Vendor name in FBL1N

Can I see the vendor name in FBL1n?

HI,
to see the vendor name in FBL1n,
take menu path(after line items disply) settings-> special fields. then you will go to change view "line layout vaiant special fields" then click on new entries
enter table name : BSEG field name: LIFNR
save your entry.
Later Go to SA38 or SE38 and execute program BALVBUFDEL .
Table Name
Table from which the fields in the list are displayed. Depending on the list category, the following specifications would be appropriate:
The other fields you can enter here is:
o Category 1: BSEG, RF05L
o Category 2: RFPOS, BKPF, BSEG, BSEC, BSED
o Category 3: RFOPS
Note: Each variant which displays other fields as well as the RFPOS fields becomes a "special variant", that is the performance of the transactions for the line item display gets worse with displays which use these
special variants.

Similar Messages

  • Vendor Name in FBL1N report

    Hello,
    How can we add vendor name in report layout of FBL1N (vendor line item display)? I tried to do define it in additional fields for line item display in customization.
    But the table LFA1 is not defined in table T021S. Is it possible to add tables apart from BSEG, BKPF which are already there.
    Regards,
    TP

    Hello TP,
    If you want to append additional columns like LFA1-NAME1 to FBL*N report, please refer OSS note below.
    Note 984305 - Line item: Definition of special fields (T021S)
    Regards,
    Burak

  • How do I get vendor name in FBL1N for multiple vendors

    Hi gurus.  When I run FBL1N for a single vendor, the vendor name shows up.  If I run FBL1N for multiple vendors, the list is subtotaled by vendor number, but the name goes away.  How can I get the vendor name show up when the list is for multiple vendors?
    Thanks
    Janet

    Well, we'll just have to deal with the header data.  It is REALLY strange to me that NAME1 is a field you can choose in this report but not in FBL1N.
    By the way, we try very hard to give our users a usable solution so that they don't have to download to excel.  However, SAP doesn't always cooperate......  : (
    Thanks again for your help today.  You have solved my problem.

  • Vendor Name Appearing Different for Different Line Items in FBL1N

    Hi,
    I am executing FBL1N and changing the layout to include the Vendor Name in the line items. But when the line items are appearing, the Vendor Name is appearing different for different documents. I wish to see from where the system is picking up the name, so that I can rectify this. But since the layout is being changed after the report is executed, the debug window is taking me in this. Can someone help me please how to debug so that I can see from where the name is coming?
    Thanks and Regards,
    Sameer Joshi

    Hi Raymond,
    Yes it was due to the BADI.
    Thanks for your reply.
    Thanks and Regards,
    Sameer Joshi

  • Add vendor name to output list in FBL1n

    For transaction FBL1n i would like to add the vendor name (LFA1-NAME1) as a special field. However, this field is not available (only for one-time vendor) with OBVU.
    Is it possible to add this field and if so, how can i add it?
    thanks and regards,
    Marlies

    HI,
    As you probaby already know you can display the Vendor name in the header but not in the line items, this is standard functionality.
    The Vendor Name may be displayed in the Header Data via the following Menu path in FBL1N : Settings > Display Variant > Current Header Rows. please check SAP Note 181592 explains how to set up the Headers. Also reveiw note 181697.
    Further it is not possible to include NAME1 in the line item display of 'normal' Vendors.  This should only be possible for one-time vendors through table BSEC. The only area this can be included is in the header data.
    I have to tell you that you can only see as standard fields in your line  item display all fields from structure RFPOSX.
    Additionally, you can add special fields to see more fields. But these special fields can only be taken from the following tables:
    BKPF//BSEC//BSED//BSEG//PAYR//BSEGC//BSBV
    That's why you can't add the fields  ADDR1_DATA_NAME or LFA1_NAME1.
    Regards
    Ravinagh Boni

  • Supress Vendor name in std report S_ALR_87012103 - Vendors: Items

    Hi ,
    I am using report 'S_ALR_87012103 - Vendors: Items -> List of Vendor Line Items' to list the vendor open items and in the output the vendor name with address is displayed, I want to supress name and address so that when I download to excel it will easier for me to change the columns.
    Than

    Try using FBL1N instead of this report, which does not show address.
    Regards,
    SDNer

  • Report for vendor no., vendor name for good receipt documents on KSB1

    Hello,
    My client needs vendors on KSB1 report. I told them about offseting  account, but it doesn't show vendor for good receipt documents.
    Is there any place else they can view vendor, vendor name for those good receipt documents .
    Any MM report or AP report .
    Thanks,
    T.G

    Hi,
    Please go to FBL1N, In Dynamic Selection give document as "WE", this will give and enable Purchase Order Number
    This will give you Vendor Name, Purchase Order and  FI Document number or u can try MB51, there you will not get Vendor Name, but you will get Vendor Code, Material Document Number and Purchase Order Number
    Br,Vivek
    Edited by: View_taurian on Oct 22, 2011 12:01 AM

  • Vendor name in g/l line item display

    Hi,
    I have a requirement to get the name of the Vendor in line item display of Rec. G/L code. In standard reports FBL1N and FAGLL03 we can get only vendor code. Is there any possibility to insert the vendor name in standard report or any alternative report available in the system.

    Hi Sridhar,
    If you want to display the report on the system, then you may look at the options suggested above by other friends.
    If your requirement is to download the report, then you can have a vendor list seperately, download the normal FAGLL03 report and run a simple vlookup function and get the names of the vendors.
    Regards,
    Mike

  • FI Report to display Profit center and Vendor name

    Hi,
    We are using 6.0 version.
    Can you please suggest a Standard report which can give me the Actual line items with GL line item detail with Vendor name & Profit center.
    FAGLL03, is not giving me Vendor name.
    Please advise.
    Thanks,
    Pavan.

    Hi,
    This FAGLL03 for GL account line item display.
    Here you can see all the GL account for example if you are looking Salary accout how you will expect th vendor name over there.
    Vendor display is different area right
    FBL1N
    If you want add vendor in the FAGLL03, the go to SHD0 added vendor name there and complete the steps
    Warm
    Shiv

  • Display full length of vendor name in report !

    Dear all,
    as i know, we can enter up to 50 chars into Vendor name field in Vendor maintain screen (FK01).
    But, when i check in Vendor balance (FK10N), Line item display (FBL1N) only 35 chars of Vendor name is displayed.
    please help to show me how to show full length (50 chars) on those reports or which report should i use to see full length of Vendor name !?
    many thanks !

    As per my knowledge you can enter only upto 40 characters in name field in Vendor maintain screen (FK01).
    The same will also show up in FK10N and FBL1N

  • GR/IR:  Open receipts with vendor name

    Hello SAP Gurus-
    I am not sure if we are doing something wrong but we are currently reconciling our GR/IR account and what we noticed is that when we added the vendor name to the report with the help of an OSS note, we noticed that it gives us all transactions that make up the balance however it isn't what we wanted exactly.
    What we were looking for was once we execute MR11 and handle all differences, we want to see only open receipts with the Vendor name.  How can we achieve this?  Is there a report?  Should the GR/IR account be set up as a clearing account?
    Any help/ insight is greatly appreciated!

    figured it out

  • Adding vendor name to Position part in report Payment List - s_p99_41000099

    HI,
    How can I add Vendor Name to detail level of the Payment List report (transaction s_p99_41000099). Change Layout window allows to add Vendor Name to the header level and Vendor Number to the detail level. Users want to export report into Excel and then sort/filter it by vendor name at the detail level.
    Is there any way to add vendor name to the list of columns available at detail level?
    Thanks in advance.

    Resolved by using Check Register

  • In Payment Order Vendor Name Display

    Hi All,
    Is it Possible to view the Vendor name in the Payment order, as now we able to see the vendor code only.
    We required vendor name in the payment order(F110).
    Anyone have idea pls update me.
    Regards,

    hi,
    If you are talking about report output then Open your query in query designer, click on vendor, on the right hand side you will see display tab and in display as list box choose key and text. This will display your vendor name as well with its code.
    Hope this helps
    regards,
    ray

  • Vendor name not showing correctly in TDS GL line item display fbl3n

    Hi Gurus,
    I am facing an issue in regards to TDS. As you know that normally we make a cheque payment to a vendor, we issue one cheque for one vendor.
    But my client follows a slightly different practice. Suppose they have to pay an amount of 30000 to three vendor A B C equally 10000 each. They right a self cheque to the SBI bank and also send them the list of these 3 vendors who are also having their account in the same bank. They instruct the bank to take money from their  account and then credit in the respective vendors account.
    Now the transaction goes like this:
    Vendor A   10000
    Vendor B    10000
    Vendor C   10000
        To Bank                 29700
        To TDS on A              100
        To TDS on B              100
        To TDS on C              100
    Now when the user will go to FBL3N and check the TDS GL 100020196 and see the line items it should show like as per the client:
    Vendor A       100
    Vendor B       100
    Vendor C       100
    But it shows the below result:
    Vendor A   100
    Vendor A   100   ( should be vendor B)
    Vendor A   100   (should be vendor C)
    I believe that is the standard behavior of the system to show the vendor line. They do not want to change the way of their posting and their concern is if it shows like the same at the time of return filing how will know vendor wise tds.
    Now either I need to resolve this situation in FBL3N or give them a report which should give them Vendor wise TDS information for the TDS filing.
    J1INMIS report is there but it shows only the TDS and the vendor number, it does not give the vendor name. I either want a solution of this issue in FBL3N or a report which shows vendor wise TDS with vendor number and name. Please let me know if there is a solution to this issue.
    Kindly consider this very urgent.  I am attaching the relevant screenshots.
    Thanks
    Urmila

    Hi
    Unfortunately there is no report in SAP other than J1INMIS which caters to Indian reporting requirements. You can think of enhancing the same.
    Also check your enhancement for FBL3N as to why it is not working as it should with the help of your ABAP Colleagues. It is not displaying the name correctly.
    Thanks & regards
    Sanil Bhandari

  • Report GL Account Line Item with vendor name and VAT registration number

    Hi,
    Is there any standard SAP report/inquiry for GL Account Line Item like FBL3N, with information vendor name and VAT Registration Number (field STCEG) without using ABAP.
    Thanks.

    Hi,
    We can get purchase register through T.Code: 'J1I2' by specifying condition types and tax codes.
    We can't get 100% report from this T.Code.
    Check it once.
    Regards,
    Padmaja N.

Maybe you are looking for