and add email address with note to this customer. Then go to SE37 and call BAPI BAPI_ADDRESSORG_GETDETAIL. This BAPI has same structure as BAPI_ADDRESSORG_CHANGE. Hence you will see how you have to fill all structures to change email address and also note.
    Cheers

  • How BBPUPDVD determines vendor master change in ECC?

    Hi Experts,
    How is the vendor master change in ECC captured and what is the strategy/check that the BBPUPDVD transaction OR vendor update report uses/does in ECC to pick up the updated vendor with qualified fields for transmission?
    Qualified fields -> Purchasing block, curr change, comm method change, etc.
    For e.g, if a vendor is blocked for a P.Org today and if we either execute BBPUPDVD OR vendor update job, so how does it determine the change in vendor master in ECC?
    Thanks!
    Regards,
    Karthik

    Hello Karthik,
    just to complete what wrote Konstantin, those change documents are determined in ECC using CHANGEDOCUMENT_READ function modul inside BBP_SCAN_VD function modul which is called by RFC from SRM (report BBP_VENDOR_SYNC).
    Regards.
    Laurent.

  • How to replicate R/3 Vendor Master changes to SRM

    Hi Gurus,
    We have scheduled the job "BBP_VENDOR_GET_DATA_JOB " on daily basis, the job is running and updating the new vendor master from R/3 to EBP. But it is not updating the R/3 vendor master changes (E.g. Blocking the Vendor in R/3) are not getting update to R/3.
    Please any one can suggest which job we need to schedule for this one. Also I found to report for this one " BBP_VENDOR_UPDATE_DATA_JOB" and BBP_VENDORS _SYNC", but I am not sure which one needs to setup. Also please suggest me any config needs to be do for this one.
    Your help will greatly appreciated.
    Thanks & regards,
    Sada

    Hi Sada,
    AS per  OSS Note 602651 , for SRM 2.0 and SRM 3.0 [ EBP 3.0 and EBP 3.5] SAP provided the  report  BBP_VENDOR_GET_DATA_JOB and BBP_VENDOR_UPDATE_DATA_JOB which could be scheduled in background for vendor replication and synchronization in SRM. These reports are equivalent to TCODE BBPGETVD and BBPUPDVD.
    Thereafter from SRM 4.0 onwards SAP strategy has been to do one time replication through BBPGETVD and provided different way of synchronizing the replicated vendor. That is based on change object concept, for that it has provided an SPRO Node for Customization.
    SPRO->IMG->SAP Supplier Relationship Management -> SRM server -> Technical Basic setting -> Settings for Supplier Synchronization
    The Customization setting is required before we schedule the synchronization job. The Synchronization job runs the report BBP_VENDOR_SYNC.
    Cheers
    Iftekhar Alam

  • Vendor Master Changes updation

    Hello SAP Guru's
    I am developing a Smartform for Vendor Master Changes.
    My requirement is at top i wanna print the date when the Vendor's Master data was changed. I dont wanna capture the date when the smartform was executied.
    once again i am requesting you that i wanna capture the Vendor Master Changes date on to the Smartform. Please help me.
    Its urgent.
    Also if anyone knows or have any documentation with step-by-step screen shot for Adobe form creation please send to my personal id.
    vamshis@drreddy's.com
    or
    [email protected]
    Points will be rewarded for everyone.
    thanq
    vamshi

    Hi Vamshi,
    You can use the field<b> udate</b> from table CDHDR .I  am referring to this as we can see this feild in report S_ALR_87012089 which gives the date of last change in vendor master if you give the vendor number in the selection screen.So what you can do is that you can pick the values from it..
    Reward points if useful...
    Cheers!!!
    Pankaj Sharma

  • MASS confirm Vendor Master changes

    Hi,
    I want to know whether it is possible to mass confirm the vendor master changes.
    As thru the transaction FK08 only individual vendors can be confirmed at one time.
    Thanks
    Suresh

    Hi,
    Thanks, but still need to select by each vendor if there is a list.
    Rgds

  • Change Log Details for the Planning Profiles in CRM

    Hi All,
    We are getting the Planning data from CRM Planning Profiles into BW BPS - 0CRM_C01 Real Time InfoCube.
    The Users got a new requirement and they need the following additional details:
    1. User who modified the amount in a particular Planning Profile.
    2. Date and Time when the Planning Amount has been modified.
    3. Differential Amount. (Between Earlier Planning Amount and Planning Amount that was entered now)
    In one statement, User needs all the change log details in Planning Amount to be flown to BW and saved so that he can report.
    How to create this setup.?
    Can the same  Real Time InfoCube 0CRM_C01 be used to save this information ?
    How to configure the system in Planning Layouts to capture User/Time Stamp/Amount Details.
    Any inputs in this regarding will be greatly appreciated.
    Regards
    RY

    Hi Kumar,
    Upload com.sap.logon.runtime.par(logon page .par file) into the portal.
    problem will be solved..
    regards
    Nizam

  • Report for vendor master changes

    Good day,
    Please can you assist with this issue,
    Report S_ALR_87012089,program RFKABL00
    Version ECC 6.0
    This report does not reflect the old and the new values for changed bank details.
    It does not show anything under the old value and shows **deleted** and **created** for new values.
    Thanks in advance

    You will have to do configuration in T Codes OBAT and OBAU to achieve what you want in the report.
    Check the IMG activity documentation for the following.
    SPRO -> IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Define Field Groups for Vendor Master Records.
    SPRO -> IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Group Fields for Vendor Master Records.
    Also read the RFKABL00 program documentation.

  • Vendor master changes are dynamically updating in PO

    Hi Gurus,
    If we are making any changes in the vendor master, this change is immediately available/updating on the existing Purchase Orders like address data and all. How can we avoid this. Client want this changes to reflect only on the new (future) POs after the changes made in the Vendor Master.
    I have changed the address details like street name, zipcode and phone number in the vendor master. This changes reflected in the existing (old) Purchase Orders. But the Client don't want the changes reflected on the old POs and these POs should have only the old details.
    Greatly appreciated your help on this.
    Thanks and regards
    Durai

    Hi All,
    Or how can we check the vendor details with old name that vendor changed the name say one year before.
    Thanks and regardd
    Durai

  • Vendor master change confirmation (Fk08)

    Dear Experts,
    I have an requirement that i want change vendor master details that details should be confirmed by other user in FK08 but in FK08 t.code i am getting only confirmation status (central) as "to be confirmed" and then i am able to confim that change.
    Here my problem confirm status (company code) is disabled and confirm button is also disabled.
    I want here this button should be enabled and i should cofirm the change here.
    For this do i need to change the vendor who is created at company code level or any other solution.
    Please help.
    Thanks.
    Bhaskar

    Hello,
    Please understand conception of confirm.
    The confirmation is called dual control. When you changed the sensitive fields, if any changes made to those sensitive will be asked for confirmation. Not all other fields. When the sensitive fields are being changes, the vendor master will be invialidated, unless these changes are being confirmed by the other user.
    You have configure the sensitive fields.
    IMG==> Finaicial Accounting ==> Accounts Receivables and Payables ==> Vendor Accounts ==> Master Data ==> Configure sensitive fields
    Normally, payment terms and payment methods are considered to be the sensitive fields. Select these two fields as sensitive fields. Then if you make any changes to these fields would invalidate the vendor master and only the other User is able to confirm, subject to his authorization. Until that time, the user is not valid for any transactions.
    Regards,
    Ravi

  • Report to show Vendor Master Change

    Hello Experts,
    Is there any SAP standard report which can show the new vendor details  created and the changes that are made to vendor master data.
    I know about <b>S_ALR_87012089</b>. But, it is showing only the changes made to the vendor master with Old and New values. If the new vendor is created it is showing with  <b>**Created***</b> but <b>the actual values are not shown!!!!</b>.
    But, i want to see the data instead of  that message when new Vendor Master is created. <b>How can we modify the existing one ?</b> or <b>Is there any other standard report which does this ?</b>

    Hi,
    http://help.sap.com/saphelp_45b/helpdata/en/01/a9b61b455711d182b40000e829fbfe/content.htm
    Check the above link
    Regards,
    Sridevi

  • Vendor Master Change.

    Hi,
    Can we get the details of User Name,Date and Time who
    changed the Vendor Master Record.

    Hi ,
    Any transaction to see the changes made in a range of vendor master ?
    Like the transaction mentioned above or XK04 are for single vendor but I wanted to get a report for the changes made for a range of vendor.
    regards
    Shrey

  • Vendor Master Changes

    Hi Experts,
    We have a requirement in sap. When we changes any field like payment terms Etc in vendor master, we want to capture name of the person who made request to change the payment terms etc, date of request and reason for change. Also we want those fields in vendor change record.
    How can I do that.
    Please help.
    Regards,
    GR

    You cannot capture the requestor of a change in SAP change log. You can add a text to your vendor master and with some self discipline you may enter this in the long text.
    We use a workflow in Lotus Notes, called change requests with formal approvals.
    there we log the change, then we do the change, send the workflow to the requestor and ask him to test the change in the QA system. then requestor has to give approval for the change, and we will start importing to production system.
    So we have a database where is easily can trace any change along with requestor and approvar.

Maybe you are looking for

  • Multiple World clock issues

    I travel from the U.S. to Tokyo and other Asian cities on a regular basis. Thus, have set a number major cities clocks. Problem is, They were entered in a random fashion as I visted each location. I would like to arrange them in a time zone sequence(

  • Adobe Photoshop CS5 stopped working w/ NIK (Win 7, 64 bit)

    I am getting Photoshop stopped working error when NIK plugins are used. There is no such error when NIK plugins are not used. Adobe says ... Contact NIK for latest edition {and I have such} but there are many threads on known documented CS4 and CS5 V

  • Logitech F310 Gamepad only works with Display Manager [SOLVED]

    So I bought a couple Logitech F310 gamepads, for, well, gaming, and I had a hell of a time trying to get my games to respond to them. I run XMonad, and boot it directly via xinit. On a whim, I tried activating gdm and logging into a gnome session, an

  • Price at header level then how to do billing

    Dear All, i have one scenario where the price is at header level. and for that reasoni have made the item catagory is not price relevant other wise it will ask price per each line item. now i faced the probel during the tiem of delivery after PGI whe

  • Message pagination footer in "My Threads" is erroneous

    Been seeing this for a few weeks now.. (since about mid-November)... When accessing My Threads, the footer claims more than one page of threads exist, and provides pagination links... I'v seen this happen with <20 threads in the list. Today, I have 2