Vendor Part Number not visible..

Hello friends,
i have to make vendor part number visible also in the basic data frame.. I know this field will be appearing only when the cart create from catalog.. But now we need to make use of this field always.. So make this field appear always i implemented BBP_UI_CONTROL_BADI badi.. But i am trying find the IV_FIELDNAME value of this field but i could not .. Please help me out to find the IV_FIELDNAME value or if you know please..
Regards,
John.

I donot have your system details .
I feel that you need to make changes in BADI as
suggested in note Note 974236 - Shopping Cart - Field control
regards,nishant
please reward suitably

Similar Messages

Vendor part number to Sun part number mapping

I am getting vendor part number in prtfru and showfru outputs of Sun Fire V240 server. I am not getting Sun part number in those outputs. So is there any way to determine sun part no. from vendor part no.
Thanks in advance.
Edited by: midhu on Oct 10, 2012 11:37 AM

The part is memory and this is a Sun Fire v240 server. I have checked prtfru outputs of several v240 machines but i was not able to get the sun part no. for memory in any of these machines. Find the below output from prtfru -x.
<Location name="B0?Label=B0">
<Fru name="bank">
<Location name="D0?Label=D0">
<Container name="mem-module">
<ContainerData>
<Segment name="SP">
<DIMM_Capacity value="1 GB"/>
<SPD_R>
<SPD_Bytes_Written_SPDMemory value="80"/>
<SPD_TotBytes_SPDMemory value="08"/>
<SPD_Fundamental_Memory_Type value="SDRAM DDR"/>
<SPD_Row_Address_Bits value="0D"/>
<SPD_Column_Address_Bits value="0B"/>
<SPD_No_Banks_Assembly value="02"/>
<SPD_Module_Data_Width value="0048"/>
<SPD_Mod_Voltage_Interface value="04"/>
<SPD_Cycle_Time value="60"/>
<SPD_Access_Time value="70"/>
<SPD_DIMM_Config_Type value="ECC"/>
<SPD_Type_Specific value="820404010E040C010226C1757000004830482A807575454500000000003C4830285000000000000000000000000000000000"/>
<SPD_Data_Revision_Code value="00"/>
<Checksum_8 value="49"/>
<Vendor_Name value="007F (unrecognized value)
"/>
<SPD_Man_Loc value="69"/>
<SPD_Manufacturer_Part_No value="72D128320GBR6C "/>
<SPD_Module_Rev_Code value="140F"/>
<SPD_Manufacture_Year value="2007"/>
<SPD_Manufacture_Week value="66"/>
<SPD_Assembly_Serial_No value="01069B22"/>
<SPD_Man_Specific value="5032000000000000000000000000000000000000000000000000000000"/>
</SPD_R>
</Segment>
</ContainerData>
</Container> 
</Location> 
<Location name="B0?Label=B0">
<Fru name="bank">
<Location name="D0?Label=D0">
<Container name="mem-module">
<ContainerData>
<Segment name="SP">
<DIMM_Capacity value="1 GB"/>
<SPD_R>
<SPD_Bytes_Written_SPDMemory value="80"/>
<SPD_TotBytes_SPDMemory value="08"/>
<SPD_Fundamental_Memory_Type value="SDRAM DDR"/>
<SPD_Row_Address_Bits value="0D"/>
<SPD_Column_Address_Bits value="0B"/>
<SPD_No_Banks_Assembly value="02"/>
<SPD_Module_Data_Width value="0048"/>
<SPD_Mod_Voltage_Interface value="04"/>
<SPD_Cycle_Time value="70"/>
<SPD_Access_Time value="75"/>
<SPD_DIMM_Config_Type value="ECC"/>
<SPD_Type_Specific value="820404010E040C010226C075750000503C502D80909050500000000000414B30327500000000000000000000000000000000"/>
<SPD_Data_Revision_Code value="00"/>
<Checksum_8 value="04"/>
<Vendor_Name value="Infineon (formerly Siemens)"/>
<SPD_Man_Loc value="86"/>
<SPD_Manufacturer_Part_No value="72D128320GBR7B "/>
<SPD_Module_Rev_Code value="038B"/>
<SPD_Manufacture_Year value="2003"/>
<SPD_Manufacture_Week value="66"/>
<SPD_Assembly_Serial_No value="038F7415"/>
<SPD_Man_Specific value="0000000000000000000000000000000000000000000000000000000000"/>
</SPD_R>
</Segment>
</ContainerData>
</Container> 
</Location>

Vendor part number for non catalog item in shopping cart?

I have a requirement to get the vendor part number field in shopping cart basic data for non catalog item. This field is available for catalog items, would it be possible to make the same field available for non catalog items as well?

Hi Gummadi,
You can create custom fields in Shopping cart uisng a BADI and can populate the information.
BBP_CUF_BADI can be used to create customer fields.
Please get discuss with your ABAP fellow for the creation of customer field.
Award points for helpful answers.
Rgds,
Teja

Supplier Part number not transferred to R/3

Hello
The supplier catalog when used for a purchase order is not bringing up the supplier part number. The Supplier Part Number not transferring to the back-end .
Can anybody help me please?
Best Regards.
Jayawant

Hi
The field name is either MFRPN or what ? check whether the field is having any data, by holding a shopping cart by ITS and then doing the debugging in SRM GUI itself.
Is that field value is available on the SRM side, once the user is shopping from Catalog in ITS side. Please confirm the same by debuuging in ITS inside the
BBP_DOC_CHANGE_BADI ( inside The custom Implementation you have created in your system)
and incase its available, you need to pass the data coorectly by mapping / transfer the same by transferring it to R/3 by implementing the BADI - BBP_CREATE_PO_BACK.
Let me know your views as well.
Hope this will help.
Pls reward suitable points.
Regards
- Atul

Vendor part number Information

Dear Gurus,
How to find vendor part number information in sap? it's there any table or standard report?
Thanks and Regards,
Deethya.B

Hi,
Vendor info record will have vendor part number.
Try Tcode ME1L or ME1M. This will help.
Regards,

Vendor Part number on Invoice

hi All,
Is there any possibility to check the vendor part number while posting the invoice? I per my knowledge we maintain this vendor partnumber in info record. And while creating the PO we can check it in material data.
My question is is there any setting to check the vendor part number while doing miro? Is this setting is dcoument specific? & where in SPRO we have to do it?
Amit

Hi Amit,
In your case if you use MPN material PO will reflect the Vendor Part No.
Ang in stock there will master material (which is your part no)
So no need to check againin MIRO for part no.
Hope this will solve your problem
Thanka and regards
Gitesh

Line items in vendor code is not visible

Hello SAP Gurus,
My problem is related to advance payment to vendor,in FK10N (vendor line item display) line items for particular vendor is not visible.The actual problem which is coming is like for Fiscal year 2011 the vendor line items data is not being displayed but the system message is "29 item displayed" but in the screen layout there is no display list.System message number is MSITEM024.
It is not happening for single vendor,it happens for entire vendor list.
with regards
Rajiv

Hi ,
Please check whether it is due to missing authorizations .
Kindly check the auhtorization group that you have put in the vendor master .
After executing the FK10N execute the transaction SU53 there you can find the missing authorizations .
Regards ,
Dewang

Web Part is not visible in Web Part gallary

Hi,
I have developed a project in sharepoint having two web parts inside it.
Initially, when there was only one web part in my project it was working fine. But suddenly when i added a new web part, it is not showing me web parts in a gallary. Event it is not available in web part list under Web Designer Gallaries.
I tried with old .wsp to deployed, but still the same problem.
On my development machine it is working with two web parts very good. but when i try to deploy that wsp on production site, it is not showing me anything in web part gallary while it was when i was working with one web part only in my project.
Please, direct me where i am doing wrong, any possibilities?
I did workarounds as
1. Check for the custom webpart feature folder under 14\TEMPLATE\FEATURES ----- Yes it exists there
2. If the feature Scope is Site
3. The webpart dll is deployed to GAC with Stsadm command
4. No web part(My Custom) found here Site Action > Site Settings > Galleries > Web Parts

in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
please tell me what could be another workaround.

Split number not visible in CAT2

Hi,
I am planning resources for an activty through workforce planning. I have two persons assigned to a workcenter.In CJ20N activity screen, personal assignment tab, I am assigning these two persons. Here I could able to see split numbers against these two persons. Then I do confirm these activities through CAT2, here am able to see split numbers in work list.
When I add these two persons to two more activities, in CJ20N I am able to see the split numbers. However in CAT2, for one of the activities(same person) I can see split number but for another activity the split number is appearing as '0', though split number '1, is visible in CJ20N.
when does the system show split number in CAT2?
Regards,
Laxminarsimha

Hi, I have had a similar problem with split number. What I discovered today is that it is depending on the way you enter the time records in CAT2 wether splitnumber is filled or left to 0 (zero).
When you copy a record from the worklist it will include the correct splitnumber, however if you manually key in the network and activity your split number will be zero. I do not yet know what to do about it, start working on that next week.
Best regards, Paul
PS don't need points, but a drink would be nice:-)

Public parts not visible across SCs

Hello,
in one product we have two software components: one for COMMON functionality and another for our SERVICE. In the COMMON SC we defined our exception classes and made them available as public parts. All steps until approval have been made and the new version of COMMON was imported for development for the SERVICE SC.
Unfortunately, we are not able to reference the public part for the exception classes in the SC "SERVICE". Any idea why the public parts are not visible accross the software components?
Regards,
Volker

Renjith,
I had similar problem and its fixed now. What you need to do is..
If you are adding an SC from Track A to Track B, then
1. Choose track B in CMS
2. Click on ¡§Landscape Configurator¡¨
3. Add the SC of track A into ¡§Required Software Components¡¨
4. In Track Data tab, select the SC in ¡§Software Components for Development¡¨ area.
5. Click ¡§View/Edit XML content..¡¨
6. Add the 2 lines in between ***
**<used-compartment>vendorname_TrackA_1</used-compartment>**
</dependencies>
<build-variants>
<build-variant name="default" required-for-activation="yes">
<variant-mappings>
<variant-mapping used-compartment="sap.com_SAP_JTECHS_1" used-variant-name="default"/>
<variant-mapping used-compartment="sap.com_SAP-JEE_1" used-variant-name="default"/>
<variant-mapping used-compartment="sap.com_SAP_BUILDT_1" used-variant-name="default"/>
**<variant-mapping used-compartment=" vendorname_TrackA_1" used-variant-name="default"/>**
</variant-mappings>
</build-variant>
</build-variants>
7. Click on ¡§Back¡¨
8. Save the track B.
9. Click on ¡§Transport Studio¡¨
10. Import each SC (there should be 4 listed. 3 from sap.com and 1 from track A) one at a time. First import sap.com¡¦s SCs.
Thanks,
Kiran

Vendor Article Number in report format

Hey,
I am looking for Report in SAP MM which will give me Vendor Article or Vendor Part number. This information is in Purchasing Info Record but when i am using T-code ME1M for PIR report this field is not comming. If you know any other report or by any other way i can get this information with reference to article and Vendor that will be a great help.
Thanks

I just checked ME1M and I'm able to see Vendor Material number there in the selection criteria (IDNLF).

Validation of vendor material number in IDOC_INPUT_INVOIC_MRM

Hi folks,
Scenario: Inbound EDI vendor invoices received as IDOCs.
I'm using Logistics Invoice Verification process code INVL to receive and post vendor invoices on to the ERP2004 release of R/3.
I have purchasing info records setup with the vendor material number.
When I process an inbound vendor invoice, I can put in a customer material number i.e. a material number existing in material master in E1EDP19-IDTNR with qualifier E1EDP19-QUALF = 001. When I do this, R/3 checks that the material number is valid and refuses to post an invoice if the material number is invalid - this is good.
This means that the EDI program parameters with the 'Check Material Number' enabled is working as expected.
Now when I only have a vendor material number i.e. E1EDP19-QUALF = 002 an E1EDP19-IDTNR = vendor part number, R/3 posts the invoice even if the vendor part number is invalid - IDOC_INPUT_INVOIC_MRM does not seem to be validating the vendor part number. The document posts whether I use a valid vendor part number or an invalid one - what am I missing?
Satish

I can answer by words of Axel Angeli - top level SAP R/3 consultant and R/3 cross-application development coach, the author of classic book "SAP R/3 Guide to EDI, ALE and Interfaces":
"SAP R/3 delivers a serious of predefined EDI programs. Many project administrators see them as standards which should not be manipulated or modified. The truth is, that these IDoc processing functions are recommendations and example routines, which can be replaced by own routines in customizing."
and
"SAP R/3 is delivered with a series of predefined IDoc types and corresponding handler function modules.
Some of the handler programs have been designed with user-exits where a developer can implement some data post-processing or add additional information to an IDoc.
You must always see those programs as examples for IDoc handling. If the programs already do what you want, it is just fine. But you should never stick to those programs too long, if you need different data to be sent."
So now you can feel free to customize
Regards,
Maxim.

Vendor Product Number field

Can anyone please help us finding the field " Vendor Product Number". We have the information that this is a standard field on the shopping cart and is part of the standard content and This field is also available on Catalog Purchase Orders
Please help us recognizing the appropriate field tech name from the shopping cart extractor.
Hints are appreciated

Hi Masa,
Appreciate your prompt response. My issue is not Vendor Part Number. We are using Manufacturer Part Number field in our SRM-MDM catalogs. OCI is transferring the data in this field to SRM SC but it is not displaying in Item Data tab in SC. I can see the Manufacturer Part Number value transferred from catalog in Tcode BBP_PD. As per your earlier reply, I added field MANU_PROD (Manufacturer Part Number) in Customer Meta Data for Item fields in Personalization is SPRO. After adding this field here, it should be displayed in SRM SC Item Data tab but it is not displaying there.
We are not facing any problem with field Supplier PArt Number and iit is displaying correctly in the SRM SC.
Thanks

Check for Vendor PAN Number

Hi,
I want to make a check in vendor code creation. If vendor PAN Number not maintained then system will give an error message. Who I can make this check. Please provide me suggestion.
Thanks & Regards,
Hemant Maurya

Hi,
In OBD3 - vendor account groups , select the group your vendor belongs to and go to "general data- control - Tax code1/2
and make the field required. You can use either tax code 1 or 2
Else you can enter the PAN number in Tax number field in the vendor master. For this you need to make the field "Tax office responsible" mandatory.
But the problem is you have to create the tax authority as a vendor and enter that vendor id in the "tax office" field and enter the PAN number in "Tax number" field.
Hope this helps
Anil

Slice battery craziness-What part number IS it???

Last September we purchased 5 slice batteries for our X230 systems. One of them went bad about a month and a half ago, and I opened a warranty replacement ticket with Lenovo but they can't find a replacement battery to ship me (it's been out of stock for about 6 weeks now). They shipped out an incorrect battery at first, and I am getting the run around with various warranty, tech support, shipping, and status departments (I've been transfered to them all, have to explain my situation over and over again, only to get more confusion each time).
The battery I have has TWO part numbers printed on it, but they can't seem to ever cross reference these part numbers with the battery. The place we ordered these batteries from (CDW) have a Manufacturing Part number which is a completely different part number and which is NOT printed on the battery itself anywhere. Then, I just got off the phone with another person at Lenovo who gave me a slightly different part number, and then another part number (5 so far). How can there be so many different part numbers for the same battery and how can Lenovo not be able to cross reference them?
On the battery itself, I have two part numbers (again, why two???)
FRU P/N: 42T4967
ASM P/N: 42T4904
Then, there is a manufacturer part number (not listed on the battery anywhere) 0A36280
Then there is a fourth part number they gave me which is 42T4903
Then they gave me another part number of 45N1035
How can this be so complicated and why so many part numbers?

jbobst,
Given the time elapsed since purchase, this would generally need to be addressed through service. Service will deal exclusively with FRU or field replacement units.
During product life, we may introduce newer versions of a component or we may have an alternate supplier which can have a different FRU number but be functionally interchangable. When newer parts are released, generally the older FRU subs to the newer one so if you order the older number on a product, if we are out of stock on that, the newer one can be sent instead. Forward substitution.
I'll agree that this can be confusing and we try to make this seamless for the customer as much as possible.
Let me look into this overnight and see what we can do to locate stock. I'll work with bgriffin on what we can do to accelerate this for you.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Vendor Part Number not visible..

Similar Messages

Maybe you are looking for