Vendor replication and exchange documents from SRM to SUS (using PI)

Hi Gurus,
We are implementing scenario plan driven procurement with suppllier collaboration on SRM 7.0.
Our architecture involve:
A server machine with SRM 7.0 (SRM server and SUS components both in this machine)
A server machine with Netweaver PI 7.0
A server machine with EP 7.0
A server machine with SAP R/3 4.6C
Now we are working on vendor replication process in order to carry out vendors from R/3 to SUS (on portal enviroment) and we made following steps:
- Replication of vendor from R/3 to SRM by mean tx BBPGETVD: OK
- Replication of vendor from SRM to SUS (on portal enviroment) by mean tx BBP_SP_SUPP_INI:
In this step we put the BP (created with tx BBPGETVD) on field "Supplier" but we obtained the Message no. BBP_XP004
"No vendor allowed for vendor portal"
So we want to know, in connection with mentioned architecture, the way to perform this activity in order to replicate the suppliers in SUS.
Is possible perform activities related to exchange documents (by mean Netweaver PI) between SRM and SUS (as necessary for our implementation scenario) if these mentioned components are installed and configured on the same phisical server machine?
What is the best recommendation about installation of SRM and SUS? A unique server machine or separated server machines?
Is there any inconvenience or technical reason having SRM and SUS in the same server machine?
Thanks in advance.
Regards,
Horacio

Hi Nikhil,
Thanks for your soon response.
Our process involve PR and PO manual creation in MM and then PO (with ALE message type) is routed to a supplier in SUS via XI. We could achieve that steps succsesfully.
We don´t have in scope neither use SRM for sourcing nor PO creation (via IDOC) in MM.
In connection with my previous explanation; Would you say that our process is MM-SUS?.
If yes, can I follow the steps mentioned in below link described at point u201CProcess Flow Without Supplier Registrationu201D?. What´s the difference between creating and replicating bussiness partner data?.
http://help.sap.com/saphelp_srm40/helpdata/en/c0/7a0859ee91d54aa48a69fb5d2c4089/content.htm
Thanks in advance.
Regards,
Horacio

Similar Messages

Replicate Vendor and Contact Person from SRM to ECC

Hi Expert,
I'm using SRM 7.0 and ECC 6.0 and using extended classic scenario.
any required to replicate vendor master and contact person from SRM to ECC, when we create vendor and contact person in portal, the result should display in SRM and ECC.
My question, Is it possible to replicate vendor and contact person from SRM to ECC? If possible, can you guide me?
Thanks and Regards,

Hi,
sorry..
this problem solved because our client change the business process.
we open screen ECC in portal SRM.
Thanks...

HT204053 how do i move page and numbers documents from one icloud login to another?

how do i move page and numbers documents from one icloud login to another?
I had to change my email address whcih meant new apple login.
I have a number of docs in iwork/pages and iwork/numbers. How do I transfer them to my new login?

There's a couple of ways but my tip backing up your documents in the cloud is as good as any.

How to upload and share document from pages

how to upload and share document from pages app?

Hello dannafromfl,
Documents can be shared via File Sharing to iTunes or via Email.
Pages for iOS (iPad): Send and receive documents in email messages
http://support.apple.com/kb/PH3564
Pages for iOS (iPhone, iPod touch): Share documents by connecting to your computer
http://support.apple.com/kb/PH3598
Cheers,
Allen

Process blocked sales and distribution documents from the SAPoffice inbox

Hi,
I know VKM1/VKM3 can be used to release order.
And SAP help shows we can process blocked sales and distribution documents from the SAPoffice inbox. Could anyone tell me how?
I can use output type KRML to send a mail to SAPoffice inbox, but don't know how to release blocked sales orders in the SAPoffice inbox.
Many Thanks
Jean

Hello Jean,
Release the blocked document directly via mail received:
- After carry out the step 4 in note 677377, you will be able to
release the blocked document directly by:
Display the SAP office mail recieved;
Menu: Document -> Execute;
Then you will be redirected to transaction vkm3, with the blocked
document number defaulted on that screen;
Unfortunately, it is not possible to direct your mails to Outlook
and release the document from VKM3.
Best regards,
Lela

Read parked and posting document from one FM

Hi all,
IS theere any FM avaliable to read parked and posting document from one function module.
Please let me know if anything is there.
Thanks

Hi T,
have u searched in SE37 with words park?,i'm sure we have few FMs which will do the same.
regards
Prabhu

Send documents from MM to SUS

Hello!
We use the MM-SUS scenario and I'd like to know, wether if it's possible to
send the document, which is attached to the position in the purchase order, to SUS, so that the supplier is also able to confirm document and version.
Thanks,
kind regards,
Barbara

Hi,
I know that it is possible to send documents from MM to SUS in the following case.
1) It is not possible to send the documents when you send a new purchase order from MM To SUS.
2)But it is possible to send documents from MM to SUS with the changed purchase order ( that is , you have to change the purchase order in MM).
3) for this there is some modifications (exit) to be implemented on MM system , there is one standard note available on the service market place for this, please search for that.
4)I have seen that the above mentioned note number ( i dont remember the number) talks about , Doc files (MS WORD) , but you have to go through the note for details (for other files like , PDF , JPG).

I'm trying to print an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape. That is I change it in printer settings but no use.

I'm trying to print an Ancestry document from an iPad 2 using air print. The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format. I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4. Please help

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4.
Please help
Latheesh K Contact No:+91-9747369936

This forum supports .NET Framework setup.
As your issue appears to have nothing to do with .NET Framework setup, please ask in the MVC forums for best support.
http://forums.asp.net/1146.aspx/1?MVC

When doing goods receipt and the movement from QA to unrestricted use there

Dear all,
when doing goods receipt and the movement from QA to unrestricted use there is an yellow error message
Error in EXIT_ SAPMM07_004 : Object 10462311E06/52,Char."LOBM_UDCODE,Value 01 A0,error"VALUE_NOT_FOUND"
Inspection Lot : 10000283512
System Status : UD ICCO SPRQ

Hi,
Did you use the follow up action in the UD code selection? It looks from the error that program is unable to find the UD code.
Kindly check the configurations in QM and see that everything is working fine?
Alternatively, if you are using the follow up action, then remove that first. Do the GR using MIGO -- this will create the inspection lot. Confirm the inspection using QA11 by entering the UD code for acceptance. Thereafter the the stock will rest in QI status. Use MB1B and perform the transfer posting with movement 321 to bring the stock to unrestricted use.
Regards,
Sushant

Vendor Replication and Different Back-end Systems

Hello,
Currently, we have vendor replication were the vendor number from the back-end is used in SRM-EBP. Now, we want add another back-end but there are vendor number conflicts. Is there a way to configure it so that the new back-end replicaition generates new numbers in SRM-EBP?
Honestly, there should be a cleansing and alignment of vendor numbers between the two back-end systems. However, that is big task that the organization doea not want to take on at this time.
Has anyone encounter this issue and how did you resolve it?
Regards, Dean.
Edited by: Dean Hinson on Feb 3, 2010 3:26 PM

Hi,
You can find option "If R/3 number assignment is not possible: Internal number assignment" in the bottom of BBPGETDV transaction screen.
Regards,
Masa

Vendor Replication or Creation Locally in SRM

Hi Gurus,
I am currently working on SRM 5.0 classic scenario. Backend system is ECC6.0.
Now, we are to configure the linking of another R/3 system SAP 4.6C version to communicate to the same SRM system. So, there would be 2 backend systems communicating with the same SRM system.
Now the issue is, the vendors have been already replicated from ECC6.0 to SRM system. It follows an internal number range from 0-99999.
Now, in the R/3 4.6C system, the vendor codes are internal from 0-8888. In this case, I understand that I wouldnot be able to replicate the vendors of this new system to SRM as there is an overlap of 8888 codes.
In such cases, I would have to setup local vendors i.e create vendors in SRM system (from the Manage Business Partner link in web page of SRM). Is there any mass upload program from a excel file for this application? Also, in this case, when I create a shopping cart, how will the system determine the backend vendor to create a PO as a followon document? Where or how is the linking between SRM local vendor codes to R/3 system done?
Also, do let me know in case anyone has any other solution to this issue of overlapping codes?
Points will be awarded for sure.
Thanks n Regards,
Ancy

Hi Ancy,
By standard the numberranges for business partners are split into two categories: External business partner, internal business partner.
I do not know a situation where seperate numberranges are used for different types of business partners however technically it is possibly. Whether it works very conveniently can be doubted.
Look into the following transactions (spro + Cross-Application Components + SAP Business Partner + Business Partner + Basic Settings + Number Ranges and Grouping/Business Partner Types):
1. Define Business Partner Types - create a new business partner type for your vendors
2. Define Groupings and Assign Number Ranges - Assign the newly created business partner type
Note: You can only have 1 std. int grouping and 1 std. ext. grouping (defaults).
3. Via transaction BP -> Create vendor and assign your newly created grouping
Hope this helps, still i wouldn't reccomend/go with this.
Kind regards,
Tim

R/3 Goods Receipt document from SRM.

We have a scenario where by a confirmation is entered onto SRM for a service by our dispatch clerk and this automatically creates a service entry confirmation and goods receipt document in R/3, that I can see in SAP transaction code MB03 and ML81N. The issue is that for the R/3 GR document and accounting documents that are generated in R/3 show systems user SRMRFCUSR as user who posted the GR & Confirmation and account documents.
Are any OSS notes or BADI codes available that would allow me to default through the SRM dispatch clerks user ID from SRM instead, i.e. CREATED_BY instead of SRMRFCUSR instead? We implemented similar logic for Purchase Orders in R/3 that replicated from SRM as they first showed system user WORKFLOW and OSS note 1180083 made it possible to display the actual user who entered PO document and not the system user between SRM and R/3.
Thank you.
Steve.

Hi
Please provide the System version details ->
Meanwhile, go through the following pointers which will help ->
Re: Problem to send idoc for a Good Receipt created
Re: Creating Confirmations in SRM - What is the preferred method
MB_CREATE_GOODS_MOVEMENT Idocs in status 64
Re: Replicating GR custom fields from EBP to SAP R/3
Re: Confirmation screen field to be mapped to backend field
Re: IDOC error in R/3 while creating a contract from SRM
Re: Error in IDOC BLAORD03
Other SAP Links ->
http://help.sap.com/saphelp_srm50/helpdata/en/75/33724080c8ca01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/0e/bc7d3c6715c854e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/87/7cc73cee4fb55be10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/4b/fe21419d6842b9861fade93597aab3/frameset.htm
Hope this will help. Do let me know.
Regards
- Atul

Transfer of Product Master and Contract data from SRM server to CAT

Hi,
We are using XI system to send product master data from SRM system to CAT (catalogue authorising tool) wherein both the SRM and the CAT add-on have been installed on the same web application server.
On the SRM-> XI part, we are going to use ABAP client proxy. My question is can we use ABAP server proxy to send data from XI to CAT ? In other words, is CAT a part of ABAP system so that we can use proxy ??
I am new to SAP environment and hence this question.
Regards
Ramesh

Hello Ramesh,
for uploading SRM master data to CCM u need not do any developements in ABAP , u have to just import SAP predefined SWCV's in Integration repository and configure required scenario "MasterDataInclusionInCatalogOnWAS" for u r corresponding WAS version.
U can download configuration document from service marketplace named " Configuration Fact Book CCM 2.0 "
Regards,
Keith

Excel VBA - Automatically checkout and checkin documents from SAP R/3

Hello,
I'm trying to implement some sort of automatic solution for checking out and in documents in SAP.
We have EasyDMS as Document Management System and need to reword about 10000 files which have a bug in their macro. For this purpose I created an Addin for Word and Excel that changes the macros automatically when opening a file. Due to security problems we cannot distribute this Addin to all Users (because you must deactivate macro security for enabling this Addin). So we thought about a possibility to automate the process and do the changes over weekend.
My idea was to write a makro in Excel that takes the information about the files (documentnumber, version...) form an Excel table and uses RFC to call a function that can checkout the files. On this machine the Addin would be enabled, of course.
I found the function "BAPI_DOCUMENT_CHECKOUTMODIFY2" and tried to implement the call via RFC, but I get an error.
The error says: Application-defined or object-defined error
I think the Problem is the data structure of the parameters.
Can someone figure out how I have to set up the parameters to get the function to work? I have no idea how this should be done, although I read some tutorials.
Thanks for your help!
regards,
Thomander
Here is my Code so far (I stopped because I get the error at line "objDocumentfile.Value = "Test 2.doc"):
Dim sapConn As Object 'Declare variant
Set sapConn = CreateObject("SAP.Functions") 'Create ActiveX object
If sapConn.Connection.Logon(0, False) <> True Then 'Try Logon
MsgBox "Cannot Log on to SAP"
End If
Dim objFunction As Object
Set objFunction = sapConn.Add("BAPI_DOCUMENT_CHECKOUTMODIFY2")
Dim objDocumenttype As Object
Dim objDocumentnumber As Object
Dim objDocumentpart As Object
Dim objDocumentversion As Object
Dim objDocumentfile As Object
Set objDocumenttype = objFunction.Exports("DOCUMENTTYPE")
objDocumenttype.Value = "PM2"
Set objDocumentnumber = objFunction.Exports("DOCUMENTNUMBER")
objDocumentnumber.Value = "A5N00030059989"
Set objDocumentpart = objFunction.Exports("DOCUMENTPART")
objDocumentpart.Value = "000"
Set objDocumentversion = objFunction.Exports("DOCUMENTVERSION")
objDocumentversion.Value = "D"
Set objDocumentfile = objFunction.Exports("DOCUMENTFILE") = "Test 2.doc"
objDocumentfile.Value = "Test 2.doc"
Dim objCheckedoutfile As Object
Set objCheckedoutfile = objFunction.Exports("CHECKEDOUTFILE")

Hello,
I'm trying to implement some sort of automatic solution for checking out and in documents in SAP.
We have EasyDMS as Document Management System and need to reword about 10000 files which have a bug in their macro. For this purpose I created an Addin for Word and Excel that changes the macros automatically when opening a file. Due to security problems we cannot distribute this Addin to all Users (because you must deactivate macro security for enabling this Addin). So we thought about a possibility to automate the process and do the changes over weekend.
My idea was to write a makro in Excel that takes the information about the files (documentnumber, version...) form an Excel table and uses RFC to call a function that can checkout the files. On this machine the Addin would be enabled, of course.
I found the function "BAPI_DOCUMENT_CHECKOUTMODIFY2" and tried to implement the call via RFC, but I get an error.
The error says: Application-defined or object-defined error
I think the Problem is the data structure of the parameters.
Can someone figure out how I have to set up the parameters to get the function to work? I have no idea how this should be done, although I read some tutorials.
Thanks for your help!
regards,
Thomander
Here is my Code so far (I stopped because I get the error at line "objDocumentfile.Value = "Test 2.doc"):
Dim sapConn As Object 'Declare variant
Set sapConn = CreateObject("SAP.Functions") 'Create ActiveX object
If sapConn.Connection.Logon(0, False) <> True Then 'Try Logon
MsgBox "Cannot Log on to SAP"
End If
Dim objFunction As Object
Set objFunction = sapConn.Add("BAPI_DOCUMENT_CHECKOUTMODIFY2")
Dim objDocumenttype As Object
Dim objDocumentnumber As Object
Dim objDocumentpart As Object
Dim objDocumentversion As Object
Dim objDocumentfile As Object
Set objDocumenttype = objFunction.Exports("DOCUMENTTYPE")
objDocumenttype.Value = "PM2"
Set objDocumentnumber = objFunction.Exports("DOCUMENTNUMBER")
objDocumentnumber.Value = "A5N00030059989"
Set objDocumentpart = objFunction.Exports("DOCUMENTPART")
objDocumentpart.Value = "000"
Set objDocumentversion = objFunction.Exports("DOCUMENTVERSION")
objDocumentversion.Value = "D"
Set objDocumentfile = objFunction.Exports("DOCUMENTFILE") = "Test 2.doc"
objDocumentfile.Value = "Test 2.doc"
Dim objCheckedoutfile As Object
Set objCheckedoutfile = objFunction.Exports("CHECKEDOUTFILE")

Vendor replication and exchange documents from SRM to SUS (using PI)

Similar Messages

Maybe you are looking for