Vendor part number to Sun part number mapping

I am getting vendor part number in prtfru and showfru outputs of Sun Fire V240 server. I am not getting Sun part number in those outputs. So is there any way to determine sun part no. from vendor part no.
Thanks in advance.
Edited by: midhu on Oct 10, 2012 11:37 AM

The part is memory and this is a Sun Fire v240 server. I have checked prtfru outputs of several v240 machines but i was not able to get the sun part no. for memory in any of these machines. Find the below output from prtfru -x.
<Location name="B0?Label=B0">
<Fru name="bank">
<Location name="D0?Label=D0">
<Container name="mem-module">
<ContainerData>
<Segment name="SP">
<DIMM_Capacity value="1 GB"/>
<SPD_R>
<SPD_Bytes_Written_SPDMemory value="80"/>
<SPD_TotBytes_SPDMemory value="08"/>
<SPD_Fundamental_Memory_Type value="SDRAM DDR"/>
<SPD_Row_Address_Bits value="0D"/>
<SPD_Column_Address_Bits value="0B"/>
<SPD_No_Banks_Assembly value="02"/>
<SPD_Module_Data_Width value="0048"/>
<SPD_Mod_Voltage_Interface value="04"/>
<SPD_Cycle_Time value="60"/>
<SPD_Access_Time value="70"/>
<SPD_DIMM_Config_Type value="ECC"/>
<SPD_Type_Specific value="820404010E040C010226C1757000004830482A807575454500000000003C4830285000000000000000000000000000000000"/>
<SPD_Data_Revision_Code value="00"/>
<Checksum_8 value="49"/>
<Vendor_Name value="007F (unrecognized value)
"/>
<SPD_Man_Loc value="69"/>
<SPD_Manufacturer_Part_No value="72D128320GBR6C "/>
<SPD_Module_Rev_Code value="140F"/>
<SPD_Manufacture_Year value="2007"/>
<SPD_Manufacture_Week value="66"/>
<SPD_Assembly_Serial_No value="01069B22"/>
<SPD_Man_Specific value="5032000000000000000000000000000000000000000000000000000000"/>
</SPD_R>
</Segment>
</ContainerData>
</Container> <!-- mem-module -->
</Location> <!-- D0?Label=D0 -->
<Location name="B0?Label=B0">
<Fru name="bank">
<Location name="D0?Label=D0">
<Container name="mem-module">
<ContainerData>
<Segment name="SP">
<DIMM_Capacity value="1 GB"/>
<SPD_R>
<SPD_Bytes_Written_SPDMemory value="80"/>
<SPD_TotBytes_SPDMemory value="08"/>
<SPD_Fundamental_Memory_Type value="SDRAM DDR"/>
<SPD_Row_Address_Bits value="0D"/>
<SPD_Column_Address_Bits value="0B"/>
<SPD_No_Banks_Assembly value="02"/>
<SPD_Module_Data_Width value="0048"/>
<SPD_Mod_Voltage_Interface value="04"/>
<SPD_Cycle_Time value="70"/>
<SPD_Access_Time value="75"/>
<SPD_DIMM_Config_Type value="ECC"/>
<SPD_Type_Specific value="820404010E040C010226C075750000503C502D80909050500000000000414B30327500000000000000000000000000000000"/>
<SPD_Data_Revision_Code value="00"/>
<Checksum_8 value="04"/>
<Vendor_Name value="Infineon (formerly Siemens)"/>
<SPD_Man_Loc value="86"/>
<SPD_Manufacturer_Part_No value="72D128320GBR7B "/>
<SPD_Module_Rev_Code value="038B"/>
<SPD_Manufacture_Year value="2003"/>
<SPD_Manufacture_Week value="66"/>
<SPD_Assembly_Serial_No value="038F7415"/>
<SPD_Man_Specific value="0000000000000000000000000000000000000000000000000000000000"/>
</SPD_R>
</Segment>
</ContainerData>
</Container> <!-- mem-module -->
</Location> <!-- D0?Label=D0 -->

Similar Messages

  • Report to find a material by a mfr part number and old material number

    Hi,
    Is there any standard report to find a material by a mfr part number and old material number ?
    For the moment, we are using MM03 to search articles by these selection criterion.
    Thanks,
    Julien Girard

    Hi
    As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
    Use Txn SQVI, enter the Quick view field say- ZMNFR and click the  create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter  MARA  for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only.  Click the tick mark , you will go to the next screen,
    You will notice Quick viewer Intial screen
    Open the node general material data
    Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
    Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
    Please ensure that you are maintaining both the details in material master basic data1 and purchasing  view if you wish to get  out output
    Best regards
    SAM
    Edited by: samuel mendis on Apr 8, 2009 6:52 AM

  • T400 case number and replacement part?

    I have a clients T400 that has come out of warranty. His 160GB HD died. I called Lenovo first to make sure the machine was out of warranty, the tech advise me that is way and gave me the HD FRU number and the phone number to call to get a replacement.
    My colleague called IBM and gave them the part number, they said the FRU doesn't exsist and got us the correct part number but said unless we had a case number from Lenovo the drive would be sold AS-IS. So if we bought it and for someone reason it didn't work they would not warranty or exchange the drive.
    So my colleague called Lenovo back who said "We don't give case numbers out for machines out of warranty". It seems that IBM thinks differently. Lenovo also said there some way of creating a case on their website which will send me an email with the correct replacement part number...do you think I could find what they are talking about??? NO!
    Has anyone had to deal this mayhem? It's like the left hand doesn't know what the right hand is doing....Plus it makes not sense to not properly help people who have OOW machines that are still fairly new.
    I have thought of maybe getting the one of the big bosses at IBM on the phone to fight it out with the boss at Lenovo!
    Andrew
    Xbase Technologies Corp.

    hey xbasetech,
    could you pm to me the following and i will see what i can do for you :
    Name:
    Country:
    Mobile:
    Email:
    MTM [machine type model]:
    (To locate MTM - http://support.lenovo.com/en_US/FindProductNumber.page#find)
    S/N:
    Date of Purchase:
    Case/Order Number : (if any)
    Screenshot of Error(if applicable) : (upload it to a hosting site and paste the link here)
    Location of unit : Home / Repair Center (delete where appropriate)
    Description of issue :
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Does a cellular-enabled iPad (4th gen) serve as a "SMS-capable phone number" for 2-part verification?

    Can I use my 4th gen iPad (WiFi+Cell) to supply a "SMS-capable phone number" for 2-part verification?

    No.  iPad does not SMS with or without Cellular.  There are 3rd party apps you can get that will, but they will assign a number to use.

  • Material Part number or Manufacturer Part number

    Hi Gurus,
    1. Is there any difference between Material Part number and Manufacturer Part number?
    2. Is Material Part number maintained in material master? If yes, where can I find it?
    Thanks in advance.

    Refer below link
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/106f94ee-8dc2-2a10-a485-882871fa5c11
    I think Material Part number  & Material number both are same.

  • Divide a number into random parts

    I need to divide a number into a collection of random parts. So that the sum of all parts is equal to the number.
    E.g.:
    public void divideRandomly ( int number, int parts)
    int[] returnArray = new int[parts];
    //do random division calculations
    return returnArray;
    Lets say the number = 20
    And parts = 4
    I would then like to return an array of ints containing e.g. 3, 11, 5, 1
    OR e.g. 4,8,2,6
    Does anyone have a clue as to how I could do this?
    Cheers

    Be aware that given the wrong parameters this solution
    can take a long time to find a list. This seems misleading, as the termination condition is based
    on randomness. Although, it is possible to predict an average
    termination time.
    Basically your algorithm starts by generating initial random values
    in the range [0, maxValue]. You limit the size of the maximum
    generated value, although I'm not sure why. Obviously maxValue
    has to be greater than sum / length, otherwise it would be
    impossible to generate any combination values that add up to sum.
    Then your algorithm asks if the sum of those initial random values
    is equal to the target sum. If not, you cycle through the list replacing
    the the current position with a new random value and updating the
    current sum.
    As an example, let's suppose that maxValue is equal to sum, and
    that sum = 1000, and length (numParts) is 4.
    Assuming the minValue is 1, not 0, then the total number of
    permutations of 4 numbers that add up to 1000 is:
    165,668,499
    However, the total number of permutations is:
    1000^4 = 1,000,000,000,000
    In terms of probability, the chance of finding a solution on each try is:
    165,668,499 / 1,000,000,000,000 = 0.000165668499
    Thus, you'll need approximately 6036 loops on average to find a solution for 1,000 split 4 ways.
    For 2,000 split 4 ways, number of perms is:
    2000^4 = 16,000,000,000,000
    The perms of 4 numbers that add up to 2000 is:
    1,329,336,999
    Probability of finding a solution on each try is:
    0.0000830835624375
    Average number of tries is: 12036
    I'm impressed that the random approach is that fast.

  • If you install the program in Spanish, Can you switch to another language the part indicating the chapter's number?

    The company Aula24Horas has told to write a book in English.
    The part indicating the chapter's number is in Spanish.
    I would like to change it into English.

    Try changing the primary language on your computer to English.

  • SRM Material master search with Old material number or Manufacturing Part Number

    Hello,
    We have requirement to search SRM material with ECC old material number or  Manufacturing Part Number. Is it possible to enable this option in SRM.
    We are implementing SAP SRM 7.02.
    Rgds,
    Madhan

    Hi Madhan,
    The quick win can be to amend product search help to do RFC to ECC for old mat number.
    Regards,
    Ravi

  • The maximum number of Web Parts for all zones on this page has been exceeded.

    Hi All,
    I am getting following error message when making a new view for SharePoint Form Library
    The maximum number of Web Parts for all zones on this page has been exceeded.
    Any help in this regard will be greatly appreciated...

    When you are looking at the page append the following at the end of your URL:  ?contents=1
    Your URL should look something like this:
    http://contoso/site/default.aspx?contents=1
    This will open the web part maintenance page.  How many web parts are listed?  You might have a large number of closed web parts that aren't showing on the page but are actually still there.
    John
    SharePoint911: SharePoint Consulting
    Blog: http://www.rossonmoss.com
    Twitter: JohnRossJr
    MOSS Explained: An Information Workers Deep Dive into Microsoft Office SharePoint Server 2007

  • To Apple   I'm buy MACBOOK PRO 13" on 20 JULY 2012 @ apple store fifth avenue Part Number MD101LL/A Serial number C0******DTY3 They say can download update free for program OS X Mountain Lion when arrived But when i download

    To Apple
    I'm buy MACBOOK PRO 13" on 20 JULY 2012 @ apple store fifth avenue
    Part Number MD101LL/A
    Serial number C0******DTY3
    They say can download update free for program OS X Mountain Lion when arrived
    But when i download why it charge to me...
    I want my money back if not i want to return MACBOOK PRO 13" and will buy New One
    Best regard
    <Edited by Host>

    If you registered your computer after June 11th, you were entitled to a free upgrade to Mountain Lion. See http://www.apple.com/osx/uptodate/.
    If you went ahead an purchased ML before recieving your redemption code then you're just out $20. Not a big deal - you should have been instructed on how to get a redemption code for the OS X update.
    Clinton

  • Map BATCH number corresponding to ORDER number and Material number .

    hi all,
    i want to map the BATCH number corresponding to Material Number .
    i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
    so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
    but the batch number column is blank for all .
    and in case of table MCHA , these is assigned batch number to every Material number .
    also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
    so please suggest me the Possible way to resolve this .....
    sunny

    hi dsk,
    thanks for your earliar reply,
    actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
    how can i map batch number with corresponding to PO num ber, '
    in the report i used structure vbplp with field charg"(batch num).
    also i want to know from which table i can get customer part number and Po number .
    how can i add batch num ,..
    from which table or with which field i can compare itr to get .
    sunny

  • About the number of rows used to map data in Xcelsius

    Hi Everyone:
    I am using web services to fetch data into Xcelsius. The information I got from web service will increase in time and what I suppose is when I run out of rows to get all data I must open my Xcelsius model and select a greater range of rows on each component to get all the data that the web service is bringing.
    Is there an alternative to avoid modifying ranges of data in crontrollers when rows mapped are not enough for the data you are fetching from a web service?
    It is a bit confusing, I hope I've been clear enough. I really really will appreciate your opinions. If possible give me technical explanations.
    Thank you,
    Skull
    Edited by: skull_buck on Aug 6, 2009 7:40 PM

    Hi Greg
    Thanks for your fast reply.
    What you suggested is exactly what I am doing now, and also I increased the number of rows allowed to map en Xcelsius which are 512 by default.
    I would like to know now, how many rows are advisable to increase? Because I am using some components and you must specify for each one a certain number of rows.
    I test mapping 3000 and even 6000 rows but the model is too slow and I was not able to export the swf file in any format.
    Thank you again,
    Skull

  • Shipment document number and cost document number for vendor invoice

    Hi,
    Given a Vendor invoice number ( MIRO) how to find out the shipment number and cost docuemnt number?
    Regards,
    Krishna prasad.

    Hi,
    Please try using SREL_GET_NEXT_RELATIONS. Please try to search on SDN and you should find an example fo this. The only thing you need to pass is the Business Object Name for Vendor Invoice number. Or if you have an alternal field like even PO that you can pass , that will be of great help as well.
    You may want to take a look at:
    SREL_DISPLAY_LIST_OF_NEIGHBORS
    SREL_GET_NEXT_RELATIONS
    Pls reward points if useful.
    Thanks
    Ganesh.S

  • Convert Number to Sting in graphica mapping

    Hi
    I need to convert the number to string using graphical mapping in SAP PI 7.1
    Please share the posts if any,
    Regards
    Blue
    Edited by: hiddu4u on Nov 21, 2010 10:56 AM

    You can do this using mapping UDF; UDF code will b something like this:-
    int aInt = [input];   
    String aString = Integer.toString(aInt);
    Edited by: Samiullah Qureshi on Nov 22, 2010 9:41 AM

  • How do I let lightroom show the actrual number of files in a map and not a number including the total of all submaps?

    How do I let lightroom show the actrual number of files in a map and not a number including the total of all submaps?

    If by "map" you mean directory or folder, in the Library menu there is a toggle for "show photos in subfolders".

Maybe you are looking for

  • Colour issues when printing

    Hi, We have just installed a A3 HP Laserjet CP5225 printer. All is well apart from when printing PDFs from acrobat pro. For some reason greys are coming out green and other colours are off. When I print from the Preview App it prints fine so I am ass

  • Problem adding another email account curve 8310

    I am trying to add another e-mail account.  I go to the wizard, and the message I continue to get is "An error occurred while accessing your account.  Please click below to try again.  There is a hyperlink that says "Access Another Email Account".  W

  • Query Data from other Oracle Database into current

    Hi all, I have to query data from another oracle database into the current oracle database. Because the customer has standard edition, I cannot use a pipe. I tried "SELECT column_name FROM external_oracle_db.schema.table WHERE column_name = 'column_v

  • IMPROVE NOKIA

    Nokia, I just updated  t0 52.0.07 I am not aware of other models but my 5800 could use a little more brains in its functionality. Yes its great, but why: 1. My profiles are messed up. The pager profile seems to dominate all other profiles when it com

  • Error message-game can not be launched, error message-game can not be launched, error message-game can not be launched

    I was just listening to my music and] play a game at the same time. But when I start to load the game an error message pops up and say "This game cannot be launched. This may be the result of a full iPod". But I know for a fact that I don't have a fu