Vendor master data - Contact person (4.7 release)

Hi All,
I'm working on SAP 4.7 and I can't use the contact person in the vendor master data (it's hidden) because I'm not working with a SAP retail system. If I change standard program MF02KFMR in the form RETAIL_OR_STANDARD I can change the value of the field INT_SYSDEF-SYSDEF (from 00 to 01) as SAP was retail system and the view contatct person appears.
Do you think it's a good idea or I can find some problems in the vendor master data with this change (INT_SYSDEF-SYSDEF = 01)?
Thanks and Regards,
Luca

Hi
Sorry.
Since ERP 2005, vendors master data do support maintenance of contact persons in the core.
Previously, this was true only for IS-Retail.
ALE Distribution of vendor contact persons has never been developped.
So your ADR3MAS idocs do surely integrates perfectly in the inbound system expect that this will be an orphaned Person.
The link will the contact person (KNVK) will never occurs as there is no E1KNVKM segment in CREMAS !
Alain
Should be move to

Similar Messages

  • Vendor Master : Customer Contact person

    Hi all,
    In my Vendor Master (XKo1/xko2) when i change the Customer contact details  an idoc should be triigered with these deetails.
    These data in the Contact Person View is stored in KNVK table.
    the stadard idoc Cremas idoc does no support those details.
    I used the Adr3mas03 idoc, but the required data is not tirggered.
    Is there any way around this.
    Regards,

    Hi
    Sorry.
    Since ERP 2005, vendors master data do support maintenance of contact persons in the core.
    Previously, this was true only for IS-Retail.
    ALE Distribution of vendor contact persons has never been developped.
    So your ADR3MAS idocs do surely integrates perfectly in the inbound system expect that this will be an orphaned Person.
    The link will the contact person (KNVK) will never occurs as there is no E1KNVKM segment in CREMAS !
    Alain
    Should be move to

  • RFBIKR00 - Vendor master load (Contact person address)

    I set my LSMW settings to object type 40 (vendor) and method 0002. Structure BKNVK appears. I am able to enter Contact person name and telephone in BKNVK, but I don't see the fields to enter contact person address fields. What am I missing?

    Hi Raynald,
    i think, it's not possible with rfbikr00,
    to change or load central adress-data of vendor
    or contact person.
    -> so you must use bapi or batch input (xk02 or map2)
    additionally
    regards Andreas

  • Vendor master - General data - Contact persons - Usage to send PO output

    Hello all,
    Can you please guide me in using the Vendor master -General data - Contact persons for sending Purchase order output.
    Using partner role 'CP' - is it possible to determine the PO message output automatically.
    Thanks in advance for your support.
    Thanks
    Sasi

    Hi Raja
    Thanks for your immediate response.
    Can we use the Contact persons as partners instead of vendors and trigger the PO output through email?
    What should we do for that please?
    I have tested that, but the partner number(contact person number) is not getting copied to the message in PO.
    it is looking for a address number instead of contact person number.
    Any suggestions please
    Thanks in advance for your support.
    Thanks
    Sasi

  • Contact person for vendor master data

    Hello,
    is there any other functionality for the contact person in the vendor master data apart from the merely infomation purposes?
    I mean, is it possible to use it, for example, for selecting a destination for the emails in the purchase orders, etc?
    Regards

    Hi,
    we can maintain alternative e-mail id, Phone Number, Fax Number etc. for a Vendor, go to MK02 ehter the vendor you want to change, in the Basic data view under communication tab page you can maintain all these parameters apart from the one whcih will be marked as Standard for communication.
    regards,
    Prashant Rathore.

  • Vendor master data-name 1 40 or 35 characters?

    Hi,
    In vendor master data, field name1, the data element show it has 40 characters, but in LFA1, the field length is 35.
    If I key in forty chaacters, and save, it is successful, go back to see it, it really display 40 characters, but check table:LFA1, I see only 35 characters, where other 5 character store? what is the logic of this?
    Thanks.

    Message no. AM228
    Diagnosis
    The address data maintained in field NAME1 occupies 40 of 40 characters The last 5 characters of the field NAME1 can be used only with restrictions.
    System Response
    In this form the data can be saved and used up to the complete length of 40 characters.
    In some scenarios, the system only uses the first 35 characters of name fields, of the fields 'Street', 'City', 'District', as well as the first 10 characters of the field 'Search Term 1'.
    These cases are:
    ALE: the address data can only be transferred with 35 characters (search term 1 only 10 characters) in the case of some ALE message types (IDOC types) for reasons of compatibility with other releases and components. The message types in question are:
    DEBMAS
    CREMAS
    DEBCOR
    CRECOR
    The problems do not occur if the relevant address data in IDOC ADRMAS is sent in each case, together with these message types.
    EDI: the address data can only be transferred with 35 characters (search term 1 only 10 characters) with the standard UN/EDIFACT for reasons of compatibility.
    Print: addresses are formatted with only 35 characters in some print forms for standard envelope windows. If the address number is in the address output structures, you can output the address fields in full length in forms. (See OSS note 145753 for FI forms.)
    Procedure
    If you do not want the address data to be truncated in these scenarios, only use the first 35 characters of the name fields, of the fields "Street", "City", "District" or the first 10 characters of the field "Search Term 1" during maintenance, or abbreviate the texts, if necessary.
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number

  • Missing "Mapping entry" issue in tranferring Cust/Vendor Master Data

    Hi All,
    We are doing a version upgrade in one of our client for SCM APO (SCM 7.0 SPS 8). We are getting an error while transferring customer/ vendor master data (either in foreground or background) that "No location XXXXXXXX exists for mapping entry XXXXXXX of category 1011 (1010 in case of customer).
    Please provide your valuable help to resolve this issue.
    Thanks.

    Dear Ravi.
    Please use the report ZMATMAP_REORG provided in note 859650 to remove the inconsistencies between /SAPAPO/LOCMAP and /SAPAPO/LOC.
    The number of entries in these both tables should be the same.
    I am not aware of your SCM Release, but it is also relevant for release 4.1, despite the info in the note.Please copy the report in your system and execute it firstly in the test mode.
    I hope this helps you!
    Let me know the outcome of the issue.
    Thank you!
    Will

  • Vendor master data error - check issue manueal

    Hi all,
    i got the following message when i create vendor master data, same message as error when i try to post manual check.
    " Changes for vendor 500011 not yet confirmed
    Diagnosis
    The change to sensitive fields of vendor 500011 have not been confirmed yet.
    Procedure
    You can confirm the change with transaction FK08."
    could any one give me the solution ple
    thanking you

    Dear,
    If the "sensitive field for dual control(vendor) " is defing in IMG under "preparations for creating vendor master data, then when you creating the vendor master data, the confirm is necessary. the responsible person could help you to confirm it via FK08.
    With Best Regards,
    Gladys Xing

  • *Journal Entries while uploading the vendor master data from legacy system*

    hi SAP Folks,
    can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
    Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
    thanks in advance.
    Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

    Hi
    you will be having  only one entry logically
    i.e. Opening Bal. clrng A/c Dr.
           To Vendor A/c Cr.
    regards

  • Vendor Master Data LSMW problem

    Hi,
    I have vendor master data in XLS file. Created project in LSMW with standard batch input object 004 (Vendor Master Data), Method (0001 standard) and Program name RFBIKR00.
    Other constant data:
    BLF00-TCODE = 'XK01'
    BLF00-LIFNR = 'FOX1220' ... 'FOX1221' etc
    BLF00-BUKRS = '3800'
    BLF00-EKORG = '2000'
    BLF00-KTOKK = "LIEF'
    other all data like (Bank detail, purchasing data, accounting data, dunning data) are coming from that single XLS file.
    Problem while creating Batch Input Session: <b>"Vendor FOX1221: data retention at plant level not allowed"</b>
    Why??? Reading and converting data is fine.. but still problem terminates the BDC.
    Please help me out
    Thanks,
    Chetan Shah

    Hey it is solved, just making WERKR (Data retaintion at Plant Level) = 'X'
    Thanks,
    Chetan Shah

  • Payment method not defaulting from Vendor master data

    Hi All
    I am running F110 payment run. In the Payment proposal SAP  is not pulling payment method from vendor master data for some invoice. we have like two payment methods , Sap is defaulting payment method for one type of payment method and not defaulting for the other...What could be the possible reasons?( for both the invoices We are not maintaining any payment method)

    Hi
    In F110 if payment methods are different from vendor master data and payment methods mentioned in parameters tab it will take payment methods from parameters tab, so that you have to give both payment methods in parameters tab so that it will consider both.

  • Error while replicating vendor master data from R3 to SRM

    Hi,
    I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
    Organizational unit 50000004  does not exist; check entries
    Message no. BBP_BUPA034
    I  have gone through the other posts with similar issues but haven't been able to find a solution.
    Any ideas?
    Thank you.

    hi sahlini
    did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
    BR
    \MUTHU

  • How to create automatic creation of BP from customer and vendor master data

    Hi gurus,
    can any one tell how to create automatic creation of BP from customer and vendor master data.
    Please give me the steps.
    Thanks
    Sasikanth.

    HI,
    Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
    Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
    rgds,
    Srini

  • Creation of Vendor Master Data

    Hi,
    In my company they are currently using this process to create Vendor Master Data: The Vendor Master Data is created in the Production Server and refreshed to Development Server and to Quality Server, using ALE.
    Is this the right process? If not can you let me know the steps to create Vendor Master Data.
    regards,
    raj

    Hi Raj,
    ALE and IDoc is the best way to transfer master data between SAP system. They have excellent error handling and reprocessing capabilities (Recommended by SAP).
    In order to automate the vendor master data transfer, you need to do the following steps.
    1. Create Logical System (if not available) for PROD, QA and DEV system.
    2. Create RFC Destination (SM59) from PROD to QA and DEV system.
    3. Create Distribution Model from PROD to QA/DEV (BD64) for message type CREMAS (Vendor Master).  
    4. Create Partner Profile (WE20) for message type CREMAS in PROD, QA and DEV system.
    5. Execute transaction code BD14 (Send Vendor) from PROD to QA and DEV system.
    6. To monitor the IDoc, you can use transaction code WE02.
    If you are not familiar with ALE/IDoc setup, please work with technical folk.
    Hope this will help and give an idea.
    Regards,
    Ferry Lianto

  • Upload vendor master data from legacy system to internal table tcode xk01

    through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.

    By learning the basics of BDC recording and the use of GUI_UPLOAD

Maybe you are looking for

  • PL/SQL with GOTOXY function

    Hi all new to PL/SQL wonder got anyway to create gotoxy function like C thkx in adv

  • Multi-mapping with message bundling but without using BPM

    Hi all, I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages

  • PL/SQL : read in text file

    Hi i understand that utl_file works only on server side if we want to readin text file. May i know if i do not have access to the server side, is there anyway for me to readin a text file using PL/SQL ? For some advice please Thank you Boon Yiang

  • IPad2 video mirroring

    All of a sudden my iPad2 will not provide video signal to any VGA connected device and will not provide video but will provide audio to any DVI connected device.  Was working last week.  Has anyone experienced this and what solutions can be proposed

  • 6 x 9 page size for self published book

    I want to self publish a book using a 6 x 9 inch page size. I can't seem to find this size in available list in pages. Any ideas?