Vendor Master Data LSMW problem

Hi,
I have vendor master data in XLS file. Created project in LSMW with standard batch input object 004 (Vendor Master Data), Method (0001 standard) and Program name RFBIKR00.
Other constant data:
BLF00-TCODE = 'XK01'
BLF00-LIFNR = 'FOX1220' ... 'FOX1221' etc
BLF00-BUKRS = '3800'
BLF00-EKORG = '2000'
BLF00-KTOKK = "LIEF'
other all data like (Bank detail, purchasing data, accounting data, dunning data) are coming from that single XLS file.
Problem while creating Batch Input Session: "Vendor FOX1221: data retention at plant level not allowed"
Why??? Reading and converting data is fine.. but still problem terminates the BDC.
Please help me out
Thanks,
Chetan Shah

Hey it is solved, just making WERKR (Data retaintion at Plant Level) = 'X'
Thanks,
Chetan Shah

Similar Messages

LSMW Upload vendor master data problem

Hello,
I have to upload vendor master data with LSMW.
I'm using a batch input with the program RFBIKR00.
In the step "Create batch input session", I get the following error:
FB012 Session 1 : Special character for 'empty field' is /
FB007 Session 1 session name VENDOR was opened
FB112 Trans. 1 : No transaction code was transferred
FB016 ... Last header record ...
FB014 ... BLF00-STYPE 1
FB014 ... BLF00-TCODE /
FB014 ... BLF00-LIFNR DETES998
FB014 ... BLF00-BUKRS /
FB014 ... BLF00-EKORG /
FB014 ... BLF00-KTOKK 0001
FB013 ....Editing was terminated
Does anyone know how to solve this error?
Kind regards,
Frank

Hi ,
first up all u r not mentioning the tcode and other mandatory field values...just in the field mapping and conversion step...
click -->Extras -->Layout and select all fields
and give default values to field TCODE,and other fields also and also check whether mapping conversion with regard to source is correct or not...
If still any doubts i can clarify
Regards,
Sridhar Reddy
Message was edited by: sridhar reddy kondam
Message was edited by: sridhar reddy kondam

LSMW Upload vendor master data

I am uploading vendor master data via a batch input in LSMW (program RFBIKR00).
I uploaded all the vendors for 1 company code.
When I try to upload the vendors for another company code, in the step Create Batch Input Session I get the error: Trans. 1 XK01 : Acct already exists; general area not being processed, ... Data in table BLFA1 cannot be processed.
When I try to manually create a vendor for another company code via tcode XK01, I have no problems. But when I create an existing vendor manually for another company code I dont have to add the information which is contained in table lfa1.
Therefore I tried to upload the vendor, which has to be created for the company code, with a / in the data for table lfa1. But this doesnt work.
Has somebody a suggestion to solve this problem?
Thanks

In the similar thread you said:
"If the vendor exists in LFA1 but not LFB1, use XK02 with the structures for LFA1. Then use XK01 with the structures for LFB1."
It is not possible to use XK02 in order to create the vendor for another company code if the vendor already exists with a certain company code. You will get the error "Vendor xxx has not been created for company code yyy".
The problem is that LSMW requires a mapping onto structure LFA1, but when the vendor already exists for a certain company code, LSMW returns in the step "Create Batch Input Session" the error: "Trans. 1 XK01 : Acct already exists; general area not being processed, ... Data in table BLFA1 cannot be processed".

LSMW - Vendor Master DATA - IBAN management

Dear SAP guru's,
I'm trying to integrate the IBAN in vendor master data with my LSMW (batch recording techno).
unfortunately, I do not have the IBAN information in structure BLFBK
BLFBK Vendor Master Record Bank Data (Batch Input Structure)
DO you know how we can integrate an IBAN by LSMW? Batch recording seems to be too risky..
And I do not have the BBAN info, I only receive the IBAN...
Thanks for your comments,
Karim

Hello,
With batch, it is not possible to have IBAN details updated in Vendor master data. This should be done manually, when the IBAN
number is entered system will do the validation checks as per the legal requirements using the specific Function modules for each country.
Nevertheless, there is batch input program RFBIKR00 which is used for processing the following data:
- Creating and changing vendor master data
- Creating bank master data
Please, note that the program RFBIKR00 cannot import master data which contains the usual account number and the IBAN at the same time. There has to be either an IBAN or an account number in the imported file.
There are 2 scenarios how to get all the data imported, depending from
the source system:
1. If the source is also an SAP system, you can import the account numbers using the RFBIKR00 and then transport the IBANs separately using the ALE distribution (RFIBAN_ALE).
2. If the source is a non SAP System, then file contains always two entries for a payment instruction. In the first one the account number will be imported, in the second one the IBAN. The functionality "IBAN without account number" is prerequisited and has to be active in the target system. In this scenario 2 payment instructions would be created in the vendor master(LFBK), one with the account number, another one with the IBAN.
I hope this helps to resolve the problem.
Thanks and regards,
Suresh Jayanthi.

Vendor Master data problem?? urgent please

hi,
i am trying to populate the vendor master data(name) into the cube. but the data is not there in /BI0/TVENDOR table. what could be the problem? what should i do to populate the NAME in to the cube. i have done transformations in update rules with 0VENDOR.
regards

HI Venu,
If u want to use that characteristic in the cube and if u want to load the data to that characteristic then make that characteristic as a exclusive attibute and use that characteristic in the cube and in transformation give the mapping with read master data.. remember this will give u the fact but not the present truth.....
If u just want to display that vendor name as characteristic and which u dont want to depend on the main master data object then make that object as a navigation attibute....
Khaja

Upload Vendor master data using LSMW

Hi All,
i am working on LSMW for uploading the Vendor master data (XK01),
when i execute the 13 th step (Create batch input session), i got a message like
"Editing was terminated" .
Could you please tell me why that message is comming.
Regards,
Amjad.

hi
good
try with these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/smartforms/smartform%20in%20abap.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/smartforms/tutorial%20with%20code%20sample%20on%20smart%20forms.pdf
thanks
mrutyun^

Problem posting Vendor Master Data

Hi,
We are posting Vendor Master data from MDM to ECC. We have serialized ADRMAS and CREMAS so that ADRMAS is always posted first and then CREMAS. ADRMAS is always posted correctly but for some reason the link between ADRMAS and its following CREMAS is not getting established. Because of that CREMAS is failing.
We have explored all possible workarounds but nothing is working. Please note that in ECC, the number ranges are set to external numbers. The number ranges in ECC start with leading zeros. We are sending vendor numbers in the same format with leading zeros. However, I have this gut feeling that these leading zeros are causing the problem but I am not sure.
Another thing is that if we create a vendor in ECC and then send data from MDM to update it, we can successfully do that. It's just the new vendor creation that is causing problem.
Please also note that we are using '005' as message function. I have also tried '009' but it's not working either.
Any suggestion, solution, workaround will be highly appreciated.
Thanks,
TS

Hi Michael,
Yes, that's always the case. The <ADRMASxx>-<E1ADRMAS>-<OBJ_ID> and <CREMASxx>-<E1LFA1M>-<LIFNR> both are mapped to our vendor number.
We are using ECC 6.0. I have tried distributing vendors with and without leading zeros but in either case it didn't work.
Here's the error message that we get while posting CREMAS
"Fill all required fields SAPMF02K 0111 ADDR1_DATA-DEFLT_COMM"
Message no. F2282
However, when we check the ADRMAS, we can see a value 'LET' against 'COMM_TYPE' field. It is not empty.
Any help will be greatly appreciated.
TS

To update Vendor master data

I have 4300 records in vendor master data LFA1. I have to update industry code corresponding to each vendor .
Can anyone suggest me how can i do it ?
Is there any t-code availaible to do it. So i can make BDC program to do this.
Help me on this ...
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jun 24, 2011 4:20 PM

Hey XK02 is for Vendor Master change.
Make sure if you write BDC check the flag No BatchInput in SHDB recording.
Or else Use the MASS transaction for doing so.
Since you want to change only one field data LSMW is also simple way to do it.
Hope this Helps,
Regards,
Bhargav

Vendor Master Data Transfer Between the Clients

Hello Everyone,
I want to transfer Vendor master data between the clients, can any one help me in this Please?
I don't want to use LSMW, Is there any other method by which i can copy the vendor between the clients or i have to do it manually?
Please Help ASAP
Thanks
M

Hi,
You have to do necessary setting for ALE and IDOC will get generated and data will get transfer based on the Program Schedule in Bacground.
You can schedule program in bacground as per your requirement of IDOC transfer and data generation from One Client to other. [i.e. end of the day, Hourly, monthly etc.]
Regards,
Manish

Vendor master data upload

how do we upload vendor master data into SAP from legacy system.can anyone give me a detailed explination.
regards,
deepthi

Deepthi,
The steps would be (in LSMW) :
1 Create a new Project, Subproject (if not existing). Then give a name for the Object, say VendorMaster.
2 On the next screen, you will see several steps (radio buttons) to be performed. You should go in sequential order.
Double click the first, I think its called Maintain Object (sorry don't have access to SAP system right now)
3 On this screen you will see various options/methods (in the second section) for loading the data.
You may select which ever is appropriate or most suitable in your case.
Let's assume you want to use the very first options - Standard program for Direct Input/Batch.
4 Pull down (F4) for the Object & select Vendor Master.
5 Pull down again for the Method & select (I think( Standard). The program name & Type will be populated by LSMW.
If let's say none of the programs in this list satisfies your requirement, then you may decide to go for a Recording or a BAPI (again pull down & select appropriate method) or IDoc (CREMAS).
So now you have decided on the method you want to use for posting the Vendor Master data. Save the information & go back to the main screen of the object.
6 Double click on the next step for maintaining the Source Structure. Give the name(s) of the Source Structure(s).
7 Next step is to define the Source Structure(s) format (fields, attributes etc).
8 Next you maintain the relationship between the Structure(s) - Source & Target. The Target structures depend upon the method elected by you in step 5.
9 Next will be the most important step - ie specifying the mapping/conversion rules for each Target field. You can even write ABAP code by double clicking on the field - it will open up the editor where you can put in your ABAP code. There are also several events available - for instance at the Beginning of Processing or Beginning of Transaction etc. where again you can specify your own logic.
10 In the Next 2 steps you will give the file name & path & also associate the file(s) to the Source structure(s).
The develoment for the object is complete. Now you are ready to read, convert & post your Vendor Master data in SAP.
Let me know if you need additional assistance.
Regards,
Homiar.

Vendor master data-name 1 40 or 35 characters?

Hi,
In vendor master data, field name1, the data element show it has 40 characters, but in LFA1, the field length is 35.
If I key in forty chaacters, and save, it is successful, go back to see it, it really display 40 characters, but check table:LFA1, I see only 35 characters, where other 5 character store? what is the logic of this?
Thanks.

Message no. AM228
Diagnosis
The address data maintained in field NAME1 occupies 40 of 40 characters The last 5 characters of the field NAME1 can be used only with restrictions.
System Response
In this form the data can be saved and used up to the complete length of 40 characters.
In some scenarios, the system only uses the first 35 characters of name fields, of the fields 'Street', 'City', 'District', as well as the first 10 characters of the field 'Search Term 1'.
These cases are:
ALE: the address data can only be transferred with 35 characters (search term 1 only 10 characters) in the case of some ALE message types (IDOC types) for reasons of compatibility with other releases and components. The message types in question are:
DEBMAS
CREMAS
DEBCOR
CRECOR
The problems do not occur if the relevant address data in IDOC ADRMAS is sent in each case, together with these message types.
EDI: the address data can only be transferred with 35 characters (search term 1 only 10 characters) with the standard UN/EDIFACT for reasons of compatibility.
Print: addresses are formatted with only 35 characters in some print forms for standard envelope windows. If the address number is in the address output structures, you can output the address fields in full length in forms. (See OSS note 145753 for FI forms.)
Procedure
If you do not want the address data to be truncated in these scenarios, only use the first 35 characters of the name fields, of the fields "Street", "City", "District" or the first 10 characters of the field "Search Term 1" during maintenance, or abbreviate the texts, if necessary.
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number

No view of the changes of Customer /Vendor master data

Hi Experts,
I have a problem, when I run the standard report to view the changes of customer/vendor master data, I don't find the change relative to a bank account .
I found in the report the technical field that the user has changed, but I haven't found the text of the data in the tab "bank account".
Can you help me, please?
Thanks in advance.
Best regards
Giampaolo

Dear Ram,
thank you for your answer , but my problem is still present. If I want to see the modify of the Customer/Vendor Master Data for the Payment transaction Data details, I don't try this information in the TCODE FD04.
Do you know a different report or TCODE that I can use?
Thank you in advance.
Best Regards
Giampaolo

Urgent: vendor master data

one of the scenario which i am working at my client place, we are actually getting vendor master data from other place, so what are the fields we need to get from that place
actually we might use IDOC or batch job to upload data into your system
please suggest me what might be the best way to upload the data
thanks in advance

Try creating a dummy vendor in that company code and note all the mandatory fields. These will be the bare minimum fields that you may need to pull from.
There is a feature called LSMW, if you are not aware, a cool feature to upload mass data like master data.

Issue with Vendor Master Data-field notes ID (Table ADRT-REMARK)

Hello,
I have a issue related to Vendor Master Data maintenance.
The client wants to maintain the u201CNotesu201D field in vendor master data. The field gets populated from the field u201CADTR-REMARKu201D table ADRT.
Now client wants to maintain some alphabet to distinguish some of vendors (i.e. 1250) out of 5000 vendors. We tried to develop LSMW, however it is not getting generated as this field is not getting recorded as the field is inside the tab (next to e-mail id field) which requires click. It seems BDC also is also not working as it is not populating these fields except e-mail id.
The table ADRT contains filed ADDRNUMBER which is the same field in LFA1, and it is ADRNR (Address number).
Also please note that CATT/e CATT is not permitted at all the client level.
Can any body suggest the way to change the master data through some way.
Regards,
Chepan

Hi,
Did you heard about SAP GUI Scripting? There is SAP functionality - seems to Excel Macros. You are able to record SAP like macros, then after small code modifcation (code is in Visual Basic), and special excel origin (there could be excel prepared like for CATT) upload data to VMD.
If you have any questions I try to help you?
Best regards,
Piotr
Edited by: Piotr Wieczerzak on Jan 26, 2010 9:35 PM

Upload vendor master data long texts to CRM

Hi
I do have the same problem of this thread:
[CRM Middleware - R3 to CRM - Long Text transfer |CRM Middleware - R3 to CRM - Long Text transfer]
Does anyone know how to upload long texts of Vendor master data to Business Partner mater data?
Thanks in advance for any help
Pierluigi

By learning the basics of BDC recording and the use of GUI_UPLOAD

Vendor Master Data LSMW problem

Similar Messages

Maybe you are looking for