Vendor part number for non catalog item in shopping cart?

I have a requirement to get the vendor part number field in shopping cart basic data for non catalog item. This field is available for catalog items, would it be possible to make the same field available for non catalog items as well?

Hi Gummadi,
You can create custom fields in Shopping cart uisng a BADI and can populate the information.
BBP_CUF_BADI can be used to create customer fields.
Please get discuss with your ABAP fellow for the creation of customer field.
Award points for helpful answers.
Rgds,
Teja

Similar Messages

PO Partial confirmation Quantity not updated for non-catalog items in SRM

Hi Experts,
Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
Steps to Reproduce:
1) Create a purchase order.
2) Confirm some part of the quauntity and reject the balance part in Ariba.
3) Open the link in SRM and click Copy push button.
4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
Expected Result:
PO should update the changes done in Ariba.
Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as in the Catalog items partially confirmed POR is copied onto PO.
kindly give your valuable inputs to poceed furthur.
Regards,
Chandu

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

Account assignment check for non-direct material in shopping cart creation

Hello Guru's
i'm very new to SRM please help me
We require all non-direct material shopping carts to be ordered with a valid account assignment. Therefore we implemented BADi ZUB2MB_DP_PROD_CHK to suppress the u201COrder as Direct Materialu201D Button. This button allows any order to be placed without account assignment like a direct material.
We started ordering direct materials in SRM at go-live with a cost center, but when they were received, SAP considered them consumed due to the account assignment and did not place them into QA Inspection or assign a batch. We immediately, switched back to SAP for direct materials.
We need a solution that will require all non direct material shopping carts to have account assignments, while allowing direct materials to be ordered with or without account assignments. All while keeping the current checks in place regarding the mixing of account assignments, Z required for TBI catalogs, etc.
please tell me how to write the logic in the DOC_CHEK_BADI to check weather account assignment is made for non-direct material while creating a shopping cart.
thanks in advance....

Account Assignment notification, should be take care by standard SRM functionality itself..
Your using SRM 7.0 or 5.0 ??
Thanks!!
Bharath

SRM 7 - defaulting values for multiple line items on shopping cart

Hi,
We are using SRM 7 - Employee self service - Punch out catalogues and describe requirements.
Our scenario is this:
- User is responsible for creating shopping carts for numerous cost centres/other users
- Shopping cart will have multiple line items (but the cost centre/other user will be same for all line items)
- Is it possible to define in a shopping cart that all line items will have a specific value? E.g. all line items will be assigned to a specific cost centre?
I know about assigning dedault values in PPOMA_BBP - but our situation is where user does not want to use this default value this time, but another value
Any suggestions?
Thanks

Thanks Alex for quick reply
To confirm, did you use the BBP_DOC_CHECK_BADI (in conjunction with the BBP_ITEM_CHECK_BADI) to look at different cost centres on the multiple lines on the shopping cart?
Also - did you use the same BADI to give user opportunity to enter a default cost centre that is then automatically applied to all line items on the cart?
Thanks
Azam

Credit memo for non inventory item

Hi MM consulatnats,
My client need to know the best practices to handle teh credit memo for non inventory item ??
We have two options like FB65 in FI part where it wont update in PO history.
In MIRO also we can make credit memo w.r.to PO.
What they want to know is if FB65 is the correct way to do this to fully reverse the effect that the receipt and invoicing of the item had on the financial accounts.
What is the best pracise to adopt ??
Need your views
Thanks
A.Gururajan

Hi,
You can use MIRO for credit Memo with ref to PO.
This will update both PO history as well as your FI accounts/Vendor Balance.
Thanks & Regards,

Supplier Note gets copied from Catalog Item to Non-Catalog Item

Hi All,
The basic issue is that when we create a mixed shopping cart, cart with Catalog and Non-Catalog Items (Made using Describe Requirement link), the Supplier Note (in the Documents and Attachments part ) from the Catalog Item gets copied to the Non-Catalog Item directly when we create the Non-Catalog Item.
We face the issue only when the first Item is a Catalog Item. ...
There are no custom developments for the Supplier Note and we do not modify it directly in any other way. Any Ideas .. ?
Thanks and Best Regards,
Sagar Ogale

Hi Bharath,
The issue is that for the Non-catalog ( Item created using Describe Requirement ) in SRM 5.0, the supplier note field is getting populated by default. This is the issue.
The Supplier's Note should remain blank. But, its not... This is the issue. Do you have any ideas what may be causing the issue..?
Thanks and Best Regards,
Sagar Ogale

IProcurement - "mass upload" for non-catalog request

I want to find a way to do a "mass upload" when creating a non-catalog request.
Some back ground; I am not A DBA or a software developer; I am an engineering manager. I work for a large company and have responsibilities for creating Purchase Requisitions. I work from vendor quotes that contain many lines items, and always do non-catalog request because I often get special pricing or simply have non-catalog items. There are several fields on the requisition web page that need to be populated and it's quite cumbersome and time consuming to copy and paste 6 different data fields for 50+ line items. Since these are fields on a web page that correlate to some back end database there must be a way to populate them more quickly and easily, with an upload template, or via an API.
It is very, very difficult to find the proper internal resources to help me address this problem, and when I do find the right people I'm pretty sure I'll be told "it can't be done" I don't believe it can't be done. It may be difficult, it may require some work, it may require some development efforts, but from a purely technical point of view, populating multiple data fields with minimal user input is certainly doable. I want to be armed with solutions when I finally find the right people at my company. So, anybody out there figure this one out already? Once I do I'll be glad to share but hoping it's a know and fixed issue.
Thanks!!

You are looking for the requisitions Open Interface.
Get this PDF from the documentation for release 11* and read chapter 6, it will guide you through the import process.
*For some reason this document is not available for newer releases (11i, 12), so you would rely on Metalink to look for notes.

What is the correct part number for dvi to vga adapter for macbook pro model A1260

Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
My adapter has reached the end of useful life.
Thanks!

You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
The DVI connector connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

MIGO Print label WEE1 for non stock items from GR for PO

Hi,
I added logic to print new label into printing program MZ07DETI which is printing labels for stock items. My label is for non stock items. The problem is that for non stock items printing process is not triggered. I created PO with Account Assign. Category F, P or K no material number and no storage location. For this type of PO no print possible during GR posting. Is any set up available in IMG to make it work. I appreciate any response.

Hi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh

The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where can I get new one and what is the part number for it ?

The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where can I get new one and what is the part number for it ?

You can find them at vendors like ifixit and instructions to install.
http://www.ifixit.com/Mac-Parts/MacBook-Air-13%22-Mid-2011

HP Docking Station EN488AA - part number for power adapter

Hi,
I have a HP Compaq nx8220 notebook, with a HP Docking Station (EN488AA).
Unfortunately I have lost the power supply for the docking station.
I still have the power supply for the notebook itself (393955-001) but it does not plug in to the docking station. It is the correct voltage but only 90W instead of 120W, and the connector is the wrong size.
I've been looking online for the part number for the correct replacement power supply for the dock, but became very confused when I found sites advertising the same replacement part for both the nx8220 and the EN488AA when clearly they are different because the plugs don't match. None specify the plug size so I don't know which is which.
Can anyone help me identify the correct replacement part? Or better still, is there a plug adapter available so I can use my existing power supply for the dock too?
Attached are two photos - the plug from the power adapter next to the inlet of the notebook (fits) and the dock (doesn't fit).
Thanks,
EddieD97
This question was solved.
View Solution.

The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
In the picture observe the component in left hand bottom corner.
http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
I would say, take the adaptor to store and get one.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Assembly part number for individual PXI chassis slot blockers?

I need the individual assembly part numbers (not the catalog or packeaged kit number) for the standard 3U PXI chassis slot blockers. The ones we have accumulated are stamped with the part numbers below but I need to know if this is the part number for the "assembly" with fasteners, or just aluminum plate.
1 slot   185365C-01
2 slot   185365C-02
4 slot   185365C-04
also is there a there 3 slot available (perhaps a -03)?
Thanks,
Darrow

Hi Darrow,
The part numbers listed above are indeed for the plates. Those three sizes are the only ones available through National Instruments; unfortunately there is no three-slot plate.
Best regards,
Tim

Vendor part number to Sun part number mapping

I am getting vendor part number in prtfru and showfru outputs of Sun Fire V240 server. I am not getting Sun part number in those outputs. So is there any way to determine sun part no. from vendor part no.
Thanks in advance.
Edited by: midhu on Oct 10, 2012 11:37 AM

The part is memory and this is a Sun Fire v240 server. I have checked prtfru outputs of several v240 machines but i was not able to get the sun part no. for memory in any of these machines. Find the below output from prtfru -x.
<Location name="B0?Label=B0">
<Fru name="bank">
<Location name="D0?Label=D0">
<Container name="mem-module">
<ContainerData>
<Segment name="SP">
<DIMM_Capacity value="1 GB"/>
<SPD_R>
<SPD_Bytes_Written_SPDMemory value="80"/>
<SPD_TotBytes_SPDMemory value="08"/>
<SPD_Fundamental_Memory_Type value="SDRAM DDR"/>
<SPD_Row_Address_Bits value="0D"/>
<SPD_Column_Address_Bits value="0B"/>
<SPD_No_Banks_Assembly value="02"/>
<SPD_Module_Data_Width value="0048"/>
<SPD_Mod_Voltage_Interface value="04"/>
<SPD_Cycle_Time value="60"/>
<SPD_Access_Time value="70"/>
<SPD_DIMM_Config_Type value="ECC"/>
<SPD_Type_Specific value="820404010E040C010226C1757000004830482A807575454500000000003C4830285000000000000000000000000000000000"/>
<SPD_Data_Revision_Code value="00"/>
<Checksum_8 value="49"/>
<Vendor_Name value="007F (unrecognized value)
"/>
<SPD_Man_Loc value="69"/>
<SPD_Manufacturer_Part_No value="72D128320GBR6C "/>
<SPD_Module_Rev_Code value="140F"/>
<SPD_Manufacture_Year value="2007"/>
<SPD_Manufacture_Week value="66"/>
<SPD_Assembly_Serial_No value="01069B22"/>
<SPD_Man_Specific value="5032000000000000000000000000000000000000000000000000000000"/>
</SPD_R>
</Segment>
</ContainerData>
</Container> 
</Location> 
<Location name="B0?Label=B0">
<Fru name="bank">
<Location name="D0?Label=D0">
<Container name="mem-module">
<ContainerData>
<Segment name="SP">
<DIMM_Capacity value="1 GB"/>
<SPD_R>
<SPD_Bytes_Written_SPDMemory value="80"/>
<SPD_TotBytes_SPDMemory value="08"/>
<SPD_Fundamental_Memory_Type value="SDRAM DDR"/>
<SPD_Row_Address_Bits value="0D"/>
<SPD_Column_Address_Bits value="0B"/>
<SPD_No_Banks_Assembly value="02"/>
<SPD_Module_Data_Width value="0048"/>
<SPD_Mod_Voltage_Interface value="04"/>
<SPD_Cycle_Time value="70"/>
<SPD_Access_Time value="75"/>
<SPD_DIMM_Config_Type value="ECC"/>
<SPD_Type_Specific value="820404010E040C010226C075750000503C502D80909050500000000000414B30327500000000000000000000000000000000"/>
<SPD_Data_Revision_Code value="00"/>
<Checksum_8 value="04"/>
<Vendor_Name value="Infineon (formerly Siemens)"/>
<SPD_Man_Loc value="86"/>
<SPD_Manufacturer_Part_No value="72D128320GBR7B "/>
<SPD_Module_Rev_Code value="038B"/>
<SPD_Manufacture_Year value="2003"/>
<SPD_Manufacture_Week value="66"/>
<SPD_Assembly_Serial_No value="038F7415"/>
<SPD_Man_Specific value="0000000000000000000000000000000000000000000000000000000000"/>
</SPD_R>
</Segment>
</ContainerData>
</Container> 
</Location>

Vendor Part number on Invoice

hi All,
Is there any possibility to check the vendor part number while posting the invoice? I per my knowledge we maintain this vendor partnumber in info record. And while creating the PO we can check it in material data.
My question is is there any setting to check the vendor part number while doing miro? Is this setting is dcoument specific? & where in SPRO we have to do it?
Amit

Hi Amit,
In your case if you use MPN material PO will reflect the Vendor Part No.
Ang in stock there will master material (which is your part no)
So no need to check againin MIRO for part no.
Hope this will solve your problem
Thanka and regards
Gitesh

Vendor Part Number not visible..

Hello friends,
i have to make vendor part number visible also in the basic data frame.. I know this field will be appearing only when the cart create from catalog.. But now we need to make use of this field always.. So make this field appear always i implemented BBP_UI_CONTROL_BADI badi.. But i am trying find the IV_FIELDNAME value of this field but i could not .. Please help me out to find the IV_FIELDNAME value or if you know please..
Regards,
John.

I donot have your system details .
I feel that you need to make changes in BADI as
suggested in note Note 974236 - Shopping Cart - Field control
regards,nishant
please reward suitably

Vendor part number for non catalog item in shopping cart?

Similar Messages

Maybe you are looking for