Vendor number range issue in BUCF transaction

Hi,
We are implementing the SRM 5.0 with Extended Classic scenario. I my current SRM system is already connected with 3 SAP R/3 system and I am implementing and adding 4th SAP R/3 system.
I am having an issue to replicating the vendor master from 4th R/3 system to our SRM system due to wrong number ranges in BUCF transaction code.
Current Number Range in SRM systems are:-
01     0010000000            0014999999     10003009
AB     0001000000        0009999999                        X     --> (7 Digits)
My new vendor master from 4th R/3 system is:-
0080000001        to     0080029999    --> (8 Digits)
My new vendor master number range is overlapping with my internal number range 01. As we know that we cannot reduce the lower range of 01 from 0010000000 to 0000000001. Also I cannot increase the number AB higher value from 0009999999 to 0099999999.
Can you any one please suggest me to correct the number range?
Thanks,
Senthil

Hello Senthill,
The vendor replication to external number ranges works as follows:-
(1) Cross-Application Components SAP Business Partner > Business Partne
> Basic Settings > Number Ranges and Groupings > Define Number Ranges
Here you sould define an external number range which corresponds to
the R/3 numbers. You may want to have more than one external range
in order to replicate all vendors.
(2) Cross-Application Components > SAP Business Partner > Business Part
> Basic Settings > Number Ranges and Groupings > Define Groupings and
Assign Number Ranges
For each replication run, you can download the vendors which correspond
to the external number range / grouping which is marked as 'standard
external'.
So, you will have to replicate your vendors separately for each number
range:-
Select the correct grouping each time by marking 'Ext.Std Grping'
and then run BBPGETVD for the vendors to be assigned to this grouping.
As standard, the customized settings for the number ranges
would have to be changed for each run of BBPGETVD and BBP_VENDOR_SYNC.
If you run the update or synchronization in combination with a
BADI the intervals could be taken into account.
The BADI is BBP_TRANSDATA_PREP
The methods are:-
Method: PREPARE_REPLICATION_DATA (intitial download)
Method: PREPARE_UPDATE_DATA (update)
Import data is stored in CT_LFA1 should be copied to an
internal table. There the required intervals can be determined.
This BADI is not assigned in the IMG but can be seen through SE18.
I hope this information is helpful.
Kind Regards,
Edel.

Similar Messages

Vendor number range issue

Hi,
In testing server when i created a vendor it skipped number series sequence. Lastly vendor was created with xxxx50 but upon creation it created vendor with xxxx67, i have heard there is some problem with buffering settings in SNRO but when i look there i find it to be set as 5 then why system is skipping so numbers. Anyone can help me on it.

Hi,
Please ensure that none is using the system during the copy, this can generate this gaps
Also check note 175047:
In note 175047 you can find a summary about situations, where missing
document numbers (gaps) could occur. See also the referred notes at the
bottom of the note.
The possible and usual causes for the number range gaps are as follows-
   1. User exit USEREXIT_NUMBER_RANGE in program RV60AFZZ.
      Please check the user exit.
   2. Number buffering (which might not be applicable to your case)
      Please check transaction SNRO for object RV_BELEG to verify
      if buffering is switched on. Please refer to the attached
      note 62077, 23835 and 363901.
   3. Update termination
      This is the most likely cause of number range skipping.
      Please review trxn SM13 for update terminates during the run. If
      so, copy them in this message. Please also use trxn st22 to check
      whether shortdump occurred. If yes, upload the first 15 pages of
      the dump into this message.
BR,
Raquel

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

I have number range issue for fi posting.

hi gurus,
i have number range issue for fi posting (fb01,fb50).
problem in updating table glpca due to duplication of record.
INSERT GLPCA FROM TABLE T_GLPCA .
With Regards,
Shakthi Raj N.

error msg after generating document no and it is not getting updated in data base
error msg
"Express document "Update was terminated" received from author "ecciabap""
Client.......   750
User.....   ECCIABAP
Transaction..   FB01
Update key...   C83B07DE4DADF13CB4950017A4AB8015
Generated....   02.03.2009, 20:37:23
Completed....   02.03.2009, 20:37:23
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

Vendor Number Range relation with account group.

Dear All,
I have one more doubt. Kindly clarify.
I know that account group and vendor number range and linked with each other. Number range can be assigned to one or many account groups. Let's consider a case where 3 Account groups (assume X,Y & Z) have one common number range. When we create a vendor, in an account group (for example, X) vendor code assigned internally is 100000.
Subsequently if we create another vendor in the account group Y, will the vendor code assigned intenally be, "100001", considering intervals to be of 1 or any other number falling in the number range assigned to this account group?
Does there lie any rule or method which assign the code in this manner or any other...?
EnjoySAP,
Thanks

Hi,
When a vendor master record is created, a unique number identifying the master record is assigned. The number comes from the number range provided for the account group.
Internal number assignment
Here the SAP R/3 System automatically assigns a consecutive number from the number range defined, irrespective of any number of account groups attached to which the number range has been assigned.

Vendor number ranges

Dear All,
i guess there is sum buffering set in the system for vendor number ranges ,
coz wen i create new vendor it skips sum of the number and shows next number in vendor number range
how can i set buffering zero ,,as we do in material ,
thanks,

Could u plz guide me how to get the number range object for vendor?
coz i used,, the object name vendor , but it doesnt work ,
thanks

Missing Vendor Number Range

Dear Expert,
By mistake while uploading FI Vendor master to system we had given the Vendor Number in the template.
The vendor number range is maintained as internal.
All the vendor was updated and it is showing also.
But when in system we try to create new vendor it is showing account already exists.
We checked the number range the current Number is still zero.
Is there any program or any method that we can bring this current status sync with existing vendor master we had uploaded into the system.

Hi,
check T-code XKN1, tick "status", update the current number to the needed one.
Best regards, Christian

Xkn1 creation of vendor number range doubt

hi
In xkn1 vendor number range,
I want to insert the interval, as 02 10000 to 30000
when I try to save or insert , it is not saving,
A popup as "enter intervals without overlap "
if i try to change it to 2 or 20: its not accepting it, a message popups as existing number,
how to come ovr this problem,
before inserting number range, should we enter company code , please help me.
warm regards.

The reason you are getting that error message is that, that number interval is already used by another number range. Check the existing number ranges and choose an interval that is not used yet. Or you can assign an existing number range to the vendor group that you have created if that range satisfies your requirements.
Edited by: PaulKr on Mar 5, 2010 5:41 PM

Reset of vendor number range

Hi everyone!
Is there a way in which we can reset the vendor number range? We have already created vendors but some numbers were skipped. Is there a way in which we can re-use it?

no you cannot reuse the skipped numbers. Do not reset the number range.
You will certainly hit the situation that next number would be a number for which you already have a vendor, then SAP cannot save and not proceed further, until you are chaning the number in the range again.
But you can change the buffer setting, then SAP will not skip numbers in future.
execute SNUM, enter KREDITOR, click change and set buffer to 1

Number ranges in mobile sales transactions.

Hi friends,
Unlike ecommerce, interaction center which are always connected online to a backend CRM system, the mobile client applications can also work offline.
So, in situation where I have 10 Field sales executives carrying mob client appications when they create orders in their inidividual laptops, the sales order numbers are generated.
How do we maintain number ranges in this case. Because number ranges are assigned to transaction types and all the Field executives have the same transaction type for sales orders.. for example ZMOR(Z mobile order). Will there be overlapping of sales order numbers (for sure i think no..).
How is this done.
Regards

Hi,
to make it short:
For master and transactional data, where NO external number generation in Mobile is designed (BP, opportunities, etc) the numbers are generated in the moment when the data is imported from MSA to CRM; there is NO difference between these objects from MSA and the objects created in CRM directly e.g. both are using the same number ranges.
There are only few objects (like service orders/confirmations) where an external number generation is possible. In this case some settings on MSA (better MSY) need to be done, especially for each site a specific logical address needs to be defined. Based on this definition the numbers are already created on MSA/MSV when creating/saving the data there. After importing the data to CRM NO number generation happens there.
Important: All the possible number ranges defined in MSY need to be maintained in CRM as EXTERNAL number ranges.
Regards,
Wolfhard

Having Two GR/IR account based on Vendor Number Ranges.

Dears,
Requirement of our client is to maintain Two GR/IR accounts based on Vendor number Ranges. I explained, as per standard functionality of SAP we can not have 2 GR/IR accounts based on vendor number ranges since system is checking the valuation class of Material but we can have 2 GR/IR accounts based on the Materials.
Please suggest me if there is any possiblity of having the above scenario so that I can add more points.
Thanks,
Omprakash

Hi Shahin,
You can do this using,
Material master QM view : Set the control for inspection lot creation as each material document,batch, storage location.
Inspection plan: Use the dynamic modification at characteristics level.
DMR: Create a DMR(lets say every 5 deliveries, assuming PO delivered in 5 delieveries) and assign it to each and every characteristics which you want to skip.
Please let me know whether it helps.
WR,
Sanjeev

Gaps in vendor number range

Hi SAP Gurus,
I need your help in understanding the gaps in vendor number range,
I have created an internal number range for a vendor account group and created many vendor for the same.
However when I see the sequence of the vendors for that account group, I found gaps, can you please advise me why this gaps are generated by the system and where I can see the corresponding gap numbers in SAP.
Thanks,
Ramesh.

Hi,
Thanks for your quick reply,
Can you please advise me in which SAP table I can find all gaps whcih occured due to deletion.
Thanks,
Ramesh,.

How to find the Transactions using vendor number ranges

Hi All,
How can we find out the employee vendor transactional data ?
and what are the Tcodes used to find it?
Are there any finance transactions which allow vendor number?
Advance,
Thnks

Hello Gayatry,
1. Goto ST03. Select choose for analysis. Choose only one application server at a time in case you have mutiple application servers. Choose time period of your choice.
2. In the next screen from menu choose GOTOPROFILESUSER PROFILES. Here you will get the list on users who have worked on that application server.
3. Double click on the required user and you will get all the transactions he/she has executed.
4. In case you select TOTAL in step 1 and then follow the steps 2 and 3 you will only get the list of application server on which the user has worked and not the transaction details.
Regards.
Ruchit.

Number Range issues with sales orders in CRM and R/3

Hi,
We are currently using CRM4.0. I have sales orders created in R/3 and they are replicated into CRM. These sales orders can only be created in R/3. I have given them a number range of 0000000001 and 0005899999, however we have reached the number 0005899999 so we increased the internal number range for the sales orders in R/3 to 0009499999, however we forgot to update the number range for the corresponding sales transaction type in CRM so we are getting the following error in CRM:
+Enter a business transaction number between 0000000001 and 0005899999
Message no. CRM_ORDERADM_H532
Diagnosis
You have attempted to enter a transaction number which is not allowed for the transaction type.
Procedure
Enter a number between &1 and &2. Make sure that you issue a number which has not already been issued.+
We have now updated the CRM number range to match that in R/3 to 0000000001 and 0009499999 but we are still getting the error above on our existing sales orders in CRM. I thought that increasing this number range it will remove the error but when I open sales orders in CRM the error is still there.
Is there any way to remove this error message? Any tips or advice would be much appreciated.
Please note we've already checked the post Re: Number Range Problem and note 427289.
Kind Regards
JoJo

Hi Sirisha,
The solution depends on the exact issue you are facing.
The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
If this is the case, then you can follow the steps below:
1. Find the Message ID and Message No for the error message
2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
Let me know if this is not the issue you are facing.
Regards,
Nelson

Vendor Number Range Problem

Hi Friends ,
          I have done all settings for Supplier Registration Process. I am able to transfer the supplier from pre selection screen and all the relevant information is coming in supplier screen, when i am clicking on SAVE button, I am getting following error messages.
1. Number not in interval 0000100001 u2013 1999999999
2. Business partner 162 already exists
In supplier screen partner number shows 162 which is in between Internal Number range assignment while at the time of SAVE system comparing with External Number Range assignment why? When I am changing partner number 162 with External Number range Number for example 100009 then only I am able to create Bidder else it is getting error. Should I have to change Number range assignment or Am I missing any steps?.
         I have assigned following entries in Tx. BUCF in SRM.
01      0000000001     0000100000     170
AB     0000100001     1999999999     0       X (Ext)
MD    9000000000      9999999999    0       X (Ext)
Entries defined in SRM Server - Technical Basic Settings - Settings for Supplier Synchronization - Define Global Settings
Vendor Number Assignment Type u2013 Assign SAP-ERP Numbers Only
Abhijeet

Dear Nitesh,
What is the exact error message that you are getting?
Regards,
Naveen.

Vendor number range issue in BUCF transaction

Similar Messages

Maybe you are looking for