Vendor Not specified in MMBE(WM stock)

Hi,
For a particular material in MMBE transaction,when we select 'WM stock' from 'Environment',the system gives the following message. "Vendor not specified".
for this message,Can somebody throw light on this issue please?
With Regards,
Jaheer.

  When I double click it is saying "choose valid function 
this sounds like it is not a  status message, do you have this message in a pop-up? in this case click the the yellow question mark.
I am not on a SAP system today, that why I am asking for the number, other wise I would have searched with the message in table T100 to see its message number.
Then I would have gone to SE91 transaction to obtain long text to the message, or to use the where used button to see the program code that issues the message. here one (who can ABAP) can easily obtain the circumstance when the message is issued.
B K, even when stock is loaded with 561,it is possible to load with vendor information.

Similar Messages

  • Error : T161W: Vendor+subcontracting vendor not allowed for 2-step stock tr

    Hi Gurus,
    When we creating a STO to sub contractor vendor ( in the delivery address tab we are entering the vendor # and activating the SC vendor check box)we are getting the error message as "T161W: Vendor+subcontracting vendor not allowed for 2-step stock transfer".
    Message no: MEPO140
    Note:
    The STO is creating with out error in ECC 5.0 for the above scenario but when i'm  trying  the same in ECC 6.0 in another system I'm getting this error, Can any one please advice.
    Thanks in advance,
    Sai

    Hi Charlie
    I had same issue and we sloved it. but i have one more issue here.
    We have created Po and SC Vendor is not check marked. When we go into the change mode of Po i can't see the field at all. but its availalbe in disply mode.
    I am using ECC 6.0, Please suggest why this is happening. I need to put check mark for SC vendor.
    thanks,
    Raju

  • ''Vendor not specified'' error while accesing SXMB_IFR t-code in ECC 6.0

    Hi,
    I have installed ECC 6.0 server & i have selected PI component while installing. Installation is successfully completed. But when iam accessing the SXMB_IFR t-code it is showing the error " Vendor not specified " .
    Please can any body suggest me what to do with this error. I need to apply any patches or any content to the server?.
    Please suggest me.
    Thanks in Advance,
    Babu.

    HI Kishore
    Hope these can help you. i used the same
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c3b830-9a54-2b10-008f-b8547efc040a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20669448-9a54-2b10-89b5-ff50f6de8061
    With these for Post installation
    Logon to the NWA with administrator id and password and Click on the Deploy and Change execute the template installer please refer the following for more information
    Configuration : Go to the following:
    http://service.sap.com/instguidesNW2004s -> Installation -> Technology
    Consultant's Guide. -> Enabling Application-to-Application Processes ->
    Application-to-Application Integration -> Configuration of Usage Type
    Process Integration (PI) -> Template-Based Basic Configuration.
    You can use either the Template-Based Basic Configuration to carry
    out the configuration steps OR you can do the configuration steps
    manually:
    Please see the following link regarding this:
    http://help.sap.
    com/saphelp_nw04s/helpdata/en/61/6e8c42c398173be10000000a155106/frameset.htm
    For the central SLD, further manual steps are required.
    For more information, see SAP Note 939592.
    If you want to use an Integration Server client other than 001
    further manual steps are required. For more information, see SAP Note
    940309.
    Thanks
    Gaurav Bhargava

  • Vendor not specified

    Hi ,
         while executing a standard Process  Termination_US  ( termination )  through Process HRASR_TEST_PROCESS(T-code ) i am getting  the message Vendor is not specified . When this process is triiggered through portal , process hangs on clicking button check and send .

    The incorrect text of the pop-up message is caused due  to the wrong text maintained in the message class 00 (message 001 ->No vendor specified).Kindly goto transaction SE91. Type the message class as 00 with the radio button Messages selected and press Change. Then maintain for message 001, the message short text as  
    &1&2&3&4&5&6&7&8.                                                                               
    Be sure to try this in a test system first

  • Vendor not intended when create SC using create limit item

    Hi All,
    This is a challenging issue for all of us...
    SRM : 5.0
    ECC : 6.0
    I am facing the problem when creating the Shopping cart..
    When i click on Centralized purchasing -- > Shop -- > Create Limit item
    and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
    It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created..
    If i try to create one more item and specify the Good/service as our custom field value  , for this item there are no error and
    no message saying Vendor not intended for Purchasing organization..
    Please help me in finding out the issue.So that will be greatful to you..
    Advanced thanks
    Points will be rewarded..
    Regards
    Raju

    Hi Teja,
    I agree with you answer..
    When i tryo to create SC using the Product which are repliacted from ECC to SRM.. I am able to create SC successfully. That means vendor is properly intended to the Porg and Pgrp right...
    When i click on Centralized purchasing -- > Shop -- > Create Limit item
    and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
    It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created and Product type is neither a Material nor service.. The product type field vale is blank....
    Please help me in finding out the issue.So that will be greatful to you..
    REgards
    Kumar

  • Idoc Status 51 - Vendor not defined in company code

    Hi All
    I'm having an error when performing intercompany stock transfer. The system creates an idoc but unable to post the subsequent document due to the error " VENDOR NOT DEFINED IN COMPANY CODE XXXX"- Status 51.  I have checked over and over ahain but everything looks ok. Could sme1 let me know what I could be missing please
    Thanks a lot
    Edited by: Joe Ujoh on Jul 22, 2008 5:27 PM

    Hi Joe,
    You said you checked everything again and again and is OK; to start with, does the vendor exist in CoCd - pl. check using T code XK03 and see if you have anything in Company Code data.

  • Qty  not updated in MMBE report

    Dear Experts,
    We have define one material (project material) type defined as Qty update and Value update, when i pass the MIGO value is updating but the qty is not updated in MMBE report, where as qty is showing in MB51.
    why the qty is not updated in MMBE for this particular material type?
    i am FI/CO consultant.

    Hi,
    This depends on the selection criteria on the initial screen of MMBE t-code, make sure your entries are right.
    Secondly, ensure special stock indicator is checked. Check the movement type...you will need to scoll to the left on the overview screen, in case you have posted the material to the blocked stock.
    Regards,
    Maheshwari

  • Vendor not intended for purch. org.Purchase Deportment

    Hi Gurus
    Whenever we are trying to create the SC with source of supply with one user we are receiving the error message as "Vendor XYZ not intended for purch. org. XYZ Purchasing Department ".
    Please suggest.
    Thanks in advance.
    Thanks & Regards
    Sada

    Dear,
    I like to suggest the below to check once (as i found on web):
    In SAP SRM 5.0 (SRM Server 5.5), the "shop with limit" functionality is a standard capability.
    There is really no special configuration required for "shop with limit" as opposed to the "describe requirement". As long as u specify the vendor (if known), acct. assignment (if known), the corresponding cart is created.
    Unfortunately, you have not provided the complete error on the Vendor, but I'm assuming it is: "Vendor not intended for purchasing organization". This is usually the case if the Vendor Organization does not have a purchasing organization assigned. Check the BUK attribute for the vendor org in PPOSV_BBP and also make sure the purchasing organization is assigned to the corresponding company code organization unit in PPOSA_BBP.
    Regards,
    Syed Hussain.

  • Lot not show in MMBE quality insspection

    Dear expert
    i make planing for halb material  against 04 origin and also active inspection 04 or lot will be generated against 101 movement type. Now lot will be show on QA32 but not shown in MMBE in Quality inspection its quantity show only unrestricted stock.
    i want to show this quantity in quality for MMBE
    Because quality inspector take decision
    Please guide me
    Regards
    Priya
    Edited by: sapqm01 on Aug 26, 2010 12:57 PM

    Dear Vishal
    Thanks a lot. Now i understand thanks again and again
    regards
    priya sharma

  • Batch is not captured in MMBE as Schd. for Delivery?

    Hi SD Experts
    Particular batch stock is not captured in MMBE as scheduled for delivery after creating the Outbound delivery.
    Kindly provide some inputs.
    Thanks/Karthik

    Hi
    Thanks for your inputs
    I have tried my best but nothing worked out.
    Development it is working fine and even production system for the same material other batches or working fine.
    Compared the batches but nothing wrong in it.
    Due to this issue batch stock is showing as available stock for other deliveries to pick.
    Planning to apply OSS notes.
    Thanks/Karthik

  • Batch not appearing in MMBE but determined in the DELIVERY

    Dear All,
    While creating delivery, batch got determined, but actually batch not shown in MMBE.
    When I checked in MSC3N, it shows that particular Batch, it has been created about 2 years back.
    But how system is taking this Batch when there is no stock and it is not shown in MMBE.
    Please explain.
    Regards,
    Mullairaja

    Hi Harry,
    Thanks for your suggestion.
    I will check and confirm you.
    Regards,
    Mullairaja

  • JVM Vendor not supported error in NWDS.

    I installed the NWDS 7.3 for customizing my portal 7.3 logon page. I am following an interesting blog for the same: Getting started with Netweaver 7.3 portal Part 2 - NWDS and Logon Page
    However I am yet to complete this task successfully due to a JVM vendor not supported error. I have a JAVA_HOME entry to the javaw.exe path. Also, i have vm entry of the same path in the NWDS shortcut- properties- target value. C:Program Files (x86)Javajdk1.7.0_02 in
    I chose program files (x86) for this installation bcos during my previous java error i read in my log that JVM 64 bit could not be run.
    Initially i use to get JVM error during startup itself bcos of which i was not able to get to the home page of developer studio. I solved that error now by installing right version and making necessary entries as mentioned above. Now i get a pop up stating that oracle vendor is not supported (it says that i should have either a Sun or SAP provided java). Is it really the problem? If so, can some 1 get me the link to download it.
    I am creating a new thread since the old ones posted by others on the same topic does not give me the solution.
    Thanks in advance

    Hi,
    I also come to this warning. I did a little research, and found solution that worked for me by solving source of problem, without need of trying different JDK versions.
    My current configuration:
    SAP NWDS:
         - v7.30 EHP1 (7.31) SP10 PAT0001 (8.31.100001.140103092401 SP10 PAT0001)
         - file: "nwds-extsoa-7.3-EHP1-SP10-PAT0001-win32.zip"
         - Download location: https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/nw/731/doc/auto_latest_distributions.html
    JDK:
         - v7 Update 51 - both x86 and x64 versions. As NWDS is x86 version, that platfotm is enought if you don't need native support for x64 applications.
         - Latest version download location: http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
         - Older versions download location: http://www.oracle.com/technetwork/java/javase/archive-139210.html
         - I'm not suggesting that you need to install last version. I tested it on this version and it worked for me, but I use NWDS only for few specific tasks. So I did't test all functions for JVM compatibility. But my solution should work for solving cause of vendor specific problem. Not other JVM problems. And installing newer Java may be source of other problems, like is every release. But with correct backup there shouldn't be a problem.
    Problem:
    Problem is in older code of initial JVM check, where are specified allowed vendors. Oracle is not included in configuration, so warning is shown. Module is located in plugins folder:
         "<SAP NWDS>\plugins\com.sap.ide.jvm.check_1.0.0.140103091951.jar"
    Version number (orange) can differs based on NWDS distribution. In jar file is configuration stored in file "config.xml". There is this part, that specifies allowed vendors:
    <supportedRuntimes shutdownIfNotMatches="false" warnIfNotMatches="true">
          <vendor name="SAP AG">
              <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
          </vendor>
          <vendor name="Sun Microsystems Inc.">
              <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
          </vendor>
      </supportedRuntimes
    Here you can see that only "SAP AG" and "Sun Microsystems Inc." from older Java releases are included. And that's the problem, as new versions are released by Oracle. So vendor differs and warning is here.
    Solution:
    Before we begin it's best to backup whole NWDS directory and also workspace(s)!
    1) Locate file with JVM checking module:
         "<SAP NWDS>\plugins\com.sap.ide.jvm.check_1.0.0.140103091951.jar"
        As mentioned before, version number can be different in your release.
    2) Create backup copy of current file. Call it for example "com.sap.ide.jvm.check_1.0.0.140103091951.jar.BAK".
    3) Copy original file to temporary location. I used "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951.jar"
    4) Extract files from JAR. JAR files are basically ZIP files. I used 7-zip program to extract source to folder based on file name:
    "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\".
    5) Locate and edit configuration file "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\config.xml". Add vendor node "Oracle Corporation" (part in green color). Just copy existing node and replace vendor name.
    <supportedRuntimes shutdownIfNotMatches="false" warnIfNotMatches="true">
        <vendor name="SAP AG">
            <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
        </vendor>
        <vendor name="Sun Microsystems Inc.">
            <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
        </vendor>
        <vendor name="Oracle Corporation">
            <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
        </vendor>
    </supportedRuntimes>
    6) Pack directory. Pack whole content of directory from step 5) back to ZIP format. Change extension to .JAR in your favorite compression program, or rename new file from ".zip" to ".jar" after compression is done. Now we have our new corrected file for checking JVM version in NWDS - "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\com.sap.ide.jvm.check_1.0.0.140103091951.jar".
    7) Replace original file. Copy file over original one:
    "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\com.sap.ide.jvm.check_1.0.0.140103091951.jar" -->
    "<SAP NWDS>\plugins\com.sap.ide.jvm.check_1.0.0.140103091951.jar". Overwrite if asked.
    8) Done.

  • CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

  • T code QA11, quantity can not be posted to blocked stock

    For Inspection lot with system status is   INSP RREC SPRQ, when user tries to perform QA 11 to post stock to blocked stock the system does not allow as "to blocked stock field" is greyed out and also can not chnage the storage location on that screen.
    I have checked the material already exists in the WH/storage location also inspection charachterstics are corrct not sure what else to check.please advise.

    Does not seem like authorisation restriction since user is able to process other QA11 for the same plant/WH and storage location. Does not seem like customisation either since all " Quantity to be posted "options and storage location are greyed out under inspection lot stock Tab
    After Accept atleast system should allow posting to "unrestricted stock " but thats not available either.
    For the same material/plant/WH, I am able to sucessfully post stock when system status is -REL  CALC SPRQ but in this case the status is -INSP RREC SPRQ, what does this signify.Please help

  • I have converted/copied my itunes oto mp3 format to play on my PC. unfortunatly I didi not specify a different folder fro the mp3's. I therefore have itunes side by side with my mp3's all in the same folder. How can I remove the mp3's into another folder.

    I have converted my itunes on my imac to mp3 format so i could play them on my pc. unfortunatly  i did not specify a seperate folder for the mp3's to be sent to once converted.
    i now have itunes and mp3's side by side in the itunes media folder. this has the effect of doubling my library.
    how can i get rid of the mp3's from this folder en mass, other than erasing them one by one, there are 7000!!!

    Click on 'Music' in the iTunes sidebar. Look to see whether you have a 'Kind' column:
    If you haven't, choose 'View Options' from the 'View' menu and check 'Kind':
    Now go to the Music list again and click on the label of the 'Kind' column. This will group all your AACs and MP3s together. Locate the MP3s: click on the top one. Hold the shift key and click on the bottom one to select them all. If you want to save them drag them to a folder on your Desktop. Then hit 'Delete'. IMPORTANT: when promted, choose to have them moved to the Trash, otherwise they will be removed from the list but kept in the actual library.

Maybe you are looking for

  • Any Way to Save a pdf User Manual?

    I seem to recall that in previous versions of FCS apps, including Motion, you had the Help option to open (usually in Preview) a pdf User Manual. From there, via the Print dialog, you could do a "Save as PDF", into the folder of your choice. I often

  • Tabloid duplex printing problem from CS4 (Acrobat and InDesign)

    I cannot print a two-page tabloid (landscape mode) pdf document properly from a MacBook Pro or a Mac Pro running 10.6.2 using Adobe Products (Acrobat 8 or 9, or InDesign CS3 or CS4) to an HP LJ5550DN. The printed version prints on both sides of the p

  • I can't find the yosemite driver for my epson r3000 printer.

    I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any.  In "Printers and Scanners" in System Pr

  • Configuration change management for SBO !?!?

    Hi friends, Is there any "Change Management" tool or feature which could help to keep track of the changes made in the SBO configuration ? I was wondering that if we could have all the configuration data in plain text, we could keep trak of the chang

  • Yahoo Calendars on iOS 8 - Events in GMT

    I think I have found an issue with using Yahoo Calendars on iOS. When I add an event from the Yahoo Calendar website, the event shows up on the iPhone/iPad with a 5 hour negative offset for me in the EST timezone. For instance, if I add an event for