Vendor Master partner functions change at plant level

Hello All,
  I need to change the vendor partner functions at the plant level.By default it takes the partner no equal to vendor no.But in my requirement the partner no can be differnt than the vendor no.Can anyone let me know how to do this?I cant do a BDC recording
also since the system cant automatically select the plant no in the table control.
Thanks,
Rakesh.

Hello Jürgen!
Thanks!
Do you know of any user exit which will help on this.
Best Regards

Similar Messages

  • Vendor Master Partner Function

    Vendor Master Partner Function - Alternate/Permitted payee configuration pls tell me configuration

    Hi:
    For Creating Vendor master, refer to SAP Best pratices
    help.sap.com/bp_iasifrsv1470/BBlibrary/Documentation/I50_BPP_EN_DE.doc
    For Vendor Master Partner Function
    http://www.copacustomhelp.state.pa.us/infopak/nav/procurement/pr%20master%20data/file1539/index.htm
    http://www.sap-img.com/materials/procedure-for-setting-partner-functions.htm
    For Permitted Payee in Vendor Master, refer to
    vendor permitted as payee
    For Alternate Payee in Vendor Master
    help.sap.com/bp_bblibrary/500/Documentation/J03_BPP_01_EN_IN.doc
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • Vendor master - Partner functions

    Hello Team,
    There is a vendor master with partner functions maintained for OA (Ordering address) There are 4 different ordering address vendors maintained in this vendor master.
    Let us say Vendor A ---> has OA's - 1,2,3,4
    Now when a PO is created a screen pops up to choose the reqd OA's for the vendor and only one will  be chosen by the user.
    Now this is changeable at PO level - ME22N
    Let me get straight to the question
    CAN WE RESTRICT THE ICHANGE OF OA's IN THE PO ONLY TO THE EXTENT OF WHAT IS MAINTAINED IN THE VENDOR MASTER.
    Right now the system is allowing to change in the PO any  OA vendor other  than what is maintained in the vendor master.
    I know this is because OA account group, let us say W1 is assigned to other 4 account groups W2,W3,W4,W5.
    I don't want to change this config to retsrict this by changing the above setting.
    As told in on line above, Issue is,  any vendor from these 4 account groups W2,W3,W4,W5 , if input in the partner functions at PO level, the system is picking up and I do not want that to happen.
    My requirement is to change in the PO only to the extent of OA's maintained in the Vendor master.
    Thanks for your patience on this  lengthy explanation, TRYING TO BE AS CLEAR AS POSSIBLE.
    Best Regards

    Hello Jürgen!
    Thanks!
    Do you know of any user exit which will help on this.
    Best Regards

  • Upload program for Vendor master Partner Data in XK02 needed info

    Hello Experts,
    I need to write data uplaod program for XK02 for vendor master Partner functions. ( Basically we created some custom partner functions and attach it to many existing vendors ).
    So kindly advice me which is the suitable upload method for this.
    1) There is no BAPI available for editing vendors.
    2) BDC is not possible because the Vendor partner screen is having table control and some records are already filled. (No of row not fixed).
    Is there any IDOC available or any standard input pgm?
    Please give suggestion.
    Thanks and rgds,
    Anand

    For the IDOC perspective, you can uses CREMAS.
    For the mass maintenance you still have XK99 (which also uses CREMAS internally)
    True there is NO BAPI
    For the BDC and the table control. Well this is not really true.
    In batchinput, instead of maintaining the rows by there Number, you should select it at the first position.
    OK-CODE /06 will open a selection screen SAPMF02K 2324. The result of the selection screen goes to the first line of the table control.
    Of course this works only in BDC
    reward points if helpful
    Edited by: Alain Bacchi  on Jun 18, 2008 8:48 AM

  • Mass Changes to Customer Master partner functions

    Hi Gurus,
    I would like to change PE (Sales employee) MASS please guide me.
    Thanks

    Hi,
    Goto the T.Code "XD99".Or Goto the T.Code "MASS".Here(In MASS T.Code),select teh Object Type as "KNA1".
    Click on Tables.
    Select "Customer Master Partner Functions(KNVP)".
    Click on Execute.
    Enter the range of Customer Numbers/single values in the multiple values.
    Select the Partner Function as "PE".
    Execute.
    Click on Select Fields(First Icon under Customer master partner functions).
    Select "Customer(KNVP-KUNNR)" and click on Choose.
    Enter.
    Enter the value for the field "New Values" and ensure that all rows are selected.
    Click on the icon "Carry out a mass Change"(sixth icon).
    Save.
    Regards,
    Krishna.

  • Replication of Vendor BBP_VENDOR_SYNC - Partner Function required?

    Hi everyone - quick one here...
    We are running Vendor Replication from R3 to SRM, and are using Replication Program BBP_VENDOR_SYNC overnight to do this. I am aware that we need Purchase Org Data setup for replication to occur.
    Now we have 2 Account groups, 1 with Partner Functions VN, OA, and PI, and the other Account Group with NO Partner functions setup.
    Replication picks up the Vendors with partner functions, and misses the ones with no Partner Functions. The only way to replicate the vendors with no Partner Functions is for us to manually run the old BBPGETVD.
    Am I correct in assuming that at least one Partner function (VN?) is a prererquisite in order for BBP_VENDOR_SYNC program to work?
    Thanks in advance for any feedback!
    Barnaby

    NOT ANSWERED BY ANYONE BUT WILL CANCEL

  • Customer Master Partner Functions

    Hello,
    We are looking for standard extractor on Customer Master Partner Functions, which is based on table KNVP. Also extractor on Partner Functions Text from table TPART.
    I searched in SAP HELP with no result.
    someone has an idea?
    Thanks,
    Maya

    Shalom Maya,
    Normally, the fastest way to look for a datasource is to search help.sap.com.
    In this case if seems like for KNVP there is no standard extraction, so might need to create your own generic extractor.
    Take a look at the following posting (It might help you achieve your requirement):
    Re: Partner functions (R/3 table KNVP)
    Bye,
    Gilad

  • Userexit  for partner function changed

    What is the userexit for partner function changes in VA01 or VA02.

    Hi,
    Please check this:
    EXIT_SAPLEINM_002
    Thanks and best Regards,
    Suresh

  • Partner function change in sales order

    Hi,
    I have partner function ZR (sales employee) defined for customer master. I enter a particular employee no 100 in the customer master. and subsequnetly the partner function ZR gets copied into a contract with value 100.
    now another user is trying to change the value to 200 from 100, but the system is giving a message that partner function ZR not defned for partner procedure.
    If i go to partner determination for  sales order , then i see that there is no partner function ZR assigned for a patner procedure.
    my question is that the above is happening due to lack of master data for emploee id 200 from HR module or is it that we have to maitain partner function ZR for sales order (I have seen that ZR is not maintained for sales order. ).Iam assuming that for contracts aslo, the config needs to be done in parnter determination for sales order.
    regards
    sachin

    Hi Sachin,
    I assume that you have configured the partner functions for Customer master including ZR, also enabled ZR for the partner procedure applicable for the sales document type.
    If this is done, then the partner function ZR should be available for entry in the sales order.
    Now the problem is that
    You shoudl have assigned the partner function ZR to some account group, while creating this partner function, and customer 100 shoudl have belonged to this account group.
    However the customer 200 whom you want to update as the new ZR doesnt belong to this account group.
    You can use only those customers belonging to the account group which is linked to the partner function ZR as sales employees.
    So find out the customers belonging to the account group, which is linked to the partner function ZR. Make sure their masterdata is correct for the sales area which you wnat to use. If all the things satisfy, then you should be able to use them as ZR partner in your sales document.
    This should solve your problem.
    Pls reward if this helps you to solve the problem

  • Custom field in Vendor Master - track field changes

    Hi Experts,
    I have a requirement to enhance vendor master (XK01) by adding custom fields. I did this, but now the customer needs to track changes made to this field. He expects to see the changes made to this custom field using menu path 'Environment -> Field Changes' from vendor master transactions (XK01, XK02, XK03). I have enabled the track changes in the data element, so that field changes can be tracked in CDPOS, but that is not enough. Please help to find solution. Thanks.
    Regards
    Arun

    Hi Brad,
    I added the new fields to vendor master using the SPRO option:
    'Prepare Modification-Free enhancement of Vendor Master Record' in the following path:
    Logistics-General -> Business Partner -> Vendors -> Control -> Adoption of customer's own master data fields. This created a button on vendor master, and my field is in a pop up box which is generated on click of this button.
    This field is stored in LFM2 table.
    I have enabled the change flag in the data element of the custom field, and it is showning the field changes in CDPOS table.
    But the problem I face is how I can avoid going to the CDPOS table and instead use the menu option :
    'Environment -> Field Changes'
    Regards
    Arun

  • Extract customer master partner functions.

    Hi ,
    We are generating an sales order extract we also need to provide customer details.I understand  that the customer address data should read from transactional ADRC table.Could you please suggest  which ship-to address should be put in the customer master  extract  in case have more than one ship-to address considering customer id the unique primary key.
    I assume that customer master is on transactional level and customer id is bill-to partner function.In that case How to identify the ship-to address in both customer master and billing document?
    Suppose we have such case(it is very common in best practice)
    Invoice     CustomerID(bill-to)     bill-to address     ship-to ID     ship to address
    123     A     A-001     B     B-001
    124     A     A-001     C     C-001
    We have customer id u201CAu201D, but we are not able to know that we should put u201CB-001u201D or u201CC-001u201D as our ship to address in customer master.
    Could you please advise.
    Amy

    How to identify the ship-to address in both customer master and billing document?
    To find ship-to number in the customer master, use table KNVP and from billing document use table VBPA.In the output the partner function WE represents the ship-to number. From these tables, get the address numbers (field ADRNR) for WE partner function and pass in table ADRC to find the address details.
    Regards,

  • Avoiding choosing any vendor like partner functions in PO

    For a vendor I have several partner functions in the Vendor Master. And several registers for each one.
    For example: Vendor 1 has defined this partners functions
    Vendor                  0001
    Ordering address  0001
    Ordering address  0002
    But in the purchase order I  can choose as partner function "ordering address" any vendor from the Vendor Master (for example anyone different from 0001 and 0002). Is there any way to restrict in the PO so the user can only choose any vendor defined like partner function in the vendor master?
    Thanks,
    Rodrigo

    Hi,
    Try making ordering address partner function as non editable for your PO, then possibly the system will give popuup only from address in vendor master,
    let us know how it works
    reg
    dheeraj

  • Customer Master - Partner Function

    Hi,
    I have created customer by using T-code xd01 and maintained partner functions for the same. But now when am trying to change partner function through the t-code xd02 it is showing me error as "In table TPAER, the entry AG AG  is missing"
    i tried to maintain the key in VOPA but still not resolved. Can you please suggest.
    Thanks
    Ashwini

    Hi,
    Can you please explain briefly so based on that i can give the guidance
    other wise follow the steps which is related to partner Determination procedure
    Hi,
    SPRO / Sales & Distribution / Basic Function / Partner Determination / Set up Partner Determination
    in that path we have to maintain the partner Determination
    1. Setup partner determination for Customer Master
    2.Setup partner determination for Sales Document Header
    3. Setup partner determination for Sales Document Items
    4.Setup partner determination for Delivery
    5. Setup partner determination for Billing Header
    6. Setup partner determination for Billing Item
    Each and every step we follow the five steps which i mentioned previous answer
    Step 1: Define Partner Functions
    Step 2: Assigning Partner Functions to Account Group.
    Step 3: Define Partner Determination Procedure.
    Step 4: Placing Partner Functions in Procedure.
    Step 5: Assigning Procedure to Account Group.
    based on your Requirements we have to do settings
    Revert if you get any error
    I hope your Clear
    Regards,
    Prasanna

  • Vendor master data - massive change

    Hello all,
    I have to change payment method for several vendors.
    Do you know how to do a massive change in vendor master data?
    Thanks,
    Davide

    Hi:
             Please execute XK99...Vendor Master (Company Code)....LFB1.
             Regards
    Edited by: Atif Farooq on Oct 4, 2011 12:30 PM

  • Vendor master sensitive field change

    Dear All..
    I have configured vendor master change sensitive field in this i have added some fields. If some body will change this field system will tell the warning message and it will go to confirmation of change will done by other user in FK08 .
    My problem is i want to control this only for vendor master changes. but its asking confirmation for vendor master creation also.
                       Any other configuration required.
    Regards
    P.Anandhakumar..
    Edited by: Anandhakumar Palanisamy on Dec 3, 2008 9:42 AM

    hi AK
    also check in SPRO > financial accounting new > accnt reciveable and payable> vendor accounts > master data > preparations for changing vendor master data
    may be u can controll thuru authorization objects
    kaustubh

Maybe you are looking for